CC&B : Sub rates and proration

Dear CC&B experts,
We would like to use sub rates with CC&B 2.3.1 release but we are facing the following issue. During the lifecycle of a rate schedule, we would like to add or remove a sub rate with taking into account possible prorations.
For example, the sub rate 1 is effective only during year 2011 and the sub rate 2 is effective only during year 2012. If I create a bill across the two years, I would like CC&B to make a proration between the 2 sub rates. But this can not be done because a sub rate is linked to a rate schedule without effective dates.
One solution should be using rate versions inside a sub rate. For example, instead of removing a sub rate, we could create a new rate version that will bill nothing. As we can not create an empty rate version, we should add a dummy rate component in the new rate version that will do nothing. This solution works but, to my opinion, is a little bit dirty.
Do you have any ideas to solve this issue ?
Many thanks.
Regards,
Johann
Edited by: 884310 on 12 sept. 2011 02:12

Johann,
We use subrate for Rate schedules having similar set of tax rate components to gain the benefit of reusibilty. I think your proration requirement can be done by using 1 subrate with 2 Rate versions with proper effective date i.e. 2011 and 2012...
Regards,
Wasif

Similar Messages

Crystal report(Can i link sub report and main report Compulsorily) - invalid path

hi.
i need small clarification.
i am developing one Crystal report
main report i took it from rdr1 one table...
report is working fine..
Sub report i took it from inv1 one table.
i have not linked any fields from these tables.
May be it is having links in b1..
but in my other report both the tables.... from main report and sub report does not have any relation.
My Questions is..
Can i Compulsorily link fields to main report...
if both does not have any relation what should i do...
i took two tables.
main report rdr1
sub report inv1...
if i run the report it is asking two parameters one is for sub report and other one for main report working find in crystal report.
but...i want to run the report in b1.
while importing i am getting the error (Plz have a look on below image)
if i choose any other report it is importing fine...
Clearly i am mentioning i dont want to link both tables there is no links between two reports...
in this scenario can develop a report..
I need your Valuable suggestions.
here below u can find my developed sample report...
http://www.megafileupload.com/en/file/544758/NewReport-rpt.html

hi.
If i try only i am getting the error..
out side if i run i am able to run the crystal report but
in b1 i am not able to import the report.
you can also try my report
from below link u can get my simple report.
if u find any mistake what i have done plz inform me..
http://megafileupload.com/en/file/544806/NewReport85-rpt.html

Simply way to make sub vi and call it form main vi

I'm a beginner and have major problems to make a sub vi and call it from main vi. I'm going to do a save dialog where is extra info for my saving and want to call dialog from main vi and after that save info to a file or database. I want that save dialog appears after i press button. I attach sub vi where is no functionality yet.
Attachments:
save_dialogsub.vi ‏21 KB

The first step is to connect the controls and indicators that you want to pass information to and from your main vi.
You right-click on the icon at the top right corner of the Front Panel and select "Show Connector". Typically put inputs at the left and outputs at the right side of the connector pane. Save it.
Open the main vi. Go to the block diagram. Click on "Select a vi" inside the Functions Palette. And choose the sub vi you prepared. Then wire it up inside your main vi.
-JLV-

Sub-VI and main VI

My main VI calls a sub-VI. I used the get control value (variant) to get the graph in the sub-VI, and output it to the main VI in a cluster. I set the maximum y scale in my sub VI, and it works. But when I get the graph in the main VI, my maximum y scale doesn't look right. Shouldn't I get the same graph that I got from my sub-VI. Is there a way to fix this? Thanks

> My main VI calls a sub-VI. I used the get control value (variant) to
> get the graph in the sub-VI, and output it to the main VI in a
> cluster. I set the maximum y scale in my sub VI, and it works. But
> when I get the graph in the main VI, my maximum y scale doesn't look
> right. Shouldn't I get the same graph that I got from my sub-VI. Is
> there a way to fix this? Thanks
The Get Control Value function just returns the value, not the other
properties. Other postings point out what you probably want to do.
Greg McKaskle

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Help with Managing sub accounts and The page isn't redirecting properly

Anytime I try to make a new sub account, and I click on "Sub Accounts" I get this error:
The page isn't redirecting properly
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    *   This problem can sometimes be caused by disabling or refusing to accept
          cookies.
Before you ask, I'm a bit of a PC geek, I tried in both FF and IE8, same result, checked cookie settings, and they are NOT disabled etc.
Any ideas?
Solved!
Go to Solution.

