CCA9 DELTA STILL RUNNING

Hi Gurus,
we are loading cca9 delta on daily basis. Today delta is giving problem like.
data has came to PSA, DATA selection has been ended at R/3.
STATUS :request still running.
Current status
The processing of the data was not finished.
in extraction tap record sent still it is in yellow.
process data in update rules.
we change the QM STATUS 'RED' trying to load from PSA Again it is not allowing.
Could you please some one help me on this.
we have to provide the data to users at any cost.
Waiting for response.
Thanks
srini

Hi Krish,
I will appreciate your quick response.
I have done it but still repeat also we are facing the same problem.
Please let me know any procedure beyond this.
I will be thankful for quick response.
Regards

Similar Messages

Delta load still running

Hi All ,
i am running weekly delta load to my financial cube .yesterday i schudled this delta load it is still running , can any body tell me how to reschudle this delta load.

Hi TOM,
As you mentioned it is still running, then go to the sourcesystem, and check Job log in SM37, and if it is active, wait till it you see any updates in the record number and then try to do something.Also check whether the job has gone to dump because of any reasons. Sometimes it appears still running eventhough the job has gone to dump. Don't worry, Because some of the financial data takes times than any other sales data.
Hope this helps you..
Regards,
Madhu

M-bdoc is still running but is ok!!!!

hi all,
i made a m-bdoc to transfer a record from BUT000 R/3 to BUT000 CRM;
i found the new record on BUT000CRM, and the transaction SMW01 says that the process is ok,
but on the transaction R3AM1 i read that the bdoc is still running...from yesterday....
can anybody help me??
(excuse for my bad english....)
Message was edited by:
simba simba
simba simba

What you need is not a delta load, but only a complete re-load of the whole customer data of which the adress is an important part of it. You might want to have a look at the request functionality which downloads BP data (adress / adrc table included) and other objects as you configure it. It can be found right next to the definition and download of standard (initial or synchronizing) downloads.
Regards, Kai

Request showing still running in Monitor after request status is made red

Hi All,
We have a delta load running from an ODS1 to 3 Targets - Cube1, ODS3 and ODS4 through a single delta infopackage. For handling a production data failure, we had to delete the data from these 3 Targets along with the inits. Afterwards we again started the init with data transfer for all the 3 targets simultaneously. The load failed due to processing overdue. Again the inits were deleted for all the requests but during the next day loading we suddenly found the same requests in the 3 Targets with yellow status showing as running. These requests were already changed to red in QM status and the inits were deleted. But can anybody explain how come they again reappeared ?
This question is really intriguing.
Thanks
Somnath.

Hello somnath,
those request are submitted to batch, and they are still alive somehow even if you delete those requests or change them to red. And again tries to load data to providers and if no request available creates new ones.
What can you do?
1. Try to delete those jobs from the queue.(It's not possible for every request unforntunately)
2. Delete the content of provider by using right click on the provider and choose delete data.
Sarhan.

Req still running

Hi
I am currently working in BW3.5
I have 8 datasources which are delta load from R/3
There is a issue with one datasoucre as it is not retreiving the data from R/3
Request still running (0 From 0 Records)
Could you pls let me know as what could be the issue

Hello Pavan,
I think there is a problem in your load. I think you should cancel the load right now. And delete the red request.
After that you can make another load. I am quite optimistic that it will take all the delta records.
In anycase the system will prompt you whether or not your delta will be lost or not so you can act accordingly.
Kindly please do post back if the queestion sitll hangs.
Close the thread if you have got an answer to the question.
Regards,
Den.

A load still running its take 14 hrs

Hi gurus
I have started a delta load in Quality server
it still running as much of time its take nearly 14hrs for just 60 records
I saw the details tab and it shows the Extraction in yellow and remaining all are in green i mean Transfer , Processing , Subsequent processing , ODS Actication all shown in green
Can some budy give advise
Thanks
KGB

Hi KGB,
Any reason why you chose not to terminate this job. And as Diego suggested, do check the dumps and also sm37 (i think) to see if you have a lot of resources tied up for other jobs that are running. Either way, 14 hours is too long for 60 records, isnt it ?

