Cc text not displaying when using full motion recording

Hello everyone,
I wanted to find out if anyone has experienced a problem with
cc text not being displayed on slides with full motion recording.
I have added and sync'd the cc text on a slide that has full
motion recording. When publishing the file, no cc text appears in
the the published file.
Is there a workaround or a setting that I need to check to
ensure that the cctext shows up?
Any information which anyone can provide would be greatly
appreciated.
Sherry

Hi Sherry,
I'm having the same problem you were last year! Just wondered if you were able to find a workaround.
I have a full motion page with audio embedded in it (meaning that the audio does not show up as its own item in the timeline view). When I open the Advanced Audio Management dialog box, I'm not able to add a caption because CP4 doesn't think there's sound on this slide. (see attached screen grab -- the slide in question is slide 9. You see that the caption button is greyed out).
I've really hit a wall on this one today. I tried deleting the audio and re-adding it from the library, but it doesn't get added as an independent object in the timeline box; it just gloms onto the "captured animation" object.
Maybe it's simply not possible to have a closed caption on a FMR page? That doesn't seem right though.
Thanks, all.
Janet

Similar Messages

Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Dynamic text not displaying when publishing for flash 8

This dynamic text works fine when the movie is published for
flash 7, but when i export for the flash 8 player it seems to be
invisible. Is there any obvious reason for this happenning?
thanks
jon

Ok, thanks, looks like you've pointed me in the right
direction. I havent fixed it yet though. Heres where i am at:
eval(theTarget+".buttonPrime").tex.embedFonts = false;
now i can see my text. of course its using a default font.
var my_fmt:TextFormat = new TextFormat();
my_fmt.font = "arial14b";
eval(theTarget+".buttonPrime").tex.embedFonts = true;
eval(theTarget+".buttonPrime").tex.text = "wasssup?";
eval(theTarget+".buttonPrime").tex.setTextFormat = my_fmt;
this isnt working. I have added a font object to the library
and linked it for actionscript using the monkier "arial14b".
however my text is quite invisible. i have checcked, 'export in
first frame' for the font object i even tried it with this
deselected. i have deselected the embed font option on the text
feild itself. that doesnt work either (unless i dont try to set the
text format, so long as i accept a default font, its fine).
so err, help?
confused
jon
ps further to this is have discovered more about this strange
behaviour. i can set the text to a different string, provided i do
not try to embed the font in any way. if i set the font to embed, i
can have the text display with the correct font, until i change the
text. then it dissappears. also i cannot seem to affect properties
like font size by means of my TextFormat object. the textFormat
object also does not seem to affect the font of the text.
in short, when exporting for flash 8, i cannot seem to
successfully embed fonts for dynamic text. the only thigs i have
gotten to work are: static text (or a dynamic text feild with
unchanged text) with an embedded font, or dynamic text with a
default font.

HTML tags not displayed when using Data Template

Hi All...
I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
the tag starting with
<
is replaced with
& lt;
I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
API and HTML Formated Content
Re: Problem with text data elements containing escaped HTML codes
HTML Output from CDATA
Re: HTML formatted output
Re: Special characters in CLOB are making report fail
Re: Formatting of HTML tag problem
I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
Re: Special characters in CLOB are making report fail
I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
Thanks in Advance...
Edited by: user10280715 on Dec 9, 2008 3:13 PM

Issue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any.

Img alt="text" not displayed when images are turned off in Safari

I have tried to search this, but every search has returned too many posts, so I apologize in advance.
Have I made some error or is there an issue with my Safari? For some reason my Safari does not display alt="text" when images are turned off?
This is what is supposed to happen (see http://www.w3schools.com/tags/attimgalt.asp) and it works fine in my other browsers (Opera, FF), but with Safari I get nothing - no image, no alt text, no indiciation that an image is supposed to be in that place. According to w3c, Safari is supposed to be compliant.
There is no problem with the site itself, I am designing the site and test with and without images to see how it degrades. As I said, it works properly in Opera and FF - the alt="text" text is displayed in place of the image - but not in Safari.
Is this just my Safari? How do I fix this if it is?
Is it Safari in general? If so, how do we get it fixed, because this is clearly just not correct?