Cookies are normal. The only exceptions are for SU.
I found a way to manage the sub accounts. Through Yahoo. Which is completely asinine. Why do I have to go to Yahoo's page when IT'S RIGHT IN MY VERIZON!?
I wish I could "unbrand" my dsl service.

Remote Site with its own CUCM Sub#2 and Router network failed and the site didnt keep its phones active, need some assistance

I have a Pub and 2 Sub's. Sub #1 is with the Pub, at the main site it is our TFTP server, Sub #2 is at a remote site with about 100 users along with a router and 2 PRI's for outbound calls. We had a network failure between the main site and the remote site and all phone lost their registration with the system until we were able to get the network back up. Currently the network is up in a crippled state on a 1 T-1 link while we troubleshoot the bigger issue with our 6mb pipe, however Sub #2 and its associated router arent talking with the PUB or other Sub. I'm still getting alerts every 30 minutes stating they are the server is down. I'm sure once the network is corrected this will bring everything back on line. My question is how can I prevent in this in the future. I need this site to be stand alone if the network goes down again. I was told by our vendor that if we had a subscriber at each site then we would need SRST licensing. I know something needs to be configured to make it all work, I'm just not sure what.

I already have a group at the site but it includes both the Pub and Sub from the main site as well as the Sub from the remote site. I would only have to remove the Sub from the main site, problem is I currently only have 1 TFTP server it runs on SUB #1, should I make SUB#2 a TFTP server as well and the phones are setup for DHCP at the main site, I'm going to need to have a DHCP server setup at the remote site as well. Correct?

I switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it

i switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it please advise

You should be able to turn it off on the iPad by using 'a tap-to-select and then double-tap to activate/type process' and 3 fingered scrolling to go into Settings > General > Accessibility and turn it 'off' (so to use the 'slide to unlock' tap the slider and then double-tap it, and to type your passcode tap a digit and then double-tap it etc), or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Ceartion of User Defined Field in EXCHANGE RATE AND INDEXES

Hi Experts,
I want to create User Defined Field in EXCHANGE RATE AND INDEXES.But while creating the UDF from User Defined Field-Management unable to find the table for it.Write now My Client are using SAP B1 2007 Ptach-08.Is there any way out to create user defined field in EXCHANGE RATE AND INDEXES.
Plz help me out on this issue.
with regards,
Pankaj K and Kamlesh N

Pankaj,
When you do the Manage User Fields area to define a UDF, all the possible areas where UDF's can be created in B1 is listed. You would be able to create UDF's only on these.
Suda

Okay so i had an iphone 5. I backed it up on icloud. Then i got the new iphone 5s i restored ot from icloud from my previous iphone 5. Now everything works find execept now the games are slowy and drops the frame rate and look choppy. Please help.

Okay so i had an iphone 5. I backed it up on icloud. Then i got the new iphone 5s i restored ot from icloud from my previous iphone 5. Now everything works find execept now the games are slowy and drops the frame rate and look choppy. Then i restarted my iphone 5s as a new device downloaded the same apps even the ones optimized for ios 7 and the games still lag. And i just got my iphone 5s replace. The funny thing is. While im playing games and their running choppy and slow and if i take a snap shot inside the phone. They run smooth and HD but just for a few seconds and boom they go back to slow and choppy. Is it the ios 7 or the iphone 5s it self? Like i said this is my replacement iphone 5s because the other 5s did the same thing. And it was running slowly.

As far as I know you can't delete the primary email address for an iCloud account. It's assigned when the account is created. But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password. Are you sure the account wasn't still on your phone when you gave it to him?
You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't. Make an appointment with the genius bar at a nearby Apple store and have them take a look at it. If necessary, they should be able to contact iCloud support for you.

Sub folders and Process multiple files in Photoshop Elements 10

I am looking to apply the same adjustments to numerous images in numerous sub-folders and overwrite the original images.
Using the Process Multiple Files options, I added the main folder (which contains no images) to the Source field, selected the Include All Subfolders tick-box, also selected the Same as Source tick-box (which warns you original files will be overwritten) and then completed the image adjustments I required. However, after running the process all the adjusted images were saved in the main folder and did not overwrite the originals contained in each sub-folder. Does anyone know if there is a setting I am missing to replace the images in the sub-folders or is this by design ?

bossti a écrit:
hi, so is it possible to keep the same subfolder structure as output location? regards! bostjan
No...
I think you are going to run great risks in trying to use batch process like 'process multiple files' or 'export' while relying on subfolder structures.
- the organizer is much more powerful with its database and keywords management than a folder structure organization,
- Batch processes are limited in Elements
- 'Good practice' calls for keeping originals intact.
What are you wanting to do exactly ? We might be able to suggest alternative workflows.

