CC Package to IDML fails print-to-booklet in CS6

I work in a school that has yet to upgrade to CC.
I routinely work with student files that are built in CC. I process in previous version transitions has been to Package the file, and use an IDML file to jump between version.
This time we are seeing two issues:
CC ID files that have been packaged, always fail when you try to use print to booklet. We receive the "This document uses multiple pages sizes" warning, even though by all tests and estimations on my part, the layout is consistent and all pages are the same size. Resetting these values does nothing. Unfortunately the print to booklet process is important to us for a variety of reasons specific to our setup.
The other annoying issue I've not been able to figure out regards CC subscription fonts - How can these be included in the packaging process? The student receives a warning about font licences, but the fonts themselves never appear in the package folder.
Anyone else have these issues and found a way around them?

@Bob – there were reports that this issue – "This document uses multiple pages sizes" – will be with CS6 as well.
From the German language hilfdirselbst.ch :
»das aktive Format verwendet verschiedene Seitenformate« Broschürendruck nicht möglich - Adobe InDesign - HilfDirSelbst…
The reports are showing, that the bug was resolved with InDesign CC.
But there is good news here:
I tested one of the critical documents, made with CS6 v8.0.1 in the latest CS6 v8.1.0 version.
And it worked! I could print to booklet with it.
At least I did a PostScript file and successfully distilled to PDF using ADPDF9.PPD (Adobe PDF 9.0).
I'm on OSX 10.7.5 with InDesign CS6 v8.1.0.
Uwe

Similar Messages

Can't print InDesign Booklet - "fierycup filter failed" warning

THE CULPRITS: OSX 10.6.6, Xerox 7700 WorkCentre and InDesign CS4
THE PROBLEM: Last week I was able to print a booklet duplexed fine. I have not done ANY updates since then but it won't print now. I get this message: "Error: /Library/Printers/Xerox/Filters/fierycupsfilter failed"
I'VE TRIED:
copy and pasting into a new doc
resaving and renaming doc
removing all the images
packaging and renaming
installing new driver
deleting and re-adding printer from printer list
printing from Adobe Acrobat
restarting InDesign
swearing alot
None of this has worked. Help?

Great news! I have been suffering through this same issue. I had a document that printed Friday...but the same document got the error mentioned above "Library/Printers/Xerox/Filters/fierycupsfilter failed". I was able to print other documents, but not this one. I went into the font menu to see what I had used and substittuted to fonts that were not being used. The document worked!
I hope this helps....because a font can ruin the RIP of a job....(wow...like the chinese characters).

Adobe Creative Cloud Packager for macintosh fails

Adobe Creative Cloud Packager for macintosh fails.
The error log says "[ERROR] AdobePackageBuilder - AdobePackageBuilder : SendPacket returned error : -1".
I tried 4-5 times.
Everything is downloaded (took about 14 Gb).
I now have only 12Gb free space on my disk. Can that be the reason (will the packager need to make a copy of the downloaded stuff?).
When I am done, how do I reclaim the space eaten by the packager?
Seems like it is caching it at ~/Library/Application Support/Adobe/CCP, but will I manually have to delete that cache?
I cannot find a menu entrance for doing so.
Would be nice if the packager could use a mounted network disk as destination, but it seems not to discover these.
/Peter Andersen

Wanted to join in and say this has been happening to me too. I wiped every adobe file I could find, and used the cleaner too. Started over from scratch in a brand new user account.
It's been about 7 days and I cannot get CCP to actually build a package. I've gotten a variety of messages but everything single time something fails. The new thing is that it says it fails on individual applications. So I disable them, and the error jumps to a new app. I can see that the .dmg's are fine and intact in ~/Library/Application Support/Adobe/CCP/
Given the amount of time this has cost me I really wish I had purchased CS6 Master Collection for every workstation. From my perspective, Creative Cloud has been nothing more then a giant waste of time and effort. It's genuinely bad product from an IT management perspective. Why push off the job of building and installer onto the customer? I should just be able to download the full Master Collection dmg, and then turn on and off the apps I want. Instead I am stuck with a workstation down, and everyone using CC trials to work.

I am trying to print a booklet. I have printed it several times without issue. Now when I print, it gives me one blank page or else 2 out of my 8 pages?

I am trying to print a booklet. I have printed it several times with no issues. Now when I try to print it (with no changes in the program) it will either give me a blank page or will print one of my pages (there are 8 pages total). Any help?

No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

How can I print a booklet where each pdf page is vertically placed on each half page instead of one pdf on each booklet page?

I've printed a booklet before but each pdf page had two powerpoint slides on each pdf file. This binder has one powerpoint slide on each pdf page and if I try to print it as a binder, each pdf page takes up the whole half-page on the booklet. I want to print two pdf slides on each page of the booklet so when I open the booklet, there are four powerpoint slides printed. So I basically want to combine the ability to print multiple slides per page but in a booklet form.

Why not reconstruct the pages in InDesign they way you want the double pages to appear. There may even be an imposition script available that will do the trick. You could then output to pdf all the pages you want the full spread on. Leave the original to create the pages you wanted left as is.
You can ask in the ID forum about an imposition script. I know there was one with CS4, there may have been one with CS3.

How to print a booklet in A5 hor sheet format?

Hi everybody,
from a couple of days I'm trying to print a booklet onto a A5 sheet's format. Each sheet should display 2 columns. The personal setting are 13 mm margin all around the sheet and 26 mm between the 2 columns.
When I'm trying to print, personal setting are not respected and the Reader prints with its own margin's setting which I cannot modify as i need. All this cause that the print area turns to an A6 format.
Default margin of the software are 25 mm all around the sheet and I don't findo no optiono to modifay them.
Someone can help me? Thanks!
Bo.

hi
u can use
<b>FORMAT INTENSIFIED ON.</b>
regards
ravish
reward if useful

How can I print a booklet without a white outline around the border?

