CC 2014 OpenGL issue with GeForce Gt 740M

Hi community,
I have some issues with using Photoshop CC 2014. From the moment I start the program my notebook fan will start working at 100%, but CPU usage is just around 5%. I discovered that it is probably an GPU issue. When I put the option 'Use Graphiprocessor' off, the fan in working normal. Even if I just deactivate OpenGL, the fan is working normally. I already updated my drivers. My notebook is running two graphic cards, the GeForce GT 740M and the Intel HD 4000. I was testing both cards with Photoshop and it's the same for both of them. As soon as I put OpenGL the fan is going crazy. I don't know if its really a graphic card / driver issue, since it happens with both of them.
I hope you can help, because I really would like to use Photoshop, but with all time 100 % fan speed it is impossible.
Thanks in advance and best regards,
Moritz

I have the Nvidia driver from the Nvidia site and the Intel one from my notebook producer (ASUS). I tried to install the Intel driver from their page, but an error occured (not authorized for my system or something like that). The Nvidia driver offered by ASUS is older than the one I installed from the Nvidia site.

Similar Messages

Adobe CS4 OpenGL issues with 10.6.2 and Intel GMA950 video card

I just upgraded to Adobe CS4 and in PS I cannot enable OpenGL. I'm running 10.6.2 on a Macbook with the Intel GMA950 video card.
I was wondering if 10.6.2 does not have the relevant drivers for CS4 to recognize this chipset or that since the video card is integrated (as opposed to a stand alone with the newer Macbooks) that Intel has not update the drivers? It ***** since I cannot use some functions inside PS without OpenGL.

Hello blue20 & welcome to discussions
1.) You can search these forums for the topic of:
Adobe CS4 GMA950
As an example, if you haven't already, in an effort to parse what's already been discussed.
2.) Have you looked at any of the Adobe forums:
http://forums.adobe.com/message/2356530
3.) How many fonts are you working with?
The general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure any 3rd party apps AND plug-ins are Snow Leopard compatible.
An additional measure is to clear the existing font caches:
http://www.macworld.com/article/139383/2009/03/fontcacheclear.html
That said, 10.6.2 release notes have this to say about fonts:
http://support.apple.com/kb/HT3874
Fonts fixes provided for:
• an issue with font spacing
• an issue in which some Fonts are missing
• font duplication issues
• an issue with some PostScript Type 1 fonts not working properly
Good luck in any case.

Z77A-GD65 issues with Geforce GTX 780 Video Card

Hey Guys,
I have a issue with a new PC build.
I think it may be a driver or BIOS setting issue, I hope
I bought a MSI Z77A-GD65 motherboard and below are the specs:
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8
- Balistix Sport 8GB sticks (Total of 24 GB memory installed)
- Kentek 875w power supply
- Geforce GTX 780 Graphics Card
My problem is with the Geforce GTX 780 video card, I installed a fresh install of Windows 7 64 bit and
everything runs and works fine,but when i install the Geforce GTX 780 video card and install the
drivers its all good up to this point but when i restart the computer i get this message in the device
manager ""Windows has stopped this device because it has reported problems (code 43)"
I have installed different versions of the driver, a few older and few newer versions with the same
outcome.
I tried to flash the BIOS to the latest version 10.11 but had problems with it picking up my harddrive
after it flashed successfully. I even checked the boot up setting and it all looked good just would not
boot up, so i had to revert back to the v10.8 BIOS version for it to work.
I'm not sure if there is a setting in the BIOS that i need to turn on or off. I'm not familar with this BIOS,
is there a place in it so i can see if the BIOS is picking up the video card, it has to or Windows would
not see it right?
I'm stumped here, do you guys know of a Geforce driver version that works well with this video card?
I truely think the card is fine because when i install the card to the motherboard i dont get any weird
issues until the driver is installed and Windows is restarted.
I would greatly appreciate any help and advise that you guys can give me.
Thanks alot

