CC download error in apps but still works fine, update error also
So i downloaded Creatice Cloud yesterday for my new computer, photoshop and premiere pro downloaded fine but after effect and illustrator says error, still both works fine..
This morning it says there's update to all of them, but when i try to update it says error right away.
You will have to run the cleaner tool and start from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium
Similar Messages
-
Iphone 5 got wet last week. Been in rice until today. It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo. Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back. Any ideas what to do?
At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
Regards. -
Hard drive makes a clicking noise on Mac. (But still works fine on PC)
When I plug my external hard drive into my PowerBook G4, it makes a odd clicking noise, the light flashes, and it never appears as a drive in my computer.
This is a clear sign of a broken platter, but when I plug the same drive into my Windows laptop it works perfectly. All the files are there, no noticeable problems. (The hard drive is formatted to FAT32, so it should be working with both computers.)
The USB ports are working fine on the Mac laptop, as I have tried the hard drive in each port and have the same problem, while I have tried other things in the ports and they work fine.
Thanks!I have a very similar problem with an external hard drive that I recently purchased. It makes a clicking noise but doesn't show up on as a drive on the desktop. I have looked in Disk Utility to configure the drive but it doesn't show up as an option as well. I went to the manufacturer website for support and it tells me that this is expected and that the recommended solution is to "initialize (partition and format) the drive with the Mac OS using the OS disk utility. Following the initialization, the drive will be identified almost immediately upon being connected to the system." (I don't need to use the hard drive on a PC for any reason.)
My question - is this safe to do? If so, how many times do I need to partition? -
WMP12 errors upon opening, but still plays fine
WMP 12 latest version, windows 8.1 update enterprise, HP elitedesk G1
When opening a wmv or mp4 file, WMP opens, then shows the error "Windows could not play the file".
HOWEVER, if you click close to close the error message, and then move the timeline slider 2 seconds into the video, and click play, the video plays just fine.
I have updated the sound card and video card drivers and disabled advance features, etc.
Is there a way to get the PC to ignore the perceived error, skip the message, and play it anyway? Because it will play.....Hi,
Could you please have a share with the full error message?
Please try to run the Windows Media Player settings/library troubleshooter:
1. Press Win+S, on the search box, type troubleshooter;
2. Choose troubleshooting, on the open window, select view all;
3. Find the Windows Media Player troubleshooting options and click to run.
Besides, please also take a try to reinstall Windows Media Player 12 via
turn Windows features on or off.
WMV and MP4 file type is supported in WMP12:
File types supported by Windows Media Player, so please also take a check with the file itself to see if it is corrupted.
Best regards
Michael Shao
TechNet Community Support -
i am updating creative cloud but under apps tab says failed to load error please retry but still will not work
Hi philip,
You may try to follow the steps below:
1.Close the Creative Cloud application.
2.Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
3.Delete the opm.db file.
4.Launch Creative Cloud.
Let us know if that helps,
Regards,
Rave -
i tunes wont download itouch restoring sotware it gets finished and gives me an error message saying the network conection timed out but its working fine what do i do?
I have this same problem, i though it was my internet (super slow) it would take 3 HOURS!! to download the update and then after all the waiting, it would say "network connection timed out" Ive restarted it and checked my settings over and over but it still says "timed out" wat should I do?!?
-
I bought the UnZipper, vV1.0.00 (4+) , couldn't download (it reported an error in the end), didn't install it but still, I was charged. Also I can't update "The Unarchiver", could I have any problems with my Mac? It's a one-year-old Mac Pro Laptop. Could you help me please?
Mac Pro, Mac OS X (10.6.8)Check under App Store/Purchases for your purchase. Install it from there again. ... Hopefully you did buy this from Apple's App Store, right!
-
when i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5
Hello Delaney1130,
It sounds like you are getting static on both the receiver and the speaker when you make a call. I would use the troubleshooting from the following article to help resolve the issue named:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I am unable to update apps on my iPhone 4. I tried rebooting but still I get an error message which says "unable to update"
I really didnt want to restore unless i had absolutely other option.
as per usual, apple wont help unless i buy an apple care plan. helpful much. -
I'm trying to download a purchased app but it keeps telling me my apple ID has been disabled. I've changed my password 3 times and it still says the same thing. what do I do?
Contact itunes support.
-
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
My iPhone 4 is using 4.3.3 and I want to update to iSO 6.1. I can back it up and it starts to download it through iTunes but then I get an error message 0xE8000067.
Tried all the things on the apple support site (checked USB port, deleted the 3 exe files in Task Manager, tried a new cable). None worked. Got the same message on my old computer.
Any ideas??Amazing help from apple support over the phone. Restoring the computer fixed the problem.
-
I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ? thanks CB
I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ? thanks CB
-
I purchased a movie on my brand new iPad air 64g. I'm connected to a strong wi-fi but still I get that error can't download over cellular. I have plenty of space. What is wrong? So frustrated.
IIRC, you can only download a maximum file size of 100MB with cellular.
-
I tried reinstalling but with to no avail. It worked well until yesterday so I downloaded new ver.5 but still it won't open. :( Please help.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br />
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Maybe you are looking for
-
Connecting a SharePoint 2013 Document Library to Outlook 2010 client
Good Day, Can someone please confirm if you can connect a SharePoint 2013 Document Library to Outlook 2010 client? I have seen articles, like the one shown below for Outlook 2013 to SharePoint 2013; http://www.sharepointgeoff.com/how-to-connect-a-sha
-
Why can I not open my emails on my ipad
I cannot open my emails I receive them ok but they won't open
-
Reading payroll results for an employee from ABAP-HR?
Hi, I dont know whether i must post this question in this category ? but i had a problem in reading of the payroll data for employees. I used the function of PYXX_READ_PAYROLL_RESULT and passed the PERNR(employee number), SEQNR, RELID(clusteri
-
I changed my Apple ID, now my iPhone won't recognise it - help, please
I changed my Apple ID, as my Yahoo account kept getting hacked. But now my iPhone won't recognise the ID - password stayed the same.
-
Can't see items on my desktop, do not appear
Hey everyone. I am really concerned because any items that appear on my desktop do not show up to me, and I can only find them through finder. This worries me as well as random things that are showing up on my desktop, random blank files. Does anyone