CcBPM - Block Start and End (New Transaction or No New Transaction) ?

Hi,
Could you help to explain what is the purpose of this properties in Block Step
- Block Start and Block End.
Thank you and Best Regards
Fernand

Hi,
The option of defining the start or end of a block as the boundary of a transaction. For more details read this.
http://help.sap.com/saphelp_nw04/helpdata/en/45/058023846b2460e10000000a1553f7/content.htm
Regards,
Sarvesh

Similar Messages

  • How to find START and END block number in a datafile?

    Hi Guys,
    I am trying to use dbverify utility with "start" and "end" flags in it. How can I find the starting block # and ending block # of a datafile. I checked v$datafile query but its not very helpful. Any help would be appreciated.
    MM

    If you mean used blocks, then check out DBA_EXTENTS

  • Start and end balance per month

    Hello,
    I am new in building formulas.
    I have the following values in in my table, I would like to find out the start and end balance for month Jan and Feb.
    Table: Transactions
    Date
    Balance
    02/Jan/2014
    100
    05/Jan/2014
    150
    25/Jan/2014
    120
    09/Feb/2014
    180
    14/Feb/2014
    200
    16/Feb/2014
    100
    22/Feb/2014
    190
    Table: Results
    Jan
    Feb
    Start balance
    100
    180
    End balance
    120
    190
    Can you please help with the simplest formula to get the above result?
    I don't know when the first and last transaction will occur in a certain month. Also I don't know the total number of transactions per month.

    I would like to find out the start and end balance for month Jan and Feb.
    Assuming you are looking for the starting and ending balance for each month, and not the maximum and minimum balance, then you could do something like this:
    Add an Index column to your Transactions table that extracts the month name with this formula in C2, copied down:
       =MONTHNAME(MONTH(A2))
    (I first had to change the format of the dates in column A so Numbers would recognize them as dates on my machine.
    In the results table I made sure I entered January and February as text, by typing an apostrophe (single quote) and typing the month name.  Otherwise Numbers smart date recognition will try to turn the month name into a date. (Note I used the full month name rather than an abbreviation.)
    The formula in B2 of the Results table, copied to C2, is:
        =INDEX(Transactons::$B,MATCH(B$1,Transactons::$C,0))
    The formula in B3 of the Results table, copied to C3, is :
         =INDEX(Transactons::$B,MATCH(B$1,Transactons::$C,1))
    The INDEX MATCH combination is a flexible alternative to the LOOKUP, VLOOKUP family of functions. Here changing the last parameter in MATCH does the trick for finding the start and end balance.
    SG

  • Problem with keyframe effect - at start and end (crop and scale)

    I'm having this odd problem with keyframe effects.
    Setup:
    I have a gif image that I have on video 1 for say 2 minutes.
    I have my real video on video 2.  It is a person talking.
    First I start with my video full size on top of video 1.
    Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
    My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
    I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way.  Its only a couple of frames but it's really unacceptable for the finished video.
    Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes.  My move from start to end of the effect runs for about 4-6 seconds.
    Any ideas?

    Bill,
    Here is more detail and screen captures.
    Concept:
    I have 3 minutes of video.  It contains a person making a speech.  During parts of the speech I want to reveal a graphic image that will be discussed.  The speech will begin with the speaker full screen.  Half way in, the speaker will shrink down to 45% in the lower left corner of the screen.  While the animation occurs (the shrink, move and cropping) it will reveal the graphic below.  The graphic will take up the full screen with the speaker at 45%.
    Technique:
    I put the video in Video 2 and the graphic, a GIF image in Video 1.  The scene begins with the speaker talking at full screen.  After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides.  The animation occurs over approximately 8 seconds.
    I am manually adding keyframes at the start and end of the animation.  I set the ending state of the video image in the end keyframes.  The interpolation between these start and end keyframes should be managing the animation.
    Problem:
    At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems.  On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below.  On other frames, the video image turns black with horizontal red bands half way across.
    Troublshooting:
    I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
    I have added a few screen shots.
    1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
    At 1:40:16 the video image completely disappears only showing the GIF below.
    At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
    Let me know if you need anything else.
    Thanks!
    Evan

