CC not visible in RWB-Communication channel monitoring

Hi All,
Communication channel created in the directory is not visible in
Communication channel monitoring of RWB. I refresh ABAP cache, SXI_CACHE,
CPA cache. Still its not visible. Deleted and created again. Still no use.
None of the communication channels newly created are visible in RWB. Could anyone suggest some ideas to resolve this issue.
Thanks
Ricky

Hi
Just to be sure a basic question to start with : You do activate your channels in the ID after creation ?
Dirk

Similar Messages

Process not visible in the Communication Channel Monitor

Hi there
I have a scenario where I create multiple text files with my message mapping. First I created the scenario with a single file and tested it. It worked so then I changed the Interface Determination to Enhanced and the necessary occurrences to unbounded in my IM and MM. Now if I execute the scenario it shows a successful status in the SXMB_MONI but does not create the flat file. If I go to my Communication Channel Monitor it does not show it there so it did not reach it. Is there some other ting I needed to change for this multiple file scenario?
Thanks,
Jan

Hi again
I sorted out the issue but now I'm getting something weird. In my source Message Mapping I have:
Destination
--Name (0-Unbounded)
Payload
--Details (0-Unbounded)
And my Target mapping I have
Main_Structure (0-Unbounded)
--FileDetails (0-1)
So the Destination determines the number of files and the payload goes to the File Details.
This does not work for some reason but if I change my mapping to a fixed number of files it works. For example: If I create a UDF that creates 2 arrays and map it to my Main_Structure it creates 2 files but it I map my Destination node with X amount of lines to my Main_Structure It shows fine in SXMB but does not show at all in the component monitor for the receiver CC and in my message monitor it shows "On Hold"

Not able to open Communication Channel Monitoring

Hello All,
    I am not able to open communication Channel Monitoring in Runtime workbench under Component Monitoring. When i am click on Communication Channel Monitoring button following error was thrown. Can anybody suggest me, How to resolve this problem.
java.lang.NullPointerException
     at com.sapportals.htmlb.table.TableView.getColumns(TableView.java:332)
     at com.sapportals.htmlb.table.TableView.getColumn(TableView.java:350)
     at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setTableSortingStuff(ChannelListTableView.java:556)
     at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setSingleSelectTable(ChannelListTableView.java:393)
     at jsp_channelmonitoring1213186378553._jspService(jsp_channelmonitoring1213186378553.java:257)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thanks&Regards,
VenkatK.

Hi,
The error could be because
1) The URL referenced from RWB (Communictaion Channel) is incorrect.
        Try accesing the link directly http://HOST:JAVAPORT/mdt/channelmonitorservlet
If you are able to open the window with out nay error, it means you url referenced from SLD is wrong. Correct your SLD and update the cache.
2) If you are not able to access above URL, it means the java service is not running to accept your request, check in visual admin if any of the services are stopped. Try restarting the same.
Regards,
KNS Kumar

Issue with RWB Communication Channel Monitoring

Hi All,
I am getting a error in RWB >> Communication Channel Monitoring.
I deactivated the receiver JDBC adapter, and now when I activate it, in the RWB it shows 'Channel started but Inactive' I tried to start and stop the channel and also activating and deactivating the channel. But no success, it keeps showing 'Channel started but Inactive'. Pls advice....
XIer

Hi XIer,
Ideally adapter status should be in green when it is up and running..
if it not then..
1. check the status in ID. It should be in active state.
2. check the status in RWB .It should be in green. I not check that your adapter got activated without any cache error.
3. Do a CPA Cache Refresh.

