CC Multicam help- Clips are being rearranged/ replaced with repeated clips

I have a 35 minute multicam sequence set up, synched by audio. It contains about 12 overlapping video clips from two cameras. I was working on the project but then when I opened it the next day the multicam clips had been rearranged. In a couple of places, clips have been replaced by the first 1/2 clips so that the introduction is randomly repeated.
The clips which have remained in the correct place in the sequence have been shuffled so that where previously an edit switched to an active slot, now a blank space is recorded while the clip plays in another slot.
Is there any way to re-shuffle them back into the right places? Otherwise, I don't know whether to bother re-doing the edits in case it does this again, or if I should just give up and edit them the long-winded way on different video tracks.
Thank you.

Thanks, this sounds like the same problem. I suppose I'll have to reinstall CS6 until the patch is released

Similar Messages

  • Withholding tax lines are being cleared along with other line items

    Hi All,
    While doing J1INCHLN(payment making of TDS), system giving error i.e.
    "Withholding tax lines are being aleared along with other line items"
    Please suggest me in this issue...it would be great help for me.
    Thanks,
    Saisri

    Hi,
    As per my analysis we found some documents, here We have made advance payment to vendors with TDS and again rised invoce to vendors with TDS and these documents have been nockedoff in F-54.
    We have many documents of such nature and as per me it is because of these documents  the system is throwing error. Pls. advice as to how to proceed on this.
    Thanks,
    Saisri

  • Teachers sharing one dot mac with iWeb need help- sites are being lost

    Sorry to be lengthy- Here's the question and issue first and then the background.
    Question/Issue: Anyone know a way we can have multiple people (eventually 20 or so) with their own computers creating sites in iWeb and publishing them to a common dot mac account without wiping each other out?
    Background:I am a teacher and at our school we have a single dot mac account. A few of us have been using iWeb (2 on iWeb 08 and 1 on iWeb 06) and posting our sites to dot mac with no problems. The iWeb 06 sites went to a folder under Web> Sites>iWeb in our dot-mac's iDisk; the iWeb 08 sites were directly under the Web>Sites folder. When sites were uploaded from different computers there was no problem (they all had unique names) and it worked great until this week.Even the 2 users both on iWeb 08 could send their sites to the iDisk and nothing would be deleted, just more site folders were added.
    We are now all on iWeb 08 and so nothing goes into the folder on the dot-mac's iDisk under iWeb, they all go as unique sites- no problem I thought.
    Our problem is now that when any one of us update our sites, it wipes out everyone else's site (since their site isn't on our computer). It didn't used to be that way 2 weeks ago !!! Could this be something new with the migration to mobile me (if it is, this really ***** for us)
    I know a solution is to publish the sites to folders and then drag to the dot mac in sub-folders under Web>Sites instead of publish and each of us can have our own folder, but its a pain and not all of the teachers will be able to do this.
    I think there is a feature in iWeb06 called personal domains, but I think we can only have 2, so not sure if this will help.
    Does anyone know a way to set the defaults in the domain.sites2 file or in iWeb so it will use a sub-folder when loading up to dot mac? This way each of us can have our settings different and it will load for us automatically on the iDisk.
    Does anyone know why this used to work and now it doesn't?
    Any other ideas- Help Please

