CC == Screen gets blank when editing text

I am having this issue with the new PS CC. It happens whenever I try to add/edit a text. Pick the text tool, click onto the work and -- bang! -- the whole work screen gets blank. Depending on the project size it may get stable at a certain ammount of zoom and keep blinking (or go completely blank) at other zoom factors. If I finish text editing the screen gets back to normal. Funny is that if I type something, it will be there, so the problem seems to be with the viewport.
There is someone else out there experiencing the same problem?
PS: Currently I am going to download and install back the CS6 version as the issue reported above does not happen with it.

I have the same thing with editing text as well as cutting out images.
I have a wide screen brand new dell monitor and 12gb ram.
Pretty sure it's not the computer....as yankleber says, CS6 had no issues.
Let us know when it is resolved.....
Update: I managed to get the latest AMD Radeon drivers updated and I must say, so far no problems anymore.
It would be great if somehow during the installation of an update or a new version the install program would tell me, "please update your driver".
Not sure if this is feasible but it would be great! Tks

Similar Messages

I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export. I use windows 7.

I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export. I use windows 7. I also tried to export a document directly from Adobe Reader using the tool, but it gave me an error message. Any suggestions?

Hi,
Try to use different browser.
Would it be possible for you to send me the document so that i can take a look at my end?
You can email me at:[email protected]
Regards,
Florence

Screen is blank when I click on the "Site" icon, no avenue to upload to an FTP. Help please

Trying to upload a website created through iWeb to an external host since MobileMe no longer an option. I Web is only linking to MobileMe when I click "publish". Researched instructions through the Apple tutorials and webs help sites, says to click on the "Site" icon, then a dropdown menu should appear. My screen in blank when I click on the "Site" icon. No options for loading to an FTP??? I have an external FTP purchased and ready to go, very frustrating. Thanks for any support!!!

iWeb 08 does not have that feature. You will need to upgrade to iWeb 3 in iLife 11 in order to get that feature. You can get iLife 11 at the online Apple Store while supplies last since iWeb (and iDVD) have been discontinued by Apple.
To pubish to an FTB server in iWeb 2 use the File ➙ Publish to Folder menu option and then use a 3rd party FTP client like Cyberduck to upload the site files.
OT

My screen goes blank when receiving or making calls.

My screen goes blank when receiving or making calls. Cannot get back to the tiles window until the other party hangs up.

Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

The screen goes blank when I press to enlarge while watching netflix or a TV show. What have I done?

Have you tried resetting the iPad:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

App Store icon shows three updates, but the screen is blank when I try to update my ipad

App Store icon shows three updates, but the screen is blank when I try to update my ipad

Already covered in a discussion that has over 180 threads to it. Search before posting please or just simply look down the list of current topics. It's readily near the top.
https://discussions.apple.com/thread/5194126?tstart=0

I cannot get sound when editing

I am not sure why I can't get sound when editing.
I've tried different things to correct and nothing is helping.

1: What's your setup?
- If you have external speakers, do you have sound when you unplug those?
2: Do you have sound from other apps and the system? (try the Sound PrefsPane..)
3: 'No sound when editing' Do you mean when scrubbing, or during playback??

Iphone 3gs screen goes blank when it rings/gets a text

My iphone screen goes white when i get an incomming call. I can answer it if i slde my finger across the general area where the answer switch will be.
In order to view the screen after the iphone has locked I have to hit the home button followed by the power button 3 times.
Does anyone know if this can be fixed? If not will i be able to get a replacement. I'd be willing to pay as its out of warranty?
Thanks in advance for any help you can give me!

Remove your case and see how it works. It may be blocking the proximity sensors that turn the screen off/on during a call.
Message was edited by: paulcb

My macbook boots up get a screen picture then screen goes blank, when boots up I get the sound then a screen then screen goes black is this a battery problem or something else?

my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.

Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling

Screen gets black when engaged in a call

I am having the same problem with blank screen when using the phone. Hasn't always done this, about one week. Would appreciate suggestions.
Moderator's note: The subject was edited as the post was moved to the most appropriate board.

