CC MultiCam cannot make cut edits

I have the PC version Pr CC Version 7.0.0 I am trying to use the multicam function to edit a video from three, 60 minute long videos from a dance recital. The raw files are Canon MXF files shot at 1080, 30P, 35 MBPS. I used the Adobe tutorial video "Using Multicam Mode to auto-sync multiple angles or takes" to setup my 3 MXF files as a multicam sequence. Everything works well. I can play the video, see the 3 views, and switch among the views but no cut edits get put into the multicam sequence as they did in the tutorial video. What do I do to get the cut edits?
After further work sometimes I do get the cut edits and sometimes I do not get them.
The box surrounding the current view starts out as yellow.
If I move the scrub needle to a new position in the timeline and click on another view the new view gets the yellow box but no cut edit line appears at that location.
When I click on Play and as the scrub needle moves along I click on another view, the new view gets a red box around it.
When I stop the video a cut edit line appears where I changed the view.
It seems like I have to make all of my view changes on the fly.
What is the reason for the red and yellow highlight boxes?

If I move the scrub needle to a new position in the timeline and click on another view the new view gets the yellow box but no cut edit line appears at that location : that is correct, that's a way of changing cameras.
When I click on Play and as the scrub needle moves along I click on another view, the new view gets a red box around it. ; that is also correct. every time you click on another camera it is highlighted red and make a cut.
you can edit manually by cutting the clip at the end of a scene with the cut tool and, while the scrub line is still at the cut point; either click the new camera in the multi camera monitor or press the number key on your key board and it will change the camera ahead of the scrub needle.
It seems like I have to make all of my view changes on the fly. I actually recomend editing on the fly and then going back and make the required fine adjustments manually. you may be surprized at how quick that is. I just finished a 3 camera 3 1/2 hour dance show doing that very thing (In CS 6 not CC7). I first watch one entire dance, then play it again making my cuts on the fly, then go back and adjust, maybe adding dissolves etc. It's pretty quick
What is the reason for the red and yellow highlight boxes? the red box indicates which camera angle is being recorded (recorded means the software is remembering the cuts) while playing the timeline and making cuts by selecting different cameras during play. The yellow box indicates which camera WAS recorded and is now "hot" during playback of an edited section.
Be carefull using CC7 it does have some serious bugs in the multi camera feature and can mess you up big time. CS6 is stable, I recomend that you use CS6 if you can, until the fix the CC7 bug ... the following is what I JUST went through today:
Finally experienced the multi camera edit bug I've been hearing about: thinking everything was good after editing for a couple of three days ... got a premiere "error warning" after reopening the project I found the last 183 edits which had been auto saving for 1 hr 20 mins, now all start from the beginning of the original clip or are just black and are not fixable. Each edit is now a small clip of a duration of the distance between edit points, almost like the clips had been pulled out of the preview folder as little rendered clips, except they all contain junk.
The good news is: This is a two act play, the first act in a seperate sequence in the same project is fine. the first 16 mins of act two is fine, the next 20 mins of act 2 is screwed up. Only had another 15 mins to go and I was done. I'm going to see if I can continue. try to save all the audio editing. The screwed up edits at least mark the edit points. I'll move them to a different layer and use them as a guide to my edit discisions. I'll post what happens.
interesting ... tried to do the above ... while in the program monitor it seemed to be working ... after switching to the multi cam monitor it went right back to the "begining of the clip" syndrome. I hope I havn't lost the entire project. I'll try going back to the last "good" saved project
OK. went back to the last good auto saved project (9 saves back) and just continued on from B4 it got messed up ... saving frequently and re-opening the project after every segment. now I'm back to where it all got screwed up. Yay!!! Phew!!! could have been worse I guess. I'll be editing my next project in CS6 for sure. I think CC7 should be recalled. It's just a disaster waiting to happen.

Similar Messages

  • How do I make "destructive edits" in Lightroom like I do in ACR?

