CC 2014 Palette Form Fields Not Recognized with Dual Monitors

When I'm using a dual monitor setup, my second palette monitor (usually my MBP) can render palette form fields unclickable. For example, if I want to click into the form field to change the stroke size, my pointer clicks straight through to the finder as if the palette wasn't there. However, I'm still able to grab the top of the palette and move it to the main monitor. When I do this, the palette works fine, moving it back recreates the issue. This problem is intermittent, but has happened a handful of times in the last month.
So far I've experienced this with Illustrator CC and CC 2014 as well as Photoshop CC 2014.
My current setup is a 2013 2.6 GHz MBP with 10.9.4 and the most recent versions of CC and CC 2014.
Any ideas?

oh, forgot to say Mavericks 10.9.5 running on the mac pro..

Similar Messages

Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

Sounds like you're a candidate for Lightroom...based on the time you don't
want to spend in Photoshop.
Photoshop install media is likely created in large batches, perhaps in a
foreign country, so it's understandable that you get Photoshop 11.0.0 is on
the media.
I don't know as I would use ProPhotoRGB as my working space in Photoshop. I
was merely suggesting that you look at your color settings to make sure
things were the same on both machines.
How do you know your actions are the same? Did you copy the action
recording from one computer to the other, or did you merely record the same
steps on each one? Have you compared the details of each action step in the
Actions Palette to make sure they are the same? The symptoms still sound
like something different than sRGB being the output color-space, or the fact
it isn't embedded on one or the other of the computers.
How are you viewing the JPG when it looks the same or different than the
RAW? Are you looking at the side-by-side in Photoshop, or side-by-side in
Bridge, or are you using a mixture of viewers, one Adobe, and one not? And
are you using the Canon Codec on Vista or not? The Canon Codec would be
showing the camera-preview in the RAW not the RAW adjustments that Adobe has
done.
While the OS shouldn't be causing a difference in how the action is run, a
difference between OSes may make a difference in the processing to show up.
The camera profile associated with a RAW file is visible in the
third-from-right tab in ACR over at the right. The one with the little
DSLR-camera icon on the tab.
Can you attach the two JPGs on a reply, here, or if not, upload a ZIP of the
two JPGs and the RAW to a file-sharing site like http://www.rapidshare.com/
and post the download link(s)?

Any forms are not opening with error ORA-01403: no data found in R12

HI ,
Suddenly any of the form are not opening with following error.
FRM-40735: WHEN-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-04063.
Can any one help ?

I bounced the database and listner. Have application down.
After
Compile/Reload Applications Database Entities
1. Compile APPS schema
Still I see 5012 apps object invalid.
select
count(*) from dba_objects where status !='VALID' and owner=
'APPS'
COUNT(*)
5012
1 row selected.
is that a normal count I do not have previous baseline to compare with.

Problem viewing forms.This form is not supported with the current version of Adobe Reader.Upgrade to the latest version for full support. That does that mean exactly?

Problem viewing forms.This form is not supported with the current version of Adobe Reader.
Upgrade to the latest version for full support.
What exactly do I need to do?

That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

Putting form field in line with text

trying to put a text form field in line with the paragraph but am unable to do so. Any ideas?

Are you trying to adjust the line spacing of the text in order to align the text with visible lines already present in the format of the form?
There isn't a text formatting tool in the form section. You need to create the from field and edit the properties to allow Multi Line Scrolling and to Allow Rich Text Formatting. Then exit the Form section by clicking the hand tool. Click in the field and press Ctrl+E to pull up the text formatting tool bar. Click more, then paragraph. On line spacing select Exactly and enter the amount of characters that you need in order for the spacing to apply appropriately.
Hope this helps!

"This form is not supported" with updated version on iMac.

I can view PDFs in Safari, but when I click save and open the document on my computer, the document states "Warning: This form is not supported with the current version of Acrobat or Adobe Reader. Upgrade to the latest version for full support." I am upgraded to the latest version! What is going on here?
I also tried to save it to Adobe's cloud, and when I went to view the document in my Adobe account, it says the same thing. Can somebody help me fix this? I'm trying to fill out a very important document.
I am using OS X Version 10.9.3, Safari Version 7.0.4, and Adobe Reader Version XI (11.0.07)

That means you were probably using Adobe Acrobat to view PDF's. Acrobat is totally unnessary, you can view PDF's in Preview (Applications - Preview).
BTW PLEASE complete your profile. It's very difficult to help someone when they don't provide any information about their system. You can easily do this by clicking Your Stuff in the upper right of this page, then click Profile and fill in the pertinent information.