It's not just you. I see the same thing in my Safari. It appears to be a Safari problem, in which case the best thing to do is submit feedback to Apple's developers via the Mac OS X feedback form. (You will not receive a response, as that page notes, but the feedback will get to the people who can use it.)

Help topics are not displaying when using Windows 8/IE 10

I have a WebHelp system created in RoboHelp 7. When opening that Help from our application using Windows 8 with Internet Explorer 10 and allowing blocked content, the Help topics do not display in the right pane when clicking a topic from the Contents in the left pane. Below are the steps:
1. Open the Help system from the Help menu within the application.
2. The Allow Blocked Content displays and I allow it.
3. The Help opens and if I click a topic from the TOC in the left pane, the topic doesn't display in the right pane.
A workaround we found was to widen the left pane and the topic then displays. Also, if you don't allow blocked content, this issue doesn't happen. However, I need to allow blocked content in order for PDFs within the Help to open properly and also because the Search doesn't display without allowing blocked content.
We also tested this with a Help system that was created using Robohelp 9 and have the same issue. I'm wondering if RoboHelp 10 would solve this problem.
Does anyone know if IE 10 requires Help systems to be created in RoboHelp 10 to work properly, at least when allowing blocked content?

It seems to be time for the old divide and conquer approach.
Zip up the project so you have a copy that cannot accidentally be opened and worked on. That gives you a copy that you can safely revert to later if needed. Save the zip file somewhere safe.
Then create another copy of the project so that you have two copies that can be worked on.
Open Copy 1 and delete half the topics. Ignore any broken links reported. Generate the help from that copy.
Open Copy 2 and delete the other half of the topics. Generate the help from that copy.
It should be the case that one copy is now OK and one still has the problem.
Trash the good copy and then create a second copy of the copy with the problem.
Repeat the process until you have located whatever is causing the problem.
The process takes less time than you might think.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Images not displaying when using Mod_JK

Has anyone had this problem with any success?
platform:
Windows 2000 Professional
Jakarta Tomcat 4.1.3
Apache 2.0.039
Mod_jk connector
My_Sql 4.0.1
I have a successful connection between Tomcat and Apache via the mod_jk module.
All JSP's are displaying with the appropriate data from MySql.
My problem is that no images will display when I connect through Apache, via port 80.
When I connect to Tomcat direct through port 8080, everything displays properly including images.
Currently, I am running my application under Tomcat's webapp subdirectory.
Is there something that I perhaps not did properly configure with Apache's http.conf file or with
server.xml?
Any suggestions or answers would certainly be appreciated.
Thanks,
Lenny Sorey

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Hyperlink text not complete when using Create PDF button in Word

Hello -
I have Adobe Professional 9, and Microsoft office 2007. I'm trying to convert a word doc to a pdf using the Create PDF button but the resulting pdf always has incomplete hyperlinks. For instance, where it should say http://www.adobe.com, the output pdf will have : //www.adobe.com
When I hover over the link, the pop up label has the entire URL, and the links work, but I want the entire text to show. I've tried doing a repair with the install disc for adobe, but that didn't help. I've already checked the settings to ensure the Add Hyperlinks option is checked. I just did a complete uninstall/reinstall of all my Microsoft Office products and installed the service pack. I don't have this problem when I use the Create PDF button on my desktop computer, only when I use my laptop (Dell M4300). Any other suggestions?

I don't have my WORD 2007 on this machine. However, are you sure you are using the Adobe product and not the MS feature for creating the PDF? As for using PDF Maker, you should check the options/preferences in the Adobe menu. There should be a check box for conversion of links. Of course there is the question about whether the links are actually correct in WORD. The links only being partial is typical of the links not actually being transferred to the PDF, but simply Acrobat completing the link it thinks exists like WORD does.

