CC 2014 user interface, Windows 7, 64 bit

Hello,
I installed Illustrator CC 2014 version, and noted that the user interface had changed - all tool icons, panels, text sizes are much bigger. Operating system is Windows 7, 64bt. I also installed CC 2014 on my work computer (Windows 7, 32bt) - in that computer the tool icons, panels, text sizes remain same size as in previous versions of Illustrator.
I work with laptop, so I would prefer not to loose so much desktop space to tools and panels. Is there any way to change the interface tool icons size? Or is this a problem that is related only to my laptop and GPU? Or is this normal...?
Thanks in advance for the reply and help.
Anne V.

Hello,
And thank you for the comments. I got help from Adobe technical support, and the problem is solved in the Windows control panel. Now the user interface is "back" in normal size. Working is easier now.

Similar Messages

How to Back Up User Files (Windows 7 64-bit ) in HP laptop?

He everybody!
I have a HP laptop
Product Name: HP Pavilion dv6-6093ex
Product Number : LM610EA#A2N
I have read 'How to Back Up User Files (Windows Vista or XP)'
Back up files with the HP Recovery Manager
The HP Recovery Manager is used to back up user files to an external USB storage device.
1-Boot to the recovery partition 1. by pressing F11 .
2. Click Advanced Options .
3. Click Backup computer files .
4-Select the type of files you need to back up from the list and then click Next . It will take several
minutes to locate all of the files, no matter where they are on the hard drive.
5. Select the destination device (external USB hard drive or a USB flash drive/Memory Stick).
6. Click Next to start the backup.
New files will be backed up. Depending on the number of files located, it could take an hour or more to backup
the file.
However, When I have done those steps I encountered these:
First: I didn't see any option to save the files in an external hard disk or even another partition other than Windows partition.
Second: I haven't find any option to back up my files in other partition other than Windows partition, I have let Recovery manager proceed to save at any place it prefers. After that, I found that Recovery Manager gave me an error during copying the files :
Recovery Manager failed in finishing backup files, error: FFFFFF14, although the percentage of progress was %67
Also, I have enough free space on Windows partition.

Would it be quite good if anyone could take some time out to reply me?

When i start firefox double clicking the short cut icon, it runs in the processes but the user interface window does not comes up in the screen,please help.

in my laptop,i generally use windows xp, due to some problems i repaired the window, after some days without any notice the above problem starts. but internet explorer 8 shows up with a perfect window, but a bit slow in every respect compared to firefox. above all if i start the window in safe mode firefox runs perfectly.please help, i ve tried every possible way(installing different anti-viruses, acessing through set program and defaults).

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]
* http://kb.mozillazine.org/Browser_will_not_start_up

Problems installing SQL Server 2014 Dev on Windows 7 64 bit

I just purchases Microsoft SQL Server 2014 Dev edition from the Microsoft store, downloaded the 64bit version, and tried to install it. The install fails consistently on the Install File Setup (after the product code and accepting the license) with
the following error:
The following error has occurred:
Unable to open Windows Installer file 'D:\SQL2014Dev\Sqldev_eng_mar14\redist\VisualStudioShell\VC10SP1\x86\vc_red.msi'.
Windows Installer error message: 1: 2203 2: D:\SQL2014Dev\Sqldev_eng_mar14\redist\VisualStudioShell\VC10SP1\x86\vc_red.msi 3: -2147286960 .
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
My system is running Windows 7 Home Premium x64, which looks like it's supported for this product.
Does anyone have any suggestions?

Hi
Please make sure firewall is turned off when you are installing SQL Server. Also make sure you are not installing from CD drive, install it from Local Drive.
For such issues MS has released support article to fix any missing installer. You can refer to below support article
https://support.microsoft.com/kb/969052?wa=wsignin1.0
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Additional labview user interface windows?

