[CC] Search for Workaround for old Bug: XML Validation fails

In Dreamweaver the validation of an XHTML document "as XML" fails.
Result:
An exception occurred! Type:NetAccessorException, Message:Could not open file: http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd[xml]
The bug seems to be very old:
http://forums.adobe.com/thread/874435
Do you know any workaround? Is there may be a plugin which can validate XML?
Thanks.

I appreciate your detailed answers, David. It's a pleasure to discuss with you
My own criterium, if a non-fixing is shameful or not, does not depend on the frequency of the usage of a function (by me or any other user).
It depends on the facts, that Adobe knows the bug since many years and that it is a bug in a very basic module - the search and replace module.
I take it as a proof of my assumption, that Adobe behaves arrogantly in many ways.
They just don't care about maintanance.
Thanks for filing the bug about "validate as xml".
I logged into my prerelease account (I took part some years ago). But it seems that I have no access to the bug database.
In my prerelease account there's no link to the bug database.
I agree with you, that concerns would have more chances to be read by developers when you talk about them in the pre release forums.
But my experiences with filing bugs are so disappointing, that I do not like to spend my time anymore for that.
While betatesting we had a "personal usability engineer" to talk to him. I talked a lot to him, constructively and polite. But in fact, he has no influence to the decisions which bugs will fixed and which not.
We can talk about the search and replace module in 10 years.
I'm sure it will look the same as today. It will have the same bugs as today. It will have the same functionality as today.
No improvement at all in such an important module.
That's my assumption based on the experience of the last 8 years.

Similar Messages

  • Can't search for the term 'XML' in HTML-Help

    Hi!
    I work with RH8HTML (8.0.0.203), Windows Vista Business SP2 and IE 7.0.6002.18005.
    I've created some topics which include the term XML. When I create the HTML-Help, then search for the term XML, I am shown a message that says Help cannot search for that term. But when I create Web-Help, Help can search for it!
    I have checked the Stoplist and the List of ignored words, but XML is not listed.
    Does anybody have an explanation for this strange behaviour?
    Thanks for helping a help author!
    Kind regards,
    Kurt

    Hi all
    I just tested this in RoboHelp 8 and it was fine on my own system. The message Peter saw seems to be the typical "Click cancel to stop the search." I attempted to capture it on my own PC but it flashes by so quickly that it eludes me.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac.  Any suggestions?

    I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility.  Any suggestions?

    Is the computer in you equipment line:
    Dual Core Intel Xenon
    (which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
    If a Mac Pro, their forums are here:
    Mac Pro
    and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
    If you really have a pre-2005 PowerMac, read on.
    If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
    The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
    Get a powered USB hub (has its own power brick
    Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    The second gets power from two USB ports on the computer and often that's enough.
    Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

  • Just installed Firefox 4 but when I try to search for add-ons every result fails to find anything or the loading gui just keeps spinning. What should I try to fix this problem?

    Just installed Firefox 4 but when I try to search for add-ons every result fails to find anything or the loading gui just keeps spinning. What should I try to fix this problem?

    Glad you seem to have sorted things out.
    The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

  • Searching for Old Calendar Appointments

    I keep my full Calendar with all my old appointments on my iPad. As such, I have appointments going back 4 or more years. I routinely have to look up dates of some of these older appointments, yet I can't find a way to tell the iPad to search/find them. According to any documentation that I can find, it says that SpotLight Search will only search 1 year in the past and 1 year in the future. However, even if I search for a phrase using the search bar in the Calendar, it will not find these old appointments. Does anyone know of a setting that needs to be changed or how this can be done?
    Thanks,
    Merg

    Hi QTsearcher, I had the same problem, and am now running Myst on Windows 98SE along with Riven and Exile. If you have games from the same era as Myst, i.e. the same time or up to a year later, check the folders and files that come up when you get ready to install them, some have QT programs that you can install alone without installing the game. After you install the QT, then install the Myst and it will find the version that it wants... This is what I did, and it worked for me.
    Good Luck

  • Search for SCN Bug Reporting is broken

    Hi
    See my comments in the pic below.  The bug search is broken.
    I can enter a search term, and even the URL gets updated.
    But the results are not refreshed.  SAP IT has given me a new IE10 today (see further below).
    can this be checked please.
    ( i have seen there are a bunch of other reports on broken searches, they seemed to be about different issues imo )
    Pieter

    I've checked in IE11. Its working fine for me.
    Searching for "Link is"
    Then I have changed the text as "Render"

  • Compilations - Search for Artist (Bug?)

    Hi!
    When I use the compilations menu, it's not possible to search for a compilation track's artist name. I guess the reason is that the artist name is hidden from the artist menu (which is good), but IMHO it should still be searchable. When I turn the compilations menu off, I'm able to find the track by searching for the artist.
    Best regards, Jens.

