CC to somebody by agent in OBIEE 11G

Hi experts,
How to configure the agent for sending email by CC somebody?
I can only see to, not see CC function.

Hi Kobe,
there is no way to CC a user when you send an iBot. The traditional way will be to have your managers also be part of the iBot so they will get a report too. But the managers will tipically have all the divisional offices they should be able to see, so rather than getting every report each divisional office user gets they will get 1 single report with all the divisional offices in them. The only other way will be to setup static iBots with hardcoded divisional offices so that you can replicate the non-managers iBots.
How to send CC through iBot?
Hope this help's
Thanks,
satya

Similar Messages

  • Agents in OBIEE 11g

    Hi Experts,
    I am trying to create a agent in 11g. And deliver the report on to the phone/Handheld devices.
    Can some one help me with this?
    I would appreciate the help.
    Thanks,
    Kumar
    Edited by: 807167 on Nov 30, 2010 3:28 PM

    follow the steps the send email ( handheld device )
    1) install the scheduler schema required, either through RCU. the scripts are available at
    FUSION HOME/ .. /bifoundation\OracleBISchedulerComponent\coreapplication_obisch1\schema
    2) in fusion enterprise manager -> Business Intelligence -> deployment -> scheduler
    configure the database name, schema, username etc.,
    3) configure the smtp server name and port in config file
    instances\instance1\config\OracleBISchedulerComponent\coreapplication_obisch1
    instanceconfig.xml
    4) fusion enterprise manager -> Business Intelligence -> capacity management -> restart the scheduler
    5) then create an analysis -> then create an agant ( schedule ).. enter all the details like receipts, attachment etc., and save the analysis, agent
    6) open the job schedular using username, password.. you will find the agent ( your created is submitted )..
    7) once job is completed... u will receive the email as expected.
    Hope this helps.

  • Schedulling an agent in obiee 11g on Linux server

    Hi,
    I am trying to schedule an agent on Linux server. I know its possible on windows server, but did anyone try it on Linux, if so please provide instructions on how to do this? Thanks,

    Hi,
    How to schedule an agent? just set the when it must run and the frequency in the agent itself.
    OBIEE has his own scheduler process, so scheduling an agent on Windows or Linux is the same work, everything happen inside OBIEE.
    Of course I assume your OBIEE is installed correctly and all the components are started...

  • Getting error while running Agent in obiee 11g

    Hi,
    We are using external table authentication in our application. We created 10 user in the table, when we are logging to the application we are able to log in.
    After log in when we are creating Agent and click on run, it is showing error as [nQSError: 13024] Successful completion of init block 'security1' is required. (08004)
    Security1 is our initialization block for authentication. But when I create one user in console and give admin priviledges to that user and try to run same agent, it is running fine.
    Please let me know if I miss something or anything else need to configure.
    Thanks
    Anirban

    Hope you have strictly followed the steps mentioned in the document:
    http://docs.oracle.com/cd/E21764_01/bi.1111/e10543/legacy.htm#BABGEHJJ
    Specifically note : Oracle BI Scheduler Server runs Delivers jobs for users without accessing or storing their passwords. Using a process called impersonation, Oracle BI Scheduler uses one user name and password with Oracle Business Intelligence administrative privileges that can act on behalf of other users. Oracle BI Scheduler initiates an Agent by logging on to Oracle BI Presentation Services with the Oracle Business Intelligence administrative name and password.
    For Delivers to work, all database authentication must be performed in only one connection pool, and that connection pool can only be selected in an initialization block for the USER system session variable. This is typically called the Authentication Initialization Block. When impersonation is used, this initialization block is skipped. All other initialization blocks must use connection pools that do not use database authentication.
    Hope this helps.
    Thanks and regards,
    Debarati.