Hi there,
I am currently writing a control/monitoring program with labview. I am wondering if it is possible to have a button/link in my front panel to open an additional front panel which displays more detailed information of the same program (i.e. history graphs, numerical indicators, etc.).
Thanks,
Daryn

Daryn,
Yes. When you want to display the detailed information, call a subVI which has the desired indicators on its front panel. Under VI properties (Window Appearance >> Customize..), set it to Show front panel when called and Close afterwards if originally closed. These options have been avaiable since the LV 1 or 2 days.
Lynn

Windows 7 64-bit on A88X-G43 and have no sound

I just replaced my dead Motherboard with an MSI A88X-G43, with an AMD A10-6800K and 2 4GB sticks of G.Skill Ripjaws X Series RAM.
Main Board: A88X-G43
Bios Version: E7793AMS V3.3
Video Card: On-board video
PSU: Corsair VX450W
12v rail Rating of listed PSU:
CPU: AMD A10-6800K
Memory: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 2133 (PC3 17000)
SSD/ HDD: Seagate Barracuda ST3120026A
CPU COOLER: Stock
Raid Card: N/A
Sound Card: Built-in sound
Any Additional hardware plugged into your system: None
OC: (Yes / No) NO
Operating System: Windows 7 Pro 64-bit
1. Installed The Win7 Pro 64-bit OS
2. Installed MSI board drivers ("Total Installer")
3. Rebooted & got no Windows Startup "Song"
4. Played some mp3 files - nothing
5. Went to Investors.com (IBD site) and clicked on the Market Wrap video, which started playing, but there was no audio.
6. Checked Device Manager and everything looks good - no ! next to any devices, giving NO indication that there is a problem - just no sound.
7. Did lots of online searches and reading and found issues with the Realtek HD drivers and the KB888111xpsp2 update.
8. Under Sound, video and game controllers, in Device Manager, Uninstalled AMD High Definition Audio Device & Realtek High Definition Audio.
9. Rebooted and the system found the drivers and reinstalled them. Still no sound.
10. Put in a Technical Support Service Request with MSI. Below is my exchange with them:
End User 02/27/2014 I installed Windows 7 64-bit, installed the driver by clicking on the x icon. Things are working well, except my sound. I am getting NO sound from the headphone/speaker audio connection. I have connected known good speakers and known good headphones and am getting NO audio. I re-installed the Realtech HD audio driver and I still have NO sound. Please advise. Thanks you.
MSI Tech. 02/27/2014 It has everything to do with windows sp3. There is a glitch where you cant install windows hotfix kb888111 because sp3 thinks its newer then the hotfix. all you have to do is manually extract the .inf file from the KB888111XPSP2.exe file and load it for the questioned pci device. it will then detect the realtek hd audio device and you can then install the drivers.
11. I have extracted the 2 files in KB888111XPSP2.exe and placed them in a folder on my PC. However, since I have no problems showing in Device Manager and the Audio Drivers installed without any problems, I am stumped.
A little background: I am an Electrical Engineer by school and currently write embedded Software & Firmware, and often troubleshoot hardware problems. I have put many PCs together, so this is not my first rodeo. However, this problem has stumped me!
Please give me some detailed info on how to get my sound working completely.
Thank you for your time!
Jules

* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore

How can I improve the response time of the user interface?

I'm after some tips on how to improve the response time to mouse clicks on a VI front panel.
I have data acquistion application which used to run fine, but after spending a couple of weeks making a whole bunch of changes to it I find that the user interface has become a bit sluggish.
My main GUI VI has a while loop running 16 times a second, updating some waveform charts and polling about a dozen buttons on the front panel.
There is sometimes a delay (variable, but up to 2 seconds sometimes) from when I click on a button to when it becomes depressed. I have wired the iteration terminal of the while loop to an indicator on the front panel and can see that the while loop is ticking over during the delayed response to the mouse click, so I know that the problem is not that the whole program is running slow, just the response to mouse clicks.
Also, just for debugging purposes, I have indicators of the iterations of all the main while loops in my program on the front panel, so I can see that there are no loops running abnormally fast either.
One thing I've tried is to turn off multi-threading, and this does seem to work - the response to mouse clicks is much faster. However, it has the side effect of making the main GUI while loop run less evenly. I was trying to get a fairly smooth waveform scrolling across the screen, and when multi-threading is off it gets a bit jerky.
Any other suggestion welcome..
(I am using LabVIEW 7.1, Windows 2000).
Regards,
Mark.