HP Photosmart scanner not recognized with IMAC OSX 10.9.3

after updating to Maverick osx 10.9.3 my hp photosmart scanner is not recognized with IMAC image capture. I have done all software upgrades and deleted the printer and reinstalled the printer which is on my wireless network.

Do these HP docs help?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&cc=us&dlc=en&lc=en
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Have-updated-to-maverick- no-drivers-for-printer-or-scanner/td-p/3061957
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967500&cc=us&dlc=en&lc=en

Audio CD not recognized with Mini but reads with Macbook?

Error message saying Audio CD not recognized with Mini but reads with Macbook pro. Both machines are using the same Samsung external usb dvd/cd player.
I've tried rebooting the mini, cleaning the disk, unplugging the drive and the Mini still won't recognize the CD's (it's a 3 cd set and all 3 disks aren't working on the Mini.
When I use the same disks and drive with my Macbook Pro everything works fine.
Any suggestions?

Hi Jay,
Certainly a strange one!?
Are these commercial or self made Discs?
Have you tried CD/DVD sharing on the MBP & see if the Mini can read them in the MBP?

E440 not working with external monitor via onelink dock

My brand new E440 is not working with my monitor when connected via the dock, however it is working when plugged straight into the laptop. I have tried using another E440 with the dock and monitor, this set up worked flawlessly.
Any ideas on how to fix this probllem?
Thanks

I sent it in for repair. Came back and it was still not working. Im waiting for lenovo to get back to me on it.

Gnome Crashes on Login after messing with dual monitor settings

Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
Here's my xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 285.05.09 ([email protected]) Fri Sep 23 19:18:19 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
I installed awesome around the same time as configuring the dual monitor setup.
Thanks.

Update.
The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
Is there a way to just reset the Gnome settings?

Need to launch Organizer Twice to work with Dual Monitors

If I open a project or either Photoshop Elements 10 or PRE10 and then click on Organizer it loads, but sits in the taskbar below. If I hover over it the AERO Windows (Win 7) pops up showing it's loaded. But It will not maximize. This is when I had last used it on a second monitor so I can easily compare before and afters. However, if I right click on it and close it, then reopen it, it launches perfectly in the 2nd monitor. Does this every time. I ussually leave it open all the time now to avoid this but I don't know how sesitive the catalogs are if the system is rebooted for some reason.
I did no specific configuration for dual monitors, Just dragged it over there when I wanted to use it.
Thanks,
Joe..

Hi Joe,
This is a known issue with dual monitors and got to know that Organizer people are tracking it as a bug for now.
Hope this will be fixed soon.
Thanks
andaleeb

[SOLVED] openbox margins with dual monitors

Hi community,
I have stumbled to a nasty problem on my first incursion to dual monitors in openbox.
I'm using xrandr with this command (which works just fine BTW):
xrandr --output LVDS --mode 1280x800 --primary --output VGA-0 --mode 1280x1024_60.00 --gamma 1.0:1.4:0.85 --right-of LVDS
and have set a Virtual screen in xorg.conf of 2560 x 1024 pixels.
But, my laptop monitor only handles 1280x800, while my external LCD monitor has 1280x1024, so there is a virtual area under my laptop screen which i'm not using, but i dont really care about that.
The problem is that when I'm setting screen margins, so that maximized windows will respect the panels in the bottom (tint2), in rc.xml (or by obconf) the margins are applied to the virtual screen and only are practical on the external monitor wich has more pixel height.
I'm really missing some kind of per monitor margin settings in openbox, maybe there is and i haven't found it? It makes me wonder because openbox can maximize windows to a single monitor, even if the whole layout it's treated like a virtual screen, so it has some way of distinguishing between them.
I would appreciate any suggestions, thanks.
Last edited by andreamer (2010-07-26 18:32:15)