  • OBIEE 11g Ibots not working properly after Upgrade

    Hi ,
    We are currently upgrading our BI enviroment from 10g to 11g.
    WHile we are configuring Ibots ,they really doesnt work, it gives the below error.
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 1 of 3
    AgentID: /shared/test12
    [nQSError: 75006] Failed to send MAIL command. 5.7.1 Client does not have permissions to send as this sender AgentID: /shared/test12
    ...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /shared/
    Can any one give us the exact steps to configure ,or if im missing something....we have configured everything in the deployment of the Coreapplication in the business intelligence of the weblogic admin.
    Regards,
    KK

    Hi,
    check with the below link:
    http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-obiee-11g.html
    It may helpful to solve your issue..

  • OBIEE 11g agents are failed to connect to Essbase

    OBIEE 11g agents are failed to connect to Essbase. We are using :USER & :PASSWORD (SSO) in connection pool setting to connect to Essbase.
    User account exists in both OBIEE and Essbase. OBIEE dashboards which are based on Essbase are working fine. Essbase variables in RPD are upto date.
    Only agents are failing and error says invalid credentials, but dashboard pages are running without any issue.
    OBIEE: 11.1.1.5 (BP4)
    Essbase: 11.1.2.1
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Login fails due to invalid login credentials (HY000)
    Essbase and OBIEE services are up and running.
    Any help will be appreciated.

    We finally implemented CSS Token option and ended up with this error. We are unable to connect to essbase with CSS Token option.
    We followed the Oracle document to implement this.
    [nQSError: 43119] Query Failed: EPMCSS-00301: Failed to authenticate user. Invalid credentials. Enter valid credentials. (HY000)
    We did update this property:
    JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} -Didstore.identityAttribute=objectguid"
    Any help will be appreciated!

  • Agent option in OBIEE 11g

    I have OBIEE 11g(11.1.1.7.1) in my machine as development environment.When i try to create an agent from analytics->New->agent
    But i am not able to find the agent option in NEW menu.
    What are all the required steps to make it enable.
    Thanks,
    prasanna

    Have a look at the below document and section 19.1.
    Configuring and Managing Agents - 11g Release 1 (11.1.1)
    Thanks,
    ~KKT~

  • Agent Issue In Obiee 11g

    In OBIEE 11G, how to send automatically one email for different level users for having a look different data by agent?
    For example:
    One report architeture:
    Region--------District---------Sales
    Region 1------District1--------100
    ------------------District2---------200
    Region 2------District3---------300
    ------------------District4---------400
    One Level can have a look at data:
    Region-----------------Sales
    Region 1-------------300
    Region 2------------ 700
    Another Level can have a look at data:
    Region--------District---------Sales
    Region 1------District1--------100
    ------------------District2---------200
    Region 2------District3---------300
    ------------------District4---------400
    Is it possible to implement this requirement in OBIEE 11.1.1.6? Thanks.

    Hi Satya,
    Thanks for you help.
    If I add this new users into one group in users table and send one email to group, it will no result. Message display as below:
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 0 of 0
    AgentID: /shared/test/sad
    Invalid subscribers skipped: weblogic
    create table USEREMAIL
    Logon VARCHAR2(50),
    Display_Name VARCHAR2(50),
    Group_Name VARCHAR2(50),
    TimeZone VARCHAR2(50),
    Language VARCHAR2(50),
    Locale VARCHAR2(50),
    Email VARCHAR2(50),
    Email_Priority VARCHAR2(50),
    Email_Type VARCHAR2(50),
    Cell_Phone VARCHAR2(50),
    Cell_Phone_Priority VARCHAR2(50),
    Pager VARCHAR2(50),
    Pager_Priority VARCHAR2(50),
    Handheld VARCHAR2(50),
    Handheld_Priority VARCHAR2(50)
    Create table users(
    USERID varchar2(50),
    USERPASSWORD VARCHAR2(50),
    GROUP VARCHAR2(50)
    insert into useremail values
    ('kobe','kobe_xu','BIAdministrators','','','','[email protected]','H','HTML','','','','','','');
    insert into users values
    ('kobe','123456',''BIAdministrator');
    and create AUTHENTICATION block:
    select USERID from USERS where USERID=':USER' NQS_PASSWORD_CLAUSE(and USERPASSWORD= ':PASSWORD')NQS_PASSWORD_CLAUSE
    CREATE AUTHORIZATION BLOCK and set row-wise:
    SELECT 'GROUP', USERROLES FROM USERS WHERE USERID=':USER'
    Please help me to find the issue, thanks very much for your precious time.

