CC&B V2.2 Base Batch Scheduler

I am looking at the base batch scheduler and need to know how this interacts, if at all with the new lightweight batch.
Can someone confirm the following about the base batch scheduler.
1. This scheduler does not use the lightweight batch as it is based on the 1.5 platform.
2. All batch jobs use the full framework jvms and therefore start up times for the batch jobs take more time.
3. It cannot submit multiple batch streams at once.
If you have 2 or more independent batch streams and want to run them at the same time, you cannot do this.
4. You cannot run batch jobs on different servers.

What we like to do is use the new CLUSTERED facility using the supplied base batch scheduler.
We intend to use 2 servers for batch processing
To do this we have to run the threadpoolworker.sh on both servers.
The documentation states in the "Online Batch Daemon" section that there 2 configurations
a) that one server can be configured as both Batch Scheduler Daemon and Batch Server Enabled
this allow both the submission and execution of batch in the same application
b) two servers may be configured one as batch Schedule Daemon and one as Batch Server Enabled
This does not provide a mechanism to use bot servers for batch execution.
Under this configuration this does not support CLUSTERED mode.
Under this situation only 1 server executes the batch programs.
Under the section "External Scheduler Submission"
The thredpoolworker.sh utility section states
A worker JVM may also host a scheduler daemon, which, if activated inside a worker, will poll for job submission requests from the web application
that were done via the Batch Job Submission transaction.
This seems to imply that you can:
a) have a batch environment that does not have the Online batch daemon or the Batch Server Enabled and have
b) configure 1 threadpoolworker on server 1 with a scheduler daemon configured
c) have another threadpoolworker on server 2 but no scheduler daemon configured.
Can you confirm this or advise how we can configure CC&B with the base batch scheduler to use the CLUSTERED processing on 2 servers.
Thanks in advance
Edited by: Paul Brown on Aug 26, 2010 9:07 PM

Similar Messages

  • Batch scheduling of chains

    Hello Experts,
    I have a process chain that is scheduled to start with settings: 'start later in background' and 'option immediate'? Is this not the same as 'immediate' start?
    What is the difference between the 2 ways of setting a batch job?
    Hope you can advise.
    Thanks,
    Adette Rosenthal

    hi,
    I'll give you one examples ,Just go thru it.
    Load the data from your info structure from the OLTP system to the BW System. To do so, create an InfoPackage with the name ‘Delta initialization’ for your InfoSource ‘Xyz’ and source system ‘ClntMN’. Make sure that the update mode is set to ‘Initialization of delta procedure’. <b>Schedule the InfoPackage to be loaded immediately</b>. Use the Monitor function to monitor the data loading process.
    Batch schedule:
      You need to define job parameters such as start time and printer settings, and schedule the batch jobs
    at this point.
    If you start later in background , then you cant monitor all the functions and also cant check all the functions carried correctly or not.
    This option is used when we schedule the jobs on daily basis.
    Hope It helpS...!!!
    Thanks & REg
    Varun CN

  • Financial Reporting Batch Scheduler Error - EPM 11.1.2.1

    Hi,
    I just downloaded, installed and configured 11.1.2.1 on a test server. Defaults were used and all products have been configured to run on the same database (SQL Server). Mostly everything seems to be working, but when I try to open up "Batch Scheduler", I get an error:
    Code: 0
    Description: ; nested exception is:
    com.hyperion.reporting.util.HyperionReportException: ; nested exception is:
    *java.sql.SQLSyntaxErrorException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Invalid object name 'FR_SCHEDULER_DATA'.*
    I click on "OK" and I'm in the Batch Scheduler window, but then when I schedule a batch, and click on "Finish", I get a Warning "A member must be provided for the Prompt":
    Code: 2021
    Description: A Member must be provided for the Prompt
    The scheduled batch does not show up in the Batch Scheduler window though.
    Any ideas on how I would go about rectifying this error?
    Thank you
    Dan

    Hi,
    I just realized that I was connecting to an instance of SQL Server running 2000. Redid the deployment against SQL Server 2008 and everything's working fine now.
    Thanks
    Dan

  • Java error while opening Batch Scheduler in Hyperion Workspace

    Hello Guys,
    I get this error while trying to open the Batch Scheduler in Hyperion Workspace. Please assist.
    Error:
    ; nested exception is:
    java.lang.NullPointerException