    From my own experience.
    When you publish to dotMac the index.html file in the root redirects to the top Site in the list of the iWeb domain file.
    I use ca. 40 Sites in some 30 domain files. And most are customized after publishing. Plus a lot more irregular stuff.
    iWeb remembers what Site in which domain was published last.
    When I choose a different domain file, iWeb will create a new index.html file to redirect to the "new" Site.
    As far as I could determine, none of the either published Sites are deleted. If iWeb did delete previous published Sites I would not change domain files.
    In your case the following will happen. Every student publishes his/her Site(s). The last one published will be the default Site.
    As long as no-one changes his/her Sitename or add a new Site at the top of the list, the default Site last published will be that.
    Make sure everybody's Sitename is unique.
    I use a custom index.html file in the root. So I have to pay attention that when I publish a new site, the custom index.html page is overwritten. I keep a copy of that index.html file in the root. I can replace the index.html file in case of emergency.
    Does anyone know a way to set the defaults in the domain.sites2 file or in iWeb so it will use a sub-folder when loading up to dot mac? This way each of us can have our settings different and it will load for us automatically on the iDisk.
    Don't look for hidden settings. If it was possible, it would be visible in the preferences. Accept the way iWeb/dotMac does its job. It wasn't designed to be used by multiple users with multiple computers and only one account. That should give you a hint.
    All other problems are purely organizational. Personally I wouldn't trust multiple persons on one account. Give them their own account. If they mess up things they are responsible. Or find another solution.

  • Pics are being 'auto replaced' when aperture is open

    Hi people
    I have an incredibly frustrating problem in that as I view pics in folders, the system starts to replace the pics with photos from other folders....I fear that I have lost a lot of photos to this problem....don't know why this happens and whether my old pics have been destroyed....firstly, need to know how to stop it and secondly how to recover the originals.......HELP!!!!!
    I have not yet upgraded to Aperture 3
    Thanks
    Alex
    IMAC Mac OS X (10.6.4)

    Here is my sad story:
    1. All my iBooks suddenly disappeared on my iPad Air this morning.
    2. I went into Settings>iBooks on my iPad and tapped on Show All Purchases
    3. My iBooks reappeared, but only in the Cloud. This is useless to me. I travel a lot and read on trains and in the car.
    4. I synched my iPad with iTunes on my iMac to see if that would help.
    5. My books are still there, but they are still only in the Cloud. How do I download them so that they are permanently resident on my iPad?
    6. Help, please!!!!!
    AC

  • HT4859 I shared itunes account with my daughter, had never synced my phone with computer, synced with computer and chose daughter's phone instead of create new phone, all phone contacts are now gone replaced with daughter's - is there no way to get contac

    I shared itunes account with daughter's phone, never synced my phone with home computer through itunes, synced tonight with itunes but choose her iphone and it restored all her info on my phone, all my phone contacts, text messages and photos are gone  - I had auto backup to icloud daily - is there any way to get phone numbers and texts back off icloud?

    If you have been backing up to iCloud your camera roll photos, text messages and other data and setting should be contained in the backup.  Restoring the backup to the phone should recover them.
    To do this, go to Settings>General>Reset, tap Erase All Content and Settings (which will erase the phone), then go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup and follow the prompts.  Be sure your phone is connected to wifi and your charger as this may take some time to finish.

  • I was trying to set up my aunt's iphone 3gs with itunes but accidently backed up her phone with my phone information so now all her contacts, photos, and notes are all gone and replaced with my phone information. Is there anyway I can restore it back?

    I was trying to help my aunt set up her phone to itunes on my computer but when it asked me whether I wanted to set it as new device or use the backup from previous iphone data, I clicked restore from backup. I didn't realize that clicking that option would delete all of her information on the phone and relace it with mine. Her contacts, phones, notes, and all of her information are gone and replaced with mine just like my phone. Is there any way I can restore her phone because she really needs all those information orignally stored on her phone? She just got her phone not long ago and didn't backed up any of her information on her phone.

    If her data was not backed up or synced to something, it's gone. Sorry.

  • HELP: Files and Applications are being deleted of my mac

    Hi guys,
    So yesterday I was listening to music in iTunes and suddenly all thee songs, bar 17, had an exclamation mark next to them. I went to folder to locate them and every single file had gone. The folders were there but no .mp3. Then a whole load of my software disappeared too.
    I ran disk utility and there were so block errors so I ran disk recovery and repaired it, which worked fine. The files didn't return but the disk utility came back OK.
    I kept an eye on the amount of storage being used and it started to decrease. So I've turned the MacBook off but I'm not sure what to do. I need to use my laptop but don't want to lose everything.
    I'm assuming it is malware of some kind that is going through and remotely deleting all of my files. Please can someone help me, this is a disaster.
    I'm running a 1TB, 8gb, MacBook Pro mid-2012 (one of the last ones to be sold before full replacement with retina). It is just over a year old and has never been dropped.
    Thank you.

