CcBPM - process stopped and SXMB_MONI_BPE without entries

Hello,
We have a strange behaviour of ccBPM on SAP PI 7.01.
Sometimes ccBPMs are not working properly.
So e.g. process is not started or in SXMB_MONI_BPE showing that a wrong lane after a switch is started.
Usually we could resolve that by reimporting the Int.process from the Repository or by adding a dummy container step.
But now the behaviour is really strange (but only for one of 6 ccBPMs implemented. So 5 are running fine)
a) ccBPM is not started, only SXMB_MONI shows the step to start the BPM as successful.
(After doing a small change in the ccBPM, which was tested successfully the week before).
b) Adding a dummy step (simply container with an append) enables the process to start.
Test for switch lane 1 is successful
Test for switch lane 2 fails. SXMB_MONI_BPE shows that switch lane 1 is choosen.
But the comm.channel monitor shows that the first step in switch lane 2 was started successfully.
(Connect via JDBC to select data)
c) Adding another container dummy step in switch lane 2 and reimporting the int.proc. into Int.Dir. results in:
SXMB_MONI shows all steps up to switch lane 2 step one (select of data)
-> SXMB_MONI does not show any entries for the started ccBPM.
d) Removing all dummy steps does not change the situation.
So at the end we deleted the implementation of the Int. process and rebuild all the objects using new names for the Int.Proc and its Config.Scenario.
Is there anybody with similar experience for such strange behaviour.
Best Regards
Dirk

Hi Heiko,
Check the OSS note 1126656 - BPE-TS: Permanent errors in the BPE inbound processing
In parrallel goto TCODE "SWF_XI_CUSTOMIZING".
Check whether ,any errors are there.
All entries related workflow or integration process should be with out any errors and active.
Regards,

Similar Messages

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203

Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform. The App Store shows there is an upgrade, so I click the download button. After about 2 hrs the process stops and an Error (102) appears on the screen. Any idea what goes wrong? THX

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THX

ahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering.

TS3048 My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey is ask the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook .

My MacBook OSX 10.6.8 detects the wireless keyboard apple A1255 but once the passkey step show on the screen the "pairing" process stops and displays a warning saying it was unsuccessful. Bateries are new on the keyboard and it has been paired to this MacBook before. Mouse, iphone and other bluertooth devices have no problem pairing via bluetooth. Any suggestions where to look?

I read somwhere that firefox disables certain versions of java because it might give control of your computer to other malicious websites
I think you have to go to the java website and down load the version you need and enable it in firefox's prefrences
Sorry I may be a veteran in using firefox, but I know very little since I hardly had problems with mozilla untill just very recently hope this helps

HT201250 The initial backup is taking 2 days. Can I stop and restart without any issues?

Just got an iomega external hard disk backup and the initial backup is said to take two days. Can I stop and restart without any issues?

On a big backup, the initial estimate is often wrong and gets better after a little while. But, yeah, there is a "Stop backing up" command in the Time Machine menu, right? That is safe as far as I know.
charlie

My i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch

my i-touch music is interrupted by voice memo. the music also fast forwards, changes tracks or stops and starts without touching the i-touch. can you help?

Try the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defauslts/new iPod.

When I "share" to DVD the file is transcoded. When it reaches 66% it starts to "finishing", but the process stops and does not proceed beyond 66%. When I stop the sharing process I receive the following message "the share operation dvd has failed".

When I "share: to DVD the file is transcoded. When the sharing process gets to 66%, it changes to "finishing" "CreateDVD:waiting fro create disk to finish. The sharing process does no go beyond 66%, and when I stop the sharing process, I receive the message "the share DVD operation has failed."
Is this a problem with FCPX or Create DVD? How can this problem be resolved?

The handshake between FCP and a hidden app called Create Disk wasn't completed.
Try this. Select a short range and Share>DVD. In Output Settings. set it to Hard Drive to save as a disk image. (Save to your Desktop so you can find it.) For menu Background, click the Add button, then cancel. That is often enough to wake up the disk burning part of this process. If it makes a disk image, try a physical disk.
Russ

Warp Stabilizer analysis process stopping and never ends (AE CC 2014)

I'm running the latest 2014 AE CC and I've been getting this issue running Warp Stabilizer on my clips. Intermittently, warp stabilizer analysis process would stop at certain frame and never ends. I have to quit / kill AE.
I'm running AE on 15" retina macbook pro 2013 with dedicated nvidia 750M video card, 16GB of RAM and plenty of disk space (over half a terabyte left), running Yosemite 10.10.2.
Has anyone experienced this? How do I solve this issue?