Getting the Error at RWB Communication Channel Monitoring

Hi,
I'm getting the following error message in the RWB - Commincation channel monitoring level. I have used teh Module configuration
for doing Asynchronous to Synchronous bridge ( File to RFC to File ) . For this I have used the following modules in my sender File adapter - 1 .AF_Modules/RequestResponseBean , 2. CallSapAdapter ,3. AF_Modules/ResponseOnewayBean.
My PI version is PI 7.0 (EHP 1 ,Service pack 5) This version will suport the bellow module configuration .. or not...?
I had done the scenario by folowing the same wiki .
http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without+BPM)
But I'm getting the following Error messages
Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
Received XI System Error. ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task. ErrorStack:
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task..
Transmitting the message using connection http://TDX01SMX:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
The message status set to FAIL.
Please suggest me any corrections.
Regards
Jain

Hi,
My communication channel was not stopped. and when ever I'm keeping a file in the source directory ,my sender communication channel becomming Red Led. and it was showing the Error status at RWB. If I removed the Module configuration that is working fine (for normal asynchronous process) But I need to get teh response message back to the Legacy file systems .
I'm sure that Module configuration only creating an Issue at this scenario.
My Version is PI 7.0 ( EHP- 1 with latest service pack 5). Please suggets me the corrective action need to be taken.
Regards
Jain

Comm channel not available in RWB comm channel monitoring

Hi All,
I've gone through this(Comm channel missing in comm channel monitoring) unanwered forum. I've facing the same issue.
In my ID, I created XI receiver adapter comm. channel. And data is flowing successfully to the receiver side through this Comm. channel
I'm aware that XI adapter in ID is used to send data via Proxy.
But why i'm not see that in the Comm. channel monitoring in RWB. If anyone has documentation please let me know.
Thanks.

Hi ,
The XI adapter resides in Integration engine thus you cannot see it in RWB. RWB shows comm channels which are in adapter engine. The simple proof is that you cannot enhance this adapter with your own modules on the Module tab page in the module processor. Here is the link to documentation
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
regards
Anupam

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Comm Channels are not seen in the Communication Channel Monitoring in RWB

Hello All,
I am facing a strange Problem. In the RWB i am not able to see the Comm Channels that i have configured in the Integration Directory. In the Adapter Monitoring also I am not able to see the Adapters with Green Status.
I am on PI 7.0 and SP9. For a simple IDOC to File Scenario, the IDOC is getting sent but the File is not getting written. I have to monitor it for this. As the Comm Channels are not showing so I am not able to Montitor.
Can anyone please suggest me how to do this montoring and how can I see the Comm Channels that I have created.
Thanks in Anticipation
Best Regards
Chakra and Somnath

Hi,
1. Check created the Busieness system to identify your XI System.
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
2. In XI Tcode : SXMB_ADM
Role of Business system : Integration Server
Pipleline : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Go to SXMB_ADM
Execute Integration Engine and Configuration
Click on Check button check the SLD working fine or not.
Regards,
Venu.

IDoc adapters not in "communication channel monitoring"?

Hi,
I've modified some information that the receiver IDoc adapter is using (the logical system ID). But after I refreshed all the caches the change is not updated when I send an IDoc to R/3.
When this kind of problem happens with RFC adapter you just have to stop and restart the communication channel in communication channel monitoring. But IDoc adapter is not here... so, how can I restart the IDoc communication channel?

Hi,
IDoc adapter doesnt reside on Adapter Engine, its part of ABAP stack, because of this you cannt find it in RWB-Communication channel monitoring...
Try refreshing the cache:
Transaction: sxi_cache
CPACache refresh using the below url:
http://<server:port>/CPACache/refresh?mode = full
to get the changes affected.
Regards,
Sreenivas.

