CC will not start

I have just installed, uninstalled run CC cleaner tool etc but the message along the lines of "The procedure entry point crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll" Any thoughts about how to get this programme to run before hte trial runs out?

Sometime your user id Photoshop preference get messed up and the cause Photoshop to fail starting up.  Preferences survive uninstall and installing Photoshop does not install user id Preferences try resetting your user ID preferences
To restore preferences quickly using a keyboard short cut:
Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop. You are prompted to delete the current settings. The new preferences files are created the next time you start Photoshop.
Note: Using the keyboard shortcut, preference files for custom shortcuts, workspaces, and color setings will also be reset to default.
Reset Photoshop's Preferences?

Similar Messages

  • System PI 7.11 will not start because of R3INLPGM error

    Dear experts,
    our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
    On the source node the PI system starts without any problems. If we switch over to the target node,
    the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
    ran under QUSRWRK.
    In the pool files from SAPSTART we found the following errors:
    QPRINT:
    R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
    QPJOBLOG:
    *NONE      Information                 XXXXXXX  SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                         From module . . . . . . . . :   O4TMKLIBIX                                                                               
    From procedure  . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    To module . . . . . . . . . :   O4TMKLIBIX                                                                               
    To procedure  . . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether              
                                         R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority         
    But the authority from all libs and objects are same as on the source machine.
    Any idea?
    Best regards,
    Matthias

    Hello Matthias,
    Please log on as QSECOFR (or a user with SECOFR authority),
    ADDLIBLE SAPXIP71
    and run command
    FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
    Best regards,
    B. Wolf

  • My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    My ipad will not start.  It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Settings (and other Apps) Will Not Start (Metro)

    This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
    http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
    This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
    It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
    Here's the details from the System event log:
    Log Name:      System
    Source:        Microsoft-Windows-DistributedCOM
    Date:          19-Jun-2014 09:21:53
    Event ID:      10001
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          SARSYS9\Michael Sargent
    Computer:      SarSys9
    Description:
    Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
    "15612"
    Happened while starting this command:
    "C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
        <EventID Qualifiers="0">10001</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
        <EventRecordID>546613</EventRecordID>
        <Correlation />
        <Execution ProcessID="972" ThreadID="4068" />
        <Channel>System</Channel>
        <Computer>SarSys9</Computer>
        <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
      </System>
      <EventData>
        <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param2">15612</Data>
        <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
        <Data Name="param4">Unavailable</Data>
        <Data Name="param5">Unavailable</Data>
      </EventData>
    </Event>
    That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
    I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
    Thanks,
        Mike

    Please post questions and problems about using Windows in the Windows forums on
    http://answers.microsoft.com
    The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
    --Rob

  • HT5654 Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Just tried 3 times to update iTunes on my PC running Vista.  There was an error.  It stopped the installation.  Now iTunes will not start at all.  The error message tells me to reinstall which I tried but did not work.  What should I do?

    Hello, Jdragone. 
    Thanks for the question.  Start with completely uninstalling iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H.

  • HP TouchSmart application will not start

    We purchased an HP IQ 526 TouchSmart desktop with Windows Vista Home Premium 64-bit machine approximately two months ago. We use Clearwire to connect to the internet. About a month ago the HP TouchSmart applilcation stopped working. It will not start. Every time we try to start it we get the following error message:
    HP TouchSmart Calendar has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
    Sometimes it says it's the HP TouchSmart Notes has stopped working or one of the other TouchSmart applications. I went to hp.com and updated all of the software for the TouchSmart application and Windows Vista. And I reguarly use Windows Update to ensure my OS is current with Microsoft security updates. I also updated the firmware. After these actions and rebooting many times the application would still not start. At this point I contacted HP customer support. We uninstalled HP TouchSmart, then reinstalled. This didn't work. I continue to see information events in the Windows Application Log almost every minute regarding HPTouchSmartCalendarNotes. They are typically the following messages over and over:
    Reminder clock elapsed event is successfully fired.
    CheckReminder() is executed successfully.
    ShowReminder() is executed successfully.
    After Fetching the XML nodes, checking for each node is done successfully in ShowReminder()
    Events in Events.xml Before Showing Reminder<DataRoot></DataRoot>
    I still have a case open with HP support and they said uinstalling the OS and reinstalling is likely the next step but I have to believe someone else has run into this issue or HP has a QFE for this issue. I really do not want to uninstall the OS and reinstall it. This has become very frustrating as the HP TouchSmart application is the primary reason we purchased the computer so my wife can manage our photos and music collection via the touch screen.
    If anyone has seen this before or has a solution I would love to hear about it. We are considering taking the computer back if we can not resolve this issue.
    On a related note and this might be a separate issue I continuously get HPTCS stopped working messages. I've searched the internet for what HPTCS.exe is and what is does but there is little to no information available.
    Please let me know or if there is additional information I could provide that would be useful for troubleshooting.
    Cheers,
    G

