CCD/SAF learned DNs are not able to call

Hi,
I have configured SAF in CUCMEs and configured a SAF Forwarder for CUCM. All CUCMEs are learning and advertising DNs and able to call each other. SAF Forwarder registered CUCM as client and in CUCM I can see learned DNs too. CUCMEs are learning CUCM DNs too SAF. I have created partition for learned DNs and CSS include that partition. But I am unable to call to these numbers. while digit analysis these learned DNs are not matched with any partitions and shows blocked due to unallocated number. Can someone help me to figure out what I missed in this configuration?
Thanks.

I tried , but no luck.
In DNA, I cannot see the specific DNs are matching to any partition. But i have partition already for CCD learned DNs and I put that in Calling Search Space. In DNA it is unallocated Number. As you said I made feature configuration but still it is same.

Similar Messages

My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

My tel Goes after 10 minutes offline, apears à enige Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert

My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

My tel Goes after 10 minutes offline, apears à white Apple, and i have to unlock again. People are not able to call me while THE Apple apears. Question what can be THE solution ?? It is à 3GS tel iOS 4.2.1

Hi Richard,
You mentioned that 'Apple put the AirPrint spec out there for all printer makers'. I've been looking around but I haven't found any spec. Where did you find it?
Do printer makers have to buy a license in order to be able to advertise that they've implemented the AirPrint protocol? Is there maybe an Apple review process in place?
TIA
Geert

Not able to call action method from the javascript

I am using weblogic 10.3.2 portal.
My requirement is to call a action in controller throuhg java script when user selects a different option in a dropdown.
When try it we are not able to call it is returning null as a elementId. Below is the snippet of my code.
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
<netui:html generateIdScope="true">
<head>
<netui:base/>
</head>
<script language="JavaScript" type="text/JavaScript">
function SelectBANSubmit(id)
     var scope = document.getElementById("scopeOneSpan");
     alert("value====arv" + scope);
     //var form = document.getElementById(lookupIdByTagId(form,scope));
     //alert("value====arv" + form);
     var knoVal = document.getElementById(lookupIdByTagId(id,scope));
alert("in method" + knoVal);
     </script>
<netui:body>
<span id="scopeOneSpan">
     <netui:form action="getBillDetails" >
     <netui:select dataSource="actionForm.selection" tagId="arvind" optionsDataSource="${actionForm.resDTO.kno}" onChange="SelectBANSubmit('arvind')"/>
          </netui:form>
     </span>
     </netui:body>
</netui:html>
Any help would be appreciated.

Below is my code
JS Code
function fundemo(id)
alert("so currently we are in fundemo function ");
     var scope = document.getElementById("scopeOneSpan");
alert(scope);
     var check = document.getElementById(lookupIdByTagId('textbox1',scope));
alert("check id is " + check.id + " and its value is "+ check.value);
JSP Code
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@taglib uri="http://beehive.apache.org/netui/tags-html-1.0" prefix="netui"%>
<%@taglib uri="http://beehive.apache.org/netui/tags-databinding-1.0" prefix="netui-data"%>
<%@taglib uri="http://beehive.apache.org/netui/tags-template-1.0" prefix="netui-template"%>
<netui:html generateIdScope="true">
<head>
<netui:base/>
</head>
<script type="text/JavaScript" src="D:/testWS/testWebProject/WebContent/WEB-INF/js/test.js"> </script>
<script language="JavaScript" type="text/JavaScript">
function SelectBANSubmit(id)
alert("In JS Method of the JSP File ");
fundemo(id);
</script>
<netui:body>
<span id="scopeOneSpan">
<netui:form action="getBillDetails">
<td >
<netui:textBox dataSource="actionForm.selection" tagId="textbox1" />
</td>
<td>
<netui:button type="button" onClick="javascript:fundemo('textbox1')" value="Test click"/>
</td>
</netui:form>
</span>
</netui:body>
</netui:html>

