CC Apps NOT Backward compatible with Master Collection 6.0...WHY NOT?!!!!

This is just horse doodoo. Adobe, you've already got us hooked and paying out the nose, so WHY do I have to save all of my files in an OLDER version (InDesign, for instance) when I'm working on them in Creative Cloud just so I can be able to open them with my MasterCollection6 I paid $3000+ for?
I should NEVER see the message: "Cannot save because file was created with a newer version Creative Cloud..." when I am working with your latest NON-MONTHLY CS6 Master Collection Apps. It is a pain in the a$$ and slows down our workflow.
PLEASE, either give your loyal Master Collection 6 customers updates that make our Apps compatible with Creative Cloud, or start making Creative Cloud Apps backward compatible with our 6.xx version!
Stop trying to hold us hostage with your plans to monthly-revenue everything we already paid thousands for, please!
Sincerely pisT,
Small Business Owner

New features in new software does sometimes mean that new files do not open in old software
Microsoft also does this... the new DOCX documents will not open in the old Word 97 (and, in fact, I had to buy MS Office 2003 because MS Office 97 would not even install and run on Windows 7)

Similar Messages

The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol. My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this. Any idea how it can be fixed???

The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????

Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT

XCelsius 2008 is not backward compatible with ver 4.5

Post Author: Joseph
CA Forum: Xcelsius and Live Office
I tried opening a project that was done with ver 4.5 but it just said that "Crystal Xcelsius is unable to load this file. This file may be corrupt or may have features that cannot be supported by this version of Crystal Xcelsius." So i guess I probably have to recreate the project in the 2008 version to take advantage of the new features available. So I imported the excel datasheet used in the old project to a new project in Xcelsius 2008 and tried recreating the objects from scratch. I had started with an accordion menu and two list boxes and then I decided to export to swf to test. However, the result was disappointing. I could only see the two list boxes but not the accordion menu. There was a message saying "Initializing..." that stayed. Does this mean I have to recreate the excel data from scratch as well?

Post Author: abrat
CA Forum: Xcelsius and Live Office
X2008 is backward compatible with CX4.5. But Jim is correct. There is a bug in X2008 which prevents it from opening some 4.5 models by double-clicking on the filename. They can be opened from the File > Open menu. This only affects opening the model.Due to the many changes between CX4.5 and X2008, the migration of old CX4.5 models is not clean. Differences will be seen. Most are cosmetic affecting only the look of the model. But some tidy up, color changes and re-alignment work must be done. There was no way to gain the benefits of X2008 and still keep CX4.5 models unchanged.Andy

Why am I forced to update my OS because the Cloud desktop is not backward compatible with OS X 10.6.8? [was: Why do you do this...]

Why do you do this... My mac is old pro running Version 10.6.8 and now I cant up load the creative cloud desk top app without updating the OS. Why cant these apps be backward compatible? I am perfectly happy with V 10.6.8 and my old pro..

There is no requirement to move on from your old pro. I still use mine.

Can't install Xcode 3 - "Could not reload Installer.app to be compatible with required install plugins."

Hello all, I can't install Xcode 3.2.6 on a fresh Lion install (created with a bootable flash drive from burning InstallESD.dmg to a FD w/ Disk Utility). I get the following popup message:
"Could not reload Installer.app to be compatible with required install plugins."
I'd rather not have to move to Xcode 4 and spend the time re-orienting myself with the interface. I also don't want any of my projects to break. Has anyone encountered this message before?
I'm running a 2010 13" MacBook Pro, 2.4 GHz Core 2 Duo, fresh install of 10.7 onto an Intel SSD, HDD in the optical bay. Thoughts?

I run Xcode 3 on another MBP (Early '08 15") running Lion, and everything works just fine. I had it working under Snow Leopard, updated to Lion, no problems. On this other one, I can't get it to install at all.
Xcode 3 will work just fine with the iOS SDK under Lion, which is what I'm working with.

Can I get an older version of an app that is compatible with my IOS?

Can I get an older version of an app that is compatible with my IOS? I understand that time marches on, and I'll miss out on newer apps and features, but there really should be a way to get the latest app that is available for your specific IOS. I think this is the one thing that makes me seriously consider dropping iPhone for Android/Google/Windows.

Thanks for the quick reply Niel! Well, I followed your instructions, and since it is an Apple App (Podcasts), they don't allow the older version evidently. It just grinds my gears. I get that it is no longer supported, and it may not work with newer podcasts, but let me deal with it not working on everything. As it is, it won't play anything since I can't download it! Thanks again.

Is The iPod Touch Backward Compatible With USB 1.1 Connections?

Hi. I intend to get the iPod Touch soon. But, before I make the leap, I'd like to know whether the iPod Touch is backward compatible with my older USB 1.1 connections. Any help will be appreciated here. Thank you.

Hello Castlegard,
As mentioned, the Minimum System Requirements for the iPod Touch does specify USB 2.0, see the requirements here:
http://support.apple.com/kb/TS1323
While it is theoretically possible to sync over a USB 1.1 connection, your mileage may vary. Consider that USB 1.1 has a transfer rate of 12Mbit/sec, where USB 2.0 is 480Mbit/sec, so USB 2.0 is basically 40x faster. Transferring small files may succeed, but when you try to get iTunes to update or restore an iPod Touch, it will be trying to push a 300MB file (approximately) through a 12Mbit pipe. Trying to do updates or restore via USB 1.1 will often result in iTunes timing out before the process is complete.
If I were to try to sync a 1.5GB movie over a USB 1.1 connection, I could probably go to downtown Sydney and have a nice dinner and attend a concert at the Sydney Opera House and still get back before the sync was complete. BTW, I live in California...
If your computer is a desktop tower, upgrading to USB 2.0 is a relatively inexpensive proposition. If you are not a handy person with a phillips screwdriver or electical devices, most computer dealers or resellers will install for a nominal fee.
Charles H.

