CC Indesign stops responding when waking computer. Solution?

OSX 10.9.5
Indesign CC 2014 10.1.0.71 Build
Everytime I wake up my computer in the morning, after being asleep from the evening before, Indesign becomes unresponsive and I have to force quit and restart the application. This happens on a regular basis. None of my other programs that are open at the same time have this issue. Anyone else having these issues?
Doug

Lots of users report this. Close ID properly before you leave for the night.

Similar Messages

  • Safari stops responding when I try to bookmark (and other slow problems!)

    Two weeks ago my logicboard died, so I sent my ibook out to Apple for it to be fixed. Ever since I got it back this past Tuesday, my Safari has been extremely slow, but nothing else is wrong with my computer. Here are the problems:
    - The biggest issue is that Safari stops responding when I try to make a bookmark. The popup appears to select the bookmark's destination and to enter the name, but when you hit ok, the rainbow wheel comes up and it stops responding, so I have to reset Safari, and now I can't make new bookmarks at all.
    - It lags when it tries to open new windows, especially new tabs.
    - If a new page loads that scrolls at all, and then I try to scroll down, the wheel appears for several seconds until it can load the rest of the page. It's as though it gets stuck before it can scroll.
    - Sometimes when typing, it will also start to lag behind my typing speed, or if I try to click on a new field, it will not immediately allow me to type on occasion.
    All these things have never happened before I sent it out. I have reset my cache, and I have tried entering the open DNS addresses in my networks, which has improved loading speed, but hasn't fixed any of these problems. Does anyone have any idea what could be wrong and how I can fix anything?
    Message was edited by: canyon to the sky

    Try verifying the hard disk.
    Boot from your restore disk while holding down the C key until you see the Apple logo, then let go of the C key. You'll see an Installation window, select English. From the Menu Bar, select Utilities/Disk Utility. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Verify. If DU reports errors, click Repair. If Disk Utility cannot repair the disk you have several options. One is DiskWarrior or
    TechToolPro If Disk Utility can repair any errors, go back to the Menu Bar, click Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
    If you don't have a restore disk, try booting into Safe Mode
    Carolyn

  • After I upgraded my Mac with Yosemite, Photoshop Elements 12 stops responding when you use editing tools like eraser, clone stamp.

    After I upgraded my Mac with Yosemite, Photoshop Elements 12 Editor stops responding when you use some tools like eraser, clone stamp.

    This should help. Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
    ~ Arpit

  • Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

    Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

    First, go install the MacOS 10.10 updates - you should be on 10.10.2.
    I haven't heard of Photoshop not responding during opens and saves.  Does it stop responding while the open/save dialogs are visible, or while Photoshop is actually reading or writing files?
    10.10.1 did fix a crash in the open/save dialogs, but 10.10.2 still has some odd issues (mostly program errors coming from the OS code) in the open/save dialogs.

  • Thunderbird stops "responding" when I try to enter a password why? this is new today.

    As of this afternoon Thunderbird stops responding when I attempt to enter a password. The accounts have been working for years with thunderbird until today. I can open thunderbird in "safe" mode but that is not useful since plugins are disabled.

    I ended up removing v 1.0.1 of "Provider for Google Calendar" plugin; installing v 0.25, then re-setup the Google calendar
    These instructions are where I found the different location link to use while setting up the calendar in thunderbird/lightning.
    https://sites.google.com/a/tc.columbia.edu/tcapps2/home/how-to/accessing-email-and-calendar-with-thunderbird
    The gmail calendar location prior to today was linked to a "googleapi://... .../?calendar=email address... etc." link.
    After I added the new gmail calendar to thunderbird the location link is to "https://www.google.com/calendar/feeds/... etc."
    Provider for Google Calendar versions:
    https://addons.mozilla.org/en-US/thunderbird/addon/provider-for-google-calendar/versions/

  • After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding, do anyone have any ideas what problem it can be?

    After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding on certain moment, i tried to reinstall freshly and update to version 9.1.5 but problem same so at this moment version is 9.1.6. I tried 64bit too but no changes. And the thing is that i need studio and i need to sort this problem quick.
    Please everybody if you had same problem give me answer or any idea what to do
    Thanks

    The sample rate is not 128 or so, you probably mean the buffer size...
    But the performance drop makes sense: switching between a 64 bit process and 32 bit doesn't come free: it cost performance and creates a jitter, which also either shows as performance lost or instability.
    You really have to move away from outdated 32 bit AudioUnits, sorry. Ask the vendors to finally release 64 bit versions, it has been several years since 64 bit is available.

  • IPad mini stops responding when trying software updatea

    IiPad mini stops responding when clicking "agree" when updating software

    Close all apps on the iPad, reset the device and then try the update again.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • ITunes stops responding when I plug in my iPod.  I have updated iTunes to latest version, still crashes.  OS is Vista.

    iTunes stops responding when I plug in my iPod.  I have updated iTunes to latest version, still crashes.  OS is Vista. How do I fix this?

