CBT 3.4 can't read MC20x20 Line Card

Dear All,
I have a CBT (Cisco Broadband Troubleshooter) v 3.4 apllication installed in our network. However, it can't read MC20x20 Linecard in the spectrum analyzer for the example. I read in the documentation that is supported. In our system, it only can read MC5x20.
Is there some configurations to do that?
please help me if you have some experience to solve this issue. thank you
BR,
Ivan

I have try and find that the CBT 3.4 can't read MC20x20 in SCG/SCH IOS version, but it can read in SCD version. let me know if someone can use CBT3.4 and read in SCG/SCH IOS version.

Similar Messages

HT204384 my iMAC can't read the SD card. Any ideas?

My iMAC can't read the SD card of my Canon camera. I've tried reinserting slowly and quickly and dusting it. My camera can see the pictures on the SD card, which is only two months old. The same thing happened a few months ago. I figured it was an old card and probably damaged so bought a new one but this one has the same problem. my port was checked in store a couple of months ago too. I am running out of ideas....

fionten wrote:
My iMAC can't read the SD card of my Canon camera. I've tried reinserting slowly and quickly and dusting it. My camera can see the pictures on the SD card, which is only two months old. The same thing happened a few months ago. I figured it was an old card and probably damaged so bought a new one but this one has the same problem. my port was checked in store a couple of months ago too. I am running out of ideas....
How long has it been since you fully formatted the SD in the camera? I ask because some cameras are very good at messing up the card just enough that while they can read/write to it fine other systems may be confused. All it takes is a minor firmware glitch.
If you haven't hard formatted the SD in the camera for a while try downloading your pictures by connecting the camera to the iMac via USB. After the download is complete--and you have verified that it is full and complete--format the SD in the camera, snap a photo, then try connecting the SD directly to the iMac.
Might not work, but worth a try as it's free to do.
Another thing is to make sure that the firmware in your camera is up to date.

Hi, anyone can help me? I can't activated my ip4 after restored n updated and it's showed activation server is temporarily unavailable and the device can't read my SIM card,can someone please help me....thanks

Hi, anyone can help me? I can't activated my ip4 after restored n updated and it's showed activation server is temporarily unavailable and the device can't read my SIM card,can someone please help me....thanks

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

Can't read last line of SMS on 5530

Hi,
Just bought my new Nokia 5530 and out of the many issues I faced the one thats most annoying is I can't read the last line of a long SMS in the default view.
Let me explain....
If I recieve a SMS that is long and I have to scroll down (with the slider on the right) to read the complete message, The last line seems to be always hidden by the 'Forward/Delete' icons that appears at the bottom. I have to either go into the edit mode and scroll to the bottom to read the last line or have to go into options and change something when the last line would suddenly appear!
This is very annoying to say the least.
Anyone faced the same issue? Any resolutions please?

Hi,
Just bought my new Nokia 5530 and out of the many issues I faced the one thats most annoying is I can't read the last line of a long SMS in the default view.
Let me explain....
If I recieve a SMS that is long and I have to scroll down (with the slider on the right) to read the complete message, The last line seems to be always hidden by the 'Forward/Delete' icons that appears at the bottom. I have to either go into the edit mode and scroll to the bottom to read the last line or have to go into options and change something when the last line would suddenly appear!
This is very annoying to say the least.
Anyone faced the same issue? Any resolutions please?

TS1368 I can not read my itune card number 1/2 off $50.00 just by two hours ago

I cann't read my itune card 1/2 numbers our gone this is a number on button of card pbh6063300000277635976 got it at hy vee in wascea minn

See this support article:
http://support.apple.com/kb/TS1292
If you can't get the card to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I have an iphone 3GS. i updated it to the latest software but it can not read the sim card plse help me

i have an iphone 3gs that i updated thia evening to the latest software but the problem it could not read the sim card plse any help

Your iPhone was hacked to unlock it. Now that you have updated it has cleared that hack and is locked with the original cell provider. Call AppleCare and give them the model and serial number and they can tell you the cell provider it is locked with. Then contact that cell provider and see what their unlock policy is and if you qualify.

Lumia 820 can't read my SD card

Hi,
I've got a strange problem with my microSDHC card (ADATA 16GB Class10). My 820 can't recognize it. There's no 'problem information' - the smartphone just doesn't see it. There's only internal storage able to use... I've done phone reset, I've done card formatting (to FAT24, ExFAT, NTFS) but there was the same problem every single time, again and again... I spent a lot of time and cash for buying this lumia and the card and now I am disappointed despite the smartphone is great... But without the storage it's almost useless.
Can you help me? What can I do? My card seems to be fine, because my notebook reads it perfectly. I can save and read files with no problems so I've got no idea what is going on...
I need help as soon as possible, so please write me back, thanks guys

Sidek wrote:
thanks for your response. Yes, now I see it but there are many people who have class10 and no problem with it.
Strange, what I see is almost exclusively people with Class 10 which have the problem. I am not aware of any MS updates which are specifically directed at solving this issue, although that does not mean that there isn't one in the works.

