CC Update Button doesn't work - Mac OSX 10.10 Beta

The Update and Install buttons on my Creative Cloud Dashboard seem to have no effect when they are clicked upon. It works fine on my Windows machine and previously worked when I had 10.9 installed. However an InDesign update has come up and as much as I click, nothing happens when I push the button. This is probably not an important update, but the next one might be or I may want to install another program and the Install button seems to have no effect also.

You can check the following links :
Re: Creative cloud update always fails (Mac)
Mavericks and AE 12.0/12.1/12.2
Creative Cloud Update fails due to DynamicLinkManager
They can helpful.
Regards
Rajshree

Similar Messages

Laser jet professional utility doesn't work (Mac OSX 10.7)

I've been having connection issues with my LaserJet P1102w lately so I decided to try to set it up for wireless connection (instead of USB). I found that the Ulitity (HP LaserJet Professional Utility), when launched, doesn't do anything.
The application has a generic application icon. It shows "HP LaserJet Professional Utility" in the menu bar, but no window opens up, and there are no options under the menu.
I have tried removing the utility and reinstalling. I have updated the firmware through an update. I have used Apple's Software Update to update the drivers. However, nothing happens when I launch the utility.
I'm running Mac OS X 10.7.5.
Ideas?

Hi @bldxyz ,
I see that you having issues with the Utility not opening, to setup the wireless network on the printer. I can help you with this.
Make sure Safari is set as the default browser. (sometimes the EWS won't open if it isn't set as the default)
Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Reset the printer first to clear out any previous network settings.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page. Select Method two.
Leave the USB cable connected. Delete the printer from Printers and Scanners and add the printer back in again.
Try accessing the Utility again.
If you are still having issues opening the Utility, please do the following.
Close any applications.
On the Apple menu bar, click Go, Computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, it should open up the Embedded Web Server for the printer to configure the wireless, then click the Networking tab, click Wireless on the left and fill out your information. (make sure infrastructure is selected and alpha or numeric is chosen) Apply settings.
You should get a solid blue light on the printer in about 1 minute.
Then delete the USB driver and add the network printer:
Click on the Apple.
Click System Preferences.
Click the Print and Scan icon.
Highlight the printer and click on the - sign to delete the printer. (USB driver)
Disconnect the USB cable.
Then click the + sign and select the printer from the list and click add. (P1102w Bonjour)
Test the printer.
If you need further assistance, just let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Update button doesn't work in Chrome. Again.

I created a blog post in Chrome and saved it as a draft. worked fine. Now each time I update the post and try to save it (update) or save a draft, nothing happens in Google's Chrome. works well in Safari and Firefox on a Mac.
Should I avoid using Chrome with BC?
Cheers

Just installed the iTunes update & now the same is happening to me. Until the update I had no problems with iTunes opening up when I clicked on "View in iTunes" buttons in Google Chrome. After reading the OP, I decided to try in Internet Explorer and it worked fine. Apparently, the update doesn't agree with Google Chrome. *sighs*

I'm installing Creative Cloud on a MAC OSX 10.6.8 I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

I'm installing Creative Cloud on a MAC OSX 10.6.8 I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

I'm installing Creative Cloud on a MAC OSX 10.6.8
You'll have to upgrade your operating system first.
Most, if not all, Cloud apps require at least OS X 10.7.

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

IOS 5.1 Update, Home Button Doesn't Work.

Ever since I installed the iOS 5.1 update on my iPhone 4, the home button does not work at all! I've tried every trouble shooting solution I could find. I've Restarted, I can't hard reset because the home button doesn't work, I've restored from back up, I've restored as new, I've vacuumed out and gently used a tooth brush in the port below the home button in attempt to remove any dust. I've tried opening a factory installed app such as Maps, Safari, Stocks etc and held the top button until the "Slide to power off" showed and then held down the home button until it went to home screen except it didn't go to the home screen at all the "slide to power off" disappeared after a while. I have extremely intermittent response with the Home Button. If i press it continuously it will work after 27 presses one time or 9 presses another but never when I try to do a hard reset and 9.999 times out of 10 it doesn't work. I am so frustrated! I didn't get it wet and it stopped working immediately after the software update. HELP!