  • Report for Validity Start and End Date in PO

    Dear All
    Is there any report where I can get PO validity start and end date which user input in addtional data header tab of PO?
    Regards
    Satish Kumar

    Hi,
    Yes, It is available standard report using T-code ME2N - Purchasing Document (PO) Per Document Number, enter the T-code and provide the following input data's are as follows.
    Scope of List                 :  ALV ( for Ms-Excel format report)
    Plant                               :   __________ to __________ (if required)
    Document Date              : ____________ to ___________ (if Required)
    Execute the report shown by default in excel format and if required PO validity start and end data, you have to select Change Layout button and open new window options screen right side field option as Validity Per.Start, Validity Period End, Commutative number field data's are selected and click <--- arrow button and then click bottom tick marked button. Now, the report shown your requirement.
    Hope, it is useful for you,
    Regards,
    K.Rajendran

  • How do I stop calendar inserting 'starts' and 'ends'

    I have recently bought a new laptop ( OS Yosemite version 10.10.2) and find the automatic entering of 'starts' and 'ends' times on my entries in calendar very irritating.
    How do I stop it doing this ?
    The previous version I used did not do this automatically by default.

    I had the Integrated Gmail 2.5.5 addon enabled.
    After disabling the addon the problem is gone.
    Hope it works to you guys.

  • How can I make a brush that starts and ends in a thin line?

    I am looking to make a brush that I can use for cartooning in CS6 that starts out thin, gets thicker with pressure (I have a cintiq), and ends in a thin line. Does anyone have the expertise to make one?
    Thank you.

    I watched the first half of the tutorial from your link and some parts of the rest. It is a good tutorial. He is using an art brush which profile was created from an elliptical shape with sharp corners which gives that ink kind of appearance which is good for this kind of style. Most of the time though I prefer the appearance of the rounded ends of the calligraphic brushes. Also one advantage of the calligraphic brushes is that it can change its size or the size of the selected strokes with the [ and ] keys on the keyboard while with the art brushes this is done by changing the stroke weight which also can change the weight of calligraphic brushes in addition to the [ and ] keys.
    Like in the tutorial I often use a similar workflow ending up with the brush strokes converted to filled paths but I simply use expand appearance then remove the unwanted parts with the Eraser brush which can be made pressure sensitive in the options that you get when double clicking the Eraser tool. This is less precise than the technique the guy is using in the video tutorial but it is quick, I like  the hand touch appearance of the imperfections, and it also allows me to paint the white (transparent) highlights like for example the highlights on the booths of my cowboy. The Blob brush is the tool above the Eraser in the Tool panel and works basically the same like the Eraser but it adds to the fill of a path and it also has these and more options when you double click it. I use it most of the time in a combination with the Eraser to add or remove final details of illustrations started initially with brush strokes and then expanded. And like in the video tutorial I also like to keep a copy with the stage before expanding the brush strokes in case I need some changes on brush stroke level.
    I also use a different technique for adding new color fills on the illustrations instead of cutting paths with the knife. I don't like the knife because I often do not like the first cut which I may realize later when undo is not the best workflow. What I do is copy paste in front the path and use the pencil tool set to edit the selected paths and change the shape of the selected path similar to using the knife but the pencil has to start and end on the path. The advantage of this for me is that the new fill with the different color is overlapping the original fill behind and when later I decide to change its shape I don't get gaps between the two colors which is what will happen if the knife was used.