    Hello Everybody,
    I have recently installed Hyperion 11.1.2.2(Foundation Services and Interactive Reporting) in our environment.
    The installation and configuration are successful. Also when I ran a sample BQY it works fine.
    If I try to run the sample programs on the Hyperion server in their actual location, they work fine.
    I am having problem setting up the SDK remotely and run the sample program.
    I am getting the following error when trying to run the sample Login.java provided in /EPMSystem11R1/products/biplus/SDK/samples/java/
    Unable to setup SDK for Hyperion 11.1.2.2 remotely
    Please help, thanks in advance

  • Batch Scheduler Workspace

    Hi All,
    I have scheduled Financial Reports from workspace for the Vendors (Vendors is a dimension in OTL), but for some vendors I am getting the following error:
    error during JRMP connection establishment; nested exception is:
    java.net.SocketException: Connection reset by peer: socket write error
    Thanks & Regards,
    Marco

    Refer: Error: "java.lang.NullPointerException" While Opening Batch Scheduler (Doc ID 1462084.1) and FAQ Financial Reporting Scheduled Batches in 11.1.2 and later. (Doc ID 1431407.1) in MOS
    Access the Hyperion database BI+ repository. In table FR_SCHEDULER_DATA update the row with Column STATE='4' from a '4' value to value '3'
    HTH-
    Jasmine.

  • Batch Scheduler in HFM

    We have been trying to use the batch scheduler in HFM and have not yet had any luck on having the reports emailed out automatically. It looks like the reports in the batch are running ok but they aren't going to anyone in the specified distribution list. I'm not sure where to start to see if we have everything set up to use this feature. Does anyone have any suggestions?
    Thanks.

    I'm not sure. Unfortunately I'm not too familar with the IT side of it. This is definitely something that I can have our IT people look into. Do you have any advise on what I can tell them to look for? HFM is new to us and we don't have too many IT people that are knowledgeable about the system. I've tried to look for instructions on how this should be setup but haven't had much luck.
    Thanks for your tip.

  • Batch Scheduler doesn't print

    Hi,<BR><BR>I am using Batch Scheduler for Hyperion Reports. Whenever, I select the "Print" option I don't get any output on the network printer.<BR><BR>I can see the printer in the drop down menu. I have unistalled and installed the network printer several times on the server where reports is installed. I do not even get any error message. In fact I get a message "Successfully sent to the printer".<BR><BR>Any ideas?<BR><BR>-Hank

    I think I've discovered my problem, I had a security password set. I wanted to keep my form from being altered - but this won't let it print. I'd like to make the forms unalterable, but still printable, if anyone knows how.
    Thanks!

  • Batch Scheduler

    Hi ,
    I am trying to schedule a custom Java batch program using CCB Batch scheduler .
    As I tried , I did not have any event activation alorithm to specify in WokFlow Event Type .
    So I am creating an alorithm first . While doing this , Ain lgorithm Type Section , I selected WorkFlow Even Activation . In that , I am not getting the Batch Program Name in the lookup. I have closed eclipse , and restarted server also . So can anybody tell me how to setup a custom Java Batch Program . Please mention as much as detailed explanation you could .
    thanks .

    How are you doing this now? If you had HAL you could the Scheduler that comes with windows.

  • Batch Scheduler - why it is not in menu?

    Hi,
    Im using EPM Workspace 11.1.3 Fusion Edition. My user has Scheduler role assigned, but in my Navigator-> Schedule menu there is no Batch Scheduler option!
    I've tried changing user roles, creating new users, restarting server but with no effect. Why is this happening? Is it a matter of some configuration or service?
    regards,
    Paul

    Thanks, but how do I know which service should be running and is responsible for Batch Sheduler option in Workspace?
    Now I have those running:
    Hyperion Annotation Server
    Hyperion Apache 2.0
    Hyperion Foundation OpenLDAP
    Hyperion Foundation Shared Services - Web Application
    Hyperion Workspace - Agent Service
    Hyperion Workspace - Web Application
    Is something missing? Where can I find all avaliable services ? Is BIPlus\bin folder is good place to start searching?
    regards,
    Paul