Obviously the screen will go blank when you are on a call but generally its off when there is something at a distance of 1 cm and turns on again if not.
So if your screen gets switched off and you want to turn it on , check by clicking on the "power" button it should turn on.
Corrective measures:
1. Proximity sensor is not covered.
2. Check without any screen protector.
-Thanks
Click on "Accept as solution" if it worked for you else if it was helpful you can click on "Kudos star" below.

Can my client add a link when editing text with the content management of Business Catalyst?

I created a site using Muse. My client chose to host with BC and take advantage of the content management option. She has edited text to include her email and wants to create a hyperlink from that text to her actual email. Is this possible and if so, do I need to change the user Permissions to allow her to do this?

Yes, she is editing content in the admin panel, but when she edits the text, she just gets the option to change text and update. There is not a button for hyperlink and then email. It seems like linking, something so simple, should be allowed. What do I need to do to allow this to happen for her?

InDesign crashes when editing text (branched)

Hello,
using the newest indesign version 752, i have the same problem as described: when i try to edit text, pasted in (from browser, word, etc.), indesign crashes. sometimes it happens, i get into the textbox ...but cannot edit the text ...seems to be locked?
did you found a solution for your problems?
regards
thomas

Peter's correct that there is no way to downgrade short of an uninstall/reinstall.
I believe we're in a gray area discussing rapid releases on the public forum.
But let me say that I do not think you have any good reason to downgrade from 7.0.5.571 to 7.0.4.553 and that while you should certainly try it and see, because it might actually work, I would not put any money on it.
More significantly, you're running "+SmartCatalogCore v8.0.4 build 52" and Smart Catalog 8.0.5 is out. So I would upgrade first and then report the crash to Woodwing if it is reproducible.
I don't use SmartCatalog (but I do use SmartConnection), but I'd suggest you may get better support from Woodwing's forums or their actual support (or reseller support) than here. "But maybe not."

Touchsmart 20-f230 screen get blank

Got a Touchsmart 20 all in one computer, where the computer works well, but the screen is blank. Manage to install a remote program on it and while the screen was blank can still access the computer and everything work of course remotly. Would like to know if somebody can inform me if this is a modular system and what parts has to be replaced so it can work fine again.
Thanks

Hello @ArubaDigital,
I understand that your HP Pavilion TouchSmart 20 f230 All In One Desktop PC has a blank screen and if you remote in you can see what is displayed. The issue you are describing appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Screen goes blank when using Patch tool

The only information I've been able to find on this issue thus far was a post that was written during the Photoshop CS6 beta period at http://forums.adobe.com/message/4285375
I am using the final released Photoshop CS6 software, not beta, and am having the same issue with the Patch tool. I start to drag around an area to make a selecton, and the screen goes blank so that I can't see where I'm making the selection. When I release the mouse, the image appears again. Another problem which may be related is that sometimes when I zoom in, the screen goes blank. Closing Photoshop and re-launching it usually fixes the problem, but is an annoying time-waster. I have the most current update from the Cloud for Photoshop CS6, 13.1.2.X64.
Does anyone know a fix for this?

RAM is 12 GB. I'm not sure which numbers are relevant for VRAM and scratch drive, but this is what I found for video card properties:
Total Available Graphics Memory: 2809 MB
Dedicated Video memory: 1024 MB
System Video Memory: 0 MB
Shard System Memory: 1785 MB

Excel for mac ver14.4.1 screen goes blank when i change to & from full screen view

when i'm working on an excel document, if i am in full screen and hit escape to go non full screen the document goes blank.
if i hit the full screen arrows again, i see my document momentarily and then the screen goes blank again.
i believe this issue began recently after the most recent version update. i must constantly save my documents in case i go in or
out of full screen view and my page goes blank so i don't lose my work. does anyone else have this issue and what can i do about
it? my macbook uses os x ver 10.7.5. not sure if this is an excel problem or an os x problem.
thanks to anyone who can help me figure this out.

Hi，
As your request is relate to Excel for Mac, better to post your issue to the forum below:
http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Wind Zhang
TechNet Community Support

CC == Screen gets blank when editing text

Similar Messages

Maybe you are looking for