  • XML document structures must start and end within the same entity

    Hi there,
    I'm working with a client/server application and using SaxParser for reading in xml. I get the SaxParserException: XML document structures must start and end within the same entity. I understand what that means, but it isn't applicable! The xml data being used is well-formed. I checked the well-formedness with Stylus Studio to make sure. Here's the data:
    <?xml version='1.0' encoding='UTF-8'?>
    <vcmessage>
         <vcsource>3</vcsource>
         <processevent>16</processevent>
         <shape>
              <llindex>0</llindex>
              <shapetype>9</shapetype>
              <shapeproperties>
                   <shapelocation>
                        <xcoord>54</xcoord>
                        <ycoord>184</ycoord>
                   </shapelocation>
                   <bounds>
                        <width>24</width>
                        <height>24</height>
                   </bounds>
                   <fgcolor>
                        <fgred>0</fgred>
                        <fggreen>0</fggreen>
                        <fgblue>0</fgblue>
                   </fgcolor>
                   <bgcolor>
                        <bgred>255</bgred>
                        <bggreen>255</bggreen>
                        <bgblue>255</bgblue>
                   </bgcolor>
                   <thickness>1</thickness>
                   <isfilled>false</isfilled>
              </shapeproperties>
         </shape>
    </vcmessage>The parser generally stops around the </bgcolor> tag.
    I'm using Eclypse as my IDE. I'm wondering if there's something wrong with it? Or maybe there's something wrong with the class I'm using for reading in the XML? Followng is the class.
    Please advise,
    Alan
    package vcclient;
    import java.io.*;
    import org.xml.sax.*;
    import org.xml.sax.helpers.*;
    import javax.xml.parsers.*;
    public class XMLDocumentReader extends DefaultHandler
      private VCClient client = null;
      private Writer out;
      private String lineEnd =  System.getProperty("line.separator");
      private boolean haveSourceType = false;
      private boolean haveUserName = false;
      private boolean haveMessage = false;
      private boolean haveProcessEvent = false;
      private boolean haveLinkedListIndex = false;
      private boolean haveOpeningShapePropertiesTag = false;
      private boolean haveShapeType = false;
      private boolean haveOpeningShapeLocationTag = false;
      private boolean haveShapeLocation = false;
      private boolean haveOpeningXCoordTag = false;
      private boolean haveOpeningYCoordTag = false;
      private boolean haveOpeningBoundsTag = false;
      private boolean haveBoundsWidth = false;
      private boolean haveBoundsHeight = false;
      private boolean haveOpeningFGColorTag = false;
      private boolean haveOpeningBGColorTag = false;
      private boolean haveOpeningThicknessTag = false;
      private boolean haveOpeningIsFilledTag = false;
      private boolean haveOpeningImageDataTag = false;
      private boolean haveOpeningTextDataTag = false;
      private boolean haveFGRed = false;
      private boolean haveFGGreen = false;
      private boolean haveFGBlue = false;
      private boolean haveBGRed = false;
      private boolean haveBGGreen = false;
      private boolean haveBGBlue = false;
      private boolean haveThickness = false;
      private boolean haveIsFilled = false;
      private boolean haveImageData = false;
      private boolean haveTextData = false;
      private VCMessage vcmessage = null;
      public XMLDocumentReader(VCClient value)
           client = value;
           vcmessage = new VCMessage();
      public VCMessage getVCMessage()
           return vcmessage;
      public boolean haveSourceType()
         return haveSourceType; 
      public boolean ParseXML(InputStream stream)
         boolean success = false;
         // Use the default (non-validating) parser
        SAXParserFactory factory = SAXParserFactory.newInstance();
        try
             // Set up output stream
            out = new OutputStreamWriter(System.out, "UTF-8");
            // Parse the input
            SAXParser saxParser = factory.newSAXParser();
            saxParser.parse( stream, this );
            success = true;
        catch (SAXParseException spe)
            // Error generated by the parser
            System.out.println("\n** Parsing error"
               + ", line " + spe.getLineNumber()
               + ", uri " + spe.getSystemId());
            System.out.println("   " + spe.getMessage() );
            // Unpack the delivered exception to get the exception it contains
            Exception  x = spe;
            if (spe.getException() != null)
                x = spe.getException();
            x.printStackTrace();
            return success;
        catch (SAXException sxe)
             // Error generated by this application
             // (or a parser-initialization error)
             Exception  x = sxe;
             if (sxe.getException() != null)
                 x = sxe.getException();
             x.printStackTrace();
             return success;
        catch (ParserConfigurationException pce)
            // Parser with specified options can't be built
            pce.printStackTrace();
            return success;
        catch (Throwable t)
             t.printStackTrace();
             return success;
        return success;
      public void startDocument()throws SAXException
          emit("<?xml version='1.0' encoding='UTF-8'?>");
          nl();
      public void endDocument()throws SAXException
          try {
              nl();
              out.flush();
          } catch (IOException e) {
              throw new SAXException("I/O error", e);
      public void startElement(String namespaceURI,
                               String lName, // local name