    Our machine was sent back to HP and they reformatted our hard drive and sent it back. Wow. Fantastic service. NOT!!!! I could have done that. Without debugging their own software to figure out why this was happening they reformatted the hard drive. I can only expect this problem will happen again since there must be a software update, etc... that is causing this behavior. I honestly do not know how to voice my disgust in their customer service. I have been a long time fan of HP and we basically only buy HP at work but this was the poorest display of customer service I have ever encountered. If your TouchSmart application stops working and the TouchSmart software updates do not resolve the problem you might as well pretend like you bought a normal computer without touch capabilities. Like buying an iPhone without it behaving like an iPhone.

  • Firefox will not start on limited account. Reports firefox already running but doesn't show in task manager. Adminstrator account work fine

    Firefox will not start on limited accounts. It reports firefox already running. This happens even if no other users are logged on. Administrator accounts have no problems accessing firefox

    Create a new profile as a test to check if your current profile is causing the problems.
    See Basic Troubleshooting: Make a new profile:
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Oracle 10G Non-Network install - OEM will not start when on the LAN.

    Greetings,
    Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
    Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
    In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
    The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
    ===========================================================
    IP_address hostname.domainname hostname
    where:
    IP_address is the non-routable IP address you entered for the loopback adapter.
    hostname is the name of the computer.
    domainname is the name of the domain.
    For example:
    10.10.10.10 mycomputer.mydomain.com mycomputer
    ==========================================================
    In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost
    192.168.110.250 IBM-6AB1330E158
    ==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
    IP_address hostname.domainname
    - not -
    IP_address hostname.domainname hostname
    Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
    Thanks in Advance for any help,
    ADG13

    I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
    And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
    fwiw,
    ADG13
    C:\Documents and Settings\Administrator>ipconfig/all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : IBM-6AB1330E158
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : ibm.com
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Loopback Adapter
    Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.110.250
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
    Physical Address. . . . . . . . . : 00-11-25-13-96-AF
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.1.102
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 65.24.7.3
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
    Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
    Ethernet adapter AGN Virtual Network Adapter:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . : AGN Virtual Network Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-01
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 9.49.217.159
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . :
    DHCP Server . . . . . . . . . . . : 9.49.217.159
    DNS Servers . . . . . . . . . . . : 9.0.2.1
    9.0.3.1
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
    Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

  • Lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

    lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

    Reh... Doesn't work on my 2012 Mac mini. A function key set in Sys Prefs worked in Leopard and Lion on my MB but I cannot get any key to work using SysPref Dictation & Speech. It is befuddling and now I have to go to Edit-Speech to turn on and turn off speech to selected text.
    I have used Macs and Apple 2es since cave man days and Apple is becoming so befuddling I am wondering if there is even an advantage to it over Windows XP. I spent a lot on this little box, it looks good (the first one had to be exchanged as it wouldn't link to my keyboard ???) but Apple intuitive does no longer seem meaningful.
    If speech to text no longer is accessible by short cuts using Fkeys, why bother to have it in Syst Prefs?
    Apple is losing its way. The pleasure is gone and no one at Apple seems to care.

  • HT4972 my ipad will not start it has an apple in the center and no matter what I do it will not dispeasr, erase or open

    MY ipad will not start. I can only see an apple in the center.