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

MOVED: Z77A-GD65 issues with Geforce GTX 780 Video Card

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=177652.0

UPDATE
Well i wanted to post an update on my new build issue.
Here are my specs:
I bought a MSI Z77A-GD65 motherboard with BIOS v10.8
- Intel Core i7-2600 CPU 3.4 Ghz
- BIOS Version E4451IMS V10.8 (i had a issue with the newest BIOS flash v10.11 it wouldn't detect the harddrive, could figure that one out so i went back to v10.8)
- Balistix Sport 8GB sticks (Total of 32 GB memory installed) I first had 3 sticks so i got another 8GB stick to fill all 4 banks for total of 32 GB
- Corsair Professional Series 860 Watt Digital ATX/EPS Modular 80 PLUS Platinum Power Supply AX860i (Bought this PS to replace the Kentek PS)
- N780 TF 3GD5/OC (GeForce GTX 780 GAMING) (traded Geforce GTX 780 card for the MSI version of the GTX 780 card)
OK... I got the new Corsair 860w power supply installed and i installed the new MSI GTX 780 video card with the specs above everything installed fine no problems and my son was playing the Bio Shock Infinite game on Steam and about 1 hour into the game he got a blue screen of death, says something like "to prevent damage windows is now resetting" and it turns off so fast can't read the rest of the message.
I'm going to here in a little bit and update all device drivers with MSI Live update utility and also update the motherboard BIOS again to v10.11.
I'm really confused here, I'm also going to take out some memory and try to run it with sticks only in slot 2 & 4 to see if it runs more stable like that, also should i update the video card to the latest driver, i know the latest is not always the greatest driver.
I want to think you guys again for your help & time with this issue. I really dont know what else to do here, everything is new in this PC.
Thanks

Banding Issues with GeForce 8800

Hi,
I just installed CS4 Production Premium on a new Mac Pro. The system specs are:
2x 3 GHz Quad-Core Intel Xeon
10GB RAM
NVIDIA GeForce 8800 GT 512MB
2x 1TB SAS drives
Samsung 30" Syncmaster 305T Plus
OSX 10.5.6 (both OSX and CS4 are up to date)
When I was working in After Effects, I noticed some dramatic banding issues when lighting a scene. I was curious, so I created a gradient and the same banding was visible. I tried creating a gradient in PS, AI and Flash: same results. Consistent across all CS4 products, and the image depth (8bit, 16bit or 32bit) doesn't affect it at all. Applying a blur effect to any image also produces banding.
I tried finding some gradients through Google image search. They look fine in Firefox, but when I open them in Photoshop the banding once again pops up. Same in Preview to some extent, but not as drastic.
Two other guys in my office are running CS4 with the same monitor. We're running identically calibrated color profiles, and working in the same color space. They have no problems. The only difference between their setup and mine is that they're using Macbook Pros.
Things I have tried: turning OpenGL on/off and toggling the individual GPU settings, working in all available color spaces, working with variable DPI, using another monitor, changing the synchronized color space through Bridge, changing the conversion options (dither, engine, etc), changing the color management policies, working in CMYK/RGB/Gray/Lab, changing the pixel aspect ratio, altering the scratch disks and memory allocation, dumping my CS4 preferences and starting over... none of this affects the banding. A 16bit 72DPI image that's a straight black to white gradient consists of nothing more than 12 or so very visible steps. I'm starting to wonder if this is a graphics card issue.
All the work I'm doing is for screen, so printers don't factor into the equation. I'd appreciate any tips or suggestions anyone can offer.

