CC 2014 multicamera audio problems

Hi everyone!
I read about some problems with multicamera but in this new version (CC 2014) is the first time I worked in multicamera and I'm having some trange problems with audio, and I dont know if it is a bug or something.
I´m in a full HD 29,97 project with 3 cameras and because some audio effects and have in the source 2 audio tracks. In this áudio tracks I have some fade in/outs and
most of the time just to normalize gain. I mean that somethimes theres is a "contínuos cut" in same track or not.
When in multicamera mode, select main áudio (1 track result from the source 2 tracks) and after finish I insert some vídeo in some places and did some cuts.
The problem is that when playing the final multicamera the áudio (that I didnt cut or edit) is no the same, in some situations, that is in the souce timeline.
Per example, in source there is a situation with the end a playback music (áudio track 2) and when another clip came with somebody talking (áudio track 1).
To reduce the cut evidence I "cross" the sounds with fade out (track 2) and a fade in (track 1) and at the source timeline everything fine. But in multicamera timeline
that point of the áudio result in more "áudio" that dont belong to that point. In this example is a fade out/ fade in 30 frames crossed in diferente timelines and other sounds appear. Very strange!!!
I did some test and if I just eliminate de fades the sound in multicamera is ok but notice that was a cut sound. So, I think that the fade in and fade outs in multicamera
are the main responsables for this problem that apparently is some bug, dont you think?
Now I have this problem to export with almost to hours and there are many situations like that one I refer like an example.
Someone had this problem and know what is wrong?

lgc, Moneel,
You may try to uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Otherwise, this may be one for this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
or for Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

Similar Messages

  • Multicam audio problem

    Hello!
    I have two cameras thus two angles. The main camera, Camera A, has the good audio recording. Cameras are set to switch angles but audio remains from Camera A. During playback, some cuts (Camera A or B) have what sounds like doubled up audio playing. In other words, some audio is clean and the other audio sounds like an overdub that is just barely out of sync. I can't figure out what is going on, why it happened or how to fix it. Any thoughts?
    -A

    Hi RyanManUtd, thanks for the reply. It is not audio from Camera B. B was only used to sync the clips. The audio that is heard is definitely from Cam A but sounds out of sync by a split second.
    It seems to happen on clips that I have added a hold to the beginning or end, a freeze frame in other words.

  • Premiere Pro 7.1 serious Multicam Editing problems

    Hello, I am posting here because the bug report I filed one week ago to Adobe didn't give a result -no response at all from the bug department.
    I have two serious Multicam Editing Problems.
    PC Configuration: Core i7950, Asus P6TD Deluxe, 12GB DDR3 1600MHZ, Quadro K4000, SSD for the system, Seagate Constellation 7200rpm for video editing.
    1. When multicam mode is on at the program monitor, I press play and the program doesn't respond at all. The timeline plays till the end and the program just doesn't let you do anything but wait until playback of the whole timeline is over. Then the program works again (no "not responding" message in Windows).
    2. Sometimes the waveform doesn't even appear at the multicam audio clip. I read in other forums that this problem is found specifically at Premiere Pro version 7.1 (October release).
    I would be grateful with your help.
    Thank you,
    Stavros Symeonidis

    The media is always a combination of HD .MOV (dSLR footage and .MTS (from my Sony Vg-30). However, I also tested it with .mpeg files created by "match sequence settings". GPU acceleration is always on, as I use nVidia Quadro K4000 with the latest drivers (331.82).
    I always create the multicam sequences manually and the problem occurs with any amount of camera angles.
    The problem was not solved by reinstaling Windows (7 and 8). In general, I have no other issue with my PC system, except from this specific one.
    It doesn't appear always, however it will definitely happen if you press twice or three times the letter L, to fast forward the preview of your Multicam Sequence.
    I remind you that this only happens when multicam monitor is toggled at the program monitor.
    Did all these help at all to even reproduce this situation?
    Thank you,
    Stavros Symeonidis

  • Multicam audio dropped

    I have a three minute video with two cameras. Audio plays all the way through in FCX but after sending through Compressor the audio is dropped for the first 54 seconds, and after that plays fine. I can't see any difference in the clips. I have some background music that is playing through the whole three minutes. Audio is from cameras. I exported to ProRes 422 but then also tried a couple of others with the same result. Any ideas?