Is a PCI-488.2-1M card backwards compatible with the 488-1975 standard?

Is a PCI-488.2-1M card backwards compatible with the 488-1975 standard?

IEEE 488-1975 is one of the early revisions of the IEEE 488.1 stardard, other revisions include 488-1978 and 488.1-1987.
Because the original IEEE 488 document contained no guidelines for preferred syntax and format conventions, work continued on the specification to enhance system compatibility and configurability among test systems. This work resulted in a supplement standard, IEEE 488.2.
So, both 488.1 and 488.2 support 488-1975
I checked the link and it is fine, make sure you have the right web browser settings.
http://sine.ni.com/apps/we/nioc.vp?cid=1233〈=US

When will USB 3.0 be truly backwards compatible with USB 2.0 audio interfaces?

hello
I own a U46DJ mkII audio interface. I use the interface for music production, particularly recording vocals.
The device performs well on my windows laptop, I can record clean vocals with no artifacts. On the macbook pro however, the incoming audio signal is full of digital pops and clicks.
After spending a few days searching for solutions on google I narrowed it down to the USB 3.0 ports on the new macbook pro.
Lots of people with with all different brands of audio interface are experiencing problems while connecting them to USB 3.0 ports.
Here is an article on the topic: http://createdigitalmusic.com/2012/06/usb-3-0-backwards-compatible-in-theory-but -some-audio-drivers-arent-cooperating/
So, when will USB 3 be truly backwards compatible with our USB 2 devices?

Tuesday. That's what I heard.
Perhaps the driver is the problem. Check with the interface manufacturer.
I have a Focusrite USB interface that sounds great but Pro Tools and Logic kept crashing when I used it. I went back and forth with Focusrite, they had several beta drivers which they sent me, none of which fixed the problem. Turns out the interface works better without the driver from the manufacturer.
I find it hard to blame Apple for this. It's not like they didn't have the ML beta out for a long time for all the device manufacturers to test their drivers and their hardware with. Apple can't keep tabs on every third party developer on the planet and design their software and hardware to keep all of them happy.
If you want to give Apple some feedback you can do it here: Apple - Mac OS X - Feedback

Are 3g chargers backwards compatible with first gen iphone?

so i know that older chargers don't seem to work on the 3g iphones, but are the newer chargers backwards compatible with the 2g iphones?
i was thinking of getting some after market wall & car chargers for my first gen iphone, but i rather buy ones made for the 3g iphones just incase i upgrade soon (and i don't want to repurchase the chargers)
anyone know?

well I'm aware that certain first gen chargers won't work with the 3G, but i've come across this 3g car charger which specifically states it's not compatible with a first gen iphone. strange.
http://www.monoprice.com/products/product.asp?cid=108&cp_id=10831&cs_id=1083105&pid=4871&seq=1&format=2
unfortunately it doesn't say if it's the same case with their 3g wall charger.

Is it possible to access a version of the Adobe Reader app that is compatible with iOS5.1.1?

We use iPads to access PDF prints in a manufacturing environment. We now can't access a version of the app that is compatible with ourhardware. Is there an access point to get the older apps?

Hi,
Yes! The App Store can provide the latest compatible version of Adobe Reader for your iPad running iOS 5.1.1.
Please take a look at the following forum post to get the dialog with the message "Download an older version of this app?".
Re: Reader on iPad 1
I just tried it with my first gen. iPad running iOS 5.1.1 and confirmed that Adobe Reader for iOS version 11.0.1 was successfully downloaded and installed on my iPad.
Please let us know if you need further assistance. Thank you.

Captivate 2 backwards compatible with 1?

Is Captivate 2 backwards compatible with Captivate 1?
For example, would it be just the new features that would be
disabled if I opened a Captivate 2 file in Captivate 1 such as
scenarios, or would the whole file be unopenable.
Also, how does the import work if I'm bringing a file in from
Captivate 1? Do I just open it or would I need to rework anything?
Also in Captivate 1, I've had to hand-write special htm files
for the Active X problem. Are these sorted out in Captivate 2?
I'm ready to release some training and I'm wondering if I
should upgrade it before it goes out, e.g. to add some scenarios.
But if it requires too much rework, I don't have the time right
now.
Thanks,
Kim

Hi Kim
For discussion about backwards compatibility,
Click
here
Yes, I do believe they have addressed the special coding
required to handle the "click to activate this control" message we
now see. So you shouldn't need to do anything special with respect
to this issue.
Cheers... Rick

What does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?

what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?

poobs wrote:
what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?
Nothing. The 2nd Gen Touch is OBSOLETE and is WAY past its support life. If you want to run the newer apps you have to buy a newer iPod.

Is NI-DAQmx 8.0 backward compatible with Lab View 7.1?

Is NI-DAQmx 8.0 backward compatible with Lab View 7.1?

YES it is but when you install it you must select support for LV 7.1 and 7.1 must be installed before you install daqmx 8.0.
Joe.
"NOTHING IS EVER EASY"

R7770-PMD1GD5 - Is it backwards compatible with PCIe x16 1.0a or 1.1?

Hello, does anyone know if the MSI R7770-PMD1GD5 is backwards compatible with the older PCIe 1.0a and 1.1?
I know all 3.0 PCie cards are supposed to be backwards compatible but I've read that some of them really aren't.
Thanks in advance.

gigabyte m68m-s2p http://www.gigabyte.com/products/product-page.aspx?pid=3498#ov

CC Apps NOT Backward compatible with Master Collection 6.0...WHY NOT?!!!!

Similar Messages

Maybe you are looking for