CC Installer initialises and then closes!

I'm trying to install Creative Cloud again after previously uninstalling it. However, when I try and download it, the installer initialises, but then closes and nothing else happens!
I've tried downloading on different browsers and have restarted my laptop (Windows 8) and still no luck.
Please help!

Hi Abzie,
Please follow the below mentioned steps:
1. Win: Navigate to C/Program Files(X86)/Common Files/Adobe/OOBE and rename it.
Navigate to C/Program Files(X86)Adobe/Adobe Creative Cloud and rename it.
2. Mac: Navigate to /Library/Application Support/Adobe/OOBE and rename it.
Navigate to Applications/Utilities and trash Adobe Application Manager and Creative cloud folder.
Try installing again and let us know whether it worked.
Regards,
Romit Sinha

Similar Messages

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

Bug Report: [VIsio 2010] whenever I try to save a diagram to JPEG and then close Visio using the X button, Visio hangs

Greetings
I use Visio 2010 in windows 7 64bit
and I have this problem:
whenever I try to save a diagram to JPEG (save as>JPEG) and then close Visio using the X button on the upper right corner, then Visio hangs.
The jpeg pic is saved ok, but Visio hangs permanently: I have to close it using task manager.
On the other hand, if after I save into jpeg, I press whatever other button in Visio (from ribbon) then it works ok, and afterwards I can close Visio with the X button
- but, if I try to close Visio with the X button right after saving to JPEG, Visio will surely hang.
Thank you
PS. Visio 2010 is fully updated (File>Help reports:
Visio 2010 Premium (v14.0.6111.5000) SP1 MSO (14.0.6112.5000) 32bit)

Update:
The problem reappeared/wasn't completely solved:
So, I also went to Control Panel>add/remove programs, rightclick on Adobe Acrobat X> change installation and untick the PDFMaker item, in order to uninstall it:
that's because initially, even after I had unticked "PDFMaker for Visio AddIn" in COM Add-Ins,
in File>Options>Add-Ins tab, on the Active Application Add-Ins part (yes, on ACTIVE Add-Ins)
I was still seeing about 5-6 lines, all having items containing PDFMaker for Visio AddIn" [PDFMVisio.vsl].
In other words, the PDFMVisio.vsl file was loaded even if unticked!!
Then, after uninstalling the add-in, the problem was finally fixed at last!
Thank you so much for this additional information! I was having the same problem. I did what you instructed, and the problem has now disappeared!

Internet Explorer 11 freezes/glitches when in Anz banking website and comes up" Anz isn't responding" and then closes down.

HI,
I've been having trouble with ( IE) Internet Explorer 11 version:(11.0.9600.17207IS )-(KB2962872) for over a year on my desktop with ANZ Internet banking, when i go into this website, it freezes and comes up" Anz isn't responding"
and then inside of icon comes up "Recover Webpage" so I click that and then it comes up"Windows is checking for a solution to the problem" and then closes down.
But on my laptop I have no trouble with Anz and it has a different version:(11.0.9600.17207).
Can some one tell me what the IS is on the end of the first version mean and how can I install the version without the IS on end of number on my desktop, as this version is causing the problem.
I have been in Microsoft Community with Yaqub Khan-Microsoft Support Engineer and he recommend me come here, as we have done many steps without problem fixed.
Do you know how I can copy that info from there to here, so you can see the steps we have already done, or can you go in there and see.
Thanks
Brewy

thanks Brewy,
I thought you were Mark..... and were
using a MS internal network....(Brewy responce)-Sorry about that, that was a quote from
Mark in this section in someone's thread and answers Microsoft gave me
instructions how to get into this section, so since its the first time, was
quite sure how to go about it)
I have a vodaphone usb stick also....
they use geotracking and inject code into pages, but I don't have any problems
accessing the site form either a mobile connection or an adsl public access
network.
Do you have both your ADSL and USB
stick connected? (BREWY)-I have only one connected at one time and this has been
the case for some years without a problem, until early last
year.)
What anti-virus software and version
are you running... Is it a trial or subscribed and up to date version. You
should use only one Anti-virus product and completely uninstall any AV products
that came with your PC purchase that you do not purchase. (BREWY)-I have had
Microsoft Security Essentials-(MSE) and have had AVG and didnt fix anything.
I've got MSE also on laptop with no problems.)
Does you PC have finger print
recognition... is it turned on?( I don't have this function.)
If you do not want to pursue the
problem any further, you can uninstall the Windows update
(Windows>Update>View Installed Updates) and remove that KB update, and
wait until the IETeam or Windows teams release the next update. However, not
every body is being impacted by that update item... the cause is more likely to
be your computer's configuration and third party software that you have
installed. (I've uninstalled/installed IE11 about 6 times to see if it hasn't
configured properly and problem consist, it would be good if there was a program
to see diagnose exactly what the problem is. If I could get the version without
the (IS)on the end, it should fix the problem, its just trying to find out what
installed update will take it back to the IE11 version on my
laptop.)
these are peer to peer support forums.
We do not work for nor represent MS. This forum is for
Questions regarding Internet Explorer
8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered
are: Installation, Deployment, Configuration, Security, Group Policy, Management
questions. If you are a consumer looking for answers or to raise a question,
it's highly recommended you head on over to answer. Microsoft.com(I was firstly on answers Microsoft
for a few weeks and they recommended me come to TechNet.)
Regards.
Rob^_^

Administrator permission required, and then closes.