    I've seen two similar problems (one of which is mine) in the Compressor discussion threads involving lost audio when sending multicam projects to Compressor:
    https://discussions.apple.com/message/18301145#18301145
    https://discussions.apple.com/message/18299872#18299872
    One problem was resolved by exporting a DV file from FCP X, then importing that file into Compressor, rather than sending directly to Compressor from FCP X.
    For me, the audio problem didn't manifest until I added chapter marks in Compressor and burned a DVD. I'm now missing audio at the beginning and end of my DVD, though I do have about 13 minutes of audio in the middle. I don't have a fix yet, but I'm trying again with a reduced average VBR for the MPEG-2 settings in Compressor to see if that helps.

  • Audio Problem since upgrading to Mountain Lion

    Has anyone encountered audio problems with their iMac?  I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour!  It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
      Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix.  I initially noticed this using a USB DAC Headphone Amp.
    I never had any Audio problems before, my machine is over 1 year old.
    I enjoy watching movies in iTunes and DVDs, but this is making it difficult!  A full restart usually fixes the problem for a time but it will eventually come back
    I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

    i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion.  here is what i had to do to fix it:
    -- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
    Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device.  They were assigned to some other random sound driver.  To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers.  All fixed now!
    very weird problem, though.

  • Can Apple fix the 12 bit audio problem once and for all?

    I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

    I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
    Mike

  • Can't move one anchorpoint to another anchorpoint accurately anymore in Illustrator CC 2014. No problems in former versions. Any idea?

    When I want to put an anchorpoint of one object on top of an anchorpoint of another object it jumps off the position I would like to put it. Other versions never had this issue! I need to work very accurately for my designs! Illustrator CC 2014 has this problem.
    Snap to grid, smart guides, etc putting on or off, doesn't help...........
    I pay monthly quite an amount of money for Illustrator. I don't want to waiste any working time on solving problems occuring after updating. I have no need of new features "to fluff up Illustrator" , I need an efficient programm to work with!
    Sorry for being so annoyed, but las Friday I chatted with Illustrator helpdesk, which also cost me a few hours of my working time! I need to work...not to keep spending time on tutorials, solving new problems and finding things out! That is not what I pay for...sorry Adobe!

    jolieu,
    In cases like this, the first guess is Align to Pixel Grid.
    You may select everything and then untick Align to Pixel Grid in the Transform pallete, and also untick Align New Objects to Pixel Grid in the flyout options.
    You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

  • HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

    This solution is for WINDOWS ONLY!!! Unfortunately I believe
    it is a bug in flash itself as I have read more than one instance
    of this same no audio problem occuring on MAC'S and LINUX based
    systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
    PROBLEMS, PLEASE POST THEM IN THIS THREAD.
    Description of the problem: Video sites such as YouTube,
    VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
    not stream embedded audio. Viewing a YouTube video, for example, on
    VideoSift.com results in the video playing back with no audio.
    However, by going directly to YouTube and playing back the same
    video, it appears to work.
    THERE ARE SEVERAL POSSIBLE SOLUTIONS.
    Problem: You may be missing your WAVEMAPPER driver.
    Cause: Wavemapper driver was removed during installation or
    updating of the Flash Player. It might not necessarily be Flash
    that removes it but apparently something does.
    Solution #1: Google "Flash No Audio WAVEMAPPER" for
    directions, its been covered a bunch, but basically requires
    running REGEDIT and readding the WAVEMAPPER key to the appropriate
    location and value in the registry. Its not as difficult as it
    sounds.
    http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
    if your wavemapper key is installed correctly...
    Possible Cause: Corrupted or damaged flash content preventing
    audio streaming from working correctly.
    Soltuion #2: Run CC Cleaner and delete only cached Flash
    content. It is a free program, again just google "download CC
    Cleaner". This particular solution worked for me.
    If CC Cleaner also does not work, the description of your
    problem may differ slightly. In my case on several computers, one
    day it worked, the next day it didnt. If it never worked, this
    would be a logical solution for you. One variation of this that I
    have found is to create a new Windows User Account and log into it.
    The reason the CC Cleaner method may work better is that the User
    Accounts have their own separate cache folders so a corrupted cache
    preventing audio playback on one profile will not be available on
    the other User Account to cause the same problem. I wont explain
    how to do this as the CC Cleaner will work better but if you are
    curious, yet again google "create new windows user accounts". I
    have also seen this method work on one of my affected computers but
    it did not fix the issue on the account I was having problems with.
    http://www.ccleaner.com Install
    and run it, use it only to remove Flash under the Applications Tab,
    Multimedia, Adobe Flash Player. Check it and uncheck everything
    else, then hit Analyze then Run Cleaner.
    Possible Cause: Missing Codec
    Solution #2: Download and install the K-Lite Codec pack.
    Again, google it. A CODEC stands for COmpressor DECompressor and is
    a way to make audio and video files small enough to be transferred
    on the internet. There are a lot of different codecs and if you
    want to play back a video that was compressed using a particular
    codec, you will need that same corresponding codec to decompress
    your media source and view its content. Basically if you dont have
    a codec, you cant observe the content of the media. If you have a
    VCR and want to play back a DVD, you are out of luck unless you get
    a DVD Player. DivX and XVid Codecs are some of the very popular
    codecs used on the net, but to get those, I still suggest getting
    the K-Lite Codec Pack.
    http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
    Solution #4: Go back to Flash 7. If it aint broke dont fix
    it. This Final alternative is only to be used as a last resort.
    You'll have to get rid of Flash 9 and go back to Flash 7. The
    really tricky part here is that you have to prevent Flash from auto
    updating itself. If you install Flash 7, and hit up YouTube, you'll
    immediately get Flash 9+ installed again with the same problems. So
    AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
    yet again go google it) make a new text file and name it MMS.CFG,
    in the file put this one line "AutoUpdateDisable=1" (without the
    quotes) and put it in BOTH your c:\windows\system32 AND
    c:\windows\system32\Macromed\Flash folders. This will prevent flash
    from Auto Updating to 9+, then have to find some place to download
    the old flash 7 installer. I found one here.
    http://www.intercomm.com/downloads/Flash7.
    Only problem is that most sites will try to make you install Flash
    9 and Flash 7 does not work on all sites, but it does on some like
    YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
    You will probably want to IMMEDIATELY go to
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
    after installing Flash 7 and UNCHECK the update feature
    I've tried to write this quick little guide at 3AM so Im not
    going to take more time to research other ways to fix this problem.
    If you have other solutions, such as for MAC and LINUX, or feel
    like adding on to something else that I've written here (links
    would be useful to the downloads I suggested) or correcting any
    mistakes I probably have made, please say so.
    One of these solutions is bound to help you. Theres multiple
    causes for this no audio problem so there is obviously multiple
    fixes.

    http://www.omahapokernews.org
    http://www.holdempokernews.org
    http://www.7cardstudplay.net
    http://www.5cardstudplay.net
    http://www.holdemspot.org
    http://www.texasholdemstate.net
    http://www.texasholdemstate.com
    http://www.pokerbonuslist.net
    http://www.pokerdownloadz.org
    http://www.signuppoker.net
    http://www.tournamentpokerz.com
    http://www.pokercalculatorz.com
    http://www.omahaodds.org
    http://www.omahaouts.org
    http://www.texasholdemrulesonline.net
    http://www.onlineholdemtips.com
    http://www.pokerhilo.net
    http://www.poker-hilo.com
    http://www.hilopokers.com
    http://www.nolimit-holdempoker.net
    http://www.texasholdemlimits.org
    http://www.texasholdemlimits.net
    http://www.onlinepokerlimits.org
    http://www.onlinepokerlimits.net
    http://www.onlinepokerlimits.com
    http://www.texasholdemlimits.com
    http://www.7cardplayer.net
    http://www.5cardplayer.net
    http://www.omahaacademy.org
    http://www.omahapokerrooms.net
    http://www.onlinepokerroomstop.net
    http://www.playpoker-toppokerrooms.com
    http://www.texasholdemz.com
    http://www.playpokeronline-casinos.com
    http://www.texasholdem-vip.com
    http://www.gamble-poker-holdem.com
    http://www.playpoker-holdem.com
    http://www.onlinetexasholdem-poker.com
    http://www.texasholdempokeracademy.com
    http://www.vip-texasholdem.com
    http://www.playfree-poker-online.com
    http://www.texasholdem-pokerrooms.org
    http://www.toppokerrooms.ws
    http://www.toppokercasino.ws
    http://www.onlinepokercasino.ws
    http://www.playpoker-online.ws
    http://www.online-texasholdem.ws
    http://www.play-texas-holdem.ws
    http://www.internet-texas-holdem-poker.ws
    http://www.poker-player.ws
    http://www.luckyschool.com

  • VGA problem with FiFA 2003 and Audio Problem with NHL2003

    i use onboard VGA
    800 x600for both games
    with no problem
    but for Fifa 2003
    the screen looks so dark...
    all players look like a black people(all  black color hair
    and black face))
    some audio problem with NHL 2003...