    I think it's meant to be like that. see the info in the wikipedia change log
    Thanks, but I don't think it's working right. The change log says:
    "Search now has Search Bar for refining search results ... Search all artists, albums..."
    If you type in "House of Love", after the search results appear, you get the Search Bar. Click "Artist" and there's no semblence to the results and what was searched. In other words, it doesn't seem to "refine search results."
    Don't you believe this is a bug? If I type "House of Love", search, click "Artist", and get "Etta James" does that sounds like a "refined search?" What would you expect to get if you search for Etta James and click "Artist"? (sorry, being sarcastic).
    I'm curious how to report this to Apple.
    Thanks,
    Mark

  • Searching for old emails

    Hi
    In one of the email account i have "Day to keep Meesages" is set to 90 days, if i have to search for older mails (More than 90 days) how can i do that.
    Austin

    For an Active Sync email email account, you shoudl be able to search remotely.
    If IMAP, POP etc., you will need to probably search from your PC on the webmail host.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Search for purchased/bought music/articles fails!

    hi,
    just bought two albums in the music store. now i activated my second computer searched for purchased music and it only found 4 of more than 20 purchased tracks. when i try to buy it again it first said that i already bought it and i can sync (which didn't work then) or i should burn the music to a cd/dvd and transfer it manually. nice function crappy implementation!
    sorry for the complicated subject with all the slashes. got a german version of itunes and don't know how the english option for that function is called.
    regards,
    eric.

    I switched to German as system language and now see what you mean.
    'Computer aktivieren...' means to authorize your computer to play purchased music.
    You are allowed to download purchased music only once.
    It looks like 4 of the songs were not downloaded yet on computer 1.
    So when you authorized your second computer, it downloaded the missing songs.
    If the above is true, these 4 songs are missing on computer 1.
    Um zu verstehen was Aktivieren bedeutet, bitte zuerst mal diese seite lesen (please read the Authorization FAQ first)
    Just transfer the purchased songs (using a memory stick, external drive, ethernet, CD or DVD) from 1 computer to the other.
    Because you're allowed to download the songs only once it is highly recommended to create a backup copy.
    Here is the link to the German version of the Terms of Service:
    Dienstleistungsbedingungen (achte auf Kapitel 9!!)
    M
    17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner   Mac OS X (10.4.8)   iTunes 7.0.2

  • WRT54G v8 - searching for Channel after connected, then fails, no internet for wireless connection

    So I have Time Warner Cable Internet
    WRT54G v8 with the 8.00.2 software
    MAC Address Cloning off
    WEP encryptian with 64-bit
    Tpad1 - Thinkpad z61p
    Tpad2 - Thinkpad T41
    Dell - Crap
    All of these worked two weeks ago and I can't remember installing or removing any software on any machines.
    I have had a few of the problems that many have had so far and it is hard to narrow down what the true symptoms are so I will start with these.
    If I power cycle cable modem, then plug in router, then wire connect in Tpad1 internet works fine. If I try to add the Dell wireless internet most of the time works fine. But when I try to unplug the Tpad1 and it tries to connect wirelessly it can't do it and then the Dell loses connection and the power light blinks and then stops and then blinks again.
    I also had the settings open on Tpad1 so that I could see some detail. It looks as if the software on the Tpad1 is trying to find a channel to connect to, then it will connect on the channel I specified in router at 54mbps work for a Google page load then disconnect and start searching for a channel again and the connection drops to 1mbps.
    After this if I turn the Tpad1 off and try to connect the Dell wirelessly that won't work, and if I try to connect through wire it does not connect either.  I need to unplug or reset the router.
    Possible Solutions:
    1. re-flash router - will try
    2. Change wireless settings such as beacon interval to 50, framentation threshold to 2306 or 2304, RTS Threshold to 2307 or 2304
    3. Using CD to install the internet connection

    So this is still an issue. 
    I have come to find that if I am only connecting my Tpad1 to the wireless router it eventually works. It connects and then when I try to access a web page it starts looking for the channel again and then finds it again. Once this happens three or four times (looking for the channel) it seems to get a solid connection and no longer looks for another channel.
    After this I think it is okay for the Dell to connect but I can't 100% remember now.
    We just have avoided using our computers at the same time on the wireless network together.
    also.... when the Dell is connected and then Tpad1 tries to connect, Tpad1 kicks Dell off and Tpad1 can't connect with a solid connection; and after three or four times of re-connecting for both computers the wireless network becomes no longer visible, almost like the router locks up. So a reset of the router and the Dell can connect fine as long as the Tpad1 does not even try.
    This post is being done by Tpad1 connected wirelessly because I am working from home and no one else is trying to get on.

