CC show error /cannot open pdf created by cs5

Dears,
I just bought a new CC to replace cs5. However, when I try to open the pdf file created by CS5. CC stopped and said it is error. Any people can help? Million thanks!
Joy

Joy,
Why open the PDF? The AI is better.
What happens if you create a new document in CC, then tick Paste Remembers Layers in the Layers palette, then File>Place the CS5 document (and untick Paste Remembers layers afterwards)?
I presume you are (still) saving to/opening from your own harddisk, and copying to/from external whatever. If not, what if you do?

Similar Messages

  • Cannot open .pdf created by InDesign CS6, can open all other .pdfs

    I just got InDesign CS6 at work (I use CC at home, but my company could not afford the CC subscription). I'm on PC with the minimum specs for InDesign and Photoshop Elements (also just installed). I have never been able to print to .pdf from InDesign; the program hangs. I have been doing Export to .pdf, press quality with my printer's specs. This has been working fine, except that, on occasion, I have to export the .pdf a few times to get it to open; it will give me an "either not a supported file or damaged" error message. Up until today, I have been able to export 2-3 times and would always get a .pdf that would open.
    As of today, I cannot open any .pdf at all; I get that same "not supported or damaged" error message. However, if I let my computer sit idle for about 30 minutes, it will open. In addition, after exporting, InDesign hangs on a background task of "Export " 5" and I have to close out of that task to do anything further in the program.
    I have read the forums on these issues and done what I can: I have installed all updates, backsaved to earlier Acrobat versions, exported to .idml, etc. Nothing helps.
    I will confess that I am not the most technically-savvy person by any means. My company is small and does not have an IT person, nor is there a budget for calling someone in, so it is up to me and my admittedly limited understanding of this software to fix this issue.
    Help?

    You may have shown me part of the problem. I can't share one of the files I'm working on, as they're full of images and we have client protections that make sharing problematic, but I did try to recreate a new file with garbage text and graphics and that .pdf opened without any problem.
    Could this be a file size issue? The files I'm working on are only 8,900 kb and 200 kb. That doesn't seem too large to me, but perhaps it's enough to cause a problem on my machine.

  • Cannot open PDFs created by Morningstar Advisor Workstation with Preview

    I run my financial planning practice on my Macs using Parallels and Windows XP for Windows-only software and Internet Explorer only secure web sites. When I create PDFs using Morningstar's online application, Advisor Workstation, I cannot open these PDFs with Leopard's Preview of Mac app PDFPen Pro 4. Either apps starts to open the file, but the stalls and I get the dreaded spinning beach ball until I force quit the app.
    I resorted to installing Acrobat Reader 9 for Mac just to be able to read these PDFs. Using Reader, the troublesome files open instantly with no problems.
    Any suggestions?
    If Apple tech support is reading this, I have sample files to email you if you're interested.
    Bud James
    North Wales, PA

    Yes, the files are downloaded properly, because I can open them with the Mac version of Acrobat Reader or on any PC with Acrobat Reader.
    Regarding the comment on licensing issues, the latest version of PDFPen Pro cannot open the offending files either. I emailed sample files to the PDFPen Pro developers at SmileOnMyMac. They responded that they will examine the files I sent and let me know their engineers determine is the issue and, hopefully, their fix.
    Thanks for your comments.
    Bud James

  • Adobe Reader cannot open pdf created by Firefox; "file is damaged"

    Firefox 4.0.1 on Mac Pro Intel using OS 10.5.8 will allow you to save a web page as pdf, using "Print" then "Save as PDF". If you do this you will save a file. If you attempt to open that file with Adobe Reader you get an error message that the file is damaged. Safari does not have this problem. Microsoft Explorer does not have this problem. It is unlikely that this is an OS problem. Adobe Reader is listed as the app to open pdf files. Is there a fix?

    1. I assume you have some PDF documents you have been keeping a long time. Look at their modification date. Is it what you'd expect (years ago) or is it all the same, recent?
    2. Has a TXT file appeared in the same folder as the PDFs?