    Hm... Strange.
    I had reset the iPhone.
    I tried disabling the auto-launch of iPhoto, and...
    ...when I plugged iPhone in, it started to freeze iTunes, but after a minute or so, the iPhone started synching. I found this odd because I had disabled auto-sync (I press Sync in iTunes when I want to have it Sync).
    Now, of course, I do want auto-launch of iPhoto back on, since I like it for when I attach my digital cameras. I hope that when I set it back, it won't re-introduce the problem.
    The restart I did may have helped. I resist restarting because my wife's account is often open and she frequently leaves unsaved files up, so it is a pain to respectfully close out her work and then restart.

  • ITunes stops responding when iPod is connected to the computer

    This weekend I switched from Windows Vista to Windows 7 with a custom installation of Windows 7 to completely replace Vista (I did not do the upgrade that lays 7 on top of the Vista installation, and I did completely remove the windows.old folder that is left on the hard drive after the installation of 7 is complete). Until tonight, I have had no problems with reinstalling all of the software I need.
    When I first installed iTunes, everything seemed to be working fine. I had no trouble importing my songs from the backup I had made before changing the OS. However, as soon as I plugged in my iPod, iTunes froze and stopped responding. I had to shut it down through the Task Manager, and had to use Windows Explorer to eject the iPod so I could disconnect it (I could not restart iTunes with the iPod connected). Now when I plug in the iPod, Windows 7 tells me I should scan the "drive" because it did not shut down properly.
    I tried several times to get iTunes and the iPod to sync, but the same thing occurred each time. Finally I did a complete uninstall of iTunes, QuickTime, Bonjour, and a few other Apple products, rebooted, and reinstalled iTunes to try again. The same thing happened again, except this time I cannot even shut iTunes down using the Task Manager. I am sure that iTunes works with Windows 7, so there must be something on my end that is causing the problem. If anyone has any thoughts, I would greatly appreciate it.

    What happens when you try?
    Can you sync music?
    Have you synced apps from this computer/iTunes library before? You an only sync app from the one syncing computer you can have.
    Are the apps compatible with your model iPod/iOS
    Do you have restrictions set that would prevent installation of those apps?
    Settings>General>Restrictions

  • Firefox stops responding when starting

    Basically, Firefox has worked fine for 3 months on this computer, no problems. I haven't installed any new add-ons since I set it up initially. I closed out of my session, went and had lunch, came back and now within 5-10 seconds after starting up Firefox, it freezes. I deleted my cache and nothing changed. I can't use the profile manager because you have to be in Firefox to do so, and it immediately stops responding.
    I did a complete reinstall after wiping everything that I could, and it worked for one full session. When I closed it and opened it again, same thing as before. Only thing different from today from yesterday was a single game installation (Sim City 4 what whaaat), otherwise there's been no change to my computer's files.
    Any help?

    Are you getting any error message or no
    When Firefox hangs, it stops responding to your clicks and keystrokes and doesn't seem to be doing anything. Also, a "(Not Responding)" label is displayed in the title bar and the mouse becomes a spinning wait cursor when it's over the Firefox window. This article gives you solutions to Firefox hangs depending on when they happen
    https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding?esab=a&s=stops+responding&r=0&as=s#os=win7&browser=fx17

  • Programs stop responding when I try to print to PDF

    Info on what I'm using:
    OS: Windows 7 Home Premium, SP1, 64-bit
    Using Adobe Acrobat 8 Professional, version 8.1.0, up to date on updates
    In this example, Microsoft Office 2007, no add-ons besides the Adobe Acrobat add-in that allows the creation of a PDF (but happens in all programs)
    Problem:
    I have always created a PDF from a Word/Excel document by printing to PDF (File --> Print --> Select Adobe PDF as printer --> Hit OK). Generally, the next step that occurs is a dialog box appearing that prompts me to select the location where I want to save the PDF and to specify a file name. Several weeks ago, this process stopped working. Now when I hit "Ok" to print to PDF, no dialog box appears and whatever program I'm in freezes/stops responding. Aside: I have tried printing to PDF from several other programs to see if the problem occurs in those as well, and it does -- printing to PDF freezes whatever program I am attempting to print from. (For example, MS Paint, Internet Explorer, Firefox, even Notepad)
    Bullet point summary of what I have tried:
    Canceling the print jobs in the Adobe PDF printer under "Devices and Printers" (jobs say they are canceling but never clear from the print queue unless I go into Services and restart my print spooler) and reprinting (freezes again)
    Restarting computer (had no effect)
    Setting Adobe PDF as my default printer (had no effect)
    Setting TrueType font as "Native TrueType" under the Adobe PDF printer properties (Layout --> Advanced --> PostScript Options) (suggested in another thread I read about this problem; had no effect)
    Checking to make sure that Word had not "adjusted" the security settings for the Adobe add-in (disabling it) under the Trust Center (Adobe add-in was still enabled, so nothing to change there)
    Changing the printer properties to print directly to the printer rather than spooling first (had no effect)
    Saving as PDF using File --> Save As --> Selecting PDF as file type (does work and is an acceptable substitute except when I need to convert multiple files to PDF at once and don't have time to go in to each individual file and convert it separately)
    Repairing the Acrobat installation from within Adobe or from the Programs and Features menu under the Control Panel (does work, did fix the problem; but see followup below).
    Repairing the Acrobat installation worked when I did it a few weeks ago. Once I went through the process, I attempted to print a document to PDF and it worked. But this morning when I attempted to print another document to PDF, it froze Word again and has been doing that ever since, so it does not seem to be a permanent fix. I had succesfully printed several documents to PDF this morning before it stopped working; the document I printed to PDF immediately before the document that froze was the exact same as the document froze in every way except the actual text (formatting, document objects, etc.). So I don't think it was something in the content of the document that "broke" the Adobe PDF printer.
    I am sure I can try repairing the Adobe installation again, but I really do not want to have to do that all of the time. Does anyone know what the problem is? I haven't found anything that explains what's going on.

