CC#1 resetting at the start of every loop - bug ???

Make a 1 bars bas pattern, (internal or external synth with mod-wheel/CC#1 assigned to filter cut off) and loop it. On another track, same midi channel, i record a mod-wheel movement (filter sweep) more than 1 bar, say 4 bars, starting from 0 and moving to max. This is now a filter sweep with a length of 4 bars. Everytime the bas pattern repeat it self, (every 1 bar - because of the loop)the mod-wheel/CC#1 jumps back to zero, until it recieves the next mod-wheel info from the 4 bars sweep.
I have to use "make loop into real copies or alias" to make it work.
Is this a bug ?
nice regards
Henning Flintholm
G5 dual 2.0 Mac OS X (10.4.8)

To prevent CC#1 resetting of internal instruments check the track parameter box 'No Reset'.
Also, make sure that in Preferences > Audio > Reset the CC#1 box is NOT checked.
For resetting external instruments see Preferences > MIDI > Reset Messages
PPC G4 Mac OS X (10.4.8) Logic 7.2.3

Similar Messages

Music cuts out at the start of every clip.

Hello I really need some help with Adobe Premiere Elements 8. Ive made one project and I go to add music to it and once it loads and everything is fine i press play and right at the start or very close to the start of every new video clip, the music cuts out, I pause and play the project and it works again! Untill you run into another clip and then it cuts out! Very frustrating, ive been using elements for a while now and I cannot figgure out what it is. Please Help!!

Hey, thanks for replying so quickly,
I converted the audio files to the .wav that you suggested. And no change, a bit more of an update with the problem; I find if at the start of every clip it cuts out, I am able to rewind a bit and wait for it to reload, and it works fine, but on initial playback it cannot. Also with a different movie I made it worked fine because the clips I used for it were all running at 100% playback speed. The ones I am having the trouble with are running at maximum speed (10,000%). I was also informed that I should tell you I am using a laptop, and therefor I have only one HDD if I am correct, (not very computer literate) and its a 250 GB, with 4GB of RAM. Running with about 60 GB of free space. I tried to look in control panel for the other information you requested and was unsuccesful. Maybe let me know where to find it and I can let you know.. And in the end I am assuming that Premiere is glitching out because of this small computer..........
I appreciate your help.........

ITune tracks jump at the start of every tune

Hi everyon. Hope someone can help. first time I have used discussions. When I play trcks from my pc most trcks jump or skip at the start of every song.

Same thing here, I am hoping someone has a suggestion. This did not happen prior to the 7.7 update yesterday. For me this is happening on one of about every 10 tracks or so.

Volume auto-lowering at the start of every track

Yes, as the title of this post suggests, the volume auto-lowering at the start of every track.
I play tracks at random out of my collection of over 4000 tunes. They all have different setting for equaliser, volume, etc. but that should make every track auto-adjust its volume down.
What happens is this:
A new track start playing. Within about 1-2 seconds iTunes adjusts the volume down. It is very audible and...very annoying.
I don't particularly care why this is happening. I just want to know how to stop it.

"that should make every track auto-adjust its volume down"
SHOULD READ
"that should not make every track auto-adjust its volume down"

Which system variable is reset at the exit of a loop of an internal table

which system variable is reset at the exit of a loop of an internal table
a)sy-loop b)sy-index c)sy-dbcnt d)sy-tabix

You might want to revist your threads from Friday, and award points and mark as "Answered" or "Solved".
Regards,
Rich Heilman

How do I have a totalizer reset at the end of every month?

We are using Lookout 5.1 in an application that is receiving a Modbus input giving us a totalizer value. We need to have this value reset to zero at the end of every month. Also want the monthly total to be sent to an excell spread sheet. All help is much appreciated.

I think this NI Post will help you out....
Regards

Why does Googlemail not appear on the Start Page every time instead of going all through "more" and " even more etc, plus having to sign in even though I have ticked the Stay signed in box?

There is no consistency when one gets the Mozilla Firefox Start page.There is a line as follows :
Web Images Maps News Shopping Books more
To get Gmail one has to click on "more" which gets one a dropdown menu which ends in "even more" Clicking on this takes one to a page headed "Even More Google Products", including (Hurrah!) M Gmail.
Click on this and one gets the page where one signs in, even though I have ticked the box entitled " Stay signed in" and at last ones's e-mail page turns up. Very occasionally, instead of Books or Shopping on the Start Page "Gmail" is there which when clicked on takes one directly to one's e-mail.It seems a hell of a rigmarole just to get one's e-mail!

You can set Firefox home page to one of your choosing, see [[how to set the home page]].
If the keep me signed in option is not working, you may have a malformed cookie. Try deleting Google/Gmail cookies, for details on how to do that see [[deleting cookies]].

How to get the start of a loop to sustain???

I am trying to end a song with a sustained note taken from an existing loop. That is, I would like just the starting note of the loop to sustain itself for 4-5 seconds at the end of the song. But I can't seem to get this to work smoothly. I've tried cutting the loop down to just the starting note, then copying this note many times and seaming the notes together, but this makes a trilling sound instead of one smooth and sustained note.
Any ideas how to do this? Thanks.
imac G5 Mac OS X (10.4.7)

It's very hard to "stretch" audio notes. You don't specify what instrument it is, so it's hard to give a detailed advice. But in general the notes have an "attack" part where the note starts, a "sustain" part where the note is held, and a "decay" part. What you want to do is extend the sustain part of the note, if it's long enough. In the waveform, it should be a band that looks rather uniform. Try to copy it several times by cutting and pasting so that the result looks smooth. With a little luck, the cuts aren't too noticable.
Or put a long delay at the end of the note.
But generally: No, you can't do it, and you can't turn a real region into a software region.