WAD Variable screen not displaying when using a customer exit variable

Hello,
I have a query which has 3 variables, one of which is of type customer exit and gets populated with a default value.
When I run this query on the web from within BEX it works fine, however when I run it within any BI7 web template the variable screen does not pop up. Of course if I remove or change the offending customer exit variable the variable screen pops up.
I have switched the display variable check-box to on, and it still doesn't work.
Is this a 'feature' of BI7?
Many thanks
Sarah

Fixed it myself by tweaking the URL....
Added &VARIABLE_SCREEN=X to the end of the url and the variable screen now pops up. Its not an ideal solution but it works.
Anyone have any better ideas?

Timecode not displaying when using QTSS

Hi, I have timecode selected on some of my QT's but when I play them via the QTSS it does not get displayed. If I play them locally i can see the timecode.
Have I missed something silly?

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Legend color not displayed when using custom theme

Hi all,
We are facing a strange issue in the MSS team calender chart's legend colors. The first legend item's color appear blank/white in a custom portal theme while the color appear properly on the standard theme. Inside the chart, the color is appearing properly.
What could be the issue? which property in the theme is connected to the legend?
Thanks and Regards,
Syam.

Hi Sidharth,
We have not done any modifications to the standard service. Also, If this is the reason, why should it appear for some users and why not for others? For those users using the standard theme, the legend colors are appearing properly.
Thanks and Regards,
Shyam.

Audio out of sync with presentation (not using full motion)

When I preview or publish a project using Captivate 5, the audio is out of sync with the presentation. I am not using any full motion recording, which I know has caused audio/video sync issues in previous versions of Captivate. The audio is slide specific, with a separate audio file for each slide. (In other words, I'm not trying to break a large audio file over many slides.) When each slide is viewed individually -- in the workstation, in the preview window, or in the published version -- the audio is synced just fine. The problem arises only when I try to watch the entire presentation (approx. 10 minutes in length). The audio gradually lags behind the visual. By about half way through the project, the visual presentation is noticably ahead of the audio. By the end, the audio is nearly 4 seconds behind the video. I cannot detect a noticeable change in pitch or speed of the audio, so if the audio is being altered in any way, the alteration is slight.
However, if I use the playback controls to advance to a single slide, the audio is fine for that slide and those immediately after, although it does gradually get off again as the project progresses. (So, for example, if I start the playback in the middle of the project, the audio will only be off by about 2 seconds by the end, rather than 4.)
I have tried various publishing options (although I don't think publishing is the problem, since this happens when I preview the project as well). I have used 2 different computers and also tried viewing the published version locally and streaming. None of these alterations seem to make a difference. By the end of the presentation, regardless of how the project is published or viewed, the audio is several seconds behind the video.
My specs:
Captivate 5
Microsoft XP OS
2 GB RAM
Publishing to .swf
Suggestions?

Hi Mukul,
Thank you very much for your careful responses. Here are the answers to the questions.
First of all, the "slow video" behavior does appear only after adding the slides mentioned in previous post.
1.    I created a “software simulation” project. It IS a capture+audio recording.
2.    Since I recorded the audio while doing screen capture, almost every slide has audio, which is not convenient to edit at all. Is there any other better way that I missed so that we can keep the audio and video at the same step while editing them? As I know so far, either insert silence or delete a little audio to one slide, the audio becomes short, but the slide duration time is still the same as before unless we change that manually which normally is not precise enough to match the audio.
3.    I tried to add the blank slides at where there is a pause of speaking and where they are close to the problem slides. Otherwise, the speaking would sound weird.
4.    Published SWF file size is 20.6 MB.
5.    I do have two externalized video files for title and end.
6.    Unfortunately, it is still slow even if it played on a different system.
And another problem comes up these days. After publication, the screen resolution is not good (like some grey ink left on screen) wherever click or type something. It did not happen before even if worked on the same computer.
I am very sorry that there are so many problems. I have been working on this for long time. The project totally drove me nuts. Hopefully you have more ideas about that.
I really appreciate your help.
Sincerely,
Linda

How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

I have a full screen and cannot see my bookmarks.
How do I get my bookmarks to display again in a column on the left of my screen, just as it always has and the way I like them. I do not want to use full screen display without the bookmarks showing.

View > Sidebar > Bookmarks (Ctrl+B)
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

Cc text not displaying when using full motion recording

Similar Messages

Maybe you are looking for