                               String qName, // qualified name
                               Attributes attrs)throws SAXException
          String eName = lName; // element name
          if (eName.equals(""))
             eName = qName; // namespaceAware = false
          emit("<"+eName);
          if (attrs != null) {
              for (int i = 0; i < attrs.getLength(); i++) {
                  String aName = attrs.getLocalName(i); // Attr name
                  if (aName.equals("")) aName = attrs.getQName(i);
                  emit(" ");
                  emit(aName + "=\"" + attrs.getValue(i) + "\"");
          emit(">");
          if(makeStartTag(eName).equals(Constants.OPENING_SHAPEPROPERTIES))
                haveOpeningShapePropertiesTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_SHAPELOCATION))
              haveOpeningShapeLocationTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_BOUNDS))
                haveOpeningBoundsTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_FGCOLOR))
                 haveOpeningFGColorTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_BGCOLOR))
              haveOpeningBGColorTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_BGGREEN))
               System.out.println("See BGGreen");
          else if(makeStartTag(eName).equals(Constants.OPENING_BGBLUE))
               System.out.println("See BGBlue");
          else if(makeStartTag(eName).equals(Constants.OPENING_THICKNESS))
              haveOpeningThicknessTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_ISFILLED))
              haveOpeningIsFilledTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_IMAGEDATA))
              haveOpeningImageDataTag = true;
          else if(makeStartTag(eName).equals(Constants.OPENING_TEXTDATA))
              haveOpeningTextDataTag = true;
      public void endElement(String namespaceURI,
                             String sName, // simple name
                             String qName  // qualified name
                            )throws SAXException
           if(sName.equals("") && !qName.equals(""))
              sName = qName;
              emit("</"+sName+">");
           else
              emit("</"+sName+">");
           if(makeEndTag(sName).equals(Constants.CLOSING_SOURCE_TYPE))
              haveSourceType = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_USER))
              haveUserName = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_MESSAGE))
              haveMessage = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_PROCESSEVENT))
               haveProcessEvent = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_LINKEDLISTINDEX))
               haveLinkedListIndex = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPETYPE))
               haveShapeType = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPELOCATION))
                haveOpeningShapeLocationTag = false;
           else if(makeEndTag(sName).equals(Constants.CLOSING_WIDTH))
               haveBoundsWidth = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_HEIGHT))
               haveBoundsHeight = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_BOUNDS))
                haveOpeningBoundsTag = false;
           else if(makeEndTag(sName).equals(Constants.CLOSING_FGRED))
               haveFGRed = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_FGGREEN))
               haveFGGreen = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_FGBLUE))
               haveFGBlue = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_FGCOLOR))
                haveOpeningFGColorTag = false;
           else if(makeEndTag(sName).equals(Constants.CLOSING_BGRED))
               haveBGRed = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_BGGREEN))
             haveBGGreen = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_BGBLUE))
               System.out.println("See closing BGBlue");
               haveBGBlue = true;
           else if(makeEndTag(sName).equals(Constants.CLOSING_BGCOLOR))
                haveOpeningBGColorTag = false;
           else if(makeEndTag(sName).equals(Constants.CLOSING_THICKNESS))
               System.out.println("XMLDocumentReader: Step2");
                haveOpeningThicknessTag = false;
           else if(makeEndTag(sName).equals(Constants.CLOSING_ISFILLED))
               haveOpeningIsFilledTag = false;
           else if(makeEndTag(sName).equals(Constants.CLOSING_IMAGEDATA))
               haveOpeningImageDataTag = false;
           else if(makeEndTag(sName).equals(Constants.CLOSING_TEXTDATA))
               haveOpeningTextDataTag = false;
      private String makeStartTag(String tag_name)
           String start = "<";
           String end = ">";
           return start.concat(tag_name).concat(end);
      private String makeEndTag(String tag_name)
           String start = "</";
           String end = ">";
           return start.concat(tag_name).concat(end);
      public void characters(char buf[], int offset, int len)throws SAXException
           String s = new String(buf, offset, len);
          if(haveSourceType == false)
               if(vcmessage.getSourceType() == null)
                  try
                    if(s.equals(""))return;
                   int sourcetype = Integer.parseInt(s);
                   vcmessage.setSourceType(sourcetype);                            
                  catch(NumberFormatException nfe){}
          else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE)
            if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveUserName == false)
                 vcmessage.setUserName(s);          
            else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveMessage == false)
               //When the parser encounters interpreted characters like: & or <,
               //then this method gets invoked more than once for the whole message.
               //Therefore, we need to concatonate each portion of the message.  The