Users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply

Hi All,
Please help me.
I have an issue where users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply. But they are can set Out Of Office automatic reply from OWA. My exchange server is Ms Exchange 2010.
The test E-mail AutoConfiguration failed with this error:
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12175; httpStatus=0.
Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
GetLastError=12007; httpStatus=0.
Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
Local autodiscover for mydomain.com starting
Local autodiscover for mydomain.com Failed (0x8004010F)
Redirect check to http://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
Srv Record lookup for http://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x80072EE7)
Srv Record lookup for mydomain.com starting
Srv Record lookup for mydomain.com Failed (0x8004010F)
Any idea?
Thanks,
Pieter

OK.
Please follow this step.
1. As you said you are in coexistence step , so for now all endpoint already point to Exchange 2010 right?
2. Check legacy owa redirect that you already configure
3. In Exchange 2010 , Make sure that you already configure "Autodiscoverinternaluri" by this command set-clientaccessserver -identity "servername" -autodiscoverinternaluri
https://autodiscover.domain.com/autodiscover/autodiscover.xml. and don't forget to create autodiscover record in DNS
4. in Exchange 2010 , Make sure that you already configure "EWS" path by this command set-webservicesvertualdirectory -identity "XXX\Default web site name" -internalurl
https://yourinternalurl/EWS/Exchange.asmx -externalurl https://yourexternalurl/EWS/Exchange.asmx
5. don't forget to replicate freebusy from Exchange 2003 to Excahnge 2010 via public folder.
You error look like client cannot get autodiscover process please check it again.

Why users are not able to see certain printers even though they are in the Airgroup server table

Q: Why users are not able to see only certain printers even though they are in the Airgroup server table ?
A: In certain scenarios we may notice printers come up under the server /cache entries on the controller.
However when an airgroup user does search for printer, they may not see all the printers, certain printers may be not visible .
This is because the service IDs sent by the user in the MDNS query are not broadcast by these printers
In the below capture the Ipad sends query for service id "_universal_sub_ipp_tcplocal" and "_universal_sub_ipps_tcplocal" and hence the controller will
respond with the printers that broadcasts these service ids.
Non–Visible printer :
_printer._tcp.local PTR IN 7200 10.125.30.223 5820.05 Wed Mar 18 13:24:26 2015
_pdl-datastream._tcp.local PTR IN 7200 10.125.30.223 6112.25 Wed Mar 18 13:24:26 2015
_ipp._tcp.local PTR IN 7200 10.125.30.223 5888.15 Wed Mar 18 13:24:26 2015
_http._tcp.local PTR IN 7200 10.125.30.223 6293.88 Wed Mar 18 13:24:26 2015
NPIED487E.local A IN 240 10.125.30.223 194.43 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.87 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 205.14 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 197.18 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 196.42 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 208.15 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local SRV/NBSTAT IN 240 10.125.30.223 207.35 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local TXT IN 240 10.125.30.223 200.64 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._ipp._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.44 Wed Mar 18 13:24:26 2015
Visible-printer :
_printer._tcp.local PTR IN 4500 10.125.26.29 3745.82 Wed Mar 18 13:24:51 2015
_universal._sub._ipp._tcp.local PTR IN 4500 10.125.26.29 3694.14 Wed Mar 18 13:24:51 2015
_ipp._tcp.local PTR IN 4500 10.125.26.29 3628.81 Wed Mar 18 13:24:51 2015
_pdl-datastream._tcp.local PTR IN 4500 10.125.26.29 3616.14 Wed Mar 18 13:24:51 2015
_http._tcp.local PTR IN 4500 10.125.26.29 3793.56 Wed Mar 18 13:24:51 2015
XRX9C934E25C52D.local A IN 120 10.125.26.29 355.03 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local SRV/NBSTAT IN 120 10.125.26.29 130.45 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local TXT IN 4500 10.125.26.29 3670.33 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local SRV/NBSTAT IN 120 10.125.26.29 389.55 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local TXT IN 4500 10.125.26.29 3640.60 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._pdl-datastream._tcp.local SRV/NBSTAT IN 120 10.125.26.29 210.97 Wed Mar 18 13:24:51 2015
In order to learn other printers we may need to use specific app provided by printer vendor on the client or configure the printers to send these service IDs.

