CC 2014.1 AJA LHI worst performance/ sluggish

Hi there,
till the CC 2014.1 Update its nearly impossible to work with my aja kona lhi card.
When i enable the Breakout Card in the playback setting i get bad choppy audio and sometimes only the audio peakmeter waves and no sound reaches the speaker. Another thing i realised as soon as i turn on AJA the responsibility of the UI goes down as well as video on the pc displays only plays choppy (like slow motion/ chewing gum). I realized some of these small laggy behaviors till CC 2014 i put the blame on hard projects i was working on.
My workaround turn of AJA and connect client monitor via GFX card HDMI everything works.
Anyone else has this kind of problems, or with other third party hardware (Blackmagic, other Aja Cards)
Hardware:
Adobe CC 2014.01
Win 7 64bit
Nvidia Geforce GTX 680
Dual INTEL Xeon E5-2687W 3100MHz 20M Cache 8Core
64GB Samsung DDR3-1600 CL11 ECC reg
2x INTEL SSD 520 Series
8 TB SAS Raid

Hi Kmueller,
Check out this post on Creative Cow: https://forums.creativecow.net/readpost/3/959351
Hope that helps.
Thanks,
Kevin

Similar Messages

CC 2014 - another noticeable degradation in performance

Hi all, just posting up to get a consensus on the current performance of CC 2014, for me, I've found it to be another very noticeable downgrade, to the point where its not useable for me in my workflow. I've since deleted 2014 and am hoping it doesn't replace Illustrator CC any time soon.
While I love the new pen tool and general accuracy of selecting anchor points and closing paths, it seems to have brought with it a very noticeable lag in selection and laying out points. In previous versions I'd say it performs like having Smart Guides enabled on a complex file, only with or without Smart Guides enabled in CC2014 the lagginess remains.
The file above is used as an example of the problem I'm having, its a small, relatively basic file. In Illustrator CC, when selecting the paving on the left, I get minimal to zero selection lag. When selecting that same area on Illustrator CC 2014, I get a 0.5 to 1 second delay, with or without smart guides enabled.
I have a late 2012 iMac, fully upgraded with best videocard, fastest processor and 32gb of ram. I run my apps off a small local SSD and the artwork files of a Thunderbolt RAID array. It doesn't matter where I put the artwork, local, or RAID, the performance issues are the same.
Anyone having a similar experience? It seems to me with every release or update, Adobe says it comes with "Improved performance" but I've yet to see any release that performed better than the previous.

Hello Crispe,
Could you please share with us the test file @ "[email protected]" so that we can reproduce the problem at our end? Please be assured that your test file would solely be used for reproducing the issue and won't be shared elsewhere.
Please include the link (CC 2014 - another noticeable degradation in performance) in the mail you send.
Regards,
Dhirendra

Aja LHi analog audio i/o clipped

Is anybody run into this LHi audio problem? The audio in & output was clipped by Aja LHi card? It turn balanced to unbalanced audio. I'm sure it's not my setup cos' it dosen't change anything before & after. Is it the card failed? I've heard some of the LHi did.

Are you routing this audio through a mixer first? You really need to. Analog really needs a mixer.
Shane

Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit

Updated Illustrator CC to CC 2014, having problems with CC performance. Slow and does not quit. What can be causing the issue?

Hello, please checkout my post concerning lagging issues.
I've also provided a link to a video I've recorded showing the Illustrator behavior on my iMac 27"
Adobe Illustrator Cs6 Lagging Extremely Slow on Yosemite 27" iMac i7 late 2013

While in Indesign CC 2014 i am unable to perform a color separation to Acrobat DC 2014

While in Indesign CC 2014 i am unable to perform a color separation to Acrobat DC 2014. Is there a fix to this?

You can export using one of the PDF/X presets from InDesign and then print separations from Acrobat DC via Print>Advanced>Color>Separations.