How can I read a line of numbers in a file?

Hello everybody,
I have a ziped.file organized in this way:
number1 number 2 number3 name1, name2, name3
number_of points information_about_number_of_point
number4 number4 number4 number4
number4 number4 number4 number4
number4 number4
number5 number5 number5 number5 number5 number5
number5 number5 number5 number5 number5 number5
number5 number5 number6 number6 number6 number6
number6 number6 number6 number6 number6 number6
number6 number6
My problem is to save number1 number 2 number3 and in number_of points in 3 different variable, and number4 number5 and number 6 in 3 different array. How can I do this?
The beginning of my file is:
10000 3.50000 0.00000 Teff, logg, [M/H]
52790 number of wavelength points
1.000000000000000e+01 1.200000000000000e+01 1.400000000000000e+01 1.600000000000000e+01 (end of3th line)
1.800000000000000e+01 2.000000000000000e+01 2.200000000000000e+01 2.400000000000000e+01 (end of 4th line)
The number 52790 is the same for number4, number 5 and number6.
Number4 are organized in 4 columns, number5 and 6 in 6 coloums and the spacing is always the same.
Could you help me please?Thank you and sorry for my terrible english!

I'm not sure if I understand completely, but basically you just need to read & parse your files.
Use a lexer/parser tool like JavaCC if it's advanced parsing, or if it's something very simple (like assigning variables) then you can just use the String.split() method to break up your file into tokens. See below for examples of the "simple way"...
If you have any questions, don't hesitate to ask!
I need to save my informazioni in this way:
var1=number1
var2=number2
var3=number3If you wish to access these variables in a Java program, you could split up your file into tokens and then place the values in a map (variable/value pairs). I don't know how efficient this is, but it works nicely. You can change this for arrays, objects, etc.. right now it's only set up for ints.
Here's a very simple example with some code. Below is the text file...
my_var = 123
my_age = 16
x_pos = 2
err=2 //syntax error. must separate tokens with whitespaceTo get your variables from the text file:
Map<String, Integer> map;
//read text file and put it into string
//then use tokenExample to get a Map for that string
map = tokenExample(textfileString); //see below
//and finally assign your variables
int my_var = map.get("my_var");
int my_age = map.get("my_age");
int x_pos = map.get("x_pos");
The tokenExample(String) method
This method breaks the speified string into tokens, and returns a Map with all of the variable name/value pairs in the string.
public static Map<String, Integer> tokenExample(String text) {
     //Sets up our tokens.
     final String ASSIGN   = "=";
     final String NUMBER   = "\\d+";
     final String VARIABLE = "[a-zA-Z]([a-zA-Z]|_|[0-9])*";
     //Map for our variable/value pairs
     Map<String, Integer> variables = new Hashtable<String, Integer>();
     String[] splitText = text.split("\\s+"); //Splits by whitespace
     String varName = null;
     boolean assigning = false;
     //cycles through each token and decides what to do
     for(String value : splitText) {
       //if it's a variable, we set up it's name for later
       if (value.matches(VARIABLE)) {
          varName = value;
       //if it's an assignment operator, we get ready to assign the variable
       else if (value.matches(ASSIGN)) {
         assigning = true;
       //if it's a number, we put it into our hashmap
       else if (value.matches(NUMBER)) {
            //if there's no problem with the last two tokens
         if (varName!=null & assigning==true) {
           variables.put(varName, Integer.parseInt(value));
           assigning=false; //reset for next time
           varName=null;
       //some sort of syntax error
       else {
         assigning=false;
         varName=null;
         System.err.println("Syntax error: cannot find token "+value);
     }//end loop
     return variables;
}See also:
http://mindprod.com/jgloss/regex.html
http://java.sun.com/docs/books/tutorial/extra/regex/
http://www.javaregex.com/tutorial.html

I just recently purchased an Iphone 5c. I damaged the sim card reader by accident and now the phone can't read my sim card. I was wondering if I can bring my phone in to an apple store and will they install one into the phone for me? And if so how much $$

So can I bring the Phone in to get a new sim card readser repaired? And if yes would the one year warranty every ihpone have cover the repair, or will I have to pay. And if I have to pay, about how much money will it cost.

Contact the Apple store and ask them.
Officially Apple does not sell parts.