  • OBIEE 11g (11.1.1.6) Agent Error : Error Codes: AGEGTYVF

    Hi Team,
    I have migrated an application from OBIEE 10g (10.1.3.4)
    I am facing an error in some of the iBots (Agents) migrated to 11g. Is it related to any Oracle Bug??
    I am using 11.1.1.6.0 in a Windows Server 2008 R2 Standard machine.
    Here is the error detail:
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 1 of 2
    [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: oracle.xdo.template.fo.area.TableArea cannot be cast to oracle.xdo.template.fo.area.TableBody.
    Error Codes: AGEGTYVF
    Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    Error Codes: AGEGTYVF
    AgentID: /users/administrator/Agents/Daily Reports
    ...Trying Agent Get Response Content loop again.... Sleeping for 8 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: oracle.xdo.template.fo.area.TableArea cannot be cast to oracle.xdo.template.fo.area.TableBody.
    Error Codes: AGEGTYVF
    Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    Error Codes: AGEGTYVF
    AgentID: /users/administrator/Agents/Daily Reports
    ...Trying Agent Get Response Content loop again.... Sleeping for 4 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: oracle.xdo.template.fo.area.TableArea cannot be cast to oracle.xdo.template.fo.area.TableBody.
    Error Codes: AGEGTYVF
    Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
    Error Codes: AGEGTYVF
    AgentID: /users/administrator/Agents/Daily Reports
    Exceeded number of request retries for method GetResponseContent.
    -Pratim

    Hi,
    What resolution you had applied to resolve this issue?
    Please share resolution with me as i am also facing. the agent is working file if select Excel,html etc.. the error with if i select PDF format.
    Thank you,

  • OBIEE 11G: Issue with Agent

    Hello All,
    I am trying to make agent work in OBIEE 11G together with Active Directory settings but the agent are failling for some users. Some users are not able to send the ibots:
    We get the following message with Agent Failed:
    Agent ID: XXXXXXX
    No devices for user: XXXX
    Agent ID: XXXXXXXX
    No Content for user: XXXX
    Kindly note that I have already checked the My Account of these users and the email address is well present there.
    Can anyone help us investigate on this issue.
    Thanks and Regards

    Where do you have your LDAP configured
    Is it in RPD or in Weblogic?

  • Obiee 11g Agent- Device (dashboard) is not set in (Userid) delivery profile

    hi
    HI
    I have followed the steps (http://obieemanu.blogspot.in/2011/06/obiee-11g-configure-oracle-bi-scheduler.html) and enabled Agents.
    I am sending the mails succesfully But i am receiving below error....
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 0 of 1
    AgentID: /shared/SSystem Administration/26APRAGENT
    Device (dashboard) is not set in (Userid) delivery profile.
    Please suggest me if i missed anything
    Regards
    Edited by: 917796 on May 2, 2012 2:05 AM
    Edited by: 917796 on May 2, 2012 2:06 AM

    Hi
    Sorry for the delayed reply i havnt looked in to ibots for last few months...
    Steps to configure device..
    After login into analytics....click on ur username u used to login and select My Account..there u can Add email..
    As for as i know u can do this only if u are sending ibots to few users...
    we have to create SA system subject area as shown in below URL
    http://oraclebizint.wordpress.com/2008/04/25/oracle-bi-ee-101332-sa-system-subject-area-autoloading-profiles-and-bursting/
    please send a test mail to [email protected] i will send u a doc with screen shots on how to add Device..
    Apologies again...for the delayed reply