  • PowerPivot for SharePoint configuration tool validation failed

    Validation fails when I run the PowerPivot for SharePoint configuration tool.  I've set up a virtual machine with Windows Server 2008, SQL Server 2012 (with SP 2) and SharePoint 2010.  The firewall is completely turned off (temporarily). 
    The SQL Server service is running (so is SQL Server Browser).  TCP/IP and Named Pipes are both enabled (disabling one or the other doesn't solve the problem).  Remote connections are enabled.  The services have been stopped and restarted every
    time I make a change to something.  Still getting the following error.  Can anyone help?  Thank you in advance!
    Cannot connect to the database server instance.  A network-related or instance-specific error occurred while establishing a connection to SQL Server.  The server was not found or was not accessible. Verify that the instance name is correct and
    that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

    Solved it.  I used the IP address as the server name, instead of using the standard naming convention.

  • Inbound XML validation failed against schema

    Hi Experts,
    we are getting mapping exception at the time of Inbound XML validation but in the trace it is not displaying
    like which fields are not validating.
    I have gone through the Interface mapping in that we are using 2 mapping programs one is imported archives(java mapping) for validation
    and another one is for Messaging mapping.we are getting the problem at the time of validation itself,
    i have navigated by double clicking on the imported archive mapping program it is taken into another page
    where we will get the archive programs.we have soo many xsd files and its path, and one .java file and class file
    for validatting the xsd files. up to now everything is fine.
    please find the remaining question in the below post

    CONTINUATION QUESTION FOR THE ABOVE
    If i click on the xsd files it is displaying the complete schema structure, but in the case of 2 xsd files(those are using in one
    interface where we are getting validation error)it is displaying the error like "cannot display file com/AAA/BBB/java/CCC/xi/bc/validator/xsds/<filename.xsd> unable to determine code".as per my assumption the xsd file
    is not present in that perticular path, if so how can i put these xsd files into the path specified? how can i get that folders to nagvigate into that path? And also i am not able to download the xsd file from the external defination, is it work if i copy the file into note pad and by changing the extension as .xsd ?
    We are using PI7.0, give me an idea how to resolve the issue
    Thanks in Advance

  • Searching for SESCrawlerExport config xml

    Where would I go to find the repository name and config XML URL generated by SESCrawlerExport? I am creating a Content Server source in Oracle Enterprise Search. When I click to start the SESCrawler on its way to create an image of a repository I get a message that the SESCrawler is already running. Great! Where is this config XML? I don't know what the repository had been named when the SESCrawler was first started. I was not present when it was first started and there is no one I can ask that has worked with UCM enough to be able to find it.
    Keith
    Edited by: user8698823 on Feb 4, 2010 11:55 AM

    Hi
    config<crawler>.xml and the repository image would be present in the installed directory for SES . It is there that the files are created everytime you start the Crawler export from content server.
    The details where the SES is installed and where the content server is looking to put the xml files are there in
    config.cfg under <cs home>/data/component/sescrawlerexport
    In the config.cfg sceFeedLoc is where the image and the config xml would be residing.
    Thanks
    Srinath
    Edited by: srinathmenon on Feb 5, 2010 2:09 PM

  • Quicktime inst error searching for old drive

    Please help,
    I am using win xp, trying to re-install itunes/qt 10, after replacing bad hard-drive. My old hard drive had 4 partitions on it d,e,f and g. I originally installed itunes/qt on drive g. My new drive only has one partition drive d. I have removed all apple installations including bonjour using windows installion cleanup utility, etc. I have cleaned up the registry. I tried to install qt as a stand alone and itunes/qt setup. For some reason both installations stall because "drive g is an invalid location" and does not complete. Is there a way to trick the installation to choose a valid location? or a work around?

    Excellent news, xo.
    In QuickTime install contexts, messages mentioning the \lib\ directories can be associated with trouble with your Java runtime on the PC. (There's a QTJava.zip file that the QuickTime installers and existing .msi databases can look for in your Java program files, and that \lib\ folder is in the Java program files.) So it might be worth also checking to see if your Java runtime is currently up to date. (Updating the Java on the PC often gets people past \lib\ errors.)

  • LV search for old dll names while launching application

    Hi,
    I have changed some dll that I use in a LabVIEW Programm. To follow the changes to make in my Vi's step by step, I changed the name of the dlls one after the other, so that I get broken arrays. Then I adapted my Vi's to those new dlls and linked the new dll names to the vi's. Then, I changed the dll names again in order to reuse the initial dll names. And loaded them again while loading my vi's. All goes well so far.
    After a while, I used the Aplication Builder to make an exe and an install version. All goes well. After the Application installation (which also worked well),
    when I launch the Application, the programm always asks me for those other dll names (and not the initial ones which I reused at last).
    Thanks a lot for any Help.
    By the way, I use LV6.0.2 with Windows 2000.

    It is entirely possible that you missed one DLL call. Check again. You can try doing a text search in your hierarchy for the names of the DLLs.
    Another thing to check is your ini file (created for all executables - usually called labview.ini or "application name".ini and is located on the root directory, or your target directorty. If you have removed all references to the DLLs, try deleting it from this file, if its there.

Maybe you are looking for