CC for Teams - File Share Limit?

I am the Admin for CC for Teams in my workgroup. We have 7 seats - 6 are on Mac/Mavericks and 1 is on PC/Win8. I'd like to share a folder with all 7 team members but seems to be limited at 4. When I go to add additional members, it goes into perma-spin, freezes and nothing happens. Is there something I'm missing? another way to add them?

There are two ways to share a folder - Send Link (people can just view via public link) or Collaborate (people can view and edit via private link). I am assuming you are using Collaborate. As long as the person you are sharing with has an Adobe ID you should be able to Collaborate with them. They are not required to be part of your CC Team.
You should be able to Collaborate with all 7 team members. Try clearing your browser cache and cookies and see if this helps. If not reply back and we will investigate further.
Send Link help: Creative Cloud Help | Share files and folders
Collaborate help: Creative Cloud Help | Collaborate by sharing folders
Clear Your Browser's Cache help: Errors or unexpected behavior with updated Adobe web applications

Similar Messages

FIrewall for Windows File Share for windows 2008

Hi All,
Recently we upgraded one of our application file server from Windows 2000 to Windows 2008. We use this server for file sharing. We used to read files and write files to this server. Post upgrade one week every thing went fine all of a sudden we started seeing
issues like the application servers stopped communicated to this server.
We worked with our firewall team and enabled port 445 post this the application servers started communicating to the file server. Our Application servers are on Windows 2003 server.
Can someone please help me understand what is the port that needs to be enabled for accessing the file shares. My firewall team confirmed there were no firewalls rules between the Application server and File server.

Hi,
Based on my research, firewall ports required for SMB file sharing are port 445 and 139.
More information for you:
SMB: File and printer sharing ports should be open
https://technet.microsoft.com/en-us/library/ff633412(v=ws.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Creative Cloud for teams File sharing

Is there a way to setup a folder that automatically shares to team members? Or a setting to automatically share all uploaded files to team members. Much like dropbox offers - you can link certain people to specific "job" folders and have those files automatically appear on the linked users computer.

James, It is not being vurrently offered, however, we will be coming up with an update very soon, with which this service will be in place.
Cheers
LP

How Can I Change the Ports for WebDAV file shares.

Title says it all. I have another piece of software using port 80 and 443, I'd like to create iOS shares using WebDAV but I can't find anywhere in the GUI to change the port numbers and I can't work out whether I need to do something involving Apache virtual hosts and if so which config files are relevant to the WebDAV server.
Someone must have done this by now, anyone know how its done???!!!!
Thanks in advance.

OK, so I worked out which files to edit and I actually managed to change the Apache/WebDAV ports on a clean 10.8 Server.
By clean I mean I installed 10.8.0, updated to 10.8.3 via the combo updater, then installed the latest version of Server app and configured the services.
Having done that I was able to make the required changes and all is working well. I then replicated the process on my live server but it throws up an error when I try to start up the WebDAV sharing.
This thread outlines the same issue:
https://discussions.apple.com/thread/4199421?start=0&tstart=0
I am getting this exact problem, in that any manual change at all to the 0000_any_443_.conf file will cause WebDAV to fail to start. This is annoying because I need to change that file. Its also annoying because the problem isnt there on my 'clean' server.
I deleted the entire /Library/Server/ folder and the Server.app and reinstalled Server.app from the App Store, recreating the /Library/Server folder from scratch. This cleared out the apache config files which I tried to re-modify, but all the file sharing settings were retained. Does anyone think it would be worth deleting all the sharepoints? Any other ideas?

Where to set UserID and Password for NFS file share in Central File Adapter

Hi All,
Does anyone know if/where it is possible to set the userID and password if you want to connect to an NFS fileshare with the central XI30 file adapter?
Cheers,
Frank

Hi Frank,
The file adapter uses user ID SAPSERVICE... with the addition of the system ID of your SAP XI system. So if your system ID is EXD the user id which needs read/write access should be SAPSERVICEEXD.
Have fun

File Share Witness Resouces Errors in a SQL 2012 Alwayson Availability Group Environment

Hi I am getting the following error in WFC Manager and in my system event log:
Event ID1564:
File share witness resource 'File Share Witness' failed to arbitrate for the file share '\\SQL2012ClusterWitnessPath'. Please ensure that file share '\\SQL2012ClusterWitnessPath' exists and is accessible by the cluster.
Event ID 1069:
Cluster resource 'File Share Witness' of type 'File Share Witness' in clustered role 'Cluster Group' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID 1205:
The Cluster service failed to bring clustered service or application 'Cluster Group' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service or application.
These errors showed up every hour on the hour and then suddenly stopped. I tried looking at the cluster.log file but there wasn't anything recorded there. The file share witness shows to be online and my AG did not fail over to another node.
The cluster has read and write permissions to the share. I did not find any error messages about the witness share on the remote server.
I am wondering what caused these series of events to occur?
Thanks.

