CC2014 Project Manager not keeping speed changes

trying to use project manager to consolidate a 40 minute sequence, everything looks good along the way, but any speed changes in the sequence are not keep in the new project....anyone else experience this?  and is there a workaround?

Is this specific to this project (or specific settings) or are you seeing this in general? e.g.: if you create a new Project, apply Speed/Duration to a single clip in a Sequence (e.g.: 200%), then Consolidate and Transcode, does the Transcoded Project still have the Speed/Duration value applied to the clip in the Sequence?
I have not seen any reports on Speed/Duration missing and also ran a few sanity checks with Speed/Duration and Time Remapping in CC2014 (8.2), which all continued to have Speed values applied in the Transcoded Project Sequence. I also tried Collect Files and Copy to New Location, which also retained Speed values.

Similar Messages

  • RH7: Project Manager Tab keeps refreshing continuously

    I have upgraded my project from RH5 to RH7. There were in all 65 projects (.xpj) files that I upgraded. However, i have this issue with some of the files. When I open the xpj file, the Project Manager tab keeps refreshing. I cant scroll and select the files that are towards the end because the moment I click the scroll bar, the the tab refreshes and I cant click on the file.
    Most of the files that I upgraded work fine.
    Please suggest a solution. Thanks.

    Have you tried renaming the CPD and reopening RH to make it create a new one?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file.  I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix

    I have nine, 1-page PDF files that are accessible and need to combine into 1 PDF file.  I have tried appending, adding and the combine PDFs process. The file created is not keeping my changes. The created file is partially accessible but I have to re-fix issues I had fixed in the single files. I need suggestions on what else can be done if any. Using Acrobat pro XI.

    Out of habit, I tend to combine PDF files in the Page Thumbnails pane by right-click then "Insert Pages" -> "From File". For me, this preserves the tags from both documents, although the tags may have to be moved into the right location (if I recall correctly the tags for the inserted pages get put at the end of the tag structure, regardless of where the pages are inserted), If I first put the tags for the document to be inserted inside a container tag like Section, it makes the process easier. Moving that set of tags to the right place is the only re-fixing that I recall having to do. What behavior are you experiencing?
    a 'C' student

  • BIOS could not keep the changes

    Hai ,
     My Desktop HP pro 3400 MT was run with Microsoft XP , now it is not able to boot and showing BIOS is loaded with default settings.When i make cahanges on SATA Emulation to IDE and save and exit  again occuring same as above.
    So i downloaded BIOS update from HP site and installed (BIOS version 7.16). Battery also changed ,still problem persist.
    When i install windows 7 its ok  but System Date and time making issue.....
     How can i keep these changes on BIOS .....

    Noushadkk wrote:
    Hai Erico
       Thanks for ur quick responds,
    I replaced once more the flat 2032 battery with a fresh  one but does not enable the RTC to keep time of BIOS to save changes .
    Thtis may be a silly question, but is the + on the battery facing upwards?  It should be.
    If you somehow inadvertently managed to put it in upside down, it won't work.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Project manager not trimming .mts files

    Relatively new to Premiere and struggle to media manage since my switch from FCP7.
    I keep finding that Project manager is not trimming the.mts files, so still stuck with the entire clips.
    Anyone know of any work arounds?
    Premiere Pro CC on a MacPro
    Cheers

    Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
    Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
    Adobe Premiere Pro Help | Copy, transcode, or archive projects

  • CS4 Project Manager not trimming clips.

    Will premiere pro cs4 project manager trim the source clip file size based on in and out points?
    I could swear I have done this before last year. When I do a project manager trim is creates a folder, changes the name of the file, but doesn't change the original size.
    I created a project and imported just one clip , trimmed in from 1min to 5 seconds and dropped in into a timeline. After the proj mgr export the file wasn't trimmed in the new folder at all. I tried adding handles.

    Thanks Jim. That little tid bit doesn't show up in the on-line help.

  • PP 2014 Project Manager not Trimming Clips

    Project Manager pretty straight forward however the ProRes clips are not being trimmed. I tried both 24 and 0 (yes radio buttons were selected) but when I reopened the project the clips were full clips.
    thoughts?

    I'm having the exact same issue now and it seems to be related to what types of format Premiere supports for trimming.
    My project consists of the following file formats:
    XAVC 100Mbit MXF
    XDCAM HD422 .mov
    ProRes 422 .mov
    If I remove XDCAM and XAVC from the project, Project Manager trims the clips, but if XAVC and XDCAM is in the project the files doesn't trim.
    Adobe Help-page mentions this: "Some formats, such as Long GOP based media files, cannot trim media, or add handles." But it doesn't state what these "some formats" are. XDCAM is Long GOP, but XAVC 100MBit is Intra and shouldn't be affected.

  • Project Manager not trimming projects

    when using project manager and creating a trimmed project the difference between the original nad new trimmed project is minimal
    The large files within the project are H.264. Does Premiere have difficulty with this format as it seemed to work with Pro Res 422 (LT) files?

    The previous versions of Premiere Pro did not support trimming of MPEG material via Create New Trimmed Project. It would copy the entire file(s). With the new Premiere Pro CC 2014 8.1 version, you have a new option for Consolidate and Transcode, which does support trimming of MPEG files to a chosen preset/format. Hope this helps.
    Adobe Premiere Pro Help | Copy, transcode, or archive projects

  • Project Manager not able to view their expenses

    Hi all..
    Project Manager is not able to view their expenses for a perticular project.
    Can any one help..
    Cheers..