    Have you tried the following?
    Adjust monitor settings? i.e. contrast/brightness
    Video settings within the game? Some have gamma or brightness settings.
    Gamma correction in "Display Properties"?
    for starters anyway......

  • Audio Problems in Adobe Presenter: Help Needed Urgently!!

    I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
    I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
    In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
    Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
    Can anyone help me on this?
    1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
    2. Is it the problem of Trial Account or something like that?
    Please let me know the solution. Need to work on this ASAP!!!
    Thanks in Advance,
    Yogini

    This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
    As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
    Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
    I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

  • Audio Problems when burning

    I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
    The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
    I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
    Any ideas, I am fresh out, never had this problem with previous version.
    Frustrated

    Andy,
    This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
    From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
    Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
    If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
    F Shippey

  • IMovie audio problems when burning in Toast 6

    Hi,
    i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
    I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
    Any suggestions why this happens / how i can fix it?
    Cheers,
    Andy

    Andy,
    This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
    From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
    Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
    If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
    F Shippey

  • Any Bluetooth audio problems since upgrading to ICS?

    Hi.
    Was wondering if anyone has had any Bluetooth audio problems since upgrading to ICS?  In particular, have you had any stuttering and/or pauses in streaming since the upgrade?
    I use a MW600 with my phone and I get stuttering and pauses every few minutes between the phone and the MW600 which is very annoying - to the point where I can't reliably use the phone for audio any more.
    Thanks
    Savcom

    Sorry but it seems to be a problem some users are experiencing. It's already been reported so hopefully there will be a fix for this soon.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HP Dm4-1160 audio problem

    I have an audio problem. When I plug in my headphones, sound continues to come out through the speakers. The headphones work though (I could plug it in elsewhere and still hear sounds) and there's no problems with the headphone jack (I did a test through my audio control panels and I could hear the tones). So right now, the only thing I can hear through my headphones is test tones. Can anyone help me fix this problem?

    Click on the Start button and, in the search box, type 'Change sound card settings' or 'Manage audio devices' without the quotes.  Right Click on Speakers and Click  on Set as Default Device option.
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • IDVD 4 Audio problems

    My audio works just fine in both iMovie, and iDVD. When I play the DVD I burned the audio works just fine for the menus, and slideshows. After playing a movie for about 00:01:30 the audio cuts off for the rest of the movie. Any ideas?
    2.5 Ghz PowerPc G5   Mac OS X (10.4.8)   Using iLife 04

    There can be some goofy audio problems. One recommendation is to Extract the Audio from your problem clip while in iMovie and see if this makes a difference in the DVD. [this creates a separate sound file, which sometimes fixes audio problems]
    The point where the audio stops -- is it the beginning of a clip? near a transition? or?
    John

Maybe you are looking for

  • VB ActiveX User Control fails to install on Windows 8 using IE10 with Code Download Error: (hr = 80070005) Access is denied.

    I have a VB VS2008 (.Net 2.0) ‘pure’ .NET based user control which used to be hosted in Internet Explorer. Because that approach is no longer possible in VS2013 (.Net 4.5) I have converted it to an VB ActiveX user control. This process involves digit

  • Canon 6D Raw to CS2 Camera Raw

    Is there an update for Photoshop CS2 that will allow me to download Raw files from my Canon 6D directly into PS Camera Raw? Thanks!

  • Mcrypt librarie

    Hello, Description; SunOS server4 5.10 Generic sun4u sparc SUNW I've pb with mcrypt librarie: 1. I've recently installed Apache, Mysql, Php successfully. 2. even for PhpMyAdmin but it requieres mcrypt librarie, 4. mcrypt has been downloaded & unzippe

  • MM vs WMS

    Hi Experts, I would like to ask you is it possible to organize the warehose activity using barcode solution without WMS? Regards

  • Work scheduling view query

    even though i have made settings in customisation i am unable to get work scheduling view while creating material master can you explain me why?