               //following method call automatically concatonates.
               vcmessage.concatMessage(s);                    
          else if(vcmessage.getSourceType() == SourceType.WHITEBOARD_SOURCE)
               if(haveProcessEvent == false)
                 try
                   vcmessage.setProcessEvent(Integer.parseInt(s));
                 catch(NumberFormatException nfe){}
               else if(haveLinkedListIndex == false)
                    try
                       vcmessage.setLinkedListIndex(Integer.parseInt(s));
                     catch(NumberFormatException nfe){}
               else if(haveShapeType == false)
                    try
                       vcmessage.setShapeType(Integer.parseInt(s));
                     catch(NumberFormatException nfe){}
               if(haveOpeningShapePropertiesTag)
                    if(haveOpeningShapeLocationTag)
                         if(haveOpeningXCoordTag)
                              try
                                vcmessage.setXCoordinate(Integer.parseInt(s));
                              catch(NumberFormatException nfe){}
                         else if(haveOpeningYCoordTag)
                              try
                                vcmessage.setYCoordinate(Integer.parseInt(s));
                                //reset all flags for ShapeLocation, X and Y coordinates
                                haveOpeningXCoordTag = false;
                                haveOpeningYCoordTag = false;
                                //haveOpeningShapeLocationTag = false;
                              catch(NumberFormatException nfe){}
                    else if(haveOpeningBoundsTag)
                         if(haveBoundsWidth == false)
                              try
                                vcmessage.setBoundsWidth(Integer.parseInt(s));
                              catch(NumberFormatException nfe){}
                         else if(haveBoundsHeight == false)
                              try
                                vcmessage.setBoundsHeight(Integer.parseInt(s));
                                //reset flag
                                //haveOpeningBoundsTag = false;
                              catch(NumberFormatException nfe){}
                    else if(haveOpeningFGColorTag)
                         if(haveFGRed == false)
                              try
                                vcmessage.setFGRed(Integer.parseInt(s));                           
                              catch(NumberFormatException nfe){}
                         else if(haveFGGreen == false)
                              try
                                vcmessage.setFGGreen(Integer.parseInt(s));                           
                              catch(NumberFormatException nfe){}
                         else if(haveFGBlue == false)
                              try
                                vcmessage.setFGBlue(Integer.parseInt(s));
                                //reset flag
                                //haveOpeningFGColorTag = false;
                              catch(NumberFormatException nfe){}
                    else if(haveOpeningBGColorTag)
                         if(haveBGRed == false)
                              try
                                vcmessage.setBGRed(Integer.parseInt(s));                           
                              catch(NumberFormatException nfe){}
                         else if(haveBGGreen == false)
                              try
                                vcmessage.setBGGreen(Integer.parseInt(s));                           
                              catch(NumberFormatException nfe){}
                         else if(haveBGBlue == false)
                         {   System.out.println("getting BGBlue data");
                              try
                                vcmessage.setBGBlue(Integer.parseInt(s));
                                //reset flag
                                //haveOpeningBGColorTag = false;
                              catch(NumberFormatException nfe){}
                    else if(haveOpeningThicknessTag)
                         try
                            vcmessage.setThickness(Integer.parseInt(s));                       
                          catch(NumberFormatException nfe){}
                    else if(haveOpeningIsFilledTag)
                         vcmessage.setIsFilled(s);
                    else if(haveOpeningImageDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
                         vcmessage.setBase64ImageData(s);                    
                    else if(haveOpeningTextDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
                         vcmessage.setTextData(s);
                    //reset
                    haveOpeningShapePropertiesTag = false;
          emit(s);
      //===========================================================
      // Utility Methods ...
      //===========================================================
      // Wrap I/O exceptions in SAX exceptions, to
      // suit handler signature requirements
      private void emit(String s)throws SAXException
          try {
              out.write(s);
              out.flush();
          } catch (IOException e) {
              throw new SAXException("I/O error", e);
      // Start a new line
      private void nl()throws SAXException
          try {
              out.write(lineEnd);
          } catch (IOException e) {
              throw new SAXException("I/O error", e);
      //treat validation errors as fatal
      public void error(SAXParseException e)
      throws SAXParseException
        throw e;
      // dump warnings too
      public void warning(SAXParseException err)
      throws SAXParseException
        System.out.println("** Warning"
            + ", line " + err.getLineNumber()
            + ", uri " + err.getSystemId());
        System.out.println("   " + err.getMessage());
    }