Well, one thing I notice is that attempting to open the linked .png in Photoshop, it has an embedded "SyncMaster" profile.
Opening it in Photoshop CS4, maintaining that profile, I see banding (although very subtle in the second (bottom) example). The top example exhibits a stippled effect at the band edges at 100% scale.
Opening it and converting it to Adobe RGB 1998, I see almost no sign of banding in that bottom example.
Opening it as is in Preview, I see the banding again.
Creating a new radial gradient in Photoshop CS4, 1300 pixels wide, #666666 to #000000, at 100% scale, it is a smooth transition with the barest hint of banding. Also, my #666666 is noticeably lighter than in your example.
Offhand, I'm not sure which factors affect your workflow. But I doubt it is your video card unless it is set for, say 16 bit or 8 bit...
Neil

MacBook Pro mid-2014 Intermittent issue with sound

This occurs in an intermittent fashion : I cannot adjust volume neither with the slider at the top of the screen, nor with the volume buttons of my keyboard. In fact, there is no way I can adjust the sound. I get this image (bottom) when I try to adjust the sound using the keyboard and the slider in the top menu is maxed and greyed out.
Context:
I bought this MacBook Pro last week, as a replacement for my mid-2009 MacBook Pro. I restored a Time Machine backup.
The new computer came with Yosemite and the old one had Mavericks installed last time I made a backup, therefore the new computer was downgraded to Mavericks when I did the restore. After the Time Machine restoration was completed on the new computer, I (re)installed Yosemite.
I just brought the computer to the Apple Store; the diagnosis tools were run and no hardware problems were found. As I said this is an intermittent problem, so sometimes I restart the machine and it works normally, other times the problem occurs. (1 out of 3 reboots, i'd say...)
What do you think ? Hardware problem ? Software issue due to Mavericks being restored on top of Yosemite ?
Any others have got the same issue ?
Thanks folks,
Emile

     Reset PRAM. http://support.apple.com/kb/PH18761?viewlocale=en_US&locale=en_US
     Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