ITunes can't read my media card

I can't burn to a CD from iTunes, but can burn to a CD using other software

Can anyone suggest where to download Ifun box? I downloaded a version from what I thought was a reliable it and it was full of spyware. Got rid of the spyware (I think) but it was tremendous headache and I still have the original I phone problem (not being read by itunes). Thanks.

HT4489 Can iCloud read a v-card (.vcf) exported by Outlook 2003?

I just set up iCloud and got my iPhone contacts up there. I noticed it will import & export v-cards. I tried exporting one but have no idea where it went on my PC (Windows Vista). I tried importing one which I had exported from Outlook 2003 but got a message that there was a problem. Here's the text of my v-card (with the personal data changed):
BEGIN:VCARD
VERSION:2.1
N:Wilson;George
FN:Wilson, Geroge
NOTE;ENCODING=QUOTED-PRINTABLE:12/24/2011: I think she is in our Book Club. Friend of Janet's. I was suppos=
ed to contact her on Facebook.=0D=0A
EMAIL;PREF;INTERNET:[email protected]
REV:20111224T152448Z
END:VCARD
Any ideas?

Is anybody who knows anything at Apple reading all these posts. Nobody can import a vcard into icloud. Schmucky software by Apple.

How can I read a SDHC card on my iMac version 10.6.8

I have been able to import the old SD versions, using the port on the side of my keyboard. The same reader does not work with the new SDHC card.

Check your Readers class, see > Secure Digital - Wikipedia, the free encyclopedia
If it's to old, then you will need a newer one. > usb card readers - Google Search

Can't read my iTunes card code

Anyone know how to redeem an unreadable iTunes code ?

With any luck, the following document may be of some assistance with that:
iTunes Store: Invalid, inactive, or illegible codes

Portal application can't read request info

hi all,
i use portal application for change portal user's infos.but when i sent request info,
request.getServletRequest().getInputStream() method is cutting my sending line after 90. character.
in R3 side i use HTTP_POST function and fill request info (table paramater).
i tried to send 2 line(less than 90 character) in request info, but i can't read second line in java code.
Is IPortalComponentRequest accept only 90 character ?
how can i solve this problem , any idea ?
my code is below, variable "str" is filling only first 90 character;
     protected void doOnNodeReady(
               IPortalComponentRequest request,
               IEvent event) {
     String str = "";
     try {
          InputStream is = request.getServletRequest().getInputStream();
          InputStreamReader isr = new InputStreamReader(is);
          int c;
          while ((c = isr.read()) > -1) {
          str = str + (char) c;
            } catch (java.io.IOException ex) {
             str = "Error accessing input stream";
thanks

New discovery...If I shut down all instances of IE on my machine, then reopen my test form, it works. Once. The second time I try it I get the same peculiar behavior again, until I again shut down all instances of IE.

How to read every line from a text file???

How can i read every line from my text file ("eka.txt")
now it only reads the first line and prints it out.
What is wrong with this?
import java.io.*;
import java.util.*;
class Testi{
     public static void main(String []args)throws IOException {
     BufferedReader stdin=new BufferedReader(new InputStreamReader(System.in));
File inputFile = new File ("eka.txt");
FileReader fis =new FileReader(inputFile);
BufferedReader bis = new BufferedReader(fis);
String test=bis.readLine();
String tmp= "";
while((bis.readLine().trim() != null)) {
int spacefound=0;
int l=test.indexOf(" ");
     for(int i=0;i<test.length();i++){
     char c=test.charAt(i);
     if(c!=' ') tmp+=""+c;
     if(c==' ' && (spacefound<1) && !(tmp.equals(""))){
     tmp+=""+c;
     spacefound++;
     if(tmp.length()==l) {
     System.out.println(tmp);
     tmp="";
     spacefound=0;
     if(tmp.length()<l){
     for(int i=0;i<=(l-tmp.length());i++)
     tmp+=""+' ';
     System.out.println(tmp);

Try this code, Hope it servers your purpose.
import java.io.*;
import java.util.*;
class Testi {
     public static void main(String []args)throws IOException {
          BufferedReader stdin=new BufferedReader(new InputStreamReader(System.in));
          File inputFile = new File ("Eka.txt");
          FileReader fis =new FileReader(inputFile);
          BufferedReader bis = new BufferedReader(fis);
          String test=bis.readLine();
          while(test != null) {
               StringTokenizer st = new StringTokenizer(test," ");
               while(st.hasMoreTokens())
                    System.out.println(st.nextToken());
               test = bis.readLine();
}Sudha

CBT 3.4 can't read MC20x20 Line Card

Similar Messages

Maybe you are looking for