I talked to Apple today and was told that it's a "hardware issue" and they will not fix it. I will have to pay 169.00 to have it repaired because it is no longer covered. He told me that "the software update triggered a hardware problem" and that they haven't heard of this issue before either and this was after he went and "spoke with a senior service advisor". The thing is that if THEIR software update triggered the "hardware problem" meaning that if I hadn't updated at all my phone would be in perfect working order right now then HOW IS THAT NOT A SOFTWARE ISSUE?! I am beyond livid. I cannot continue using my phone with assistive touch, NOTHING else works and I know this isn't the first time they've heard of it because how can so many people be having this problem and Apple NOT be aware of it?! My family has bought three MacBooks, three MacBook Pros, one iPad, two iPad 2s, seven iPhone 3s, one iPhone 3GS, five iPhone 4s, two iPhone 4S, four Apple TVs, one Time Capsule and COUNTLESS versions of iPods and have never had an issue having any of them repaired and only four of those products had to be and it was a fast and hassle free...then again they all were covered still at the time of repair...
How do you restore to a previous firmware? I don't want a new phone...I want MY phone to work...the one that worked perfectly before their update....this is beyond ridiculous...I wish apple would take a look at their own support communities and see that this ISN'T our problem...it's a problem created by THEM.

Help. My home button doesn't work. I've to press it several times to get it to function. The phone has 4 months. I've already update software, restarted and calibrated it. I was thinking to go to the service. Has 1 year hardware warranty. Suggestions?

Help. My home button doesn't work. I've to press it several times to get it to function. The phone has 4 months. I've already update software, restarted and calibrated it. I was thinking to go to the service. Has 1 year hardware warranty. Suggestions?

There's another thread with similar problems.
https://discussions.apple.com/thread/2595841?start=510&tstart=0
I wouldn't suggest it though, since it may void your warrantee. Apple will replace it if you bring it in. The genius bar guys aren't too bright, well most of them. But they'll go through the usual diagnosis steps then issue you a replacement if they have them in stock.
I have to admit, Apple has one of the best replacement services that I've ever experience. If you're familiar with costco, the return/exchange process is very quick and painless.

Ran update this morning. Now power button doesn't work and soft boot brings to the battery/cord icon as if there's no power. Can't get into anything. Any help on this?

Update for Windows was run this morning---it actually made me run it twice. I was initially able to use my phone but now I get nothing but the battery/power cord symbol. The power button doesn't work at all. I have tried soft boot of the down volume and power button. Seems to reboot but same screen appears. I cannot access anything on the phone. Is there any help on this?

Hey there, javadan! Thanks for letting us know about the problem with your software upgrade. I'm very sorry for the issues you're having. Based on the two attempts to process, I would have to say there was a problem with both install attempts. You may need to process a factory reset. Which model device do you have?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Iphone 5 update to IOS7.0.2: on/off button doesn't work properly

Since I updated my iphone5 to IOS 7.0.2 the on/off button doesn't work properly. When i try to restart it, it takes pictures from desktop and fails constantly

Hey rcaudillo,
Thanks for the question. I understand you are experiencing issues with your Sleep/Wake button. The following article outlines some troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Sleep/Wake button will not lock or unlock iPhone
1. To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
2. To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
3. If either of the above steps don't work, try turning iPhone off and then on again.
4. If the iPhone will not power off, reset it.
5. Try to lock or unlock the phone.
If you continue to have issues, we may need to isolate the issue further to determine if it is hardware related. The best way to do this would be to restore your iPhone as new:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks,
Matt M.

Macintosh: Adobe Muse; Formular Widget: Send button in Firefox doesn't work (Mac, PC). Works in Safari (Mac) IE (PC). What's happening?