TL;DR - I'm not aware of any acceptable solution at the moment.
Basically, what you're having problems with, is the "dead area." It can really be quite a pain in the butt if window managers or other screen aware applications don't anticipate it properly. To my knowledge, Openbox doesn't support margins on a monitor-by-monitor basis. In reality, you shouldn't need to be setting margins anyway. Tint2 should be reporting itself as a taskbar, and Openbox should be respecting that.
I have dead area too, with multiple monitors, and Openbox respects both of the KDE taskbars I have running (one on each monitor). (I use KDE and simply replaced Kwin with Openbox.) This tells me that tint2 should be able to cooperate with Openbox. I remember trying tint2 a while ago, and didn't fine it adequate in a dual monitor environment (it was probably a year ago or so). tint2 would need to be setting the _NET_WM_STRUT_PARTIAL hint, and I'm not sure if it is (or if it's doing it properly). See http://standards.freedesktop.org/wm-spe … #id2507618
Also, I do know that the developer for Openbox recently got a dual monitor setup, and she's been adding additional support for dual monitors a little at a time. Hopefully with 3.5, there will be a lot more support. (Margin support for multiple monitors would be great, because it could be a good utility knife for applications that don't care about multi-monitors setups and don't set the proper hints.)
If you're capable of modifying tint2, my course of action would be to try something that works (like the KDE taskbars) and record the hints being set there. Then compare them with tint2 and try to mirror KDE's setup. (If you're a programming lacking experience with X and related nonsense, I'd be more than willing to offer what guidance I have.)
Also, I developed a panel myself (and got pretty far along) using the PyGTK toolkit... But I can't remember if I solved this problem or not. I'll try to check it out and get back to you. (I got as far as implementing a widget system that includes a task list, system tray, clock, menus... It just isn't polished very well. My original intention was for it to be a more robust PyPanel with dual monitor support.)
Last edited by BurntSushi (2010-07-24 22:46:23)

Unwanted keyboard shortcut with dual monitors

Problem:
I have a computer setup with dual monitors (desktop extended). When I have a window open, e.g., Microsoft Word 2007, after I type "1" on the keyboard, the Word Window and mouse relocate to the second monitor. When I type "2" the Word window and mouse relocate
to the main monitor. In the word document, 1 and 2 are typed in the document, but pushing the keys still move the window and mouse to the opposing monitor.
I checked the keyboard settings within Windows and found that sticky keys and such are not enabled. The keyboard has no such features to enable. I also checked the display setup in display properties and found nothing that would indicate such a setup. Google
searches return nothing related to my problem.
What I do know:
-The rest of the numbers on the keyboard work fine. Pressing 1 and 2 on the number pad at the far right of the keyboard do not transfer the active window to the second monitor. Those keys work fine.
-The type of window does not matter. Using notepad, word, excel, internet explorer, sticky notes; all of those windows would transfer to the opposing monitor when I push 1 and 2.
Setup:
Windows XP
Dual-Monitor
Wireless Keyboard and mouse

This pertains to StarTech DVI to USB adapters.
There's an icon in your system tray near the clock, either super utility or usb display device. Right click, and select multi display control panel.
10:20:14 AM
There's a button to disable as long as you have the newer driver from their website. The old drivers had a bug that caused this button to not work

Interfacing with dual-monitor machine

Hello all--
I've got a G5 at home with dual monitors on which I run 3D animation software with lots of panels. I'd like to be able to control the G5 from work using a laptop (possibly also connected to an external monitor). Is it possible to display both screens of the desktop using ARDv3 on the laptop? Some users have mentioned they can do this but the size of the remote screens is unsatisfactory. So, again, can you visualize both screens well via the remote computer?
Thanks for any help you can offer.

you can view both screens at once but it will be scaled to fit on the screen you have... so what you see is dependent on the resolution of both client monitors and your admin computer's monitor.
you can also select to view a single monitor of the client computer.
i've never run ARD admin on a computer with 2 monitors so i'm not sure how it handles it but i'm guessing that you can view both monitors on both admin monitors.... it'll probably scale down or up dependent on resolution.

Run screensaver independently with dual monitors

I was wondering whether, when running OS X with dual monitors, it was possible to run the screensaver on one of the monitors (while still using the other)?
Cheers,
Diego

Nope. Can't do it.

CC 2014 Palette Form Fields Not Recognized with Dual Monitors

Similar Messages

Maybe you are looking for