Hi Kevin Ni,
Thanks for your reply. I have ran the validation test and I have 2 warnings. My environment has 2 nodes and 2 AG's with each node a failover for each AG. So that each node hosts and primary and a secondary of an AG. Both nodes are
on the same subnet. Here are the errors.
- Validate Multiple Subnet Properties
The RegisterAllProvidersIP property causes the network name to register all dependent IP addresses whether they are online or offline. Some DNS servers and clients in multi-subnet (multi-site) environments can identify the IP address that is in their subnet
and attempt connections only to that address. In such environments, it is usually best to set RegistrerAllProvidersIP to 1. This reduces DNS replication delays.
The RegisterAllProvidersIP property for network name 'Name: Listener1' is set to 1. For the current cluster configuration this value should be set to 0.
The RegisterAllProvidersIP property causes the network name to register all dependent IP addresses whether they are online or offline. Some DNS servers and clients in multi-subnet (multi-site) environments can identify the IP address that is in their subnet
and attempt connections only to that address. In such environments, it is usually best to set RegistrerAllProvidersIP to 1. This reduces DNS replication delays.
The RegisterAllProvidersIP property for network name 'Name: Listener2' is set to 1. For the current cluster configuration this value should be set to 0.
- Validate Network Communication
Node ONE.domain.com is reachable from Node TWO.domain.com by multiple communication paths, but each path includes network interface TWO.domain.com - TWO_NIC_Team. This network interface may be a single point of failure for communication within the
cluster. Please verify that this network interface
is highly available or consider adding additional networks or network interfaces to the cluster.
Node TWO.domain.com is reachable from Node ONE.domain.com by multiple communication paths, but each path includes network interface TWO.domain.com - TWO_NIC_Team. This network interface may be a single point of failure for communication within the
cluster. Please verify that this network interface
is highly available or consider adding additional networks or network interfaces to the cluster.
I have node TWO setup with NIC Teaming. Node ONE is also setup with NIC teaming but it also has a second IP address but the second IP address cannot communicate with node TWO.

AlwaysOn Cluster reboot due to file share witness unavailability

Hi Team,
Anyone came across this scenario in AlwaysOn Availability Group (two node), file share witness times out and RHS terminate and cause the cluster node to reboot. File share witness is for continuous
failover and if the resource is unavailable my expectation was that it should go offline and should not impact Server or Sql Server. But its rebooting the cluster node to rectify the issue.
Configuration
Windows Server 2012 R2 (VMs) - two node, file share witness (nfs)
Sql Server 2012 SP2
Errors
A component on the server did not respond in a timely fashion. This caused the cluster resource 'File Share Witness' (resource type 'File Share Witness', DLL 'clusres2.dll') to
exceed its time-out threshold. As part of cluster health detection, recovery actions will be taken. The cluster will try to automatically recover by terminating and restarting the Resource Hosting Subsystem (RHS) process that is running this resource. Verify
that the underlying infrastructure (such as storage, networking, or services) that are associated with the resource are functioning correctly.
The cluster Resource Hosting Subsystem (RHS) process was terminated and will be restarted. This is typically associated with cluster health detection and recovery of a resource.
Refer to the System event log to determine which resource and resource DLL is causing the issue.
Thanks,
-SreejitG

Thanks Elden, We were using DFS name for the file share! We gave the actual file share name and looks good now.
Few interesting facts, the failure happens exactly between window 12:30 PM to 1:30 AM and it never recorded any error specific to DFS! Not sure if there was any daily maintenance or task happens during the window pertaining to DFS.
+ DFS is not supported or recommended by Microsoft
Do not use a file share that is part of a Distributed File System (DFS) Namespace.
https://technet.microsoft.com/en-us/library/cc770620%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
Thanks,
-SreejitG

Exchange Server CCR 2007 unable to see the File Share Witness resulting in mailbox failover ?

