CC2014 causes footage to export sideways using AME??

Recently, as in since the 2014 update, about 8 out of 10 times I export footage using Media Encoder, it exports footage sideways (as in the left-right is flipped to bottom-top). On top of that, sometimes the footage isn't all exported sideways. Sometimes it's just the b-roll, or the footage is exported sideways but the subtitles aren't. What the heck is going on???

Sounds like a bug with particular footage. Can you post a screengrab of your Premiere Pro sequences of the same frame?

Similar Messages

Exporting WMV using AME

Could anyone tell me how to create a preset that allows me to export a .wmv file from AME? I have Flip4Mac Studio Pro HD installed, but can't seem to figure out how to get it to work with my CC suite. Please advise.

mave1969 wrote:
I would like to know the answer to this too, but I suspect the answer is that Adobe still hasn't bothered to implement it despite apparently being aware of user demand for several years.
Like you, I have Flip4Mac Pro so at the very minimum it should be available under the QuickTime component (Format > Quicktime, Codec > WMV) but no, that would be too easy.
Not having WMV export in 2014 is ridiculous.
Amen. I have the Telestream components also. They work fine in Apple Compressor.

Have the problem to export media use the queue after the latest update of Premiere and Media encoder?

After update the Premiere CC 2014 and Encoder CC 2014, I couldn't export the movie use the Queue function?
There always had a unknown error stop the process. (Compile error?)

You need to fix that first.
Export and preview in the Media Encoder and watch when it stops.
There you need to fix the timeline.
Start a new project to see if you can use AME.

Project link when using AME to render AE comp?

Adobe has suggested that we NOT use AE render queue to output file to MXF OP1a AVC-100 due to a bug in the format size . I rely on using the Project Link function when I did use the AE render queue. How do I get that function when using AME to export?

That's not something that you can do with AME currently.
If you rendered a master file from After Effects and then transcoded it in AME, you should be able to preserve the metadata from the master in the transcoded file output from AME. Let me check to see if that works...

How can i use AME for the new OAF page.

Dear all,
I have developed a new OAF page and registered under Employee Self Service.
How can i use AME for the approval process.
Appreciate your ideas?
zamora

I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
Let's look at the workflow and putting an OAF Page as notification.
As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
Hope this gives some idea.

Can we use Data Pump to export data, using a SQL query, doing a join

Folks,
I have a quick question.
Using Oracle 10g R2 on Solaris 10.
Can Data Pump be used to export data, using a SQL query which is doing a join between 3 tables ?
Thanks,
Ashish

Hello,
No , this is from expdp help=Y
QUERY Predicate clause used to export a subset of a table.
Regards

Can't export .MOV in AE cc render queue, But I can Export .MOV using Media Encoder cc

I get “[file path and name].mov”. An output module failed. The file may be damaged or corrupted. (-1610153464) when trying to export .mov using AE cc render queue but works fine in media Encoder cc. My problem is that i need to export animation with alpfa channel for a client and cannot find an alpha channel option in media encoder.
Please help

To export with an alpha channel in Adobe Media Encoder, choose "32 bit" from the Depth menu under the Video tab in the export settings. (That refers to 32 bits per pixel: 8 each for R, G, B, and A.) Of course, that option is only available if the codec can include an alpha channel, such as with the Animation codec in a QuickTime container.
To deal with QuickTime problems with After Effects CC (12.0), start here:
http://bit.ly/QT_AE_CC_12

Using AME in Workflow

Gurus,
I am exhausted trying to find a solution to my problem but with no luck, hope I get some answers here.
I want to use AME in my custom workflow. How do I go about it? I am finding articles which says use ame_api2.getnextapprovers.... but which transactionId to pass to it? Do I need to mention about the transaction type in my Form function of my OAF page call? Totally confused!!
Could anyone be kind enough to list down the steps required to implement AME in workflow?
Thanks in advance,
Rakshith

I have the same issue when we rewind the workflow we get the same block and can not move forward if you have a solution please share as it would be very helpful to me.
Thanks,

Procedure to Export schema using DATA PUMP

Hi All,
This is pandiarajan and i want to know the procedure to export schema using datapump in oracle 10g.
Please help me
Thanks in Advance

expdp directory=<xxxxx> dumpfile=<yyyyyyy> schemas=<schema name>

FYI Notification using AME

Hi all,
My requirement is to send FYI notification to list of approvers. I want to do it using AME rather than Workflow.Please tell me how to achieve this.
Thanks
Pradeep

Hi;
I solved it :)Nice to hear issue has been solved ;)
1. If possible, Please share solution for future similar issue
2. Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

How to export pdf using jsp

hai friends
i know to export excel using jsp
but tried the same process to pdf, it s not work..
please give some solution......
thanks
rex