Acrobat re-installs at the start-up every time I use the computer

Every time I start a computer Acrobat keeps re-installing.
First I get a message "Preparing to install" from the Windows installer.
Then I get a message "Please wait while Windows configures Adobe Acrobat".
And then I get a message "You must restart your system for the configuration changes made to Adobe Acrobat pro to take take effect. Click yes to re-start or No if you plan to re-start later."
If I click Yes, then after a re-start it all start from the beginning - I get a message "Preparing to install" again...
If I clink NO, I can use the Acrobat Pro, but this message is very annoying.... Also, it takes extra time before I can start using the computer...

Please back up your computer before starting any remedial action. System Restore is not sufficient for any catastrophic problems. First, I do not recommend the use of any 3rd party registry repair software. If you stick to using the original publisher's software to isolate and/or fix any problems you will generally be much better off.
In general, when you see the installer running right after trying to start an application, it means the installation is corrupted. Therefore, that's where I would begin troubleshooting.
After BACKING UP YOUR SYSTEM, I would try the following:
1. Uninstall the application.
2. Clear the Windows logs
3. Disable User Account Control
4. Disable any third party software which might be conflicting.
5. Reboot, if necessary, and then reinstall with Administrator privelages using the following procedure: http://kb2.adobe.com/cps/400/kb400682.html
6. Upload (attach) your log to your next post so other people and I can look at it.
7. Check your Windows Event Log for error messages related to the installation routine. Copy any installation error messages to your post.
I'll take a look at the resulting log for unusual events.

How do I insert a logo/brand clip I made at the start of every movie?

Hi I just put some time into a logo/brand that has music and graphics I want to add to every clip how do I do that. Thank you for any help.

Does this logo have anything that changes with every project, like a date or a title? If so,...
In iMovie, the best way to do this is to put your logo clip into a Project. Give the project a name, like LOGO TEMPLATE.
Then, when you want to make a new project, go to the Project Library View, select your LOGO TEMPLATE project, and click FILE/DUPLICATE PROJECT. Give this project a new name and you are ready to edit.
If it is a standalone logo clip that needs no editing, just Share your logo clip using SHARE/EXPORT USING QUICKTIME. Choose Movie to QuickTime Movie, and choose Apple Intermediate Codec as the codec.
Then you can import this clip into an iMovie Event and use it over and over.

Downloaded Smurfs and bought loads of Smurfberries. The game has failed on my Iphone and has reset to the start. How do I get the game back to the level I was on or a refund for the purchases? Thanks

İ bought smurfberies with my iPad but i want to refund it.What can i do?

Contact the app developer.

When the integral function is placed inside a wait until next ms multiple is it reset at the beginning of each loop?

When the integral function x(t) is placed inside a wait until next ms multiple while loop is the Integrator reset to zero every time the loop executes?

Hi,
the function works on a discrete amount of data. Hence every call to it replaces the values used first time around.
I've attached an example in LabVIEW 7.0 that uses a pulse generation vi to allow the manipulation of the array sent into the integral object, and then it's easy to calculate what the integral of the data would be.
Hope that helps
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer
Attachments:
integral.vi ‏39 KB

Running Sum does not reste at the start of new period

Hi Gurus,
I am using function Running SUm for a variable. The problem is our Fiscal period starts in September. SO the running sum should reset at teh start of every period. but its not happening.
Any Idea why?
Regards

Hi,
As I see it
num RunningSum(measure[;Row|Col][;reset_dims])
You are using to many variables for reset_dims, if you wanna do it this way, create a variable and add this v_FY_Sort_1;Output;Site to that variable then use
RunningSum(COGM RM Cost Total Amt Actual; variable)

Energy Management software keeps making shortcuts in the Start Menu

I just recently reformatted my laptop and installed Windows 7 Ultimate. I got the drivers from my laptop model's download page in the Lenovo support website, and everything was working fine - except for when the Lenovo Energy Management software would keep making shortcuts in the Start Menu every time I reboot the system.
I had my Start Menu organized, created folders to categorize my apps, so it's really annoying when a folder I already deleted pops up every time I start my laptop. Why does it happen? Is there a fix for it?

Hi Pommy,
Welcome to Lenovo Community!
I’m sorry to hear that a shortcut is automatically getting created, I would suggest you to re-install the LEM (Lenovo Energy Management) in the computer and while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
Do post us back if the issue persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

TS2289 A yellow warning icon appears at the start of each clip.What does that mean?

Hi ,
I have just discovered Imovie and started to download movies from Iphoto to imovie.
Everything went well untill this morning when i noticed a yellow warning icon at the start of every clip, and now the clips will not play.
How can I diagnose the issue.Is it a lack of space on the hard drive.?

The yellow warning sign usually means that iMovie cannot find the Event clips that the project needs to do the movie. This can happen if the Event was on an external drive and the external drive is no longer attached.
It can also happened if the Event clips have been moved, renamed, or deleted.

CC#1 resetting at the start of every loop - bug ???

Similar Messages

Maybe you are looking for