  • Export Workspace Batch Scheduler

    Hi,
    I was wondering if there is anyway to export the log information from the Workspace Batch Scheduler.  I know you can export batches for command line scheduling, but I'm wondering if there was a way to export the actual information from the batch scheduler itself.  Basically a log file of all of the batches, when they were run, what time did they start, what time did they end, etc.  Anyone know if this is possible?
    Thanks,
    Jeff

    Jeff,
    Look for a table called FR_SCHEDULER_DATA. It has a column called XML (BLOB) which stores all the information about time, what members were bursted,....
    Start with the first JOBSTATUSMESSAGE
    <JOBSTATUSMESSAGE INDEX="0" KEY="4106" LF="true">
    <PARAMETERS PARAMCOUNT="2">
    <PARAMETER PARAMETERINDEX="0" PARAMTYPE="String" PARAMVALUE="&quot;My Sample Reports/Batches/Management Pack 1&quot;"/>
    <PARAMETER PARAMETERINDEX="1" PARAMTYPE="Date" PARAMVALUE="1402955727248"/>
    </PARAMETERS>
    </JOBSTATUSMESSAGE>
    PARAMVALUE of Date is epoch date and converts to Monday, June 16, 2014 4:55:27 PM CDT
    If the JOB_STATUS (STATE in the table) is 2 (successful) then you'll find another STATUSMESSAGE with the end time
    <JOBSTATUSMESSAGE INDEX="26" KEY="4123" LF="true">
    <PARAMETERS PARAMCOUNT="2">
    <PARAMETER PARAMETERINDEX="0" PARAMTYPE="String" PARAMVALUE="&quot;Management Pack 1 2nd Run&quot;"/>
    <PARAMETER PARAMETERINDEX="1" PARAMTYPE="Date" PARAMVALUE="1402955744832"/>
    </PARAMETERS>
    </JOBSTATUSMESSAGE>
    Converts to Monday, June 16, 2014 4:55:44 PM CDT
    Regards
    Celvin

  • Workspace batch scheduler error

    We just upgraded to EPM 11.1.2.1. This morning, a user scheduled a couple of new batches in Workspace to run FR reports. Those batches were hung at 'Running' and never officially completed but now I'm getting this generic error message every time I try to go into the Batch Scheduler:
    ; nested exception is:
    java.lang.NullPointerException
    I can not see any of the previously created batches (the screen is blank). I have already restarted all the services and the same error appears. Is there a way to clear out all the batches that it may be holding on to? Anyone else come across this problem?
    Edited by: 935031 on Sep 12, 2012 12:42 PM
    Edited by: 935031 on Sep 13, 2012 9:24 AM

    Refer: Error: "java.lang.NullPointerException" While Opening Batch Scheduler (Doc ID 1462084.1) and FAQ Financial Reporting Scheduled Batches in 11.1.2 and later. (Doc ID 1431407.1) in MOS
    Access the Hyperion database BI+ repository. In table FR_SCHEDULER_DATA update the row with Column STATE='4' from a '4' value to value '3'
    HTH-
    Jasmine.

  • Batch Scheduler Failing Randomly

    Hi all -
    I have a batch scheduled to run on demand.  It runs on ~130 custom members.  A few months ago it started failing on random custom members.  It will run successfully on most, but failed on some with the error:
    Problems encountered in "Financial Reports/01 - Monthly Financials/GA Reports/GA Burst Reports"
    ADM Error processing results from query: The remote procedure call failed.
    Every time the members it fails on are different and the number of failures fluctuates as well.
    Oracle Support suggested trying fewer members, but halving the number of customs involved still produces errors.
    Has anyone else had experience with this issue?
    Thanks,
    Sarah

    Hi,
    I am not aware of a way to schedule calc scripts through workspace.
    Though as Rosi said there is the business rules command line launcher, CmdLineLauncher in the bin folder of planning.
    You can also run calc scripts using command line with maxl.
    Once you have the scripts then you can schedule them.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Getting ANT_HOME is set incorrectly or ant could not be located. Please set ANT_HOME. Error while run Financial Reporting Batch Scheduler

    Hi,
    I am running Financial Report batch file via command line i am getting below error.
    D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ant -q -f "D:
    \Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\bin\BatchAdmin.xml" batch.schedule
    ANT_HOME is set incorrectly or ant could not be located. Please set ANT_HOME.
    D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>
    Already i have ANT_HOME =D:\Oracle\Middleware\modules\org.apache.ant_1.7.1 and added to ANT_HOME to the PATH variable. I restarted the system but still i am getting same error.
    Please help me on this.
    Thanks,
    Naresh