How can I print a booklet without a white outline around the border? I'd like the front page to be covered entirely.

You either need a borderless printer, or you have to print on oversize paper and trim off the bleed.

Two-sided printing and booklets (HP D2360)

I am trying to do two-sided printing and booklets with an HP DeskJet D2360 printer. I installed on my MacBook the software I downloaded from hp.com. The printer was correctly identified even before I installed its driver.
I am trying to print web pages, ODT documents, and PDFs documents from Preview, either two-sided or as booklets. The booklet printing option appears nowhere, while the two-sided printing option is grayed-out. Both options show up and work properly under Windows XP.

1. If the form is a oure XFA form then you can control the duplex printing settings in the Master Pages. You may need to define a second Master page that has the duplex printing on for the appropriate pages.
2. Yes having a checkbox indicate a value in another field is possible but you will need script to do it. On the chanege event of the checkbox you want checked you can add code like this:
if (this.rawValue == 1){
numericFieldName.rawValue = 100.00
} else {
numericFieldName.rawValue = 0.00;
Paul

Printing a booklet

I am having a terrible time trying to print a booklet. The end result should be 8.5 x 11, printed on 11 x 17 paper.
If I try to print directly to our Canon ImageRunner, I get an error.
If I export to a PDF, it either prints out as an 11 x 17 page size or I get a booklet with the pages all out of order.
If I were printing from something like WORD, this would be a breeze.
How can I get help?

And don't attempt to use the Canon's booklet module from Print Booklet.
If the Canon has a finisher that can fold and staple, I think you'd do better to export the file to sequential pages as a PDF and print from Acrobat.

Creating a multipage PDF that prints 2 booklets side by side?

Hi I am a designer with NO pre-press experience and I need some help!
I am trying to print a booklet that is set at 8.5 x 7 as a 2 up document on 8.5 x14 paper. My problem is that I don't want the booklets to print consecutive pages (right now they would print 1,2 3,4 5,6 etc.) I want them to print side by side so that when the sheets are cut we would have 2 completed and collated books.
I know that I could just duplicate each page and print that, but I am wondering if there is a quicker way to make this happen? We have over 100 different multipage PDFs to print so I'm looking for a lean way to get this done.
Is this possible? Do I need to purchase pagination software?

When I need to do this I generally make a file set up as a single page (8.5 x 7, in this case) for easy design, then create a second, non-facing doc at two-up size (8.5 x 14) and place the pages from the first file int the second tow times so I have two copies per page. I use the Multi-page importer script for this: InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files

Problem of the poor quality of print as booklet

I hv encounter the problem about the output quality .The file is quite low in resolution while i choose print in booklet,
I use the SAME pdf output setting. The output pdf file from "export (pdf)" it is abvious better than the one from " print as booklet"
How can I fix this problem ?? THX A LOT

How do i get Reader to NOT print in booklet form?

All my print settings are set to print normal, but only adobe reader prints in booklet form. I've checked the "properties" settings for the printer and the "page layout" is set to 1 page per sheet and booklet is not checked. On the print dialog screen the page scaling is set to "shrink to printable area." Adobe Reader is the only program that prints as a booklet. Is there something i'm missing???

Dear user,
You should be doing just fine if you have already ensured that printer settings are not referring to booklet as well as Reader printer dialog.
This works just fine for all the users. Are you still seeing this issue or is this resolved?
Thanks,
Atul Agarwal
Adobe Systems

Parent package shouldn't fail irrespective of that child package fails of success..

Hi friends,
I have a small requirement here.
we have 10 child packages and one parent package. Calling the child packages from parent.
irrespective of that child package fails of success , parent package should pick the next package..
EX.. Parent package calling the 5th child package, due to some error it got failed. Now parent package shouldn't fail it will skip the 5th child package and call the next 6th child package ...
if the child package success parent should have to call the next one..
if the child package fails parent package shouldn't fail and it calls the next child package..
How we can implement in this in ssis..

See how you can apply logic as discussed here
The key is to set propagate variable to false within OnError event handler
The logic would be like this with the only exception being you need to use execute package task inside loop
http://visakhm.blogspot.in/2013/03/error-handling-in-ssis-loops.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Indesign wont print duplex booklet

im having an issue printing duplex booklet straight out of indesign
i have enabled two sided printing on my BROTHER MFC-J6510DW printer dialogue, but when you send it, it doesn't print duplex.
for now i have had to add a PPD patch file so i can print the booklet to PDF (postscript) file, and then from there the printer seems to have no problem printing the document duplex.
any ideas why it doesn't work straight from indesign?

Other programs don't mean a thing to ID and printing. The bad news is I'm a Windows user and the dialogs are a little different and I never can remember which buttons are which on the Mac. You need to get all the way to the printers driver settings dialog -- might be called printing preferences or something similar, and it may be one level deeper than you've gone so far.
Or it could be that ID and that printer just don't get along.

Printing a booklet on 970Cse

I have a HP 970Cse and need to know if I can print a booklet (5.5 X 8.5) using letter size paper.

Hi karismac,
In Pages, as in most applications, the paper size printed to is managed through the File > Page Setup menu. See this document for details -
OS X Mavericks: Page Setup dialog
http://support.apple.com/kb/PH14418
Note that if the size you want is not available in the dialog, you may add custom sizes.
Thanks for using Apple Support Communities.
Best,
Brett L

CC Package to IDML fails print-to-booklet in CS6

Similar Messages

Maybe you are looking for