Hi Altenbach,
Thanks for your reply. In answer to your questions:
I am doing both DAQ board and serial data acquisition. I am using NIDAQ traditional for the DAQ board, and VISA for the serial. I have other similar versions of this program that do only DAQ board, or only serial, and these work fine. It was only when I combined them both into the same program that I ran into problems.
The multiple while loops are actually in separate VIs. I have one VI that acquires data from the DAQ card, another VI that acquires data from the serial port, another VI that processes the data and saves to file, and another VI, the GUI VI, that displays the data in graphs and charts. The data is transferred betwen the VIs via LV2 globals.
The GUI VI is a bit more complicated than I first mentioned. It has tab control, with 4 waveform charts on one page, 4 waveform graphs on another page, and 3 waveform graphs on another page. The charts have a history length of 2560, and 16 data points are added 16 times a second. The wavefom graphs are only updated once per minute.
I don't use the value property at all, but I do use lots of property nodes for changing the properties of the graphs and charts e.g. changing plot colours, Y scale range etc. There is only one local variable (for the Tab control). All the graphs and charts have data wired directly to their terminals.
I haven't done any profiling yet.
I am building arrays in uninitialised shift registers, but this is all well under control. As the experiement goes on, more data is collected and stored, and so the memory usage does gradually increase, but only to the extent that I would expect.
The CPU usage is 100%, but I thought this was always the case when using NIDAQ with DAQ cards. Or am I wrong about this? (As a side note, I am using NIDAQ traditional, but would NIDAQmx be better?)
Execution priority of the GUI vi (and all the other VIs for that matter) is set to normal.
The program is a bit large to post here, and I'm not sure if my company would be happy for me to publicise it anyway, so I suspect that this is turning into one of those questions that are going to be impossible to answer.
Just as a more general question, why would turning off multi-threading improve the user interface response?
Thanks,
Mark.

Cannot install Windows 7 32-bit using Boot Camp

I have one of the new iMacs (late 2012) and I can't install Windows 7 32-bit using Boot Camp. Whenever I try to being the installation using the Boot Camp Assistant, I always get the following message: "Need 64-bit Windows installation USB drive or DVD. Boot Camp only supports 64-bit Windows installation on this platform. Please use an USB drive or DVD which contains 64-bit Windows". I have successfully installed 32-bit Windows on my Macbook Pro that is running the same version of Mac OS X and Boot Camp, but I don't know why on this new iMac it doesn't allow me to. Apple's documentation states that I should be able to install either 32-bit and 64-bit without any problem, but this is not the case here. I can't find anything about this problem/error on the Internet either. HELP!!!

AidenT wrote:
Yes, circumstances do change but if Apple is, as they claim to be, serious about seamlessly migrating what is still a large and dominant market share of users from Windows, supporting 32 bit versions is not a nice to have, but a must have.
I don't see why users have to make excuses when there is a clear shortfall of what is promised.
In other discussions, there is talk of an opportunity for Apple to make a significant impact, as Windows 8 has deviated so much from the comfort zone of traditional Windows users. But to make that change, Macs have to support what is still a primarily 32 bit environment in the installed base.
As for the use of VMs, I had a tough time migrating out of Parallels 6 after an upgrade to Mountain Lion broke compatibility so IMHO it is not a long term solution unless you are happy to hand out $50 every 2-3 years just to support the same functionality.
Use Virtual Box, it's free.
32 bit may have a reasonable user base but it's going away fast, if you must use 32 bit Windows and won't use a VM your choice is limited.
Buy a PC, or buy an older Mac.
The rest of your post is speculative and I won't go there.

SmartView 11.1.1.3.01 does not work right with Windows 7 64 bit

We have a user running Windows 7 64 bit and Smartview 11.1.1.3.01 that is having a host of issues
1. After initial install SV works as expected
2. If He either shuts his computer down or closes excel and reopens smartview he is not able to save data, nor when doing adhoc query analysis is he able to manually enter dimensions into the cells and click refresh. For example, He will open the connection and ad-hoc query analysis. Drag over the year dimension, enter FY12 in the cell, click refresh and FY12 disappears, he can manually choose it out of the tree and it will stay.
All Windows XP users do not experience this issue
any help would be greatly appreciated
thanx
mike