  • Cannot opening PDF created with Adobe Acrobat 5 on Samsung Android device

    Hi I have an number of links to PDFs on my WordPress.com blog home page (www.creationtonewcreation.com). These were created in Adobe Acrobat 5, with security applied that allows viewing and printing. They open fine on my laptop (e.g. with Google Chrome), but when trying to open on my Android mobile (Samsung Note 3 - a standard design) with Acrobat Reader installed, an error message appears 'The document cannot be opened because it is not a valid PDF document'. It is a valid PDF as it was created with Adobe 5 itself. Do you know what the problem might be?  I have uploaded another PDF (not sure what this was created with) on my other WordPress.com site, and it downloads fine, so WordPress.com is not the problem per se.  Many thanks for any advice anyone can give.  Rob

    Hi Robert,
    I am so sorry for the inconvenience caused & will try my best to get this issue resolved.
    I will recommend you to upgrade your Adobe reader to Adobe Acrobat Reader DC on your Samsung Note 3 mobile phone and then try to view the pdf files. You can download it for free from the Google app. store or you can refer to this link Acrobat Reader DC Learn & Support.
    Let me know if you still experience the same issue.
    Regards,
    Aadesh

  • Cannot open pdf created from website

    Hi, I am trialling Acrobat V9 Pro (on Win XP SP2, 1Gb RAM) and have tried to create a pdf from a multilayered website. It all appears to work fine (looks great in Acrobat), but when I try and open the resulting pdf in Acrobat Reader (v5) I get the old "There was an error opening this document. The file is damaged and could not be repaired" message.
    I did a test with a single page web page conversion and that opened fine in Reader. And also with a different urled multilayered website, and that failed. How do I get this honey to work for me???
    Thanks in advance

    Being able to read a web site is problematic. The fact that you got the first one is good, but that does not mean Acrobat will work with all of the web variations. One way to get the web site (but not as interactive in a PDF form) is to print to the Adobe PDF printer from a browser that can read the site. If you need more on the issues or what works folks would need the URL of the web site to provide more info.
    For AR5, how did you transfer the PDF to AR5? Did you save the PDF from AA9 in AR5 compatible mode (likely the problem)? If not, you will need to use PDF Optimize (or Reduce File Size if you can find it in AA9) to save to be compatible with AR5. Most of the time, the newer PDFs will open, but may be missing things. It sounds like you have a case where compatibility has finally be come a viewing issue.

  • Adobe reader XI cannot open PDF created with distiller version 9.4.2

    Hello everybody
    I need your help with the following problem:
    I created a pdf document once with Adobe disitller Version 10.1.0 and once with Version 9.4.2. With Adobe reader Version XI I can only open the pdf document which was created with distiller Version 10.1.0 but with Adobe reader 9 I can open both documents without any problems.Do you have any idea why?
    Thank you very much and best regards,
    Iskierka

    Hi Steve,
    Sorry, I cannot post a URL to the file because it is for intenal use only.
    I noticed that the pdf file can be opened outside of IE browser if I disable the Adobe Reader add-on (active-X) in IE browser. If I enable the Reader add-on, the Reader cannot complete the file download. The progress bar goes in a half way, and stays there.
    Just FYI, the pdf file was created by Distiller 7. Do you think it is the issue of Reader add-on? Thanks.

  • Cannot open PDF after I created it in my program under PRINT

    cannot open PDF after I created it in my program under PRINT
    Tried uninstalling and re-installing
    I have Reader X to open it with but all that comes through is this message-
    ERROR: undefined
    OFFENDING COMMAND: VM?
    STACK:
    105000

    Thank you for your response...
    I am creating a file in Adobe PageMaker and wanting to make it a PDF for others to view who may not have that program.
    I am operat ing under Windows 7 if that helps any.
    The content of what I am sending shouldn't matter- just JPG's and text.
    Should I uninstall my PDF reader and Cute PDF and re-load them back in?
    Sincerely,
    Leanne

  • I cannot open PDF documents correctly. I get an error on the page that says there is an error on the document. Neither Adobe Acrobat or Reader work.

    I cannot open pdf files that are maps correctly . Some of the data layers are missing. I get a warning message that there is an error in the document and I should contact the originator. I have both Adobe Acrobat and the free version of Reader but neither will open them. When I forward them to other clients, they cannot open them either but can open them from the original sender.

    Open Tools/Options/Advanced/general/Config. editor, copy mail.server.default.fetch_by_chunks into the search box, double-click the preference to make its value false, OK, restart TB, and see if you still have problems with pdf attachments.
    For messages that have already been received in IMAP accounts, you can force a re-download by selecting the Message Source (Ctrl-U), then try to open the attachment.

  • I have iPad 4th Generation with iOS 6.1.3  Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email.  When I tap of the attachment, the iBooks icon no longer show itself.  Can someone please help?

    I have iPad 4th Generation with iOS 6.1.3  Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email.  When I tap of the attachment, the iBooks icon no longer show itself.  Can someone please help?