    Anyone?

  • Firefox stops responding when I try to play words with friends, eventually a box pops up about script

    First, let me say I have the latest version of Firefox and Adobe Flash Player and Java Script. When I click to play Words With Friends (on pc) my computer starts racing and sounds loud and every thing freezes. If I try to click on slider or anything else, it says Mozilla Firefox (not responding), then it takes several minutes and a box pops up that says something about a script, do I want to continue or ?(I can't remember), after I click continue, I can play the game, but, at any given time Firefox will stop responding again!! A box also pops up from AVG saying that Firefox is using too much memory. Just an aside, I can play Scrabble on Facebook without any problems whatsoever. Please help, it is driving me crazy. Thanks

    Sounds that you are missing the plugin that is used to play those videos embedded in Firefox.<br />
    Your system details list doesn't show any media player plugin, so you will either have to check if the plugin(s) are installed, but disabled or install missing plugins.
    *https://support.mozilla.org/kb/Popular+plugins
    You may need the new WMP plugin (np-mswmp.dll) because Flash always uses a dedicated player to play the videos and would never offer to save videos directly unless an extension is used.
    * https://support.mozilla.org/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
    * http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

  • Photoshop stops responding when creating a 11x8.5 collage

    I've been using Adobe Photoshop Elements 11 for a couple of months to create 11x8.5 photo collage's as part of my digital scrapbook. Yesterday, when I tried to create a new collage the program stopped responding and forced me to close it. It will only do this with an 11x8.5, it's not a problem for any other size, unfortunetly the rest of my pages are 11x8.5 so I really need to be able to use this size! What could possibly be causing this?

    I have this same problem and the suggestion didn't help me.  Does anyone know of a solution?
    I've tried it in both the Organizer and Editor interfaces and tried selecting and de-selecting the box indicating "Autofill with Selected Images". 
    8.50 x 11.00 works fine, but 11.00 x 8.50 - crashes every time.
    "Adobe Photoshop Elemets 11 has stopped working.  A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    Would love to find a solution.

  • Silverlight plugin stops responding when starting a movie on Netflix

    Same crash report every time:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 37.0.2.5583
    Application Timestamp: 552ef76c
    Fault Module Name: mozalloc.dll
    Fault Module Version: 37.0.2.5583
    Fault Module Timestamp: 552ee9ae
    Exception Code: 80000003
    Exception Offset: 00001aa1
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    When I close Firefox (using Task Manager), Firefox is still running under processes. After closing and reopening, error does not occur again until a reboot. I have followed the various "fixes" on various sites (including this one) and none works. I have uninstalled and reinstalled. I have uninstalled all add-ons. Unistalled/reinstalled Silverlight. Error continues. Does not occur on IE or Chrome. Moving to Chrome if a fix is not found. Started with upgrade to 37.0

    Are you getting any error message or no
    When Firefox hangs, it stops responding to your clicks and keystrokes and doesn't seem to be doing anything. Also, a "(Not Responding)" label is displayed in the title bar and the mouse becomes a spinning wait cursor when it's over the Firefox window. This article gives you solutions to Firefox hangs depending on when they happen
    https://support.mozilla.org/en-US/kb/firefox-hangs-or-not-responding?esab=a&s=stops+responding&r=0&as=s#os=win7&browser=fx17

  • InDesign Stops Responding During Launch

    I'm having a problem with InDesign CS2 (v 4.0.5) on a Mac running OSX 10.3.9. It's been working fine for months, but now when I start InDesign, it stops responding during the "Executing Startup Services" phase.
    I've deleted all of the preference files for InDesign, as well as the .plist file. I even removed InDesign from the system and re-installed it, but I'm still having the same problem.
    Note that all of the other CS2 applications work fine.
    Does anyone have any suggestions for correcting this problem?
    Thanks

    CS2 runs just fine here in XP mode. I suspect the problem is the activation, which can no longer be accomplished becasue the activation servers were shut down. For licensed users of CS2 programs Adobe has posted downloads of versions that do not require activation at Adobe - CS2 Downloads

Maybe you are looking for