Internal error (-2014) Goods Issue with Batch Items added through UI

Hello Experts,
I've added a button to my Production Order screen labeled 'Issue Components' that is meant to streamline the process, and it works, except when the ProdOrder has Batch controlled items on it. When that happens it returns Internal error (-2014) 
I've tried stepping through the code and it doesn't error until the final Add
Here is my function, Thanks for the Help! 
I'm using CitiXSys Inventory Pro and am pulling the items from the Picked table, that's what that sQuery does. It returns correctly. I've also set everything to 'Manual' instead of 'Backflush' 
<pre>
Private Sub IssueComponents(ByVal iDocNum As Integer)
 Try
 'Declaring the needed variables'
 Dim oRec As SAPbobsCOM.Recordset
 Dim oGoodsIssue As SAPbobsCOM.Documents
 Dim bIssueLineAdded As Boolean = False, sQuery As String = "", x As Integer = 0, iCode As Long = 0, sErrorMessage As String = ""
 Dim tmpLot As String = ""
 'Instanciating the Goods Issue'
 oGoodsIssue = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenExit)
 'Initialzing the SBO object'
 oRec = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
 'Assing the header of the Goods Issue'
 oGoodsIssue.DocDate = Date.Now
 oGoodsIssue.DocDueDate = Date.Now
 'Getting the entire "Manual" components for this production order to issue them'
 sQuery &= "Select PK1.U_DocNo, KI.U_ItemCode, KI.U_BseLnNo, OW.DocEntry, KI.U_Quantity, KI.U_WhsCode, KI2.U_BatSrlNo, KI2.U_LotNo from [OWOR] OW (NOLOCK) INNER JOIN [@ctx_pkin] PK ON OW.DocNum = PK.U_BaseDoc," & vbNewLine
 sQuery &= "[@ctx_PKIN] PK1 (NOLOCK) INNER JOIN [@CTX_KIN1] KI (NOLOCK) ON PK1.U_DocNo = KI.U_DocNo," & vbNewLine
 sQuery &= "[@ctx_KIN1] KI1 (NOLOCK) INNER JOIN [@CTX_KIN2] KI2 (NOLOCK) ON KI1.U_DocNo = KI2.U_DocNo and KI1.U_BseLnNo = KI2.U_BseLnNo" & vbNewLine
 sQuery &= "where OW.DocNum = '" & iDocNum & "' and PK.U_BaseType = 202 and PK1.U_DocNo = PK.U_DocNo and KI1.U_DocNo = PK.U_DocNo and KI1.U_BseLnNo = KI.U_BseLnNo" & vbNewLine
 'Executing the query'
 oRec.DoQuery(sQuery)
 'Looping through the "Manual" components'
 For x = 0 To oRec.RecordCount - 1
 'Prompting the user'
 oAppl.StatusBar.SetText("Issuing Components...(" & x + 1 & " of " & oRec.RecordCount & ")", SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
 'Adding the previous line if applicable'
 If bIssueLineAdded Then
 oGoodsIssue.Lines.Add()
 End If
 'Filling the line information'
 oGoodsIssue.Lines.WarehouseCode = oRec.Fields.Item("U_WhsCode").Value 'dIssueComponents(x).Item("WhsCode")
 'oGoodsIssue.Lines.TransactionType = SAPbobsCOM.BoTransactionTypeEnum.botrntComplete
 oGoodsIssue.Lines.BaseEntry = oRec.Fields.Item("DocEntry").Value 'oProductionOrder.AbsoluteEntry
 oGoodsIssue.Lines.BaseType = 202 'Production Order Type'
 oGoodsIssue.Lines.BaseLine = oRec.Fields.Item("U_BseLnNo").Value 'GetBaseLine(oProductionOrder.AbsoluteEntry, dIssueComponents(x).Item("Component"))
 'oGoodsIssue.Lines.ItemCode = oRec.Fields.Item("U_ItemCode").Value
 oGoodsIssue.Lines.Quantity = oRec.Fields.Item("U_Quantity").Value 'Math.Round(oRec.Fields.Item("U_Quantity").Value, 2) 'dIssueComponents(x).Item("PlanQty")
 'Checking if the item is neither lot or serial controlled item'
 If oRec.Fields.Item("U_BatSrlNo").Value = "" And oRec.Fields.Item("U_LotNo").Value = "" Then
 'Nothing controlled item'
 ElseIf oRec.Fields.Item("U_BatSrlNo").Value <> "" Then
 'Lot controlled item'
 tmpLot = oRec.Fields.Item("U_BatSrlNo").Value
 'oAppl.MessageBox("Lot: " & tmpLot & ", whs: " & oRec.Fields.Item("U_WhsCode").Value & ", qty: " & oRec.Fields.Item("U_Quantity").Value)
 oGoodsIssue.Lines.BatchNumbers.Add()
 oGoodsIssue.Lines.BatchNumbers.BatchNumber = oRec.Fields.Item("U_BatSrlNo").Value
 oGoodsIssue.Lines.BatchNumbers.Quantity = oRec.Fields.Item("U_Quantity").Value 'Math.Round(oRec.Fields.Item("U_Quantity").Value, 2)
 'Else
 'Serial controlled item'
 'oGoodsIssue.Lines.SerialNumbers.SystemSerialNumber = oRec.Fields.Item("").Value
 End If
 'Setting the line to be added'
 bIssueLineAdded = True
 'Movoing to the next record'
 oRec.MoveNext()
 Next x
 'Checking if there was any component or not'
 If bIssueLineAdded Then
 'Adding the Goods Issue'
 iCode = oGoodsIssue.Add
 If iCode <> 0 Then
 oCompany.GetLastError(iCode, sErrorMessage)
 oAppl.MessageBox("Goods Issue Production Order: " & iDocNum & " didn't get created for the following reason: " & serrormessage)
 Else
 oAppl.StatusBar.SetText("Components were issued successfully.", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
 'TODO: add to ProdOrder remarks field
 End If
 End If
 Catch ex As Exception
 oAppl.MessageBox("IssueComponents() " & ex.Message)
 oAppl.StatusBar.SetText("Error in IssueComponenets() : " & ex.Message, SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
 End Try
 End Sub
</pre>
Edited by: Rob Daniels on May 30, 2011 10:33 PM

Please use the latest upgrade of Inventory Pro from CitiXsys.
If you are using SAP Business One 2007; use Inventory Pro 5.6 series
For SAP Business One 8.8 and up; use Inventory Pro 6.6.1 and up

Edge Animate CC 2014.1 issues with the new Actions Panel

Hi Guys - I am totally confused with the latest undated EA CC 2014.1 actions panel.
With the old one - its was simple :
but the new one - I get nowhere, freezes the program and I cannot edit any actions... Very frustrating - am I doing something wrong or is it a program flaw?
Is there tutorials I can access on the new actions panel?

