CCD via SAF with Third-Party PBXs

Hey Guys,
Im looking into CCD via SAF for a IP Tel Deployment, multiple sites and distributed etc. However they have a couple of sites that recently migrate to the Avaya System. They would like to keep this system for the time being and integrate the extensions into the new Cisco deployment.
I read in the SRND that CCD via SAF can potentially act as a gateway of sort and advertise third-party phone system DNs. Is this true. If this is the case I can install a Cisco ISR at the Avaya Sites and advertise the DNs.
Any info is appreciated.
Ben

You can use XI Proxy.
If you are famaliar with solution manager service desk or related issue, you can use other technicals like JCO to call function module directly.
Best regards,
Gates

Similar Messages

Lync intergration with third party PBX

I want to implement the scenario below, I dont have clear picture whether it is techinicall possible in the state of the art solution or not.
First I have one third party PBX, which is interconnected with Lync server. I configure the binding relationship between one IP Phone registerred in the third party PBX and one Lync clinet under Lync server. Eg, number 1000 is registered in third party PBX
and number 2000 is registered in Lync server. When someboday call 1000, both 1000 and 2000 can ring simutanesouly since this can be configured on the third party PBX, similary whenever 2000 is called, both 1000 and 2000 can also ring at the same time since
this cabapility is provided also by Lync server.
But I want to implement that after the call is initiated from Lync client after some inquery into the contact list and a specific contact number is selected, the IP Phone binded to this Lync number also will ring and act as the caller to call the other
side. Eg, when 3000 is selected on Lync (number 2000), 1000, which is the IP Phone under the third party PBX will call 3000.
Please kindly suggest the techinical solution or any techinial analysis is welcome. Thanks!

So, when you set up RCC, Lync sends the command to the IP PBX, the IP Phone knows which number to call because it understands that language from Lync Typically the PBX supplier has this feature that is known to work with Lync. If the PBX
supplier doesn't have this, but they do have TAPI support, I've seen some third party products that can convert the Lync RCC language into TAPI and send it to the unsupported PBX. Estos used to have a good one, but I haven't played with it in a while:
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html
So for Legacy PBXs, usually they don't supply anything that will connect with Lync, so that's where you'll need the RCC->TAPI gateway if TAPI is available from your PBX. If it's not, then you're stuck with the calling between them (1000, 2000),
but you couldn't control the PBX IP Phone with your Lync client.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How to integrate DRM with third party tool for loading metadata in SQL table

Experts,
I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
Is there anyway we can customize DRM to execute queries or run batch
Can I have a basic example please.
Thanks in advance,
Regards,

1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
let me know if you have any issues.

SAP IDM 7.0 integration with third party system

Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?

Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems.

Need connectivity of SAP Oracle with Third Party tool with dsn

Hi Friends,
We need to access SAP's Oracle database with third party tool with the help of dsn creation. For that we need to create 2 staging tables and need a new segment for these tables. Our data will move from SAP transactions to these 2 tables and we want to fetch this data via dsn into another third party S/W.
I am unaware of such kind of working, can you please help me how to create new segment and how to create dsn for accessing tables in this segment.
Our requirement is as follow.
The staging tables are required in the SAP database with user name and password. The user should have all access to the staging table only.
Requesting your kind help on this issue. Please suggest for further processing of activity.
Rgds, Krishan Raheja.

Hi,
Common way to integrate SAP (database) with third party Application is to use and implement SAP Connector (Java or .Net).
Using this, you can fetch the data from SAP database to use it in Third party application.
As per my understanding the method you mentioned, will void the SAP database license term.
So Please check before doing such configuraiton. Also that method is NOT recommended..
Regards.
Rajesh Narkhede

SGD with Third Party Authentication issue

Hi
I am trying to setup SGD with Third Party Authentication and have done all the requisites for this.
I input the SGD URL and get the Third Party Login page but after I input my credentials, I get redirected to the SGD default login page which should not be the case. I had already set "Tomcat Authentication" as false in server.xml and enabled the Third Party authentication scheme in Array Manger
What else am I missing ?
Kindly advise
SGD ver4.31
Thanks

Every now and then I have found the same. One thing that almost always solved the problem was recreating a new trusted user, you can follow the steps from:
[http://docs.sun.com/source/820-1088/trusted_users.html|http://docs.sun.com/source/820-1088/trusted_users.html]
Especially the step to test the trusted_user is a very good test to see if the trusted user is ok: http://server/axis/services/rpc/externalauth
When prompted, log in as the trusted user.
An other way to test it is via the api-test functionality: http://server/sgd/admin/apitest/
First setup a session: webtopsession->startSession(0)
Then authenticate via externalauth->setSessionIdentity
These steps are the minimal steps to perform 3rdParty Authentication
(There is also an example jsp for 3rd Party Authentication on the wikis.sun: [http://wikis.sun.com/display/SecureGlobalDesktop/Single+sign-on+(before+4.40)|http://wikis.sun.com/display/SecureGlobalDesktop/Single+sign-on+(before+4.40)] )
- Remold

Really Apple? OSX 10.8.5 disables built-in camera functionality with third party apps such as Skype and Gmail video chat. I do not have time machine on my 2013 MB Air. How can I get back to 10.8.4?

Really Apple?
With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
I do not have a time machine bkup as this computer is not used to store important documents.
Thank you.

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

How to integrate single sign on with third party system

we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.

We too are in the process of implementing iStore with SSO features.
And if you believe me it seems to me as nightmare.
In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
[email protected]
regards and thanks in advance
Vikas Deep

SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Integration of ChaRM with third party tools

Hi all,
We are in the process of building the solution for Change Request Management implementation integrated with third party tool.
As the normal process for ChaRM is to work with the Service Desk functionality (to raise a ticket, then support message, change request, change document etc...), but what we need is create the change request, and change document directly with ChaRM without using the Service Desk functionality.
Did anybody come across this situation?
Please share your experience.
Thanks in advance.
Balaji

Hi Balaji,
there is no problem, as I understand, you want to use ChaRM without Service Desk. OK, than you create directly a Change Request in CRMD_ORDER, the transaction type you have to select is SDCR (standard transaction type), you have to approve it and then you can create a change document, it is not necessary that you start with a Service Desk ticket like SLFN.
You need configured TMS a SolMan Project with a Maintenance Cycle, thats it (but this is enough , don't forget the customizing).
I hope I understood you correct
Udo

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

How to integrate iReceivables with third party payment system?

Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
Sunita

Hello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

Best practices for apps integration with third party systems ?

Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.

you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja

EP integration with third party BI tools

Hi,
I was looking for information and pointers on EP integration with third party BI tools like Business Objects etc. Would be grateful.
Thanks,
Madhu

Thanks. We have a full fledged Business Objects reporting environment. My question is: As a beginner in the EP space, I would like to understand how to treat the Business Objects environment as one of the content providers for the Enterprise Portal? Are there any documents or manuals that talk about the integration of EP with Business Objects? I know the question is too broad, but any pointers would be useful.

CCD via SAF with Third-Party PBXs

Similar Messages

Maybe you are looking for