The net 451 issues made it not work after a while but it affected the entire RWW site not just remote access:
http://blogs.technet.com/b/sbs/archive/2014/01/13/troubleshooting-an-unexpected-error-occurred-message-when-using-remote-web-access-to-connect-to-computers.aspx
Careful if you try and uninstall it, you'll need to put back net 4.0 and reconfigure some stuff.
Did it ever work?
Make sure the users have installed the certificate they need and turn on compatibility mode in IE (also make sure IE isn't locked down and disabling activeX).:
https://technet.microsoft.com/en-us/library/dd701173%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-- Al

ADRMS::- Clients are not able to open document which permission were restricted by using ADRMS!

Infrastructure:- (i) One Sql Server 2005 running on Windows server 2003 SP2 for RMS Database Storage.
                         (ii) ADDC & ADCS (no web enrollment) running on Windows server 2003 SP2. (FFL & DFL set to 2003)
                         (iii) ADRMS Running on Windows Server 2008.
                         (iv) Clients are using either Windows 7 with Office2010 pro or Windows 8 with Office 2013.
Question: Users are able to connect ADRMS Server and restrict permission to their documents without any issue. BUT CANNOT open the restricted document even by the owner/administrator. Whenever they try to open restricted docs a message appears " Cannot
configure your computer for Information Right Management at this time. Contact your administrator if this problem continues. "
I checked > 'rms.company.com' is added to local intranet site using IE.
So far I think clients computers are not able to retrieve the rms url.
Kindly, suggest how should I approach to the solution.
NB:- I am new to ADRMS.

Hi Ashim Kumar Nath,
Have you registered SCP when installing ADRMS? If you can't remember, you can check this running ADSI Edit, connect to the configuration container in verify if those nodes exist CN=Configuration [server name], CN=Services, CN=RightsManagementServices,
CN=SCP. Right click on SCP and verify that serviceBindingInformation contains your https://rms.company.com/_wmcs/certification server name.
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.

go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once

I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore. It is sad that companies like apple are not able to support thier sofware and business. I went to a apple store at Sout

I have a problem with my Iphone 4s since I did my first update at your Itunes, the bluetooth and the WiFi it is not workinhg anymore.
It is sad that companies like apple are not able to support thier sofware and business.
I went to a apple store at South Park, Charlotte NC,
and found out the worst customer service (in my case)
They don't have answers and don't understand about "dont let any customer go away sad or mad"
I explain to them that I did everything they said to fix the problem, even to dounload the iOS 6.1.3
that was supposed to fix the problem.
they said fix the problem in other phones but not in mine.
So here I am with no wifi and bluetooth, with apple technicians and experts that don't know what to do with the problem that the sofware they developed cause in my iphone 4s.
and the solution is for me to pay $199.00 US dollars for a problem that I did not cause.
wich means to buy something else from apple to fix a problem that it is not my fault.
Great! what a convenient solution.
I would like to have an answer from you guys and see if someone there have a better answer for me that shows support, values and integrity as a grest company with solutions for your customers.
Dont think that I want a new phone, I want mine fixed if is possible.
Thank you very much and God Bless you!

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on

I have added an iPhone 4 to my household and the wifi in our home no longer works for my iPhone 4S or the new iPhone 4. Both will connect to the wifi, but we are not able to view anything i.e. google just runs circles, app store just runs loading, gps on maps not found just runs? I have check all wifi issues with ATT&T, Verizon network all believe that it is the phones? I am confused as my 4S worked fine before adding the 4 to the mix....any thoughts are hits to what to do

Have you rebooted your home router?

In SharePoint 2013, some of the userswith contribute or full control rights are not able to edit and save office doucuments to SharePoint library.