    Thanks for all (Ocean20 & Courcoul) who replied. 
    Reset the device did not help me but it does triggers me to attempt to resend the PDF file attachment on email--and it works the 2nd time.  My problem is now solved.
    The Adobe Reader is very helpful--it allows me to scroll through the document easily, unlike iBooks, where I cannot scroll straight up or down.

  • I cannot open PDFs.  I kep getting an error report that it had trouble initializing.  I have reinsta

    I cannot open PDFs.  Error report that it has trouble initializing.  I have reinstalled the product several times.  I am using windows 7. 

    Reader version?  Local or online PDF files?  If online, in what browser?

  • I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

    I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way.  I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

    Newer Reader versions are more strict than older versions (and other PDF viewers).  If certain minimum requirements are not met, Reader will tell you that the PDF is damaged.  This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
    You should contact the creator of these PDFs.

  • ArialUnicodeMS is missing error when opening PDF

    Hi
    I have Adobe Reader v9.0 on Windows XP SP3
    When I try to open PDF document I get this error:
    "Cannot find or create the font 'ArialUnicodeMS'. Some characters my not display or print correctly"
    The document then open in gibrish.
    Please advise.
    Thank's

    Use the forum for Adobe Reader.

  • Error "cannot open render.mov"

    Hi
    In FCP, Im trying to fix up some audio. Sent the clip to Soundtrack pro (STP) but STP says error "cannot open render.mov"
    any suggestions?
    I also tried opening the file directly - eg "open in editor"didn't work
    also tried changing the extension to ".wav" which didn't work either.

    Hi
    I've got the same difficulty sending clips to Soundtrack Pro in Final Cut Studio 3. This evening, I found a turnaround that works (at least in my case), but that do not explain whether it is a bug or not.
    I observed that when I send a clip to STP, two files are created :
    • one looks like a STP package file and contains two small files (among them a render.mov that can be read by QT, showing that it is a sound file)
    • the other has the same name but truncated (only the first 18 letters) and is a video clip.
    I put this last video clip inside the STP package, and then it worked : this new package file opens in STP correctly, I can edit the sound tracks, and when I save the file in STP, all changes are made in FCP.
    Can you reproduce this on your systems ?

