CcBPM - what does meant "Create New Transaction" properties ?

Hi XI expert,
could you enligtheen me on what is the meaning of "Create new transaction" properties in step Send, Transformation in the ccBPM. When i need to tick this properties. ?
Cheers
Fernand

Specify whether the system is to create a separate transaction for the send step.
You can improve system performance if you define that the system is not to create a separate transaction for the send step. Note, however, that all messages to be sent are collected and not sent until the end of the relevant transaction. This is of particular importance for transactions that take a long time to execute.
An asynchronous sender step that waits for an acknowledgment must always be executed in a separate transaction.

Similar Messages

What does "file create new version" do

What does the menu selection File --> Create new Version do?
How are the selections activated (not greyed out)?
Create iPod or iPhone Version
Create iPad or Apple TV Version
Create AAC Version
Any ideas? There no mention in the tutorial.

The first two options are for converting video into resolutions compatible with the device.
The third one is to create new versions of audio files, The type of conversion is controlled in Preferences.
Click on the import settings and choose the encoder and quality. the create version then may change to create mp3 version etc
The encoders are
AAC Encoder
AIFF Encoder
MP3 Encoder
WAV Encoder

Mediator creating new transaction for Query Database Operation

Hi,
I'm developing a project that uses a mediator and a bpel database adapter for database queries. The mediator is always creating new transactions, generating an additional overhead for the project. How to make a setting so that the mediator does not create new transactions ? There is some property ?

are you opening new session every time in toad to execute your query?if so it may be the reason, its marked in the trigger.
please mark answered post as helpful / correct

** Create New Transaction Check Box in BPM

Hi Friends,
I have ticked the check box 'Create New Transaction' for every step in BPM. In Block I have mentioned 'Block Start' & 'Block End' property as 'New Transaction'.
I have gone through SAP Help Transactional Behaviour of BPM. Somewhere it is mentioned by check this to increase system performance, database hit time will be reduced. Somewhere 'No New Transaction' is recommened.
I am confusing on this.
Could you kindly help me to understand this clearly ? (Like, what is the advantage of 'Create new Transaction'?, If untick what will happen ? ...)
Kind regards,
Jegathees P.

it depends on how you decide to use the property.
in help it mentions;
Transactional Behavior for Specific Step Types
At runtime, the system normally creates a separate transaction for each step. The transaction then covers this step only. However, you can influence the transactional behavior of particular step types. In the step properties, you can define that the system is not to start a new transaction when the step is executed. The system then executes the step in the transaction that was started at the time of execution. Consequently, no background work item is created for the step and the database does not need to be accessed. In this way you can improve system performance.
by defining to not use a new transaction at the right place you can improve performance.
It also depends on step types. For example in case of a sync send this is what help says;
No New Transaction: You can expect better system performance if the system does not create a new transaction for the send step. However, only select this setting if by repeating the send step the result is not changed (idempotency). This is the case, for example, with lookup operations.
Note
If you have selected this setting and an error occurs, synchronous sending can also cause problems in the pipeline and the receiver system following the rollback. Messages with an error status can also remain in the pipeline.
New Transaction: If the result is changed when the step is repeated, choose Create New Transaction. Otherwise the following error situation can occur: The system successfully executes a synchronous send step but an error occurs in the subsequent step. The system rolls back processing and executes all steps in the transaction - including the send step - again. If the send step results in a write-to operation in the receiver system, for example, creating a purchase order, this is also repeated. This can result in semantic errors.
Mainly transaction processing helps to have a roll back implemented.