In SharePoint 2013, Office 2010 and IE 8. Office web apps is not configured.
Some users with Contribute or full control are not able to edit and save documents back to SharePoint library.
When they try to save they are getting following error:
1. https://.....pptx is read-only. Do you want to save changes to a different file name?
2. Project canot access "https://...."
Try one of the following
The file may be temporarily open by another program. wait a momoment and try again.
A file with the same name may already exists. Save it with a different file name.
You may be trying to save to a read only folder. Save to a different folder instead.
Please help me with this issue.
will be waiting for any suggestions or solutions.
Thanks
Krish
99

Thanks again for quick response.
I have requested users who are having this issue to try check in/ check out, and share the results.
Result with CheckIn/CheckOut:
User was able to check out but no edit option.
'Edit Document' option under 'Files' tab was greyed out. I did check permissions every thing seems fine he has full control over the site and document library.
Please advise.
Thanks
Krish
99

[HP Expert Day] "You are not able to restore this system with the media"

Welcome to HP Experts day!
I've got a long-standing problem since last year. Let's see if you can solve this!
I'll get straight to the point :
I am unable to perform recovery on my system. This is the error message :
It's a USB recovery media created with the HP recovery media utility on the same laptop. Tested to work correctly before I sent it for RMA on my SSD. It initially was running on a micron SSD. When I got it back, it was a samsung SSD instead, according to some benchmark results.
Laptop : HP Envy Spectre XT 13-2018TU
P.S I've already opened another thread on this last year.
http://h30434.www3.hp.com/t5/Notebook-Recovery/Unable-to-boot-from-USB-recovery-media/m-p/2197929#M1...
But they were stumped.

I had this exact same issue on a Spectre XT Pro Ultrabook.
The original SSD failed and I was sent a replacement, was fortunate enough to be able to create a Recovery USB stick using the wizard in Windows. When booting from USB I received the message "You are not able to restore this system with the media".
SOLUTION: You must NOT use the Recovery USB stick in any USB3.0 port (labelled SS). Using another USB port prevented this exact error message from appearing and I was able to complete the system restore process.
I hope this helps someone, I signed up and posted here especially for this reason!

We are not able to execute below procedure, plz help me ASAP.

Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
CREATE OR REPLACE PROCEDURE GETCHART(RPT_CURSOR OUT RPT_PACKAGE.RPT_RESULTS,
V_VITALCHARTING VARCHAR2,
V_DOCIDPATIENTS VARCHAR2,
v_fromdate varchar2,
v_todate varchar2) AS
D1 VARCHAR2(500);
D2 VARCHAR2(500);
G1 VARCHAR2(500);
R1 VARCHAR2(500);
R2 VARCHAR2(500);
R3 VARCHAR2(500);
R4 VARCHAR2(500);
R5 VARCHAR2(500);
H1 VARCHAR2(500);
H2 VARCHAR2(500);
V_COUNT NUMBER;
RC VARCHAR2(100);
RMI VARCHAR2(100);
RMAX VARCHAR2(100);
R12 VARCHAR2(500);
REQ NUMBER;
V_MAX number;
v_idcount number;
RSEQ NUMBER;
RCH VARCHAR2(500);
BEGIN
INSERT INTO TEMPDATA
SELECT ROWNUM G, TIME1
FROM (SELECT distinct TO_CHAR(H.RECORDEDDNT, 'mm/dd/yy hh24:mi:ss') TIME1
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
and TO_DATE(to_char(h.recordeddnt, 'DD/MM/YYYY'),
'DD/MM/YYYY') BETWEEN
TO_DATE(v_fromdate, 'DD/MM/YYYY') AND
TO_DATE(V_TODATE, 'DD/MM/YYYY'));
SELECT MAX(ID) INTO V_MAX FROM TEMPDATA;
V_IDCOUNT := 0;
WHILE V_IDCOUNT < V_MAX loop
FOR J IN (SELECT id, ROWNUM G, vdate time1
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
D1 := D1 || 'COL' || J.G || ',';
D2 := D2 || '''' || J.TIME1 || '''' || ',';
END LOOP;
D1 := SUBSTR(D1, 1, LENGTH(D1) - 1);
D2 := SUBSTR(D2, 1, LENGTH(D2) - 1);
DBMS_OUTPUT.PUT_LINE(d1);
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
G1 := 'INSERT INTO GETDATA2 (IDSLNO,idcount,' || D1 || ') VALUES(' || RSEQ || ',' ||
V_IDCOUNT || ',' || D2 || ')';
--EXECUTE IMMEDIATE G1;
DBMS_OUTPUT.PUT_LINE(d1);
DBMS_OUTPUT.PUT_LINE(SUBSTR(D2, 1, LENGTH(D2) - 1));
DBMS_OUTPUT.PUT_LINE(G1);
EXECUTE IMMEDIATE G1;
FOR K IN (SELECT id, ROWNUM G, vdate time2
FROM (SELECT id, ROWNUM, VDATE
FROM TEMPDATA
WHERE ID BETWEEN V_IDCOUNT + 1 AND V_IDCOUNT + 8)) LOOP
FOR I IN (select s.*, rownum hslno
from (SELECT v.CHARTNAME,
v.PARAMETERNAME_CS,
' ' || v.PARAMETERNAME PARAMETERNAME,
TO_CHAR(H.recordeddnt, 'mm/dd/yy hh24:mi:ss') TIME1,
CASE
WHEN IDSLNO_GN5029 IN (1040, 1041) THEN
CASE
WHEN TO_NUMBER(d.recordedvalue) <
TO_NUMBER(D.MINVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'L')
ELSE
CASE
WHEN TO_NUMBER(d.recordedvalue) >
TO_NUMBER(D.MaxVALUE) THEN
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'H')
ELSE
decode(d.recordedvalue,
null,
d.recordedvalue,
d.recordedvalue || ' ' || 'N')
END END ELSE d.recordedvalue END IMAGECHAR,
d.minvalue,
d.maxvalue,
D.UOMCODE
FROM VIEW_PATIENTCHART V,
chartingtxheader H,
chartingtxdetails D
WHERE h.docid = d.docidchartingtxheader
and v.VITALCHARTING_PK = h.docidvitalcharting
and v.VITALPARAMETER_PK = d.docidvitalparameter
and v.VITALCHARTING_PK = V_VITALCHARTING --General Vital Signs
and H.DOCIDPATIENTS = V_DOCIDPATIENTS
ORDER BY V.DISPLAYORDER_CS, V.DISPLAYORDER
-- v.PARAMETERNAME_CS,v.PARAMETERNAME
) s
where s.time1 = k.time2) LOOP
select count(1)
into v_count
from GETDATA2 d
where d.PARAMETERNAME_CS = i.PARAMETERNAME_CS
and PARAMETERNAME = i.PARAMETERNAME
and idcount = v_idcount;
IF V_COUNT = 0 THEN
RCH := I.CHARTNAME;
R1 := 'COL' || K.G;
R2 := '''' || I.PARAMETERNAME_CS || '''' || ',';
R3 := '''' || I.PARAMETERNAME || '''' || ',';
R4 := '''' || I.IMAGECHAR || '''';
RC := '''' || I.CHARTNAME || '''' || ',';
RMI := '''' || I.minvalue || '''' || ',';
RMAX := '''' || I.maxvalue || '''' || ',';
R12 := '''' || I.UOMCODE || '''' || ',';
SELECT SEQ_GETCHART.NEXTVAL INTO RSEQ FROM DUAL;
H1 := 'INSERT INTO GETDATA2 (IDSLNO,UMCODE,idcount,CHARTNAME,minvalue,maxvalue,PARAMETERNAME_CS,PARAMETERNAME,' || R1 || ')' ||
' values(' || RSEQ || ',' || R12 || v_idcount || ',' || RC || RMI || RMAX || R2 || R3 || R4 || ')';
EXECUTE IMMEDIATE H1;
ELSE
R5 := 'COL' || K.G;
R4 := '''' || I.IMAGECHAR || '''';
H2 := 'UPDATE GETDATA2 SET ' || R5 || '=' || R4 ||
'WHERE PARAMETERNAME_CS=' || '''' || I.PARAMETERNAME_CS || '''' ||
' AND ' || 'PARAMETERNAME=' || '''' || I.PARAMETERNAME || '''';
EXECUTE IMMEDIATE H2;
END IF;
END LOOP;
end loop;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || ' (' || minvalue ||
' -- ' || maxvalue || ') ' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue != 0
and maxvalue != 0;
UPDATE getdata2 s
set s.parametername = s.parametername || ' -' || UMCODE
where s.parametername is not null
and idcount = v_idcount
and minvalue = 0
and maxvalue = 0;
UPDATE GETDATA2 S
SET S.PARAMETERNAME_CS = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY PARAMETERNAME_CS)
and idcount = v_idcount;
UPDATE GETDATA2 S
SET CHARTNAME = NULL
WHERE ROWID NOT IN (SELECT MIN(ROWID)
FROM GETDATA2
WHERE idcount = v_idcount
GROUP BY CHARTNAME)
and idcount = v_idcount;
UPDATE getdata2 s
set s.parametername = ' PARAMETER'
where s.parametername is null
AND S.PARAMETERNAME_CS IS NULL;
v_idcount := v_idcount + 8;
D1 := null;
d2 := null;
end loop;
for i in (SELECT G.PARAMETERNAME_CS, G.IDSLNO
FROM GETDATA2 G
WHERE G.PARAMETERNAME_CS IS NOT NULL) LOOP
INSERT INTO GETDATA2
(IDSLNO, PARAMETERNAME)
VALUES
(I.IDSLNO - 1 + 0.5, I.PARAMETERNAME_CS);
END LOOP;
update GETDATA2 h set h.PARAMETERNAME_CS = null;
update GETDATA2 h set h.chartname = rcH;
INSERT INTO GETDATA1
SELECT CHARTNAME,
PARAMETERNAME_CS,
PARAMETERNAME,
COL1,
COL2,
COL3,
COL4,
COL5,
COL6,
COL7,
COL8,
COL9,
COL10,
MINVALUE,
MAXVALUE,
UMCODE
FROM GETDATA2
ORDER BY IDSLNO;
OPEN RPT_CURSOR FOR
SELECT * FROM GETDATA1;
END;
CREATE OR REPLACE PACKAGE "RPT_PACKAGE"
as
type RPT_RESULTS is REF CURSOR;
type RPT_VARRAY is VARRAY(2000) of VARCHAR2(2000);
END RPT_PACKAGE;
Execute
declare
type my_newcursor IS REF CURSOR;
begin
GETCHART(my_newcursor,'General Vital Sign','1145561',sysdate-1,sysdate);
end;