Which version of MS Office are they using?
Did you confirm the plugin was installed using the run as administrator windows command - as there have been issues when not using this caused problems too.
Can you try using the later version plugin: 11.1.1.3.500. Be careful though that you don't hit the following:
Issue: After upgrading from Smart View v11.1.1.3 to Smart View v11.1.1.3.500, the connection screen box is blank in Excel 2007 on Windows 64-bit systems.
Cause: The registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView was not updated during the upgrade and contained incorrect information.
Solution
In the registry editor, delete the registry key HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView and run the Smart View v11.1.1.3.500 install.
Note: By deleting this key, you will lose stored information for: Connections, Login, Options, Preferences. These will need to be recreated.
Cheers, Iain

OraOLEDB.Oracle Provider Not Found- Windows 7 64 bit Excel 2010 32-bit Help

Currently, I have an excel 2010 application that users on Windows XP 32 bit are using to connect to an Oracle 32-bit database and extract data back into Excel. Each time they open the Excel file, the VBA code automatically creates a new connection using Provider =ORA.OLEDB.Oracle Provider. All users using the Excel file have installed Oracle 9.2.1 run-time client on their machine. All of that works well currently for over 100+ users on Windows XP 32-bit
Starting very shortly our company is moving to Windows 7 64-bit. We acquired a test PC with Windows 7 64-bit and Excel 2010 32-bit. We tried to install Oracle 9.0.2 run-time client but we couldn't connect to the database ( even with Sql Plus). We therefore downloaded Oracle 10g 10.2.04 Run-time client. With this installed, we were able to connect to via SQL Plus to the database. However, using the same Excel file and the following same VBA code.
Set cn = New ADODB.Connection
cn.Open ThisWorkbook.getDBCon()
Public Function getDBCon()
getDBCon = "Provider=OraOLEDB.Oracle;" & _
"Data Source=MyOracleDB;" & _
"User Id=" & getDBUser() & ";Password=" & getDBPss()
End Function
I get a "Provider Not Found error". The VBA code and file work perfect in XP 32-bit. It seems going over to Windows 64-bit has caused issues with the file's macro. I am looking for help assessing if I have more of an Oracle Client issue or a Microsoft ADO issue. Any input would be greatly appreciated. Thank You.

@damorgan
Yea agreed with Excel to Oracle comment. This is due to issues with global implementation of an ERP system and the disconnets between IT and Business. Therefore the business intelligence tables in oracle are most easily pulled and acted on by novice PC users via Excel. In the business, Excel is the standard tool novice non-IT people feel comfortable in to share and act on data. Most of these users have no IT knowledge whatsoever, so we create buttons and filters for them to query and then massage in Excel as they see fit.
Having said that, still wondering if it's a ADO or Oracle Client issue. This is something beyond my knowledge. I wouldn't imagine it's the Visual Basic issue since this same file works in Windows XP. I am not in the position to just scrap Excel as the business relies on this in production and I am the only support. What could 64 bit vs 32 bit differences be having here? Thank You.

Muse 2014.3 update has an over-sized user interface.

The Adobe UI Scaling bug has reared its head again, this time with Muse (like with previous versions of PS, AI and ID before it). See screen grab that makes my 22" HD look like an old 12" monitor (see pasted at half resolution below).
I don't see anyone else with this issue posting, but I'm sure it's just a matter of time. Any suggestions? Do I have to go back to the Windows Environment settings again? I set it to =1 to fix one of the other applications a while back.

Sounds like your Win machine is set to run at 125% scaling (or thereabouts), is that right? Or do you have multiple monitors with different native resolutions, and the "one resolution to rule them all" setting engaged?
Previous versions of Muse would ignore the 125% scale factor and run at 100%.
The new release of Muse (2014.3) also does not support running at 125%, but can run at 150% and 200% scale factors. Muse 2014.3 chooses to run at 150% in this case. For many people with vision impairment or eye strain issues 150% is a better choice than staying at 100%, but we understand it may not be best for everyone. At 150% the cursors will be oversized as you describe (using 2x cursor artwork), but everything else will be drawn crisply at 150% scale.
In the short term, we can add support for an environment variable override similar to what InDesign and Illustrator used (see Application user interface too large | Windows). Would that address the problem for you?
One question, would it be better for you if Muse, InDesign and Illustrator all obeyed the same environment variable override, or would it be better if Muse used a different one? Now that ID and AI have exposed a user preference setting for UI Scaling (see InDesign's below), it might be better if Muse used a different environment variable so as not to override the user preference in AI and ID.
We will aim to add a similar Win-only user preference for the next release of Muse.
DaveB

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Can I install iTunes in separate user accounts on Windows Vista 64-bit?