I am trying to uninstall firefox and when i click uninstall it says the program is still running so i stop it and it exits the remove program

im trying to uninstal firefox so i went to my control pannel clicked on add or remove progams then clicked on mozzola firefox and clicked remove it said it was still running so i clicked ctrl alt dlt and clicked task manager and ended firefox from running and when i did that the box to uninstall firefox exited so i clicked it again and the program started running again i dont know what to do i need firefox uninstalled

I assume you are using windows. There are two options:
1. Try restarting your computer and then try uninstalling.
2. Firefox might be a program that starts immediately upon booting. In that case, go to the task manager, end all tasks that firefox is running. Then try uninstalling firefox

When I close firefox I can't open a window again. It tells me that firefox is still running and I have to restart my system. This is a recurring problem on a brand new system and very irritating.

I don't know what other details I can give you. I am not very computer wise. Just an every day web browser and emailer. This is a catch 22 problem. For example when I am installing a program; adobe flash player for example, it tells me to close firefox to continue and when I do I get the firefox is still running message even though there is no window. And so the installation isn't completed. I like firefox but this is a bit of a dealbreaker. hope you can help.

* Try this.
* Type in the address bar about:config.
* Accept the warning.
* In the page that appears, in the Filter box, type network.http.max-connections.
* Change the value to 32 (which is probably set to 256 in your case).
* Close the about:config page.
* Restart the browser.

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

Again thank you. If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email. That's my understanding anyway. Next will my existing .pst file copy directly into mac mail or do I have to runs translator as I recall reading something about that ages ago when I started thinking Mac

After closing the firefox browser of new 4.0 it hangs and says its still running but no browser is visable, XP on 3.6 didnt have the issue ..so whats up???

Open browser then close no browser is open and then click to re-open the browser it says it is still running and cannot get another browser for about a 45 sec....have Windows XP and didn't have the issue on 3.6 version.

https://support.mozilla.com/en-US/kb/Firefox%20hangs <br />See '''hang-at-exit'''

Im still running 10.6.8 on an old MacBook 2.4 Intel Core 2 Duo. Questions about 10.7

Im still running 10.6.8 on an old MacBook 2.4 Intel Core 2 Duo. "Genius" said I couldn't upgrade to enough memory to use 10.7. Doing ok so far except my bank/credit cards no longer support Quicken. If I switch to 10.7.x, what will I LOSE? I don't do change well, and really hate surprises. I understand scrolling goes the opposite way, that Search works differently, and that I'll have to update some of my software, for example, and then THAT software will be different. For example, does anyone know if upgraded 10.7.x is as fully functioning in Quicken 2013 as old OS and old Quicken, for example? Will it communicate with my banks?? That, and general frustration with tired-computer issues would make the switch more appealing.
Thank you all very much.

katetx2001 wrote:
Thanks. Why would I "insist" on Lion?
You mentioned Lion in your post so I assume that you may have reasons for using it in lieu of Mt. Lion. I actually do so for technical reasons regarding my Internet service which will not run on Mt. Lion. If you do not have such a constraint, then Mt. Lion is an acceptable choice.
Ciao.
You may start an new post regarding the rest of your issues.

HT201628 so now i've followed this help now i can't re download itunes. i'm on 10.5.8. Still runs great but now i have no itunes. please can a suggestion be made that doesn't involve spending hundreds of pounds? i was only trying to get an iphone connecte

i'm on MAC OS X 10.5.8. Still runs great but now i have no itunes as i've followed this post that covers my first issue. i've followed it correctly to the part of re install the latest version of itunes and i cant.
i've been running logic pro on this mac and i have no issues so i've not upgraded software etc.
i need a way around this problem without having to upgrade the OS if there is one.
does anyone please have a suggestion that doesn't involve spending hundreds of pounds?
i was only trying to get an iphone connected and this article says 10.6.8 or earlier?? it is definately earlier
macbook - MAC OS X v 10.5.8...... trying to connect an iphone 4s os 6
problem now..........need to re install itunes but can't probably due to my current OS.
please help. i'm pretty gutted about this. i should of researched a little further me thinks. cheers guys

said article below....
HT1747: iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier
Learn about iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier

How to tell embedded jinitator applet is still running when window closed

Hello, we are trying to accomplish the same thing that is mentioned in this post from Metalink. I've searched for a solution and hope someone here can help. Instead of restating the issue I think David Wilson does a good job of explaining what is needed. Can anyone please suggest a possible solution?
From: David Wilton 07-Oct-05 01:08
Subject: How to tell embedded jinitator applet is still running when window closed
How to tell embedded jinitator applet is still running when window closed
Hi,
We run an oracle 10g forms application through 9iAS over an intranet. All users are running windows 2000 professional.
We run separate frame = true but I would like to switch to separate frame = false
With separate frame = true if the user clicks the outer windows "X" close button (forms mdi window) the user is prompted to save changes before the application ends.
BUT
when using separate frame = false
If the user clicks the upper window "X" button (no longer form mdi window but regular browser window) the window and application is abruptly closed.
I'm interested in using a onbeforeunload function to confirm if the user wants to close the window. This would be placed in the basejini.htm file. This could always ask if the user wants to exit or not. If they click OK then the window closes but if they click "Cancel" you are returned to the forms application exactly where you left. something like event.returnvalue="do you really want to exit?";
However if the user exited using the normal exit form method then the applet is already closed before the onbeforeunoad event fires and there is nothing to go back to and I want the window to close automatically. This is accomplished using close.html file in post forms trigger.
So what I want and what I think many may also want is the check if the embedded applet is still running and if so prompt the user to return to the application or continue to close. Of course If the applet is no longer running then just close because there is no reason confirm closing anymore.
Does anyone have a html/JavaScript solution that can be placed in the jinitiator.htm file? or similar?
Thank you
David
[email protected]
From: Andrew Lenton 07-Oct-05 08:58
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I don't know if this is exactly what you are after but you can add the following to the top of your basejini.htm file and it should prompt the user before exiting the IE window.
<BODY %HTMLbodyAttrs%>
%HTMLbeforeForm%
<SCRIPT>

</SCRIPT>
From: Oracle, mohammed pasha 07-Oct-05 09:55
Subject: Re : How to tell embedded jinitator applet is still running when window closed
David,
Well I could not understand your complete requirement.
Refer to Note.201481.1 How to Close the Browser Window When Closing Forms And How to Simulate SeparateFrame By Javascript
Note.115905.1 How to Close Browser Window When Closing Webforms Applet
Kind Regards,
Anwar
From: David Wilton 07-Oct-05 14:37
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Thank you for your reply and yes you did not understand my question fully.
Sorry if this is a long reply
I am able to close the browser window using information in notes 115905.1 and 201481.1, this is not the issue. We implemented this several years ago. It is workable for both separate frame = true or false.
It is most important to not allow the user to end their forms application by closing the windows browser, they must close using normal form exit commands.
What I want is to have separate frame = false, the big drawback to this option is the user can exit the application and bypass all forms code by pressing the windows "X" close button. This is why we need the code as just provided by Andrew Lenton above in this thread.
BUT Andrew's code will always prompt the user before closing the window and I do not want that. I want the user to be prompted only under scenario 2 listed below.
Here's the 2 case scenario for exiting the application.
1. If the user closes properly and uses exit form which fires all normal form triggers including post_form with it's call to close.html file.
All uncommitted changes are saved or rollback and the users session is ended normally both on the database and in the application server.
All browser windows will close, great all is good. And without Andrew's code the window will close but with Andrew's code the user will be prompted to close or not, if they select Cancel the window will remain but the applet has already ended so why prompt? ...This is what I want to avoid.
2. In the forms app. if the user clicks the windows "X" close button with uncommitted changes. The browser just closes the changes are rollback without prompting the user to save. The users sessions are now lost and still running in the database and application server until they are timed out.
If I use Andrew's code then the user will be prompted to continue to close or go back, if they click Cancel to go back then focus returns to the forms application and the user can continue to work. If the user clicks OK then the window closes and unfortunately their sessions are still lost until timed out.
So what I desire is to add to Andrew's code to check if the embedded applet is still running and prompt the user to close or not accordingly.
Something like:
Basejini.htm like
</HEAD>
<SCRIPT LANGUAGE="JavaScript">
function maximizeWindow()
window.moveTo(0,0);
window.resizeTo(screen.availWidth,screen.availHeight);
function confirm(){
If(document.embeddedapplet.closed())
Win.opener = self;
win.close();
Else if
event.returnValue = "Closing Forms Application. OK to continue?";
</SCRIPT>
<BODY %HTMLbodyAttrs%, onload="maximizeWindow()", onbeforeunload="confirm()">
%HTMLbeforeForm%
I hope this explains my requirements.
David
From: Oracle, Evelene Raechel 10-Oct-05 06:45
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Hi,
Note.199928.1 How to Alert User on Closing Client's Browser Window in Webforms
Regards,
Rachel
From: David Wilton 11-Oct-05 17:40
Subject: Re : How to tell embedded jinitator applet is still running when window closed
I'm sorry this is not helpful at all.
Note 199928.1 is only an alert which does not stop the closing of the window and still displays as an alert if the user does close properly using exit form ... so why would you want to display the alert then?
This is exaclty what I do not want and why I want to determine if the applet is still running before displaying any kind of message.
David
From: Oracle, Evelene Raechel 17-Oct-05 12:23
Subject: Re : How to tell embedded jinitator applet is still running when window closed
Closing thread.
Thanks,