    Just out of curiosity what happens if you append a space to the end of the XML document?

  • Converting to ProRes changes Media Start and End

    I have a series of clips that were incorrectly all captured Uncompressed.
    Primarily to save on space, I need to convert them to ProRes.
    Using Compressor, I drop the clips in and use one of the preset settings for High Quality Progressive ProRes and convert. The conversion works great.
    However, after I replace the clips with the new slimmer versions, when I start FCP up and reconnect them, it tells me that the Media Start and End changed. Indeed, when I look at the Uncompressed and ProRes version in FCP, they do not have the same Media Start and End values.
    Can anyone help me understand what is going on here? How is the conversion changing these values?
    Or better yet, provide me with a better workflow for converting all these clips to ProRes so FCP does not have a fit?
    Thanks,
    Dean

    To keep the same timecode, you have to use the Media Manager and RECOMPRESS.
    Shane

  • BT Broadband Contract Start and End Date

    Where can I find my contract start and end date online ?

    conrad wrote:
    You can, by starting a new order for BB and entering phone no + post code - no need for email address - you then go to choose a package page which shows your current package  details at the top of the page
    Obviously you don't need to go any further than that page
    Conrad, thank you for your suggestion. I gave your suggestion a try but initially got a technical error and then appeared to be getting closer and closer to completing an order without the required information coming up so I chickened out. This also was fraught with difficulty as the cancel button seemed ineffective.
    I think I may have to use imjolly suggestions.

  • Schedule type LineChart with clients and unavailable start and end dates

    I have been working on trying to get something in flex which will display a list of clients and their unavailability start and end dates.   I have attempted the line chart and the HLOC chart but have not seen success.  I do have the H or V grids working fine.  But getting the data to display in a line graph based upon start date and end date has been my challenge.  any suggestions
    Current Code:
        <s:Label x="0" y="5" text="Min Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
        <mx:DateField id="minDateField"
                      x="50" y="5"
                      formatString="MM-DD-YYYY"
                      selectedDate="{minDate}"
                      change="minDatefield_changeHandler(event)"/>
        <s:Label x="150"  y="5" text="Max Date" height="24" fontFamily="Times New Roman" verticalAlign="middle"/>
        <mx:DateField id="maxDateField"
                      x="200" y="5"
                      formatString="MM-DD-YYYY"
                      selectedDate="{maxDate}"
                      change="maxDatefield_changeHandler(event)"/>
        <mx:LineChart id="nonAvailsLC" x="0" y="40"
                      showDataTips="true"
                      dataProvider="{getNonAvailsResult.lastResult}"
                      creationComplete="nonAvailsLC_creationCompleteHandler(event)"
                      width="890" height="550">
            <mx:backgroundElements>
                <mx:GridLines gridDirection="both"/>
            </mx:backgroundElements>
            <mx:horizontalAxis>
                <mx:DateTimeAxis dataUnits="days" minimum="{minDate}" maximum="{maxDate}"
                                 labelUnits="days"/>
            </mx:horizontalAxis>       
            <mx:verticalAxis>
                <mx:CategoryAxis categoryField="user" labelFunction="getName"/>
            </mx:verticalAxis>       
            <mx:series>
                <mx:LineSeries xField="startDate" yField="user"
                               form="horizontal"/>
            </mx:series>
        </mx:LineChart>

    I guess I still have lots to learn about Flex and Renderers. I downloaded a Gantt chart with Code and they used the AdvancedDataGrid with renderers and such.  I modified the code to work for me. but if I had to create it myself right now, I would be in trouble.  Lots more to learn.