    Hi
    Please elaborate....
    On which release?
    Which forms or html pages were tested?
    Verify project manager is still active employee in HR, and has not end dated the role of project manager on the project...
    Have you enabled any security extensions?
    Dina

  • Project Manager not scanning Logic folder ?!

    Hi,
    The most funny thing about the project manager is that, no matter what, I can't have it list my songs, projects or audio files of any types, which are all strored in ~/Music/Logic (as by default settings). Other files stored in any location on my drive (even within ~/Music) are properly found and listed. I've tried rescanning a dozen times. Of course, I've checked that this folder is not excluded from the scan list. Force-including it doesn't help either. Weird, no?
    Any idea?
    Thanks in advance,
    Arnaud

    Correction and addition (I can't get the edit button to appear on my previous post):
    It's just the songs and project (.lso files) that can't be recognised in the ~/Music/Logic folder, as audio files in that folder (or sub-folders) are seen actually. Other .lso files in other locations of the ~/Music folder are seen, as I was sying in my previous post.
    Besides, this should not be a preferences or database file issue, I suppose, since LP was brand new installed for the 1st time on my MPB only a couple of days before I launched scanning with PM and noticed the issue.
    regards,
    Arnaud

  • Project Manager not Trimming ProRes Files

    I was hoping that 8.2 would solve this issue, but it hasn't.  When I choose 'Consolidate and Transcode' in Project Manager, it is not trimming my HD 1920x1080 ProRes files.  And in fact, it hardly trims anything. (It does trim a few Avid 1:1 SD files) I've tried virtually every possible combination of settings to get this to work the way the old 'Create Trimmed Project' did, to no avail.  Please help - thanks!

    Premiere CC's Create New Trimmed Project does not support trimming of any MPEG material. If you update to CC 2014 8.1 or 8.2, there is a new option of Consolidate and Transcode that will allow you to transcode to formats that Premiere can export (e.g.: H.264, MXF OP1a, etc.). It still won't trim to .mts, but it might get you closer to your goals.
    Consolidate and transcode to work with mixed video formats | Adobe Premiere Pro CC tutorials
    Adobe Premiere Pro Help | Copy, transcode, or archive projects

  • CS5.5 Project Manager not collecting all media

    I am having a problem with the Project Manager in CS5.5.
    Although I have used it succesfully in the past, on a current project I am trying to archive it is not performing correctly.
    The issue is that the Project Manager is not collecting all the video clips when processing the project.
    My project and its assets are contained in a folder and not scattered across my computer or multiple drive. The settings I am selecting are:
    Selecting all sequences (11 in project)
    Create trimmed project
    Exclude unused clips
    90 frame handles
    Save in different folder on different drive
    When I process, I am consistantly missing several video clips. They are a mix of avi and mov clips and they seem to be the same clips each time.
    The clips are located with the other video files. They play just fine in the project but somehow they do not get included and trimmed when processed through the Project Manager.
    Any idea or suggestions are approciated.

    Any ideas? Anyone?

  • Project Manager not trimming R3D files.

    Mac
    CS5.5
    I am trying to make a trimmed project. I go to Project Manager and I select "Create New Trimmed Project"
    I include 24f handles, Rename Meda files to Match...etc
    The Resulting (est) project size says 5GB when the actual project turns out to be 20GB.
    Thoughts?
    (Btw, I tried collecting and copying files and the it was the same size (20GB), same amount of footage in both folders)

    PPro can't trim R3D files.  It would require a RED codec to be able to generate new R3Ds... the best it can do is consolidate your project to just the media that's actually used in the edit.

  • Applocation Manager not working after changing and cloning from HD to SSD

    Changed from HD to SSD, cloned everything, CS6 working but Applocation Manager says something is wrong/can't check for updates... Reisnatalled Application manager but problem stays. Mac OSX 10.9 Mavericks

    uninstall cs6, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall.
    do not migrate/clone/copy/etc.  properly install using the installation files.
    or just leave unless you really need app manager.  (you can update your files by downloading the files directly and then applying them: http://www.adobe.com/downloads/updates/)
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • FCP6 BIG PROBLEM - Media Manager Speed change from FCP5.1.4

    Hi!
    We have problem using a media manager project from FCP5.1.4 in FCP6. Almost ALL clips with speed change are messed up (all new speed around 1% to 7%). This is really a problem for us, since we always do media manager of everything we do to be able to go back and make changes.
    We have 2 MacPro 2 x 2.66Ghz, 8GB RAM, 10.4.9, Quicktime 7.1.6, FCP6, Decklink HD extreme or AJA Kona LH (with the latest driver).
    We tryed with different format: HDTV 1080i50, DVCProHD 720p59.94, SD Uncompressed 10bit, .... always the same problem.
    Is there a new way to use the MM in FCP6?
    Thank you!

    Hi! And thanx for the tip.
    But we use Media Manager everyday with speed change WITHOUT any problem (with FCP 5.1.4).
    We already try something similar, we copied the good clips (with speed change) from the ORIGINAL timeline to the media manager one, deleted the bad clip (with the wrong speed change) and pasted the good one in there place. Then we reconnected those clips with the MEDIA MANAGED one. We get a warning that the IN and OUT of the media are not the same, CLICKED continue and everything is always (well 95% of the time) OK.
    SO yes, we have the solution, but it's really really long and painful, especially with multilayered sequences.
    Right now, when I open any Media Manager in FCP 5.1.4 (created with FCP 5.1.4) everything works fine. Doing the same thing with FCP6 = speed change problem.
    Thanks again,still looking for another solution.

Maybe you are looking for