AJA Lhi

I am using an AJA Lhi card in my Mac with PP CS4. I am capturing by component from a Sony HDV camera. I would like to speak with someone who uses this setup and can give me the configuration that they use that makes everything work. So far my problems are that the output monitor has vertical lines in the test pattern and now when capturing on the video. And audio is not coming through the mixer to the card...but it does show on the mixer and comes out the AJA card via the board to the studio speakers. I know this is just trial and error but it would be nice and cut to the chase with someone who has been there. I've been using compressed DVCPRO HD 1920x1080 8 bit as the capture codec. Any one one out there with the same set up?

is your camera a "Tape" camera or other storage format.
if Tape and not capturing Live (direct input to computer) there is no point to bringing it in any other way than firewire.
if not tape or you are capturing live then it may make sence. as you may be able to bring it in uncompressed.
(assuming your drives are up to it)
Scott
ADK

Aja lhi mac

How do I set Premiere so I can see video on my monitor through the AJA LHi card?
Sorry new user with premiere.
Works with FCP.
Thnaks,
Jim

Use an AJA sequence preset; one of the Adobe defaults won't work. They should be installed when you install the drivers.

Worst performance of AIR for Desktop on PC

Hi,
I've been using AIR for mostly developing Android projects for my clients recently. And so far it's been pretty good for that.
I have noticed before and specifically with my current project, which is also simple branded Android app for a client, the performence of AIR on Desktop is worst of all my Android devices. When testing the app on PC, (ctrl + enter in Flash Pro) when simple animations starts, AIR takes 100% CPU on all cores on my i5 Dell with Intel HD4000 and Nvidia GF630M.
I was expecting it to run supper smooth on PC, while surprisingly, the app performs smooth on almost 3 years old Samsung Galaxy S2, then Galaxy Tab2, then chinese tab, and lastly comes PC, performace wise. For mobile, I have set the app to use GPU, and while testing on PC, I have tried all the "Render mode" options, but performance is exactly same.
I am not using Stage3D/Starling. It's just classic Flash, with timeline animations, and AS3 document class to make it all interactive.
Is it a must to use Stage3D/Starling combo to get same performance as on mobile, even for classic timeline style apps?
I thought Flash was getting improved on PC the most, but it feels like other way around :/
// chall3ng3r //

Yes, I have tried debug and regular test, no diffirence.
I have noticed that as three timeline animations stop one by one (they are not too big graphically, it's just a slot machine app), performance gets better. But, still not compareable to GSG2. I'm not using any filters, I did applied the motion-blur in Photoshop in alternate gfx, and just use that when in running state.
Edit: also, i've tried with latest beta build, and latest release build. it's same.
// chall3ng3r //

How to monitor worst performing sql statements

Hi,
I am new to oracle 9i release 2. I come from the Windows world, where we used sql server.
When we performanced tested our product, we always monitor the worst performaning sql statement using the sql profiler. At the end of a 24 hour test, the profiler will list the sql statement with the longest execution time. What is the equivalent Oracle 9i tools that will allow me to monitor the worst performaning sql during a test that lasts between 10 to 24 hours?
Thanks,
Paul0al

Besides statspack and OEM you have a few other options.
If an SQL statement had been identified as performing poorly or a job that you can extract the SQL from then you have the option of explaining all the SQL statements and just reviewing the plans for reasonableness. You can also trace actual execution of the task or individual statemnts (alter session set sql_trace = true for basic 10046 event).
When the SQL has not been identified in advance you can query the shared pool SQL areas for SQL statements that have relatively high physical, logical, or combined IO counts. Then you can perform tuning activities for these statements.
HTH -- Mark D Powell --

Premiere pro CC 2014 with Aja Kona playback issue

After last Premiere pro update, have big problem with aja kona Lhi playback. After 5 sec of playback video and audio freezes. After 5-10 sec it start playing but very badly. Video strobing and audio jumping. then it freezes again. When i turn off Aja playback all fine. I have done all settings correctly following instructions. Audio output in preferences other than Aja and etc.
I have this problem on both computers with OSX Maveric and Aja Kona cards.

After last Premiere pro update, have big problem with aja kona Lhi playback. After 5 sec of playback video and audio freezes. After 5-10 sec it start playing but very badly. Video strobing and audio jumping. then it freezes again. When i turn off Aja playback all fine. I have done all settings correctly following instructions. Audio output in preferences other than Aja and etc.
I have this problem on both computers with OSX Maveric and Aja Kona cards.

Aperture Performance Sluggish When in Full Screen Mode

Hi
I have an iMac 3.06 GHz with a NVIDIA GeForce 8800 GS:with 512 MB of VRAM and 4GB of RAM and every time I go to Aperture's fullscreen mode performance is sluggish. When I click on buttons with my mouse it takes them about 3 to 5 seconds to actually realize they've been clicked. Also when I try to adjust something in a HUD, it takes forever to register my command. I would love to be able to use full screen mode because of my big screen on my iMac but it's really not worth it if it's this slow.
All help appreciated
Thanks in advance
macdiscuss

My problem has been solved. It was just my particular photo.