  • Problems with replace file name with starting and ending Bates number

    When applying Bates numbers to a set of Acrobat pdf files I am unable to replace file names with the starting and ending Bates number. This is important
    for me in a legal application.
    The Bates numbers are applied to each page of each of file without any problem as required.
    The Bates log file indicates that the files have been renamed as I wanted.
    I am running Adobe Acrobat Professional 9 with the update to 9.1.9 and Windows XP Service Pack 3 (the last or current service pack)
    In all other respects Adobe Acrobat 9 is running to my satisfaction.
    Has anyone else had this problem and found a solution?
    HRKExon

    Thanks for asking the question, I hadn't heard of Bates numbers before and this gave me a chance to look up something new.
    When I googled for ' bates number legal index ' I found this document:
    http://www.adobe.com/devnet/acrobat/pdfs/batesnumbering9.pdf
    Maybe that will help.
    Scott Bonacker CPA
    Springfield, MO

  • How can I control the video playback start and end time?

    I'd like to be able to start a video/audio playback at a particular point in time say 3 seconds from the starts of the video and play it for only 3 seconds. How can I set the unique start and end points rather than play the whole video. I'd also like to be able to do this using the SeriesElement so I can set the start and end play points for a series of stacked videos. How can this be achieved?

    Not sure I understand the question.  Can't you just append the param to the URL?  Like so:
    var url = new URL("http://video-research/video.f4v?start_time=500");
    If your question is more about playing a subclip of a progressive video, that's not something OSMF has support for.  You'd need to write a server script which checks for that parameter and then returns the relevant portion of the requested file.  (This is typically referred to as "pseudo-streaming", if you Google that term you'll find a wealth of info.)

  • How to change both start and end dates for an business event (or any object

    Hi all.
    We are in the case to change the validity dates for several business events in training management.
    The special point is that both, start and end date, have to be changed.
    In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
    So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
    Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
    Is there any better solution for this?
    Thanks in advance for your help.
    Best regards.

    Hi,
    I gueass the best solution is to use PV1A t-code.
    You can write an LSMW for this t-code if the number of business events to be maintained is huge.
    Regards,
    Dilek

  • Hwo to obtain the DST start and end times

    Hi all -
    Is there a way in java to obtain the day light saving start and end times for a certain year for US?
    I know that US DST changed in the year 2007 so, I am wondering if I can get correct DST start and end times for certain period before 2007 and after 2007.
    I read online that JDK preserves historical DST rules so I am hoping this is possible but do not know how.
    Thanks,

    Any idea is appreciated [otehr than incrementally iterating through each hour of the year to know the transition time !!!!  )
    That's why I mentioned +dichotomy+ (EDIT: the english wording is +binary search+ ): set the initial date to Jan 1st, 00:00, then add 183x24 hours (half a year), if the hour has changed (which it will), there was a DST change in the first half of the year. Then substract 92x24 hours (a quarter of a year) from this new instant, if the hour has changed, the DST change was in the 2nd quarter, else it was in the first. Then add or substract 46x24 hours,... and so onEdited by: jduprez on Feb 2, 2011 9:15 AMWARNING: for anyone reading this in the future: this algorithm is flawed, unless there is further guarantees in the problem domain of DST rules:- if the DST shifts (up +1 hour then back) are less than 6 months apart (obviously it may occur, with a one day margin)- and if in some odd timezone DST shifts may occur around mid-yearThen the first binary chop could find the same hour at both ends, and miss both shifts.My apologies for posting not-well-thought suggestions...                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for