Strange. I do not think we have seen this. When you choose an action for example, you need to drill down to the element that needs the action and then double-click to apply it. Is it what you are doing?

OpenGL issue with Mac Classic games?

I'm trying to use some great old OS 9 games (Vampire: Masquerade and ST: Elite Force, etc) but whenever they switch over to the 3D rendered segments the screen goes completely black with only sound playing.
I suspect OpenGL is somehow involved as that is the required program for these games, right? And it's included on all OS systems, but for some reason mine is not giving me love.
I've got an iMac with OS 10.3.9.
Any insight?

Hi
Maybe get in touch with the people who make the game?
Don't know if there is a forum that deals with OpenGL. How about the Mac OS 9 forum, may help?
http://discussions.apple.com/forum.jspa?forumID=669
Steve

Serious resolution issues with After Effects CC (2014) on Windows 8.1 Pro on Dell Precision M3800 laptop??

My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
Any help will be appreciated!
k.regards
Ramon

Hi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
Is there at least a work around, until this big fix comes along?
k.regards
Ramon

EXCEPTION_ACCESS_VIOLATION issue with regard to OpenGL

EXCEPTION_ACCESS_VIOLATION issue with OpenGL occurring with the Java SE Runtime Environment 6u17 on Windows 7, 32 & 64 bit platforms.   Version 6u24 and later does not produce the crash. However, we cannot use any other version of JRE other than 6u17 due to customer constraints. The two primary scenarios where crash (jvm exits) occurs are: 1) toggling between two applications then selecting an image item on screen ( OpenGL rendering takes place)... (Log file: hs_err_pid6568_C2_TC_error.log). Scenario 2: When panning an image (OpenGL rendering takes place) and then clicking a button to load additional image data (OpenGL rendering takes place), crash occurs (Log file: hs_err_pid6036_ENR_TERRAIN_crash.log)
Is there any Oracle documentation noting any JRE fixes between 6u17 and 6u24 that might at least mitigate the issue(s) described above? Or information with regard to issues between JRE's and OpenGL ? Also, if anyone can advise on code mods, etc that we can try toward said mitigation efforts of course would be helpful.
The following snippet hopefully should suffice as general example for both noted issues:
Log snippet ( hs_err_pid6568_C2_TC_error.log):
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6ec158d6, pid=6568, tid=7176
# JRE version: 6.0_17-b04
# Java VM: Java HotSpot(TM) Client VM (14.3-b01 mixed mode windows-x86 )
# Problematic frame:
# C [GLU32.dll+0x58d6]
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x4d996000): JavaThread "pool-6-thread-1" [_thread_in_native, id=7176, stack(0x502b0000,0x50300000)]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000028
Registers:
EAX=0x00179ca0, EBX=0x00179ce8, ECX=0x00179ca0, EDX=0x5691e9a0
ESP=0x502ff4ac, EBP=0x502ff4cc, ESI=0x00000000, EDI=0x00179ca0
EIP=0x6ec158d6, EFLAGS=0x00010246
Top of Stack: (sp=0x502ff4ac)
0x502ff4ac:   6ec13548 001833f8 0018e060 0018e018
0x502ff4bc:   00179ca0 00000000 00000018 502ff4f0
0x502ff4cc:   502ff4f0 6ec165a8 001a5038 0018e048
0x502ff4dc:   0018e018 001cd728 6ec147d7 001cd728
0x502ff4ec:   001a5038 502ff514 6ec14925 2e5096af
0x502ff4fc:   5f338d35 5038bf30 001a5038 001a5038
0x502ff50c:   02e177c2 0016b930 502ff534 6ec12c65
0x502ff51c:   001a5038 5038bf30 0000001d 001a5038
Instructions: (pc=0x6ec158d6)
0x6ec158c6:   30 dc 61 30 eb e7 dd db dd d9 dd d8 c3 dd 41 28
0x6ec158d6:   dc 66 28 dd 42 28 dc 61 28 d9 c0 d8 c2 d9 ee d8
Stack: [0x502b0000,0x50300000], sp=0x502ff4ac, free space=317k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [GLU32.dll+0x58d6]
C [GLU32.dll+0x65a8]
C [GLU32.dll+0x4925]
C [GLU32.dll+0x2c65]
C [pep_gx.dll+0x3dc8]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative.nativeGetRenderedChart(Lcom/cimmeria/efb/crom/common/utility/ILogUtility;Lcom/cimmeria/efb/crom/common/jni/JNIErrorInfo;Lcom/cimmeria/efb/crom/tc/cmn/jni/IChartImageProxy;IFZI)V+0
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call_aroundBody2(Lcom/cimmeria/efb/crom/tc/cmn/jni/ChartRendererNative$RenderCallable;Lorg/aspectj/lang/JoinPoint;)Ljava/lang/Object;+51
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call_aroundBody3$advice(Lcom/cimmeria/efb/crom/tc/cmn/jni/ChartRendererNative$RenderCallable;Lorg/aspectj/lang/JoinPoint;Lcom/cimmeria/efb/crom/tc/cmn/aop/RuntimeExceptionAndErrorMonitorAspect;Lorg/aspectj/runtime/internal/AroundClosure;Lorg/aspectj/lang/JoinPoint;)Ljava/lang/Object;+14
j com.cimmeria.efb.crom.tc.cmn.jni.ChartRendererNative$RenderCallable.call()Ljava/lang/Object;+34
j java.util.concurrent.FutureTask$Sync.innerRun()V+30
j java.util.concurrent.FutureTask.run()V+4
J java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Ljava/lang/Runnable;)V
j java.util.concurrent.ThreadPoolExecutor$Worker.run()V+28
j java.lang.Thread.run()V+11
v ~StubRoutines::call_stub