    Hey Guys,
    I recently made the switch from editing in Adobe Camera Raw to Lightroom and am disliking some of the workflow. I really enjoyed how in ACR the edits to my photos would save as soon as I hit done. There are many times were I need to close out of my of editing software quickly and don't have time to export everything out of light room. So as the question states, how do I make Lightroom save the changes I make to photos instantaneously without having to export them?
    Thank in advance,
    Matt

    I assume you are using XMP files with Camera Raw. You can do that with Lightroom if you choose the option to write changes to XMP sidecar files in your Lightroom preferences. But if you use a Lightroom with its default setup the adjustments you make are stored immediately in the catalog. You can stop and close Lightroom at any point, and when you return Lightroom will retrieve from the catalog all the adjustments you have made to whatever image you have highlighted in the develop module, or in the library module as far as that goes. I have chosen not to use XMP sidecar files, and rely on my catalog to store all of my Lightroom adjustments. Again, making an adjustment in Lightroom creates a history step in the catalog immediately. There's no need to export in order to keep all of your adjustments.
    Incidentally, regardless of how you set up your workflow, you cannot make "destructive" edits using Lightroom. Your master images always remain unmodified as far as the file contents are concerned.

  • Make a simple "cut" edit in a singular video in CS6 (one video file as opposed to multiple clips).

    I want to be able to do simple editing in CS6. I just spent three hours watching tutorial videos and reading help articles and this forum. I have never used an Adobe video editing program before. I normally use Windows Movie Maker, but it's too simple for my current needs. (Eventually I will learn effects.)
    My problem is that the tutorial videos show examples where there is more than one "clip" being placed on the timeline. That seems to pre-set editing points. I only need to import one longer video file and then cut out frames that I no longer want in the video.
    I have figured out how to set start and end points on the clip, as in at the actual beginning and actual end. But following every single method described (JKL, etc), I still cannot seem to edit frames out of the middle of my videos. I assume this is because I'm missing some very simple method for setting edit points. This is what I need to know.
    I am an extreme novice with this program though I'm somewhat computer savvy. So please no jargon. I know nothing of this program. I did all I could to find my own answers before asking here, but if this is answered somewhere else, please direct me there. Thanks.

    I'm in a similar boat -- editing family video recorded on Hi8 and captured into DV with a Canopus ADVC-300. I typically have a 2 hour clip in the timeline.  I'm separating these into clips with the razor tool, but sometimes I want to remove a garbled few seconds from within a clip.
    Today I discovered something nifty: in Keyboard options, there are two items that don't have a key assigned:
    Application->Ripple Delete->Ripple Trim Next Edit to Playhead
    Application->Ripple Delete->Ripple Trim Previous Edit to Playhead
    I assigned these to the Shift+] and Shift+[ keys.   Premiere didn't warn me about these keys being assigned already, so I guess it's ok.  At first, I used '}' and '{' but I'm afraid that it is too easy to accidently hit them.
    When I play back in the timeline, at the start of the garbled area I want to remove, I hit Ctrl+K to add an edit point (the "out point", I suppose). Then I continue playing.   When I reach where I want the video to resume, I just press Shift+[ and Premiere ripple-deletes to the edit point.
    This does leave me with an edit point, though.  I have yet to figure out how to splice the two clips together again.
    I'm sure the pros won't like this, but I find it makes things easier.

  • How can I bring a file from a folder on my desktop to this program and make it editable. Like deleti

    How can I bring a file from a folder on my desk top int this program and make it editable., in order to replace words or remove words or texts..?  jn

    Hi,
    FormsCentral cannot be used to edit existing PDF documents. That functionality is available in Adobe Acrobat:
    http://www.adobe.com/products/acrobat.html
    Regards,
    Brian

  • [SOLVED]Cannot copy/cut/paste files in Konqueror

    Hi all, I am using KDE4.1.2 (official version). My konqueror cannot copy/cut/paste files in 'file manager' mode, the copy/cut/paste items in the right click menu are always faded out, and C-x/C-c/C-v hotkeys do not work either. However, it can read/write/rename/delete files normally. In fact, 'Move to' and 'Copy to' menu works too. Meanwhile, dolphin does not have this problem. I am a little confused.:mad:
    Last edited by hk2717 (2008-10-08 01:35:56)