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

MOPZ issue :Unable to create new transaction

Hello All,
We have recently installed ECC6 EHP5 ready, and now want to apply the latest patches for it.
when I try to create new transaction from DSWP-->change Management -->Maintenance Optimizer -->Crete new trasaction it is throwing an error .
I have sufficient authorizations from both ends (solmon system and to my s-user)
Solmon roles -->YY(SOLMAN_BASIS_MAINTAIN)
                            YY(SOLMAN_DSWP_ADMIN)
                            YY(SOLMAN_ISSUE_MGMT_MAIN)
                            YY(SOLMAN_LANDSCAPE_MAIN)
S-User Roles --> Maintain System Data Authorizations
System Details:
EHP1 SOLMON 7.0
AIX5.3/ORACLE 10g
Can any one guide me what is the exact problem and how to avoid the same.
ERROR Log from the dump raised
A RAISE statement in the program "CL_SM_DATA_SENDER_RFC=========CP" raised the
exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
url level error log which showed on the browser
Error when processing your request
What has happened?
The URL http://ussappsm00.corpnet2.com:8055/sap/bc/webdynpro/sap/wda_mopz_plan was not called due to an error.
Note
The following error text was processed in the system PSM : Exception condition "NOT_FOUND" raised.
The error occurred on the application server ussappsm00_PSM_55 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_DESTINATION of program CL_SM_DATA_SENDER_RFC=========CP
Method: GET_ASSIGNED_SUSERS of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_SHORT_TEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: HANDLEDEFAULT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system PSM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ussappsm00_PSM_55 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ussappsm00_PSM_55 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: RRD42469 -l: E -s: PSM -i: ussappsm00_PSM_55 -w: 0 -d: 20110715 -t: 041437 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Awaiting your response.
Best Regards
Rakesh

Hi,
You will need the standard SAP Change Management work center role assigned to you. If custom role it should be derived from this role SAP_SMWORK_CHANGE_MAN
Regards,
Srikishan

Create new transaction (Business Activity) and assigned to user Problem

Dear sir,
We already have the business activity with in T-code : CIC0, The transaction is ZACT1 and assigned to user group1 . It's working fine. However when I copy something from transaction ZACT1 and create to be T-code : ZACT2 . and assigned user group2. There is the problem that when log on to CIC0 . It is the authorization from for transaction ZACT1. WHen I go to su53
it need to have the authoriazaiton on Business transaction type: ZACT1
Please kindly advise.
Thank you and best regards,
Vimol

When you create new transaction variant, original transaction remains as it is. During creation of transaction variant, when you go to one by one screen, screen variants are created. It uses variant name and can be see on each screen on the top.
Once you complete trasnaction, you start using this transaction variant instead of original transaction. In SHD0, there is button on the top 'assign screen variants' which allows you to assign all screen variants created above. You can refer help file which i think has procedure to do this.

Menu path to create new transaction event key

Dear Experts,
Please give me the menu path and Transaction code to create New transaction event key for
Materials Management postings.
Thanks in Advance

Hi,
SPRO - Materials Management - Purchasing - Conditions - Define Price determination process - Define transaction/Event Keys.
For MM transaction key T Code OMGH
and for FI tarnsaction key T Code is OBCN
GO to SM30 enter the table T030A and then click on display
Please note the group as well as transaction code
May Help U !
Regards,
Pardeep Malik

Creating new transaction calling TC- GR55?

Hi Abap-Experts,
1]I want to create new transaction.
2]The name of the new transaction should be ZMGRO.
3] It should call transaction GR55 and choose report group MGRO.
4] The first screen for the user should be the selection screen to run the report group.
I think i can create transaction in se93...but don't know how to perform 3rd and 4th task listed above.
Thanks in Advance,

Dear Nitin,
just create an transaction via transaction SE93 in the following way:
1.) Call transaction SE93
2.) Enter the name of your new transaction "ZMGRO" and press the button Create
3.) Enter an short description of your new transaction and choose transaction with parameters
4.) Enter
          - transaction "START_REPORT"
          - scrip 1st screen
5.) Enter following fields in the table-control bellow:
    D_SREPOVARI-REPORTTYPE   RW
    D_SREPOVARI-REPORT            MGRO
    D_SREPOVARI-EXTDREPORT
    D_SREPOVARI-VARIANT
    D_SREPOVARI-NOSELSCRN
Via the field D_SREPOVARI-VARIANT you can also enter an selection-screen variant, wich you want to be set als default variant.

Creating new transaction

i have two methods in a stateless Session Bean which has methods methodA ( Required New ) and methodB( required New ). methodA internally calls methodB. If i remotely invoke methodA, does methodB will create a New Transaction other than the transaction of methodA.
Do i need to create a new instance of the sessionBean within methodA and then call method B to achieve this so that it is a remote invocation ?
thx
Gus

Hi,
The difference amounts to calling the same session vs creating a new session for each method call.
If you use stateless sessions then the transaction outcome would result to the same, but conceptually the first approach sounds better to me.
Guy
http://www.atomikos-support.com -- JTA/J2EE Java Transaction Forum

HOW to create new transaction code in SAP

Dear All
Thanking you for your cooperation
Pls help,
how to create a new transaction code and link with the process??????????
Thanking you