Maximum audio sample rate and bit depth question

Anyone worked out what the maximum sample rates and bit depths AppleTV can output are?
I'm digitising some old LPs and while I suspect I can get away with 48kHz sample rate and 16 bit depth, I'm not sure about 96kHz sample rate or 24bit resolution.
If I import recordings as AIFFs or WAVs to iTunes it shows the recording parameters in iTunes, but my old Yamaha processor which accepts PCM doesn't show the source data values, though I know it can handle 96kHz 24bit from DVD audio.
It takes no more time recording at any available sample rates or bit depths, so I might as well maximise an album's recording quality for archiving to DVD/posterity as I only want to do each LP once!
If AppleTV downsamples however there wouldn't be much point streaming higher rates.
I wonder how many people out there stream uncompressed audio to AppleTV? With external drives which will hold several hundred uncompressed CD albums is there any good reason not to these days when you are playing back via your hi-fi? (I confess most of my music is in MP3 format just because i haven't got round to ripping again uncompressed for AppleTV).
No doubt there'll be a deluge of comments saying that recording LPs at high quality settings is a waste of time, but some of us still prefer the sound of vinyl over CD...
AC

I guess the answer to this question relies on someone having an external digital amp/decoder/processor that can display the source sample rate and bit depth during playback, together with some suitable 'demo' files.
AC

Account determination - exchange rate and valuation

Hello All,
we have a problem concerning our account determination for differences in exchange rate and valuation. When clearing open vendor items in foreign currency, a percentage of the difference goes to our exchange rate difference account (correct), but the other part of our difference goes to the account we have configured for valuation (incorrect).
Before, we had, in "Account Determination for OI Exch.rate differences" (transaction FBKP) , the following configuration for all our accounts in foreign currency:
Exchange rate difference realized:
Loss: 66800000
Gain: 76800000
Valuation
Val Loss: 66800100
Val Gain: 13600000
Bal sheet adj: 40099999
Now, we have the same accounts,except for "Bal sheet adj", for which we have 5 different accounts depending on the account to be valued. This change shouldn't have any effect, but since then, every time we clear an open item (KR and KZ), one part of the difference goes to an exchange rate difference account, while another part goes to valuation, when this last account should only be used when running F.05.
Any help?
thanks
Daniel

Asha,
Revaluation is a 2 step process - In the first step, the documents entered in FC are converted into LC and then in the second step all the LC is converted into GC using the GAAP/Quarterly Rate.
During the first step, the difference is posted to a P/L Account and during the second step, the difference is posted to a B/S Account.
Coming to the open item clearing getting posted to the same accont defined in the step 1 - I would ask how are you doing the open item clearing ?
If it's manual through F-44, then i would say the accounts you are mentioning during clearing are wrong.
If it's through Payment Run, You would have to go FBZP -> Bank Selection and then check the g/l accounts mentioned over there.
Hope it helps..
Thanks,
Nandita

Changing the RTP packetization rate and size

Has anyone worked out how to simply change the packetization rates and payload sizes? I am trying to packetize a sound file (.wav or .pcm) to use 160 byte payload at 20 ms pacing. I have tried several suggestions with no luck. I have used all the tools I could find around here (TX, AVTransmit2, AVTransmitter, RTCPSocketPlayer) and have not been able to do this.
What would be great is a modified version of say, AVTransmit2 that can do this.
Thanks
--Joe

The change was made in this area of AVTranmit2. I changed the packet size and the codec. I also use a .pcm sound file (saved a wave file using windows sound recorder as 8000 pcm mono). I have several. I also modify the run time to match the length of the pcm file.
// Program the tracks.
for (int i = 0; i < tracks.length; i++) {
Format format = tracks.getFormat();
if (tracks[i].isEnabled()) {
if (format instanceof AudioFormat) {
Codec codec[] = new Codec[1];
codec[0] = new com.sun.media.codec.audio.ulaw.Packetizer();
((com.sun.media.codec.audio.ulaw.Packetizer)codec[0]).setPacketSize(160)
System.err.println("Start transmission for 1800 seconds(30 minutes)...");
// Transmit for 1800 seconds and then close the processor
// This is a safeguard when using a capture data source
// so that the capture device will be properly released
// before quitting.
// The right thing to do would be to have a GUI with a
// "Stop" button that would call stop on AVTransmit2
try {
Thread.currentThread().sleep(1800000);

CC&B : Sub rates and proration

Similar Messages

Maybe you are looking for