CC and Blackmagic 5.1 Audio

i7
Win 7 64
24 GB ram
Premiere CC
BM driver 9.7.5 (17th June)
I am trying to get 5.1 op via my BM decklink card.
In audio Hardware setup the Adobe Desktop Audio box only gives me the option of Premiere Pro WDM Sound but in CS6 also installed on this machine I get the aditional option of Blackmagic Audio, this is the one I need for 5.1 and the one I have been using for 3 years with CS6.
The BM driver is the one released on 17th June for Premiere CC. I have reinstalled it twice, it works ok in CS6.
The output mapping box lets me select the track order for the BM card but I can't select the card for op.

Do you mean the playback settings option? I get options of Blackmagic Playback, Adobe DV and Adobe Desktop audio under the Audio Device options (along with Blackmagic Playback for the Video)

Similar Messages

Blackmagic removed desktop audio functionality from Declink cards on Windows.... now what?

So, Blackmagic removed desktop audio functionality from Declink cards on Windows.... now what? After Effects is not programmed to talk to Decklink cards directly on the audio part, there is no ASIO, or mercury playback for the audio part, Blackmagic says it was never intended to be used as an audio card, yet up to last version of version 9 provided an audio driver for it, as a result, now any application not written to talk to the Decklink card directly, can't use the card for audio playback. I'm wondering if they think that the people that uses After Effects don't need audio at all.... rewiring all the rooms in the post productions facilities that had all the audio of all the system going out via the decklink cards it is not an option.
I'm wondering if Adobe is aware of this and if it have plans to support direct connection to the Decklink cards on the audio side of After Effects. This is a huge problem for all the people that uses AE and Decklink on windows and wants a profesiona quality audio monitoring. Audition, Premiere, all of those can work now, but not AE. I remember some time ago AE used to support ASIO, but I do not see that option anymore.

Adobe talks with Blackmagic regularly and we were recently made aware of this change. It is, clearly, not something under our control but we can provide feedback to them about your responses to the change.
You are correct, After Effects does not play back audio through Mercury Transmit like Premiere Pro does. This was something we considered for After Effects CC 2014 (CC), but at the time we were developing this release there was no urgent need to do so, and this would require significant work to re-wire how After Effects plays back audio. We will continue to talk with Blackmagic and evaluate what the best plan is going forward.
Please don't hesitate to file feature requests for us about these issues: http://adobe.ly/feature_request

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

Premiere CC and/or Media Encoder audio bad renders

Occasionally, but not always, when I export a timeline to Media Encoder queue, the video renders out with no audio.
I have not found a repeatable way to replicate this, but when it happens, it really blows up my workflow.
Typically I:
Import a ProRes 1080 clip into a fresh timeline, and only trim down the ends. Audio and Video playback great in premiere. I then, without changing anything, export to media encoder queue in h.264 1080p OR 720p (vimeo preset).
The queue runs and bang, video file with no audio.
My extended workflow is as such - once the h.264 file has arrived in the folder (it is a watchfolder), there are presets set to create OTHER Files - wav for CD, mp3 for podcast, DVD for distro, mp4 for podcast. So, as you can see, it snowballs into a trainwreck. I would also automate/schedule the podcast postings, but obviously I can't rely on media encoder/premiere to do it's job.
Has anyone experienced any lack of audio render issues? Is it tied to hardware at all, or is it just freak randomness? I even got to point to where I reboot the machine right before each original capture begins, but the error is always in the first render out of premiere.
I have checked for any muted tracks and such, and there are none. As I said, it is VERY random. For instance, this week, I dropped the capture into a timeline, exported as usual, and got a bad render. Did it again, this time moving the audio down a track. Still a bad render. Rebooted the Mac, tried it all again, and finally got a working render. This is the first time it has happened TWICE in a row, and I'm getting tired of it, as these renders are fairly long.
Any help would be much appreciated.
- Ben