    Have you tried this?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • I have a version Adobe pro 7, my old computer hard drive failed tried to install on my Windows 8.1, will not start up error message

    I have a version Adobe pro 7.1, my old computer hard drive failed, tried to install on my Windows 8.1, will not start up get error message? any solutions?  It worked perfectly fine on my old computer which was windows 7.0

    Hey,
    I am sorry but Acrobat 7 is not at all compatible with Windows 8. For this, you will need to upgrade your Adobe Acrobat version.
    For better understanding, please refer this kb file:
    Compatible web browsers and PDFMaker applications
    Regards,
    Anubha

  • After removing system fonts and reinstalling fonts, FireFox will not start

    After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
    == This happened ==
    Every time Firefox opened
    == After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

    The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
    The file names will begin with '''bp-'''
    There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
    One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
    See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
    To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

  • Askcom has taken over as my browser firefox will not start, how do I get rid of askcom

    firefox will not start. When I try to open firefox my computer displays askcom every time. I would like to get rid of askcom, I do not know how it got in my computer. I have tried to remove it in Win 7 programs and features but it will not go away.
    My O/S is Win 7 Home addition.

    ''how do I get rid of ask.com''
    See
    :All of a sudden Ask.com showed up today as my default rather than Google. How do I get my Google back?
    :'''https://support.mozilla.com/questions/868741'''
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>
    a good starting place for problems with extensions and toolbars are
    :http://kb.mozillazine.org/Problematic_extensions
    :http://kb.mozillazine.org/Uninstalling_toolbars

  • My itunes will not start in Win XP. I get an error that says MSVCR80.dll can't be found. I am scared if I just reinstall iTunes that I will lose all my music and apps that are in the old itunes. What can I do.

    My iTunes will not start in Win XP. I am getting an error that says MSVCR80.dll can't be found. I am concerned that if I just do a reinstall
    of  iTunes it will overwrite or delete all the music and apps I have on the current app that won't start. When I boot the PC I get the following:
    APSDaemon.exe - unable to locate. MSVCR80.dll not found. Reinstalling application may fix this problem. How can I get iTunes started without losing
    all my music and apps? Thanks

    It won't unless a problem occurs. Back them up, uninstall iTunes and all related components, and reinstall them.
    (100013)

  • Firefox will not start after upgrade from 3.0.1

    I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I cannot open Firefox. It is not like the other "Will not start" problems, because in the Task Manager, firefox.exe pops up, then goes away instantly. I have tried using Safe Mode, doing a clean install by uninstalling Firefox and my profile, cleaning the registry, then using CCleaner, then trying to reinstall, but the problem persists. Sometimes firefox.exe doesn't even show up in the Task Manager. I also cannot use any version of IE(even if I wanted to), Safari or Chrome. They all have the same results. I suspect that it is not a problem with Firefox, but with my computer, but I don't what is wrong. Can anyone help me?
    == This happened ==
    Every time Firefox opened
    == I upgraded from 3.0.1

    Sounds like something is killing off your browsers before they can start. I really have no idea why Firefox 3.0.1 is working somehow, though.
    Do a malware check with a few different programs, you need to use all, because not all programs detect the same malware.
    For each of these, make sure they are updated after installing, and run a full scan.
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page

Maybe you are looking for

  • Cleared Items Interest Calculation??

    Hi, Can somebody explain about "Cleared Items Interest Calculation"?? when we do this and the  procedure to achieve this?? Thanks in advance, Shashi Kanth

  • How do I find all the fixed points of a...

    How do I find the number of fixed points in a randomly increasing sequence of integers in O(log n) time? (1 1 1 1 5 7) as input will return 1. Because 5 is the fifth element.

  • No thumbnails in LR3 import window

    I no longer have any thumbnails in the import window for LR3.  The options to "Check All" & "Check None" are still there but with no thumbnails to reference...

  • Disabled for 40 years

    My ipod is diabled for 40 or so years. (This happens everytime I shut it off.) Usually, I plug it into my ihome and it works again but it isn't. MY home button doesnt work and I dont want to loose everything on it can someone help??

  • Trying to open a QT file on a dvd in FCP

    So, okay, I downloaded MPEG Streamclip. I clicked on OPEN FILES. I clicked on the dvd icon that opens my QuickTime movie ( This was orignially created in FCPro and then exported using QT conversion.) A menu opens with these choices: AUDIO_TS and VIDE