I cannot get my AJA LHi to communicate with any of my decks.

I checked all the connections (over and over), but Log and Capture says "no communication." I used AJA two weeks ago to import 3/4" and it worled fine, but now it's not working (on any of my decks). For my project, I need to import Beta SP, 3/4" and Hi 8 mm. I have a deadline and need to get this problem resolved ASAP. I'm not technically savvy, so any hekp will be appreciated!
Thanks so much!
Micki
Pro Bono Productions

When you installed the 9900 did the driver install into Windows 8.1? When install my Epson 4800 on my Surface Pro as a network printer the epson drivers were installed ans images get spooled across my home network and I can even see the ink level left in the printer from remote machines. Can you print a test from windows 8.1 on your 990? My 4800 is on a windows 7 machine though. It still works from a windows 8.1 machine.

Satellite M30 slow booting, performance sluggish & HDD activity light on most of the time

Have the above issue with my laptop. It used to run faster than my desktop but performance has degraded. Runs XP SP2 and Norton Internet Security and Norton System Works. No errors show when running Norton Tests. Have reformatted hard disk and reinstalled software but little difference.
Laptop takes @5 mins to boot. Opening Outlook takes 10 seconds. Hard disk light is on most of time so wondered if hard disk related.
Any ideas?
Many thanks.

Hi,
Download Hirens Boot CD (if you have a fast internet connection, as the file is 65MB). This CD has quiet a few tests you can use for HDD. HDD regenerator for instance will repair any surface damage on the disks etc. As will a few others. Hope this helps.

IMovie 09 as a slideshow-performance sluggish

Just started using iMovie 09 for my first project which is approx. 24 mins in length, it is a slideshow with stills, music and transitions added. Whenever I tap the space bar to watch the preview, the playback is choppy, the music pops, and frames occasionally appear as black or the wrong slide entirely. I was under the impression that 8 second stills took up far less memory than video footage. I don't care if the preview is choppy, so long as the export comes out smooth.
I read in the posts that it was recommended to keep iMovie down as a short 20 min film, I thought I had that covered. I also read that breaking the project into smaller parts. Tried that, and I still get choppy playback. Any suggestions?
Thanks,
Carl
Message was edited by: carlart
Message was edited by: carlart
Message was edited by: carlart

I did, with no effect. I currently have 2 GB of Ram in my G5 Tower
Message was edited by: carlart

New Macbook Pro / Leopard - Choppy graphics performance, sluggish animation

I just got a new Macbook Pro Core 2 Duo 2.4GHz 15" featuring the new Nvidia 8600m graphics processor. I previously had the Core Duo Macbook Pro that had the ATi Radeon x1600.
I was expecting the new macbook to be smoother, if not leaps and bounds smoother and more responsive graphically when compared to the previous model. For example, anything animated in Leopard is choppy and staggering like Dashboard, Genie effect, scrolling web pages in Safari. It almost seems like the video card is struggling, or there are driver issues with the Nvidia chips in Leopard and they are not mature yet. Even videos in Quicktime are noticeably choppy. I have tried installing Tiger and the problems are gone, everything is smooth like it should be. I then did a clean re-install of Leopard and choppiness resumed.
Can anyone shed some light on this issue? I've been reading similar reports from others across the web and all seem to point to Nvidia driver issues that could be resolved in 10.5.2. Thanks.

I have the same problem but with my dock. For example the right side of the divider if I have a couple of windows minimized ( safari, finder) and drag a file ( text, .jpg , etc) and move it around the minimized windows move in a very jerky fashion ( to allow space for the file). I had at first just blamed 10.5 because the dock is more fancy then the tiger one, but my girlfriend owns a black macbook and her dock is about 5 x more fluid then mine ( never jerky ). I don't understand how this is possible when my macbook pro have a much better graphics card? I have deleted the plist, downloaded programs to set the dock to default settings. All with no luck.. I really hope 10.5.3 fixes this problem. I hope I have explained my situation properly . Any advice would be nice. I really don't want to have to do a erase and install!!
Thanks

CC 2014.1 AJA LHI worst performance/ sluggish

Similar Messages

Maybe you are looking for