    Hello,
    I'm using kdemod, konqueror 4.1.4 in i686, and the paste is always greyed out (same happens with the button in the taskbar). The "copy" action seems to be enabled through ctrl-c and the right-click, but there is no way to say, because no paste can be done. Deleting files works, so it does not seem to be related to permissions.
    Regarding the post
    http://bbs.archlinux.org/viewtopic.php?id=57749
    I installed konq-plugins, but it did not help. The paste is also greyed out in dolphin.
    I wonder if anyone is having this same issue? I thought this was solved in 4.1.3
    Thanks!
    Eduardo

  • E61: sip problem with Gizmo, cannot make call

    I register for Gizmo few days ago. I cannot make any call out (to 411, 1-747xxx numbers, any landline, any mobile )
    I cannot hear the other side, but the other side hears my voice
    what's wrong?
    I'm using the latest v3 firmware

    I have some problems with Gizmo as well. Not exactly the same problem as yours. In my case, initiating a call takes too long (~1 minute). I would recommend trying Truphone. It is another SIP-based app; and in my opinion, much better than Gizmo.
    You can also check my blog posting here, http://www.s60tips.com/2007/06/28/which-voip-applications-to-use-part-v/Message Edited by antonypranata on 05-Sep-200709:22 AM
    Antony Pranata
    Visit S60Tips.com for tips, tricks and tutorials of using S60 phones

  • I cannot make the unread message indicator go away on my 5S.  My phone shows 3 unread messages when in fact there are zero unread.  Help please

    My 5S shows that I have three unread text messages.  However, I do not. I have checked everything I know to check and cannot make the little red 3 go away.  Any ideas?  This is super annoying.

    While the action you describe is not normal for the iPhone, is this the only time that it has occurred or has it happened again? There are the normal user trobleshooting procedures that you can follow, power off/on, reset, restore, however, if it has not happened again, it sounds like an isolated incident that has not been duplicated.
    Also, do you have a passcode lock on the phone to prevent others from accessing your data?
    Message was edited by: ChrisJ4203

  • Sharepoint 2010 - Cannot make field Required in Add New Item form.

    I made a fleld Required by making the proper selection in List Settings > Editing the column.  It now shows as required when I edit an existing record in the list, but is not required when adding a new item.  Why does the setting not apply
    to the Add New Item form?  How can I make it apply/required?
    btw, there are no content types associated with the list.

    Hi  ,
    According to your description, my understanding is that you cannot make field required in the list new form.
    For my test, I created a custom list , added a non-required field and added some records. Then I made the field required. But it worked fine as expected both in existing records and  in Add New Item
    form.
    Do you have some customization in your list new form?
    You can go to your list -> Customize Form under  list tab, then the new form will be opened in the InfoPath. In the InfoPath, right click the field and select Text Box Properties, make sure “Cannot
    be blank”  has been checked.
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • CANNOT OPEN OR EDIT PHOTOS SINCE INSTALLING iLIFE 08 and OS 10.5

    I have recently installed iLIFE 08 and OS 10.5.1 and I cannot open or edit or use any of the photos in iPhoto. I get a white circle with an exclamation point in the center each time I try open open a photo.
    I did back up iPhoto before installing the new software. Should I reinstall from the back up or is there another fix for this problem. Thank you in advance for the help.

    Welcome to the Apple Discussions. I believe that's an indication of a permissions issue. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the option to repair permissions.
    If that doesn't fix it download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner section and the current group in the group section. You can either type in the path to the folder or just drag the folder into that field.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Cannot Make changes directly to table's field data

    I need to make changes to table e.g ekko but when I enter table, the change option is in display mode and I cannot make direct changes to the table. I need to update some data in a field. I checked other tables as well, but all have change option as display.
    Is there any settings required to get the table in change mode?