  • Error while Opening PDF attachment from Mail

    Hi,
    We two Output Types created ZNEU and ZAUF. Two Smartforms are created for the same Output Types. The Issue now is, When ZNEU triggers and send a mail the document is properly decoded and gets opened but for ZAUF it doesn't. It says File damaged.
    This is the code we have used for sending mail.
    CONSTANTS:
              co_pdf(3) TYPE c VALUE 'PDF',
              co_raw(3) TYPE c VALUE 'RAW'.
      DATA:
            it_objbin TYPE STANDARD TABLE OF solisti1,
            wa_objbin TYPE solisti1.
      DATA:
             lv_filesize TYPE i.
      DATA:
            it_lines TYPE STANDARD TABLE OF tline.
      DATA:
            wa_mail_body TYPE solisti1,
            wa_receipients TYPE somlreci1.
      DATA:
           document           TYPE REF TO cl_document_bcs,
           content            TYPE solix_tab,
           wa_content         TYPE solix,
           send_request       TYPE REF TO cl_bcs,
           sender             TYPE REF TO if_sender_bcs,
           recipient          TYPE REF TO if_recipient_bcs,
           requested_status   TYPE REF TO bcs_rqst,
           status_mail        TYPE bcs_stml,
           bcs_exception      TYPE REF TO cx_bcs,
           lv_rec             TYPE adr6-smtp_addr.
      DATA:
             wa_attachx TYPE solix,
             l_pdf_len TYPE i,
             l_con_len TYPE i,
             l_pdf_pos TYPE i,
             l_con_pos TYPE i.
      FIELD-SYMBOLS: <fs_con> TYPE x.
      CLASS cl_cam_address_bcs     DEFINITION LOAD.
      CLASS cl_abap_char_utilities DEFINITION LOAD.
    * Get the PDF version of the OTF
      CALL FUNCTION 'CONVERT_OTF'
       EXPORTING
         format                      = 'PDF'
       IMPORTING
         bin_filesize                = lv_filesize
        TABLES
          otf                         = job_output_info-otfdata
          lines                       = it_lines
       EXCEPTIONS
         err_max_linewidth           = 1
         err_format                  = 2
         err_conv_not_possible       = 3
         err_bad_otf                 = 4
         OTHERS                      = 5.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    * Convert the PDF format to the table type required for the attachment.
      CALL FUNCTION 'QCE1_CONVERT'
        TABLES
          t_source_tab         = it_lines
          t_target_tab         = it_objbin
        EXCEPTIONS
          convert_not_possible = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    * Convert the data which is in text to binary
      l_con_pos = 0.
      DESCRIBE FIELD wa_objbin LENGTH l_pdf_len IN BYTE MODE.
      DESCRIBE FIELD wa_attachx LENGTH l_con_len IN BYTE MODE.
      LOOP AT it_objbin INTO wa_objbin.
        ASSIGN wa_objbin TO <fs_con> CASTING.
        CHECK sy-subrc EQ 0.
        DO l_pdf_len TIMES.
          l_pdf_pos = sy-index - 1.
          IF l_con_pos = l_con_len.
            APPEND wa_attachx TO content.
            FREE wa_attachx.
            l_con_pos = 0.
          ENDIF.
          MOVE <fs_con>+l_pdf_pos(1) TO wa_attachx-line+l_con_pos(1).
          ADD 1 TO l_con_pos.
        ENDDO.
      ENDLOOP.
      IF l_con_pos > 0.
        APPEND wa_attachx TO content.
      ENDIF.
      TRY .
    *     -------- create persistent send request ------------------------
          send_request = cl_bcs=>create_persistent( ).
    *     -------- create and set document with attachment ---------------
    *     create document from internal table with text
          document = cl_document_bcs=>create_document(
                        i_type    = 'RAW'
                        i_text    = mail_body_tab
                        i_subject = email_subject ).
    *     add attachment to document
          CALL METHOD document->add_attachment
            EXPORTING
              i_attachment_type    = 'PDF'
              i_attachment_subject = attachment_name
              i_att_content_hex    = content.
    *     add document to send request
          CALL METHOD send_request->set_document( document ).
    *    Set sender
          sender = cl_cam_address_bcs=>create_internet_address( sender_id ).
          CALL METHOD send_request->set_sender
            EXPORTING
              i_sender = sender.
    *     Receipients
          LOOP AT receipients_tab INTO wa_receipients .
            lv_rec = wa_receipients-receiver.
            recipient = cl_cam_address_bcs=>create_internet_address( lv_rec ).
    *       Add recipient with its respective attributes to send request
            CALL METHOD send_request->add_recipient
              EXPORTING
                i_recipient = recipient.
          ENDLOOP.
    * Set that you don't need a Return Status E-mail
          status_mail = 'N'.
          CALL METHOD send_request->set_status_attributes
            EXPORTING
              i_requested_status = 'N'
              i_status_mail      = status_mail.
    * set send immediately flag
          send_request->set_send_immediately( 'X' ).
    * Send document
          CALL METHOD send_request->send( ).
    *      COMMIT WORK.
        CATCH cx_bcs INTO bcs_exception.
          RAISE EXCEPTION bcs_exception.
    ENDTRY.
    This is in a Class which is been used in the print program for both the Output Types.
    Can somebody throw light upon this.
    Note: I tried using
    but it is not working properly.
    Thanks,
    Prashanth
    Edited by: Prashanth KR on Jan 5, 2010 6:20 AM

    Hi,
    Please paste the part of code where you are getting error.
    And if you are not clear about where the error is, try searching sdn or google with the error message that you are getting as this issue has been discussed many times earlier.
    Check this link.
    Error while opening PDF in mail attachment
    Hope it helps.
    Regards,
    Raj

Maybe you are looking for

  • Portal application not displaying correctly with frame size 125% in IE

    Dear Expert, We are facing issue in Portal (7.0) like, when I open the application "Products Coatings" in myWorkspace with Internet Explorer display size 100% the frame "xyz" is displayed correctly:But When I open the application "Product Coatings" i

  • How do I get an empty chat room to go away?

    I know there are similar questions on the board, but nothing I've tried has worked so far. When I log on, an empty chat room pops open. Before upgrading to 10.6, I used to get a prompt every couple months about this chat room, but it was so inconsist

  • Need to recreate a password protected PDF but can't unlock origional

    I have a password protected PDF protfolio that I need to recreate but no longer have the origional password for.  I could just write a new PDF, but so much time was spent creating the origional.  Is there a way to save a copy and then re-apply the pa

  • Pages on iPad constantly loses my writing. Alternatives?

    I write on an iPad, using Pages. I frequently go back to Pages the next day to find the previous day's writing gone. I've called Apple Care for support, and their only advice to me was to make sure I close the document when I'm finished with it, whic

  • Auditting Java Process under Unix

    Is there a way to see which java processes are running in Unix? ps -f does not work because the arguments passed to java are too long and get truncated