Hi people,
Here's my Exchange Server 2007 SP3 in the ideal and normal situation:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox, Quorum) – 10.1.1.53
DREXMBX01-VM (Passive mailbox) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
Saturday early morning, for some unknown reason the Active Mailbox Server (PRODEXMBX01-VM)
cannot access or see the FSW on the HT server PRODEXHTCAS03-VM, thus
the mailbox gets failover to the DR Mailbox server (DREXMBX01-VM).
Here’s the Events logged:
Log
Name:      System
Source:        Microsoft-Windows-FailoverClustering
Event ID:      1564
Task Category: File Share Witness Resource
Level:Critical
User:          SYSTEM
Computer:      PRODEXMBX01-VM.domain.com
Description:
File
share witness resource 'File Share Witness (\\PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01)'
failed to arbitrate for the file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'.
Please ensure that file share '\\ PRODEXHTCAS03-VM \FSM_DIR_ExMbxCluster01'
exists and is accessible by the cluster.
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Event ID:      1177
Task Category: None
Level:       Critical
User:     SYSTEM
Computer:PRODEXMBX01-VM.domain.com
Description:
The Cluster service is shutting down because quorum was lost.
This could be due to the loss of network connectivity between some or all nodes
in the cluster, or a failover of the witness disk.
Run
the Validate a Configuration wizard to check your network configuration. If the
condition persists, check for hardware or software errors related to the
network adapter. Also check for failures in any other network components to
which the node is connected such as hubs, switches, or bridges.
So I had to perform manual failover back from DR to production so that both Active mailbox and the Quorum
are held by the Production Mailbox server (PRODEXMBX01-VM).
On Sunday Morning, the Event ID Critical 1564 occurred again thus causing only the quorum only to failover
to the DR mailbox server (DREXMBX01-VM) but the Active mailbox role is still held by the Production Exchange server (PRODEXMBX01-VM).
So now the situation is like the following:
Mailbox Server (CCR – Stretched Cluster) Nodes
PRODEXMBX01-VM (Active Mailbox) – 10.1.1.53
DREXMBX01-VM (Passive mailbox, Quorum) – 192.168.1.88
Hub Transport and Client Access Server Nodes
PRODEXHTCAS02-VM – 10.1.1.54
PRODEXHTCAS03-VM (FSW holder) – 10.1.1.55
DREXHTCAS02-VM – 192.168.1.89
So what causing the mailbox servers unable to contact the File Share Witness?
/* Server Support Specialist */

Did you check the blog above?
The account used in the clustered machine should have access to
\\PRODEXHTCAS03-VM\FSM_DIR_ExMbxCluster01. Please check the permissions. Try giving full permission to admins as well (just to try)
MAS
I've followed this (http://technet.microsoft.com/en-us/library/bb124922(v=exchg.80).aspx) instruction and there is no mentioning other than the Cluster Service Account.
/* Server Support Specialist */

Can I Load Balace a file share witness?

Hi,
I got AlwaysOn Availability Group working with a file share witness.
The file share reside on a server in my network, hence it's a single point of failure.
Can I put a load balancer endpoint for the file share path when configuring the quorum? (After the configuration I will manually copy the files from file share A to file share B, so they will be the same).
My concern is that I don't know if the quorum configuration changes(making the file shares not the same) without me initiating that change(failover or some other event).
Thank You!
(Originally I posted that question in "SQL Server High Availability and Disaster Recovery", but I was asked to move it to here.)

David,
on one hand you say that it is not a single point of failure, but on the other hand you say "or if you have other nodes fail in addition to the FSW". That means that if the FSW is offline I can't have automatic failover, a thing which puts my application
in danger since I relay on automatic failover.
For me not having automatic failover is very bad.
My network is in Azure, the FSW is on one of my web servers(web servers and the database cluster are on different cloud services), since I'm using availability sets I know that at least one web server will be up at any given time. It is possible
that Microsoft will do maintenance or there will be a failure on the infrastructure and the FSW plus one of my sql nodes will be down, I won't have automatic failover in that case.
If you got a solution for me I will be happy to implement it.
Thank You.

Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
We need it to be acceptable to all devices.
Thank you!

You can tell Apple directly at the link below.
http://www.apple.com/feedback/iphone.html

4GB File Size Limit in Finder for Windows/Samba Shares?