    >
    Sankaran M wrote:
    > Hi,
    >
    >    It is just modification of table directly through program and SM30 but must be very very very careful.
    > You cannot modify standard SAP table directly but you can generate the table maintenance view to modify it.
    >
    > 1)       Use SE11 to generate the view of the table. It will prompt you to generate what type of view. Select Maintenance
    >
    > 2)       At Menu tab u201CUtilitiesu201D, select Table Maintenance Generator. It will bring you to another screen for dialog maintenance. You must select fill-in functional group and authorization group for authorization control in the user profile if you want.
    >
    > 3)       After this, you can use SM30 to maintain the table directly or create a Tcode for user to maintain it.
    >
    > Regards,
    > Sankar
    I dont understand what to do in point 1, how to generate view of table, can you make it little easier to follow. I tried database table i.e. ekko and when I click change it asks access key, which I dont have as I guess I have to get it from SAP..
    Edited by: Afshad Irani on Aug 17, 2010 12:30 PM

  • In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    In iTunes under my device, under the apps tab, Why are all the options shaded out?  I cannot make any changes, select any apps or do anything with the apps.  I was able to load a few apps and sync but cannot sync anymore to my phone.

    Hi,
    ( I search for iChat questions when I have finished in the iChat Forum)
    So the menu bar reads iChat, File,  Edit,  View, Buddies, Video, Window and Help
    There is no Buddy List open.
    There is no other window for iChat open.
    In the iChat Menu you only have access to Status.
    Is an item ticked in the list ?
    Is this a green (Available item) or  Red ( an Away one) ?
    Can you access the Accounts option ?  (Sitll in the iChat Menu)
    Is anything in here ticked ?
    In the Window menu any Logged in account should appear in the list  (Between the Next Chat and File Transfer items)
    It would be useful to know which version of iChat this is.
    If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
    As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option  (you can use it in earlier OS versions if you want)
    Type in:-
    ~/Library/Preferences
    Find the file called com.apple.ichat.plist
    Drag it to the Trash and Restart iChat.
    This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
    9:23 PM      Saturday; August 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I cannot make the "Tones" tab appear into my iTunes even if I go to Preferences and click the "Tones" button. What do I do?

    I just recently bought the iPhone 5 and updated to the newest version of iTunes and I cannot make the ring"tones" tab appear. I even went to preferences and clicked on the "tones" button so that the "tones" tab would appear, and it won't appear. I reset the computer and everything. If someone could please tell me how to make the "tones" tab actually appear, that would be wonderful.
    Thank you!

    Hi Friend,
    In iTunes,
    Click Edit --> Preferences --> General Icon Ensure that
    Ringtones is checked.  If not, check it then click OK…
    Hope it will be helpful

  • I have the doc on my screen as an adobe  but I cannot make changes?  The browser does not locate it?

    I have the doc on my screen as an adobe  but I cannot make changes?  The browser does not locate it?

    Hi,
    Are you opening a PDF file in browser and trying to edit the PDF file there?
    Please let me know in more details.
    In general most PDF files cannot be edited in browser and some PDF can be edited with the permission for editing in browsers.
    Thank you.
    Hisami

  • I recently installed CS4, and I can not make a connection to my website.  Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

    I recently installed CS4, and I can not make a connection to my website.  Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

    Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
    On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
    To open Windows Firewall
    1.
    Click Start and then click Control Panel.
    2.
    In the control panel, click Windows Security Center.
    3.
    Click Windows Firewall.
    Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
    On the Exceptions tab, click Add                     Program.
    In the list of programs, click the name of the program (Dreamweaver) that you                     want to add, and then click OK. If the name of your program is                     not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
    Hope this helps - Joe
    Joseph Lowery
    Author, Dreamweaver CS4 Bible

  • HT201659 I cannot make a purchase an app even know I have credit on account and it will not let me remove old debit card information

    I cannot make a purchase an app even know I have credit on account and it will not let me remove old debit card information

    Hi Lukeclear17,
    The article linked below details both why you may be unable to make a purchase using the credit on your account and why you may be unable to choose "None" when editing your billing information.
    Why can’t I select None when I edit my Apple ID payment information?
    https://support.apple.com/en-us/HT203905
    Cheers,
    Allen

Maybe you are looking for