Hello,
I had the same issue last year - wanting to provide a warning on closing the browser, but only if the Forms session is still running. The approach I took is described below, see also the thread where I originally posted this at Closing brower window
Hi there,I've had a similar requirement - or rather, the two conflicting requirements: to warn when the browser is being closed, but for the app to be able to close the browser without a warning being fired.
To always provide a warning when someone (the user or the Forms app) tries to go to a different page (e.g. your close.htm), use Javascript like:
function confirmExit(){
if(appletRunning==true) {
msg="Closing this window or navigating to another page will end your SomeGreatApp session.";
window.event.returnValue=msg;
And make a call to confirmExit() in the onBeforeUnload event of your main page.
You'll notice I first check an 'appletRunning' variable before displaying the warning. This Javascript variable is set to true by my app when it starts up, using an embedded Javabean that calls out to Javascript. Once that variable is set to true, then the warning will be displayed if the user tries to shut the browser by clicking on the 'x' button, or to go to a different URL.
When my app is shutting down, it uses the same Javabean to set appletRunning back to false. It then navigates to a close.htm - which will be done without a warning being displayed.
See Re: How can a Javabean call Javascript function of the basejpi.html?? for example code on how to call Javascript from a bean embedded in your Forms app.
Hope these ideas help you out, it's worked for me (so far, anyway!!)
James

Firefox does not "close" when closed under Windows 7; Task Manager must be used to "End Process." How do I close Firefox and reopen it without getting a "Still Running" error message?

Even though Firefox has been updated multiple times (currently using Ver. 3.6.13) since I started using Windows 7, I am still unable to totally close it from the toolbar or taskbar. Firefox does closeout on the screen but apparently continues to run in the background. If I open Firefox at a later time, I get an error message stating that Firefox is still running. I then have to go Task Manager to "End Process." Electing to do so allows me to restart Firefox. I never had this problem with Firefox when using Windows XP and I never have this problem with any other software under Windows 7.

https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit

Once I close all windows and try to open another I get a message saying"Firefox is still running, you must close all browers before opening a new window. Why is this happening? I have the 3.5.10 Version

I close all Firefox windows. When I try to open another window later I get a message telling me that Firefox is still running and that I need to close all windows or restart my computer. I have this about 3 times a day this past week but prior to that it was maybe every one or 2 weeks. I had the 3.5.10 Version of Firefox, but have just updated to see if this stops this from happening. But what do I do if it doesn't stop it?

There are a few possible causes for that error, for details see [[Firefox is already running but is not responding]]

CCA9 DELTA STILL RUNNING

Similar Messages

Maybe you are looking for