  • OBIEE 11g Agent Includes Action Link Report Name

    OBIEE 11g Agent Includes Action Link Report Name
    I have a dashboard page with multiple reports. One of the reports has Action Links to drill to another report. When I view the dashboard as a web page, the report with the Action Links look fine. The link fields are colored blue. When I send this dashboard page as an HTML email, it shows the Action Link report name in the cell with the other data.
    The dashboard page sent out as an agent should look the same as the web page and the Action Link report name should not be visible.
    Any ideas?
    Thanks!
    Eric

    So you spoofed the values of the 2nd column to have the report act almost like a menu listing?
    if that's the case then check the data type of column 2, it should be set to HTML. Then you will just need to build your HTML tag within the column formula.
    Example below bins the year name into a Link HTML Tag:
    '<a href="http://'|| CASE  WHEN "Time"."T05 Per Name Year" = '2011' THEN 'www.google.com' WHEN "Time"."T05 Per Name Year" = '2012' THEN 'www.yahoo.com' ELSE 'www.apple.com' END || '" target="_blank" > ' || CASE  WHEN "Time"."T05 Per Name Year" = '2011' THEN 'www.google.com' WHEN "Time"."T05 Per Name Year" = '2012' THEN 'www.yahoo.com' ELSE 'www.apple.com' END || '</a>'
    if that is not what you are attempting to do, please clarify.

  • Agents not working in the upgraded OBIEE 11G

    Hi All,
    Recently we hae upgraded our BI Suite(10.1.3.4.1) to 11G(11.1.1.5.0)
    We are able to see all of our ibots(Agents) in the new 11G instance and I have added new recipients, set the schedule for the seedding cache.
    But when I try to run the Agent (Start Immediately), Agent ending up with a warning Invalid subscribers skipped
    Even we have configured the email setup(SMTP) in the enterprise manager and we are able to receive the mail attachments.
    But our goal is to add the usernames in the recipients tab and set the seeding cache option for the specified users.
    How can we achieve this in OBIEE 11G
    Any help would be much apprecialted....
    Thanks
    Praveen Chandu.

    Hello Everyone,
    The write back feature is working fine. There was an issue privilege setting in rpd.
    Now one field is getting editable while pressing Update button in the dashboard report and type new value and pressing Apply button, data is getting updated in to DB table.
    To aviod the manual entry i want to enter a value from some kind of dropdown or any choice box. So could you please let me know how can i achieve this functionality.
    Thanks in advance.
    Regards
    Niraj

  • How to Save Agent Output in Local Disk in OBIEE 11g on linux

    Hi
    I am using OBIEE 11.1.1.6.2
    I want to schedule some reports which will run everyday night and the Output to be saved in my local disk
    I read this article http://obiee1000.blogspot.in/2012/01/actions-in-agents-part-1.html ...but this solution is only for windows platform.
    i need to implement this on Linux.
    Please help me .
    Thanks.

    Hello Srini,
    This article talks the process for Ibots. Is the procedure same for OBIEE 11g agents.
    are you sucessful in achiving this . since i have to involve others in implementing this just wanted to be sure this works for OBIE 11g on linux.
    Please let me know.
    Thanks.

  • Is it possible to execute OBIEE 11g (11.1.1.5.0) Agents externally?

    Hi all,
    Is it possible to execute OBIEE 11g (11.1.1.5.0) Agents externally i.e. using a dabase or shell script?
    I have created an agent and scheduled it to execute a dashboard. But I would like to execute this agent once dataloading is completed, not at fixed hour.
    Thanks in advance.

    Hi,
    You can execute OBIEE 11g agents externally via ODI 11g:
    "...2. Use BI EE Web Services and call ExecuteIbotNow method in the iBotService – This method will be called directly from ODI 11g..."
    http://www.rittmanmead.com/2012/01/bi-ee-11-1-1-5-calling-bi-ee-11g-agents-through-oracle-data-integrator-11g/
    and with command saschinvoke :
    http://docs.oracle.com/cd/E12096_01/books/AnySched/AnySched_JobMgrCfg14.html
    I hop those are helpful enough...
    KR,
    Roman

Maybe you are looking for