It's working absolutely fine for me. I suspect the problem is one of these two:
1. You're giving the incorrect path of the file. Check the size of the downloaded file, it's probably 0 bytes.
2. Check the file that has been created on the server first; is that fine? That could also be the origin of the problem.
This is th code I've used. I copied an existing PDF to my webapps root folder ( $CATALINA_HOME/webapps/myApp/test.pdf ) and hardcoded the values of filename to check it and it works for me.
BufferedOutputStream out = new BufferedOutputStream( resp.getOutputStream());
try
    filename = "test.pdf";
    resp.setContentType("application/pdf");//vnd.ms-excel" );
   resp.setHeader("Content-disposition","attachment; filename=\"" + filename + "\"" );
    BufferedInputStream bufferedInputStream = new BufferedInputStream(new FileInputStream(getServletContext().getRealPath("/") + filename));
    int i;
    while ((i=bufferedInputStream.read()) != -1)
     out.write(i);
    bufferedInputStream.close();
out.flush();
   out.close();
catch ( Exception e )
     System.out.println(e);
}

How to use AME to define Compensation Workbench Manager Hierarchy?

Hi,
I have set up the CWB to allow HR managers to allocate all the compensation using AME Hierarchy in R12. However, after running the CWB Participant Process using the manager login, there is no employee attached to this manager.
For e.g. a company has 2 compensation managers that determine all the compensation within the company including himself and upper level manager.
My question:
How to setup the CWB to use AME hierarchy to allow the 2 compensation managers to view all the employee in the worksheet?
Regards,
ShiauChin

Even i am facing the same issue.
if i use supervisor hierarchy for the plan. the worksheet is listing the plan and people.
If i use AME transaction, plan is not attaching to the worksheet. I am working with Oracle SR to find the issue.
If you find any solution for this problem please share at [email protected]
thanks in advance
Srinivas B

HOw to create TRANSACTION in order to use AME api

Hello,
we are creating a custom workflow process which should use AME functinoality.
I need to create Transaction to get Transaction ID.
The API
hr_transaction_web.start_transaction()
is private.
Please help

Hello,
we are creating a custom workflow process which should use AME functinoality.
I need to create Transaction to get Transaction ID.
The API
hr_transaction_web.start_transaction()
is private.
Please help

Ebay causes plugin-container.exe to use high cpu

I am using firefox 6.0.1 with Windows XP SP3 and have noticed that opening my ebay summary page causes plugin-container.exe to use between 60 and 80% of available CPU time. I haven't noticed this problem on other pages nor did I notice it before the recent firefox upgrade.
Not sure if this a firefox or ebay issue.

http://support.mozilla.com/en-US/kb/What%20is%20plugin-container?s=PLUGIN-CONTAINER.EXE&as=s

Using AME for Purchase Requisition Apporval transaction type

Hi ,
Product : EBS --11.5.10.2 AME B rollup 2 .
We wanted to introduce approvers based on requisition line total and a dff value on requisition line.
For that we created a line level attribute to calculate the requisition line amount Then created a test condition saying if req line total is > 1500 Introduce and approval group.
When creating a rule It says create a rule at header level So went into Approvals Management Administrator resp and changed the Configuration Variables allowAllItemClassRuleswhether AME allows to create subordinate item class rules-- Yes at transaction type Purchase requisition Approval . This allowed be to create the rule for the line level Tested real transaction on test workbench --This works fine
When tested this using the actual requisition --It gives and error "You do not have the authority to approve this requisition and an Approval List was not created automatically. Please contact your system administrator."
Error message in the log shows :
EXCEPTION:[icx.por.approval.server.ApprovalListAMImpl]:Fatal OAException:java.sql.SQLException: ORA-20001: The input ame_util.approverRecord2 does not belong to the header item class, as ame_api requires.
ORA-06512: at "APPS.POR_AME_APPROVAL_LIST", line 485
ORA-06512: at line 1
Is it the correct way to define rules ?
Is it possible to create a Header level attribute to calculate the line total or check for req total and add an approver looking at the line level req totals ?
Please suggest if any body implemented Line level approval for requisition using AME ?
If this is not the correct forum please inform which forum should i post the thread.
-Regards,
Chandra

Hi,
Please review the following documents and see if it helps.
Note: 333270.1 - APINV: Line Item Class Rules Error in AP with ORA-20001: The input ame_util.approverRecord2 does not belong to the header item class, as ame_api. No Errors In AME Test Tab
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=333270.1
Note: 393099.1 - Ora-20001 Error When Testing In Ame Test Tab
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=393099.1
Regards,
Hussein

CC2014 causes footage to export sideways using AME??

Similar Messages

Maybe you are looking for