Macintosh: Adobe Muse; Formular Widget: Send button in Firefox doesn't work (Mac, PC). Works in Safari (Mac) IE (PC). What's happening?
URL Test: News
Greetings from cold Switzerland....
Beat

I believe you have resolved this , as I tested on my end and the submit button worked fine.
Thanks,
Sanjit

EDIT button doesn't work in smart web printing.

My edit button doesn't work at all in smart web printing. I can clip & print okay but I can't edit my clips at all. I have vista & ie8. When I click edit, everything grays out in the smart web window & ie8 stops working. I have to recover my tabs but smart web is still grayed out. I have updated to the newest smart web numerous times but keep having the same problem, Please help!!!!

Reinstalling iPhoto would be the way to go. Hit F4 on the keyboard, hold your mouse on the iPhoto icon until it starts jiggling, then click the black cross that appears in the top right of it. Then, head to the Mac App Store (click the Apple in the very top left, it's the 4th one down) and then reinstall iPhoto. Deleting the iPhoto app shouldn't delete your iPhoto Library, but if you're worried, you can always make a backup... Time Machine will do it, otherwise - manual!
Go to Finder. Then in the menu bar along the top, click Go, then Home, then Pictures. In the pictures folder, you'll find the photo library file. Copy it to your desktop or an external disk.
Hope this helps

My iPod 5th generation won't turn on and my middle button doesn't work

My ipod 5th generation won't turn on and my middle button doesn't work! What will I do? It all starmed when I updated iOS 8. It would be fine but would shut down at random, now it won't turn on at all!!! when I press the lock button to turn it on the Apple sign would come up for about 5/10 minutes!! so what will I do???

Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work, The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work

I was in the middle of texting my mom and the screen stopped working! It only stopped working in the middle but i can't even turn it back on because my password numbers won't work when i touch them! I also cannot reboot my ipod because the power button doesn't work! I need help on fixing this problem please!!

Try as best you can with broken button.:
- iOS: Not responding or does not turn on
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My IPod touch 4g screen is FROZEN turned white , with green , white & yellow lines . No connect to itunes , OnOff button & home button DOESN`T WORK? -

My IPod touch 4g screen is FROZEN turned white , with green , white & yellow lines .
No connect to itunes , OnOff button & home button DOESN`T WORK? -
While installing an update for my IPod touch 4g ( that I`ve had for around over a year )
and turned it off while it was " updating " . I turned it on a while after ,
and it was on the apple symbol and then suddenly went to the white screen with the green ,
white and yellow lines from top to bottom . I`ve waited around 2 and a half hours for it to go back .
I`ve tried to connect it to itunes , but won`t connect nor effect the ipod screen .
I`ve also tried the on and off button held and holding the home button as well .
Nothing is working and I`m begging to worry . it's my baby sister's ipod and she's crying already she doesn't know
what to do....

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipad wont reboot & my sleep or lock button doesn't work??

I updated ios 7 on my ipad just yesterday. After a while I used it, then my ipad kept popping out shut down mode, and lock the screen randomly.
I tried to reboot it, my screen kept locking randomly. I tried to reboot it for three times, and for the third time, my ipad wouldn't boot up.
I connected my ipad to itunes and tried to restore my ipad.
The screen now has quitted to lock randomly. But I found out that my lock button doesn't work anymore. And the next thing I did was to reboot my ipad by pressing the sleep/lock and home button at the same time, hoping that my lock button would work again, and suddenly my ipad showed apple logo frequently without showing progress bar. And the last thing I do now is to connect my device to itunes, and it is now back on. But the lock/sleep button still not working. And I think that if I reboot my ipad again, it will give me the same problem as it wont reboot itself unless i connect it to itunes.
Please help me regarding this troubleshooting... My ipad was perfectly fine. Thanks in advance!

Eauddixon wrote:
For the past month or so my lock button hasn't been working. It takes three or more tries to get it to work and sometimes I just can't even use it.
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first...

CC Update Button doesn't work - Mac OSX 10.10 Beta

Similar Messages

Maybe you are looking for