Ben, I'm having the same issue. Never had it before yesterday.
I'm editing on CC with R3D's. I have 8 tracks of audio. When I'm exporting (either through Encoder or through Premier) I'm getting a final product that has no audio, and in its place a loud clicking sound. I performed a number of reboots and got it to export once. But I've tried dozen's of times now and can't get audio to export through this sequence.
When I go to render the project I'm getting an "Error Compiling Movie. Unknown Error" message. I suspect that's related. Not sure what's happening. I'm going to keep testing. I'll let you know if I discover anything. But it is VERY FRUSTRATING:( Deadlines are looming.
-Brian

Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy

Using CAN bus to transport and play the stream audio data

hello,
Just want to build a PC-Based control network using CAN bus (Ethernet not considered).The system is separated two parts , one is the front unit(FU), and the other is the centeral unit(CU). FU performs dialing-up number to the CU , and play the stream audio media data come from CU, CU monitor the telephone call activated from FU's user , send rm or mp3 data to the FU . I'd like to know if CAN bus could realize this function？ if it can , which hardware must be supplied ? Is there any suggestion that not use PBX to realize the voice (telphone) communication ? Please give an solution , your advise is greatly appreciated . Thanks.
David

Hi David,
the CAN protocol essentially just gives you the ability to transfer (broadcast) up to eight data bytes across the network at a maximum data rate of 1 Mbit/s.
There are so-called higher level (or layer) protocols that further specify the data exchange between a data producer can the consumer (DeviceNet, CANopen, etc.).
If your application is not tied to any of those protocols, that means you have the freedom to design all (CAN) nodes of your network, you can implement your own protocol based on the eight data bytes and the arbitration ID CAN offers.
For more information on the CAN protocol, take a look at appendix B of the NI-CAN Hardware and Software Manual, or visit the web site of CAN in Automation (CiA).
For your particular application you would need a CAN port on both the FU and the CU (preferably high-speed physical layer) and a PCI interface CAN card for you development.
-B2k

Imported a video file and there is only audio.

Imported a video file and there is only audio. It was originally captured from VHS onto a PC. It took over 24 hrs to import the 4.24 GB mpg.
Is there something I need to do since it was a mpg from a PC?

I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
Good luck, and happy editing,
Hunt

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

How can I identify and remove duplicate file (audio & photo)

How can I identify and remove duplicate file (audio & photo)? I have quite a few libraries created as backup files.

Terence,
Yes, the duplicates appear in the iPhoto window. I have folders with same name occuring two or even three times sometimes with exactly the same set of photos (ie photos with the same ID) and sometimes with a limited set of photos. Other folders appear only once.
I normally take my MacBook with me if I'm shooting a lot of photos, such as on holiday, and then want to transfer them to my iMac when i get home. Other times I transfer the camera's memory stick directly to my iMac.
I have great difficulty transferring the photos from my MacBook to my iMac. I don't want to store my photos on my iDisk due to the length of time it takes to upload them.
Thanks again.
Simon

HT1750 My computer has no audio. It had been working and last week the audio stopped working.

I have an Intel-based iMac and there is no audio. software: OS x 10.9.2
I have no audio.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram

My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output. Mac book Pro Lion 16gb ram. Can be any song, any time, same song will play if I select it again. Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

In the past when I have imported my dslr video/audio files and then my zoom audio files Final Cut Pro has organized them in pairs in my library. For some reason my video/audio and my audio are being organized seperately. How do I fix this? Thanks!

Thank you Russ! Seems as though the timestamp on my audio files was completely incorrect so it placed the files far away from the corresponding video. I've modified the timestamp information and this has helped. The hour/minute information is incorrect but at least now I'm in the ballpark. Thank you!

HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

Because line-in has been removed.
It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
You'll need to use a Griffin iMic or similar to use line-in via a USB port.
The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

Just down loaded SOA season 5 episode 4 and i dont have audio!!! its not listed in istore yet how do i redownload it???

just down loaded SOA season 5 episode 4 and i dont have audio!!! its not listed in istore yet how do i redownload it???

@wetdro
If your device has been jailbroken during the warranty, Apple will not service it.
Maybe you missed that in this article:
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

CC and Blackmagic 5.1 Audio

Similar Messages

Maybe you are looking for