    Hi Celvin,
    Thanks for the reply.
    D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>BatchName
    D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ScheduleBatch
    D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin\BatchName.xml ht
    tp://localhost:19000
    D:\Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin>ant -q -f "D:
    \Oracle\MIDDLE~1\EPMSYS~1\products\FINANC~2\bin\BatchAdmin.xml" batch.schedule
    Unable to locate tools.jar. Expected to find it in C:\Program Files\Java\jre7\li
    b\tools.jar
         [echo] Batch accepted for scheduling: D:\Oracle\MIDDLE~1\EPMSYS~1\products\
    FINANC~2\bin\Sch-1.xml
    Now i am getting below information when i ran the scheduled batch.
    Why i am getting
    Unable to locate tools.jar. Expected to find it in C:\Program Files\Java\jre7\li
    b\tools.jar
    error.How to rectify this problem. How to make to point it to JDK path ? where i need to update ?
    I have already set JAVA_HOME setting to JDK path and updated in the "PATH" variable.
    Thanks,
    Naresh Mopala.

  • Workflow as a Batch Scheduler

    Hi All,
    Can Workflow be used as a Batch Scheduler to replace a Unix/Cron system? Bit of a broad question but I am sure some out there have maybe tried.
    I hear that in theory it can be but I have heard of hanging problems and reliability issues.
    OWB is currently in use in the batch anyway and the business would like to have all the batch rules logic in the repository.
    Cheers
    Clive.

    Hi,
    Broad question, broad answer - yes it can.
    I guess it comes down to whether you want to use workflow, and what you actually want it to do. If may be better to have a series of cron jobs, or scheduled jobs using DBMS_JOB etc. than using Workflow, but it can be done.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://thoughts.workflowfaq.com ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • Batch schedule won't allow me to enter "login credentials"

    Hello All,
    A most random thing happened today. I am on version 11.1.2.3.500 of EPM and was in the process of creating a Batch (for test) and after doing this successfully a number of times (10+), I deleted the batch I had created attempting to create a new one. However, this time, the database connection has come up blank as can be seen below.
    The 2 fileds highlighted below were originally editable, and the userid was filled in with "admin". I would normally just enter the password and proceed, however in this case, I can't write anything into either of the 2 fields highlighted below.
    This naturally creates a problem as I can not now see the dimensions from the reporting database - so can not select any dimensions!
    I've powered down the virtual machine, restarted my services (2x) and everything else looks and works fine except for this issue.
    Any ideas?
    Regards
    Dermott

    Thanks for the reply LRBS. I did spend some time going through the logs but they turned up empty and here's why...
    It turns out it was a corrupted BATCH. Somehow, each time I created a new "Batch Schedule" and used my original batch as a reference it made it impossible to edit/enter the correct login credentials for the server element.
    Hopefully this helps someone else in the future.
    Action: "Delete and recreate your Batch if you get this error."

Maybe you are looking for

  • Updating issues

    "songs on the iPod cannot be updated because all of the playlists selected for updating no longer exist" this has never happened to me before in all my years of ipod usage. help please?

  • Make text fit TextField

    Hi I'm new at this and do have a major (to me) prob. I'm using LC Designer ES ver. 8.2. I want font size to schrink as I type in a TextField, so the text allways fit and fill in a fixed sized TextField with multiline. I know how to make the TextField

  • ColdFusion Builder 3 Mac Eclipse Plugin

    I have been trying numerous ways to install CFBuilder 3 Trial into Eclipse 4.2.2 on Mac (Yosemite) and just cannot get CFBuilder to load the CF Perspective. I have tried in various Eclipse versions, and in multiple orders including just installing CF

  • Editing my cover music video in this fashion with about four/five shots on screen?

    Type of editing I am wanting to do with my cover videos (multiple shots start @0:46): http://youtu.be/CBrBnmT8zWI Hi everyone, I am a musician using Premiere Pro CS5.5 wanting to edit my cover music video in a fashion like the video posted above. The

  • I want to make thumbnail pictures of logo to have the full effect on Facebook

    I have some logos on Facebook and want to have their full names and not half of it.  How to make a thumbnail to have the full effect.  Any ideas?