Hi
you can crete Transaction code in Transaction SE93.
To create a transaction code:
Enter a transaction code (up to 20 characters).
Choose Create.
A dialog box appears. Enter a short text and choose the transaction type.
The transaction type can be as follows:
Dialog Transactions
Report Transactions
Object-Oriented Transactions
Variant Transactions
Parameter Transactions
In a report transaction, you use a transaction code to start an executable program (type 1). An executable program usually has three steps - data entry (selection screen), data processing (often using a logical database ), and data output (list).
To create a report transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and selection screen (report transaction).
When you define a report transaction, you can specify the selection screen and variant with which you want it to start.
You can also protect the report transaction against unauthorized use. To do this, enter the name of an authorization object in the corresponding field.
Dialog Transactions
In a dialog transaction, the flow of the program is determined by a sequence of screens. The screens that are called within a transaction should belong to a single ABAP program, usually a module pool (type M program).
To create a dialog transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and screen (dialog transaction).
You can create transaction codes for Custom query;s created using SQVI also
Thanks & Regards
Kishore

CcBPM - Block Start and End (New Transaction or No New Transaction) ?

Hi,
Could you help to explain what is the purpose of this properties in Block Step
- Block Start and Block End.
Thank you and Best Regards
Fernand

Hi,
The option of defining the start or end of a block as the boundary of a transaction. For more details read this.
http://help.sap.com/saphelp_nw04/helpdata/en/45/058023846b2460e10000000a1553f7/content.htm
Regards,
Sarvesh

ARD 3.3.2 does not create new reports

Hi all!
I am running ARD 3.3.2 on my MacBook Pro with Mac OS X 10.6.2
All my clients are on ARD client 3.3.2 as well but run Mac OS X 10.4.11 or 10.5.8.
Since I've updated to 10.6 and ARD 3.3.2 i am not able to create new reports (with rebuild with new data check box activated) on any client system. ARD starts the task and stays in the status "waiting for report data" (which is translated from its German version and might be called a little different in English).
And there it stays--- for a very long time until I get an task failed message.
All clients are in the same network segment as I am. I am able to observe and control all machines as well as copy and install software onto them. Clients have no firewall activated.
All clients have one Admin User installed , which is allowed to make full use of ARD functions. When adding the clients to my ARD Computer list I used this Admin User credentials.
Does the new ARD doesn't support older OSses any more??
Any ideas , how am I able to solve this and get reports going again???
Thanx
Holger
Message was edited by: Holger Bartsch (added some more detail to client setup)

I manage 400+ computers at a University using ARD 3.3.2 with Client 3.3.2. I can not generate reports and haven't been able ever since Snow Leopard came out. We also have a developer account and there is no upgrade or version 4 in the works. Perhaps Apple's focus on giving iChat remote access has made them forget about Apple Remote Desktop, which is a shame because it's such a wonderful product.
We've been looking at Net School Support [http://www.netsupportschool.com/audio.asp] It's not as robust, but I can't continue spending money on a product/company that doesn't care about it's customer's problems. In general Apple's enterprise software efforts seem to be losing functionality instead of improving. OS 9 ARD had audio chat features, non-freezing screen lock and of course, working report generation.

Error when creating new transaction

Hi,
When im trying to create a new transaction in CIC0 the following error appears "VMC is not active" its happening for any kind of transaction and when I press OK it closes the window
can anyone help???

Hi Sri,
          The product version is maintianed correctly under SCM 7.0 EHP1.
          We are getting EWA reports regularly for the system SCM 7.0 EHP1 which we have installed.
          The only problem we are facing is in automatic selection of files in the maintenance transaction.
Regards,
Kunal Gahlot

What does Update do in $w.Properties["portalsuperuseraccount"] Powershell script?

Hi,
For instance I have to check for the super user/reader in User Policy in web app:
Get-SPWebApplication "http://reg.eg.com/"
$w = Get-SPWebApplication -Identities ["http://reg.eg.com/"]
$w.properties["portalsuperuseraccount"]
$w.properties["portalsuperreaderaccount"]
$w.update()
What does update do? does it add users in user policy setting?
Thanks!

Hello,
It should update the user account to properties. Just remove it and see the value of "$w.properties["portalsuperuseraccount"]" and "$w.properties["portalsuperreaderaccount"]". If they are null it means they are not set.
http://technet.microsoft.com/en-us/library/ff758656.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

CcBPM - what does meant "Create New Transaction" properties ?

Similar Messages

Maybe you are looking for