Hi,
My wife and I use different user accounts on Windows Vista 64-bit. Before I go and mess things up on my computer, I wanted ask some questions:
1) Has anyone has successfully installed iTunes to multiple user account?
2) If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
I'm thinking with iTunes very tight integration with the music files (for indexing/searching, etc), that it would be bad to have add/change/delete on the same music root from 2 independent installations.
Experience OR opinions welcome!

) Has anyone has successfully installed iTunes to multiple user account?
You don't install the iTunes application more than once. Each user account in Windows will have its own iTunes library.
If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
Many people have done so. This should help:
iTunes: How to share music between different accounts on a single computer
Note that iTunes has no folder-watching capability, so if you add a track in one user account, the other user will have to add that new item manually, either by using the Add To Library command or dragging the item into the iTunes window. There are a couple of potential solutions from other developers, though:
http://albumbrowser.klarita.net/iTunesFolderWatch.html
http://www.lifehacker.com/software/itunes/hack-attack-automatically-sync-itunes- to-any-folders-175161.php
Thanks to Meg and Hudgie for the tips.

ITunes & User Account Control In Windows 7 64 Bit

I have an iPod Touch 5G, and a PC running Windows 7 64 bit. The latest Windows 64 bit iTunes with the latest update that was released a few days ago is installed. When the PC starts, a warning screen appears asking if I want to allow iTunes to run. This is the iTunes Helper app that wants to open first and stay resident so that if I plug in my iPod Touch it will be recognized and open iTunes as designed.
Yes, on the summary pane in iTunes, the “Open iTunes when this iPod is attached” option is checked and so is the option for connecting via wireless.
The only way to prevent this is to turn off User Account Control for the entire PC which of course should not be necessary if iTunes was working as designed with the proper certificates installed.
I have removed iTunes, Bonjour and the two other Apple apps that appear in Control Panel >Programs, then re-installed the iTunes Win7 64 bit file as administrator.
It's installed as the administrator and the only user on the PC, hence by default I am the administrator. I have also clicked on Properties for iTunes, Run as Administrator, but the UAC warning screen will still appear every single time I boot the PC.
How do I get iTunes to be properly recognized so that Windows doesn’t detect it as a rouge program trying to gain access that it’s not entitled to.
Furthermore, this also prevents me from drag & dropping songs from Explorer to iTunes. The only way I can drag & drop songs from Explorer to iTunes is to turn UAC off completely.This is a feature that is explained in the instructions as a means of linking songs from your Explorer folders so they reflect in iTunes.
This appears to have been an issue since 2010 as others have experienced it also, so hopefully by now the procedure for resolving it must have surfaced.

Quicktime does NOT start
Many thanks.
In recent times, the error-message-free iTunes and QuickTime launch failures have been indicating that another application has stashed old QuickTime componentry in your system files.
So just in case we'll go looking for older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

The new ribbon user interface in Win 8.1 should display appropriate buttons depending on the currently displayed folder within the explorer.exe window.

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

To begin with, in file-explorer (.\system32\explorer.exe) normally, the new ribbon user interface in Win 8.1 does indeed display appropriate buttons depending on the currently displayed folder within the explorer.exe window.
But when one re-parents the explorer window handle to any window handle other than 0000 (desktop's window handle), then the UIRibbon fails to do so.
You might ask 'Who does that ?' and I would say no-one usually, however I use BrightExplorer which
is a great little app that gives me a tabbed file-explorer experience.
Now, this app works fine since Windows 7, but with Windows 8 the file explorer introduced the new UIRibbon in its UI. It's that new UIRibbon that gets confused by what I think may be be caused by the re-parenting that BrightExplorer does
to pull a file explorer session into its tabbed control.
This phenomenon relates to Windows 8 + and is observed only by doing the following steps:
Download BrightExplorer from BrightNewWorlds.com by going here: BrightExplorer,
In the address bar go to This PC,
then go to any other folder and note that the UIRibbon is not keeping track of the changing folder selections.
Does anyone out there feel that they can do something about this, or have advise?
Kind regards,
Robert van der Meijden

CC 2014 user interface, Windows 7, 64 bit

Similar Messages

Maybe you are looking for