Parwez wrote:
Dear All
I am created one procedure with 4 parameter 1 is Ref Cusrsor rest of 3 are Varchar,But we are not able to execute below procedure, plz help me ASAP.
see a picture of my car.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

I can not connect my I Pad to a Samsung TV. Does the following make any sense? Dear Phillip Baker, Thank you for contacting Samsung Electronics. We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can

Will the I Pad 2 connectr to a Samsung TV to play a movie from I Tunes. Samsung sent the following.
Dear Phillip,
Thank you for contacting Samsung Electronics.
We understand that you are not able to movies on the iPad on the TV. We are sorry to say that you can connect devices which are DLNA compatible and PC or laptops which are
installed with PC Share manager. If the iPad supports DLNA, you can connec it to the TV and play the files
supported by the TV. The TV supports following file video types : MKV, AVI, MP4, WMV, MPEG, MPG, ASF, 3GP, TS, TP, TRP. If you have any other questions, please feel free to contact us.
Thank you.
Samsung Online Support.
Any help?

What method of connection are you trying to use? DLNA looks like a standard for sharing media between devices over your home network, but I'm fairly certain the iPad doesn't support this protocol. Apple sell adaptors to connect your iPad directly to TV using composite or HDMI connectors. I'd be surpsied if your TV won't support either of those.
tt2

We are not able to track how PO net price got updated for 1 purticular mat.

Hi SAP Gurus,
We are not able to track how how price got updated, because there is no PIR for this material, standard price maintained
in the material master diffrent than PO price, and last/earlier to this PO price is also diffrent. And not able to see any price changes for this line item.
Other than this can we track or check regarding PO net price for the material.
Thanks and Regards,
SHARAN.

Hi,
Check the item detail->conditions->analysis.
You can know from where the price got picked.
Also check whether the material has any manual conditions (MEK*)
Mayil

CCD/SAF learned DNs are not able to call

Similar Messages

Maybe you are looking for