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

Communication channel monitoring, adapter monitoring error

Hi ,
I am using SAP PI 7.0 with HP-UX.
Here we have 6 logical hosts in one physical host.
Physical host name is u2013 xyz
Integration server name u2013 sappid
The Central SLD: sappid
URL for sappid: sappid: 50300
When I monitoring RWB----
>communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 ) and getting page cannot find error.
1.SLDCHECK
   http://xyz:50300/sld
   host name: xyz
port number: 50300
user : SLDDSUSER
2.SXMB_IFR
   http://xyz:50300/rep/start/index.jsp
3.SMICM
   icm/server_port_0 = PROT=HTTP,PORT=8003
   icm/server_port_1 = PROT=SMTP,PORT=0
   icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
   icm/host_name_full = sappid
4. SLDAPICUST
    SAP_CONFIG   1   xyz   50300   SLDDSUSER
5. SXMB_ADMIN
    Role of Business System Integration Server
    Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
   Integration Engine Configuration Data -> Check button
6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
XI start page.
    when I opened the http://sappid.AIG.com:50300/
   the page not found issue, when I opened http://sappid:50300/ I got the
   XI start page.
plz help me for this issue.
thanks in advance.
regards,
reddy.

Hello,
I think the FQDN is not set properly.
Problem in the parameter
SMICM
icm/server_port_0 = PROT=HTTP,PORT=8003
icm/server_port_1 = PROT=SMTP,PORT=0
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
*icm/host_name_full = sappid *
Replace this parameter in instance profile
icm/host_name_full = sappid.AIG.com
Then in the host entry of your server please add an entry
172.18.23.233(ip your ur Xi server)       sappid.AIG.com
Then let us know the result.
Thanks and Regards
Vijay

Sender Communication Channel Monitoring Error

Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AM

Hi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful

Communication channel not visible in RWB

Hello everyone,
I am not able to view the communication channel in RWB. This is a HTTP sender . i have imported it but still it is not visible in RWB. what could be the reason ?
Regards,
Ravi

Hi Ravi,
In PI there are basically two types of adapter, adapter engine based and Integration engine based. Integration engine based adapters are HTTP, XI and IDOC. These adapters can be monitored from ABAP stack means from SXI_MONITOR and adapter engine based can be monitored from RWB. Due to this differentiation you HTTP adatper is not visitble in RWB. But you can monitor it from ABAP stack.
Edited by: Rajhans Abhay on Jan 18, 2012 6:06 AM

Channels not monitorable in the Communication Channel Monitor / RWB

Hi,
Back on XI after a long break ☺
I am facing an issue with our in-house JCA adapter used in XI scenarios. When trying to monitor the channels using our adapter from the Communication Channel Monitor in RWB, I have the following:
Status: NA
Short Log: No adapter registered for this channel
The adapter is deployed and the integration scenarios using it work perfectly:
- sda package deployed through the SDM
- the metadata defined in the Design
- a valid and working configuration involving the scenario is defined
The messages are going through and are monitorable in both SXMB_MONI and RWB...
All other channels using system adapters (File, RFC, SOAP) do display a status (as a color icon) and a Short Log and they can be administered (start/stop) using the enabled buttons when selected
From the Adapter Monitor page, our adapter has a green status, and all the channels configured to use it display the status, Name and Text information...
I have no idea what could be the issue should the adapter implement a special interface to be monitored from the RWB, is it a configuration issue, permissions issue???
I saw 2 posts with this error message but they did not help me to figure out where the issue is
Thanks for your help,
Adalbert
Edited by: Adalbert Wysocki on Apr 29, 2008 6:52 AM

Hi Gouri,
Thanks for your response, I will try would suggestion for testing... but
I am wondering why the namespace has to be http://sap.com/xi/XI/sample ???
It sounds weird that this namespace has to be fixed... as the purpose of a namespace is to create a isolation/container for names... so it needs to be customizable...
I did not see anything in the Adapter Development guides related to this kind of constraints...
Thanks,
Adalbert

Communication channel monitoring is not working

hi all,
in RWB when i click on COMMUNICATION channel monitoring it is throwing the error like 'request resource is not available'.
how can i resolve this..
regards,
KRUSHI

Hi
Try opening directly
tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
http://<host>:<port>/mdt/channelmonitorservlet
You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
also refer
No "Adapter monitoring" in runtime workbench

CC not visible in RWB-Communication channel monitoring

Similar Messages

Maybe you are looking for