I am unable to copy a 4.75GB video file from my Mac Pro to a network drive with XFS file system using the Finder. Files under 4GB can be dragged and dropped without problems. The drag and drop method produces an "unexepcted error" (code 0) message.
I went into Terminal and used the cp command to successfully copy the 4.75GB file to the NAS drive, so obviously there's a 4GB file size limit that Finder is opposing?
I was also able to use Quicktime and save a copy of the file to the network drive, so applications have no problem, either.
XFS file system supports terabyte size files, so this shouldn't be a problem on the receiving end, and it's not, as the terminal copy worked.
Why would they do that? Is there a setting I can use to override this? Google searching found some flags to use with the mount command in Linux terminal to work around this, but I'd rather just be able to use the GUI in OS X (10.5.1) - I mean, that's why we like Macs, right?

I have frequently worked with 8 to 10 gigabyte capture files in both OS9 and OS X so any limit does not seem to be in QT or in the Player. 2 GIg limits would perhaps be something left over from pre-OS 9 versions of your software, as there was a general 2 gig limit in those earlier versions of the operating system. I have also seen people refer to 2 gig limits in QT for Windows but never in OS 9 or later MacOS.

Creative Cloud for Teams, 6 users, files on server, want them on cloud..

At my company we have 6 creative cloud for teams users and a server that we use to put all of our files on, i want to have all of those files sync to the cloud so we can all access them and they stay in sync with the server that they are all on. would i need to install creative cloud on the server (its a mac mini server) and sync it that way? i would need to take up an install and log in for the server computer correct? most of my team already uses their 2 installs on a mac pro tower and then on their macbook pros for when they telework or are onsite somewhere... just wondering what my process should be for getting our files on the server synced with the cloud for our team.. thanks!
-calvin

The feature you want is not available yet. Currently there is only individual file sharing, so one file at a time. Folder sharing is coming. You will then be able to share folders with specific individuals. We do not have a date for when this feature will be available.

Sharing files with Creative cloud for teams

HI,
I am looking at getting creative cloud for teams, but I want to keep our existing CS suite users who are already on maintenance plans.
Can I share files on the creative cloud between these two types of users?
Does Adobe Bridge see these files ?
Is there any way of doing version control ?
We are also worried about this
"If a team member leaves the company, what happens to their files stored in Creative Cloud?
The IP is associated with the individual, not the company. The individual will have a 90-day grace period to delete their files."
Also we are in Australia and we are concerned about the speed. Can anyone advise what the speed is like ?
rgds Renovator

Anyone who signs up for the Creative Cloud can share files. You do not need to be a Creative Cloud member to view a shared file, only to do the sharing.
Adobe Bridge does not see the files unless you use Creative Cloud Connection to sync the files to your local computer.
There is no version control yet. It is on our road map.
Being in Australia should not be an issue, but I will let other customers from Australia comment.

Can somebody can tell me is CC for team can support to save the files in the local area without using the cloud ?

Can somebody can tell me is CC for team can support to save the files in the local area without using the cloud ?

The desktop applications are still installed on your computer, and the files are also saved on your computer.
Optionally you can upload files with a browser to https://creative.adobe.com/files, or sync up files using the file sync that is part of the Creative Cloud desktop application. The online file storage is private to you, no one else can see it your files.
If you do want to share your files there are two options:
You can Collaborate, which is sharing a folder with another Adobe ID. Only the person you collaborate with can see the folder.
You can use Send Link to send a publicly accessible url to a file or folder.

Error while adding file share for File Server role

I'm getting this error when trying to add a file share on a Server 2012 R2 failover cluster:
"Unable to retrieve all data needed to run the wizard. Error details: Cannot retrieve information from server. Error occurred during enumeration of SMB shares: WinRM cannot complete the operation. Verify that the specified computer name is valid, that
the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM firewall exception for public profiles limits access to remote comptuers within the same
local subnet."
Despite the message, I can still create the share and it seems to work, but I'm concerned there may be an issue and I'd like to resolve it before putting the service into production. TIA!

Hi,
Your error often caused by the WinRM can’t communication to the others node, please confirm all the node “Windows Remote Management” service is running or try to disable your
firewall and AV soft then monitor it again.
More information:
WinRM (Windows Remote Management) Troubleshooting
http://blogs.technet.com/b/jonjor/archive/2009/01/09/winrm-windows-remote-management-troubleshooting.aspx
WINRM
http://blogs.msdn.com/b/powershell/archive/2007/10/30/winrm-exe.aspx
Installation and Configuration for Windows Remote Management
http://msdn.microsoft.com/en-us/library/aa384372(v=vs.85).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CC for Teams - File Share Limit?

Similar Messages

Maybe you are looking for