There are some other solutions possible.
1. Get another driver. The only one known is java only so it wont crash. But is not not free.
2. Use a proxy driver. That means that another app actually does the database work. If it crashes you just start it again (which you can do in your main code.) That way it won't take down your server. There are commercial jdbc drivers that claim MS Access but are are really just proxy implementations as an option in this area.

Flickering Issue with RGB Curves in Adobe Premiere CC (2014) version

I've been an Adobe Premiere user since Premiere 6.5 and have never encountered any serious issues with the software. However in this most recent Creative Cloud update I am have a flickering issue when using RGB Curves, the color correction effect I use most often. When the effect is applied, there seems to be a shift in the shadows between a "crushed" black and a "flat, or faded" black every other frame. I've been using this latest update for about a week and haven't had any other issues aside from this one.
Unfortunately this is huge issue at the moment due to a deadline I am facing in which RGB Curves has been used as the primary color correction tool on the entire project (multiple episodes). I would simply revert to a previous version of CC but I know that the new updates are never backwards compatible. Since the project has been saved in the CC (2014) update, reverting to previous software versions would be impossible. I am currently exploring exporting the XML from the CC (2014) projects and importing it into a previous version of the software.
Please let me know if anyone out there is experiencing any similar issues or if there are any suggestions on how to solve this issue. Thanks!