"During the analysis and solving stages, the Warp Stabilizer effect and 3D Camera Tracker effect use memory outside of the pool shared by After Effects and Premiere Pro. Therefore, you can allocate more memory to the analysis and solving phases for these effects by increasing the RAM Reserved For Other Applications value in the Memory & Multiprocessing preferences."
Thank you for that link. I'm going to check the "RAM Reserved For Other Applications" and increase the value if it's too low.

Trying to download new software and it goes through whole process, stops and says "error...check network connectivity" although I am online.

Is anyone else having trouble downloading the newest software update for the iphone? I have tried to run it several times, only to keep getting the error message. I am online and it is telling me the network has timed out.

Start by working through the suggestions in this Apple support document. The cause could be any AntiVirus or Security you have installed and running on your system.
http://support.apple.com/kb/ts3125
B-rock

I am unable to update my iPhone from ios4 to ios7, I know you have to do this via the computer however the backing up process stops part way through and it is unable to carry on

I have ios4 on my iPhone 4 and I have tried to update it to ios7 and to do this I know you have do use the computer. however part of the way through, the back up process stops and nothing else happens

I would suggest that you tru and update through iTunes on your computer. Also, could you connect your computer up to the internet using a wired connection rather than wireless - this will be faster and more reliable, particularly when you need to download a large file.
Then try your update. This time, in iTunes, why not try to get it to download the sofware first (Download Only). You can then appy it to your iPhone later, once it has downloaded.

Half way through a recording it stops and I get a can't process message?

I forget exactly what the message says but it has something to do with the processing. The recording process stops and the message pops up.
Can somebody at least point me in the right direction in the manual or tell me what to do. Do I need to clear something out or up the memory or what?
Thanks

Hi Kathshirls,
Thanks for visiting Apple Support Communities.
In addition to the article above, the steps in this article can help with troubleshooting your iPhone if you can't hear and can't be heard while on a call:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
All the best,
Jeremy

Boot stops and F2 requires clicking to proceed and sound doesn't work

I recently updated my 3000 J205 desktop to Win 7..generally works Ok but on booting up the process stops and informs me that I need to press F2 to continue or F1 for setup. I've gone into setup and the boot order seems OK..(HD first)
Also I cannot get sound to work..I hear the beeps at boot up but nothing thereafter.
Mac

For your sound you may want to check this site..
http://www.ma-config.com/en/services/60_find-the-drivers.html ..
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Stop managed server without node manager and admin server

What are the commonly used ways to stop managed Weblogic server without node manager running and without administration server running?
(I have only one solution: on the managed server startup dump process ID to a file, and then when I want to stop it, send a signal to this process ID and kill JVM. But it seems not very clean way.)
(The managed server is started when both node manager and admin server are down, and I provide boot.properties of admin server to the managed server to start.)
UPDATED: And I don't want to start neither admin server, nor node manager even temporarily.
Edited by: user12163080 on Jun 24, 2010 4:40 AM

Hai,
I read the Oracle weblogic wlst script document without Admin server you cannot connect the managed server through the WLST script. see the below lines
"The start command starts Managed Servers or clusters in a domain using Node Manager.
To use the start command, WLST must be connected to a running Administration Server.
To start Managed Servers without requiring a running Administration Server, use the
nmStart command with WLST connected to Node Manager."
"You shut down a server to which WLST is connected by entering the shutdown command
without any arguments.
When connected to a Managed Server instance, you only use the shutdown command to shut
down the Managed Server instance to which WLST is connected; you cannot shut down another
server while connected to a Managed Server instance.
WLST uses Node Manager to shut down a Managed Server. When shutting down a Managed
Server, Node Manager must be running.
In the event of an error, the command returns"
They are two option if you are using adminserver then we can stop the any Managed server.
The option is if you are using the nodemanager without admin server we can stop the any Managed server.
The last final solution to kill the particular Managed server pid.
Regards,
S.vinoth babu

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?

Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

How can I re-play the same selection over and over again without having to stop and go back to the beginning every time manually?

I just want to find out how to choose a single song and play it repeatedly without having to stop and restart manually each time.

that link seems to be broken right now:
403 Error - Forbidden - No cred, dude.

CcBPM - process stopped and SXMB_MONI_BPE without entries

Similar Messages

Maybe you are looking for