Attempting to download Photosop CC. Message says administrator permission required and then closes. I would love to have a spot to type in adminsitrator password. Suggestrion appreciated. Thanks

Thanks, kglad.
I'm using an apple laptop. After downloading the installer, double clicking the installer thats when the administrator permission required shows up. Usually there is a spot to type in my password but not this time. I've tried double clicking/right clicking but am unable to get past the error.

The window 8 store and all other app open and then close immediately .

The window 8 store and all other app open and then close immediately .I
have tried many methods like sfc /scannow,, powershell
-ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml without the quotes but , changed registery entries but found no effect . kindly help me !

Hi ObaidMaki,
This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
I would suggest you posting it in the dedicated Windows Forum
http://answers.microsoft.com/en-us/windows for more efficient responses, where you can contact Windows experts.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! Any suggestions?

When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info??? Any suggestions?

To reset, press and hold the Home and power buttons until the silver apple appears.
I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
Best of luck.

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted!

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!

I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

When I try to open Adobe Reader, it just opens a gray page and then closes by itself. This also appl

When I try to open Adobe Reader, it just opens a gray page and then closes by itself. This also applies to any pdf files I try to access; they'd all follow the same pattern: Gray page-->automatically closes after 2 to 3 seconds time. I have tried accessing the Eula.exe via C:\Program Files (x86)\Adobe\Reader 11.0\Reader, however, the only available button for me to click is the "Decline" button and not the "Accept" license agreement. Please help!
THanks

Thanks for your help!!!!

I am having to run v3.5.10 because even now with latest 3.6 that version - every 30 seconds or so I hear a process open and then close. Can't track it down even in task manager - too brief but it's insistent! So stuck having to use 3.5

I have to use V3.5.10 despite wanting to run 3.6 (just updated to 3.6.6 too). However when I run 3.6 I hear thru my sounds set up a process open briefly and then close every 30 seconds or so - it's very regular and insistent and I'd like to know what it is and why. It's too brief to spot in Task manager processes listing. This did happen once under 3.5 I seem to recall but was cured when it upgraded.
== This happened ==
Every time Firefox opened
== Pretty much soon after I first applied and ran 3.6

My Win sounds give me a sound each time an app or process opens and another when it closes - thus I know from that any time something happens.
I have 3.6.6 on as well as 3.5.10 - so can run either. But running .3.6.6 despite being update still has this odd process open and close every half minute.

Spry Accordion - Tabs open and then close after page loads

I am using a Spry Accordion menu driven from a database.
The menu opens up during the page load and then closes.
I'm using SpryAccordion.js 1.6.1
And to open a preset tab, I'm using:
<script type="text/javascript">

</script>
But, all of the tabs open and then close on page load.
My page:   http://www.texashotjobs.us/00C01.aspx
Any fix for this??
Thanks, Ron

Well to both thanks. Actually I wasn't disappointed as I had a two part question...
I tested the 1.6 JS and remembered that I had to modify the 1.4 so that tabs actually would link. So I reverted back to 1.4.
So, going to 1.6 fixed the open panel on load but "unfixed" the panel tab from linking.....
So changing this in the 1.6 js fixed the link issue as well:
Spry.Widget.Accordion.prototype.onPanelTabClick = function(e, panel)
    if (panel != this.currentPanel)
        this.openPanel(panel);
    else
        this.closePanel();
    if (this.enableKeyboardNavigation)
        this.focus();
//    if (e.preventDefault) e.preventDefault();
//    else e.returnValue = false;
//    if (e.stopPropagation) e.stopPropagation();
//    else e.cancelBubble = true;
I t appears everything is working........
Thanks, Ron Gaddis
Visual Reality Productions

Before I upgraded to 8.0 I could double click and see all open Apps and then close them. Now when I double click I am not sure what I am seeing or what to do?

Before I upgraded to 8.0 I could double click and see all open Apps and then close them. Now when I double click I am not sure what I am seeing or what to do?

The format keeps changing but the basics remain...in the center of the screen are large images of the recent apps which you can close by swiping up and away.

Downloaded Apps open and then close immediately

The downloaded apps, not the apps that came with the phone, close immediately after i open them. i have reseted it multiple times and it doesnt work. HELP!!

Hi there,
I too have just experienced this, I suspect because I hooked my iphone up to a friends laptop when visiting on holiday (in Canada) and thought that rather than opening a new topic, I'd add on the end of this one...
I have tried all suggestions found on Google (a restore, de-authorising my laptop and re-authorising with the itunes store, not syncing apps, downloading a new app (on the iphone and on my laptop) and then re-syncing and none of this has worked.
Interestingly, if I download a brand new app via my laptop and sync it to my iphone, it works but all of my old apps restored from the backup open and then close within 2 seconds.
Can anyone help?
Thanks!

TS1702 i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. pls help as am frustrat

i've an iphone 3.1.3. sometimes, i have problems opening all the apps i downloaded in the past 4 months. other apps would open but the recent ones will begin to boot and then close itself. once, it persisted for over a week. it staarted again this evening, pls help as am frustrated. NB- i checked for apps update but all my apps are up-to-date. CT

Try the usual steps: restart, reset, restore.
http://support.apple.com/kb/HT1430
http://support.apple.com/kb/HT1414
If restoring using a backup doesn't help, try restoring the iPhone to factory settings and try for a while with just the Apple-included apps, to make sure it's not an issue with a third-party app. If it still has problems, it may have a hardware problem and will need to be sent to Apple.
Regards.

CC Installer initialises and then closes!

Similar Messages

Maybe you are looking for