I am experiencing flickering issues as well. However my issues are with the Fast Color Corrector and the Three Way Color Corrector. It seems as if the color correction tools are causing intermittent flickering on some people's systems.
Additionally when I converted some old PPCC 7.2.2 projects which had the Three Way Color Corrector applied, some clips in sequences would come up as a green screen in the program monitor. If I turned the TWCC off the footage would display correctly in the program window. If I turn the TWCC back on it would display the green screen again.
I haven't found a solution to the flickering but to solve the green screen issue I have to remove the effect, then re apply it. I guess for whatever reason, the 2014 version of PP has issues with 7.2.2 projects where the TWCC was applied.
I'm hoping Adobe will address this soon with an update for the various bugs that have been reported.
PPCC 2014 8.0.1
Win 7 Pro

Issues with mac pro 2014 and Adobe CC

Having major issues with my New Mac Pro since installing 10.9.3. The issues are with render in Adobe CC products and glitches on displays.
Model Name:          Mac Pro
Model Identifier:          MacPro6,1
Processor Name:          12-Core Intel Xeon E5
Processor Speed:          2.7 GHz
Number of Processors:          1
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache:          30 MB
Memory:          64 GB
Boot ROM Version:          MP61.0116.B05
SMC Version (system):          2.20f18
Illumination Version:          1.4a6

Well known issue and no solution yet. There is nothing wrong with your computer. http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compati bility-with-critical-pro-apps/

Photoshop CS4 Issues with the NVIDIA GeForce 8800?

I have an Mac Pro Intel 2 x 2.8 GHz Quad-Core Xeon with 6GB RAM running OS X 10.5.5 and an NVIDIA GeForce 8800 GT driving two monitors.
I just installed Adobe Photoshop CS4 fresh from a factory CD.
When I perform a Distort -> Lens Correction or do a Free Transform to rotate an image an arbitrary amount, and then follow that with a resize (tried 133% and 166%), the image ends up with a pattern of gray plaid overlaid -- especially visible in the darkest shadows. The pattern appears only on the rotated layers of an image.
This pattern persists if I quit and restart Photoshop, BUT -- there's no pattern visible if I open the same image in Photoshop CS3. It only appears in CS4.
This is easy to reproduce -- I just tried it with an image I created in Photoshop at 5x7" at 240dpi and filled with solid black.
I dropped a Bug Report to Adobe, and they wrote back suggesting "This is most likely an issue with your video card driver."
Anybody else out there having this issue? Anyone with an identical setup want to test this?
-=-Joe

sako75 wrote:
I'm seeing what you are talking about when viewing at 200% and up on my 300dpi images. I'm thinking that its the new pixel grid overlay for dialing in the details on the image.
No, that's not it. I can see it at 100%, and only on images that have been rotated and resized.
In fact, yesterday I rotated one layer under an unrotated layer, and only the rotated layer showed the plaid pattern.
And it's not a simple grid -- it's a real plaid-like gray, almost like stretch marks.
-=-Joe

Experiencing issues with audio scrubbing in Premiere cc 2014

Since upgrading I've been having issues with audio scrubbing in Premiere CC 2014.
Some of the time it won't scrub at all (silence) when I know that scrubbing option is turned on. Other times it will scrub the wrong section of the timeline, I'll hear dialogue from a different point in a clip.
Much of the time I experience this I'm working with multicam clips in sequences.
Working on iMac 2013, 32GB RAM, NVIDIA 780
thank you.

Hi IP,
Intensity pro wrote:
...Adobe are you listening?
Yes, but it's Saturday. And I'm on vacation. You know??
Sorry that we do not have 24-7 support. The best time to catch us is 7AM-7PM PST, Monday to Friday.
Intensity pro wrote:
Currently using / testing a 30 day trial of CC 2014 (CS5 user for years with no issues) and all was fine yesterday when editing. Turned on today and had no way to scrub audio. Also had no Intensity Pro external monitor which worked fine the day before. Restarted PC and still nothing so starting poking around with the playback settings in preferences by choosing Adobe Desktop audio in the audio device section choosing OK then selecting back to Blackmagic audio then hit Ok. All of a sudden there was my external monitor and was able to scrub audio again. It's like it's sleeping knowing it should work until you poke it a few times to wake it up. How my Intensity Pro external monitor and scrubbing audio being related in any way is perplexing. Or am I being obtuse?
I would contact Blackmagic Design to make sure your drivers are current. Can you try that?
Thanks,
Kevin

CC 2014 OpenGL issue with GeForce Gt 740M

Similar Messages

Maybe you are looking for