    The startup drive is failing, or there is some other internal hardware fault.
    Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • When I drag an image over a clip to try and get picture in picture the options it gives me are only insert replace and delete not the picture in picture option how do i get the picture in picture option when i drag a picture over a clip

    When I drag an image over a clip to try and get picture in picture the options it gives me are only insert replace and delete not the picture in picture option how do i get the picture in picture option when i drag a picture over a clip?

    Go to this. http://help.apple.com/imovie/mac/10.0/#mova1aaa682b . It is the link to show you how to use picture in picture. I had this same problem not too long ago.

  • Can you see which timeline clips are being used in Media Browser?

    I'm a relatively new user and may not be familiar enough with cs5.5 but
    is there a way to see what clips are being used on the editing timeline in the media browser.
    I open premiere pro - Project is loaded. I edit the scene until it is finished.
    When I look over at the media browser, all my raw clips (some of which I'm
    using on the editing timeline) look the same - I can't tell which ones I using on the timeline.
    The reason I ask - when I fiinish editing a scene it would be nice to glance over at the
    media brower folder where my raw clips are located - easily see which ones I'm using because they
    are highlighted or checked and then delete the ones I no longer need.
    Is there a way to do this now?
    Thanks
    Jeff

    I dont think so  but a better way is to look in the top of the Project Window and there is a drop down that will show you all the useage instances of the clip.  You can click on them to go to them in the timeline.

  • Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking

    Is there any way of exporting a clip (example 1 hour) into 4 seperate 15 min clips at the same time? Or does anyone have any ideas along the same lines to save time? Add my skype baconhousevidz if you can help or are unsure of what im asking
    thanks everyone

    BaconHouseVidz wrote:
    … at the same time…
    in hope to speed things up?
    no, no effect.

  • Neither my ipad or ipod are being recognized by itunes so i can't transfer songs from itunes playlists to the two devices. this is new, as far as a week ago i transferred music from the computer to the ipod. can anyone help?

    neither my ipad or ipod are being recognized by itunes so i can't transfer songs from itunes playlists to the two devices. this is new, as far as a week ago i transferred music from the computer to the ipod. can anyone help?

    Hey lightc,
    If you are having an issue with iTunes not recognizing your iPad and iPod on your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • TradeMark Symbol and Registered Symbol are being replaced by question marks

    Hello Everyone,
    I am using RTF template to generate report in PDF, otherwise "Trademark and Registered" symbols from the field data are being replace by "question marks".
    Any suggestions please.
    Regards
    Charan

    Hi Tim,
    I followed the steps to map external font from this link
    http://www.oracle.com/technology/products/xml-publisher/demoshelf/shelf.html
    Actually, i am not able to find the font name for these kind of symbols (like trade mark or Registered) and also, i am fetching the data from database and them printing on PDF (like a standard process). This trademark symbol is in database.
    Regards
    Charan

  • Some albums are being listed before compilations instead of alphabetical order. Please help

    I have a few albums that are being listed after 'Z' alphabetically and before the compilation section rather than being listed alphabetically. Is there any way to fix this? I like to have my albums listed alphabetically and not scattered to the bottom. I have attached a picture that shows this problem (It starts with Josh Groban and goes to the Miley Cyrus song). Any help would be great! Thanks!

    Bumping for help

  • Exactly what IPod's are being received as replacement for the recalled 1st generation

    Exactly what IPod's are being received as replacements for the recalled 1st generation one's

    6th Generation Silver Nano 8GB

Maybe you are looking for