CCE Monitoring and Management

Hello All,
I am looking for a software tool that will do any or all of the following
1) Generate a report on the configuration of Packaged CCE
2) Flag any issues with the configuration
Any thoughts?
All replies rated. Thanks in advance!

Er... This way: if there's a typo in the configuration or some elements are not filled in, the system would let you know. If there's a logical error, however, like an unexpected port or IP address, the system would accept it (and no, it won't double ask you whether you are absolutely sure that this is the right server you are trying to refer to). ICM is not a toy framework. I have been learning it for the last ten years and still I can find something new in it.
G.

Similar Messages

VoIP Monitoring and Management Tools

Does anyone have suggestion on VoIP monitoring and management tools for large enterprise voip infrastructure?
We are in the final phase of 8000 phone cut-over across 2 location (2clusters) and need some advice on choosing the right monitoring system.
I saw Qovia have Cisco approved monitoring tools.
Does anyone ever use this? any suggestions or advice?
Thanks in advance
Bonaldi Kresnanto

Bonaldi,
Monitoring voice quality is just one aspect of ongoing operations. It is equally (if not more) important to have the ability to remotely troubleshoot end-user problems, manage configuration changes, and perform active testing on a regular basis before users are impacted.
In addition, whenever you make changes to your IPT system (e.g. CallManager upgrades/patches, IOS upgrades, power outages) you'll definitely want the ability to verify the system is still operating as design. Using the active tests you can do this easily and in an automated fashion.
ClarusIPC Operations is the only product that addresses these needs. It is also just as valuable during the deployment as ongoing operations to help you make changes and deploy new phones with the same product you day-to-day.
I'd like to talk to you more about the product and how it can be used in your environment.
David Roberts
[email protected]

Develop application for java Monitoring and Management

hi
i would like to develop an application that enables me to monitor and manage Java applications and instead of using jconsole ormc4j
please can you tell mz how to start

The various general JMX clients such JConsole, [MC4J|http://mc4j.org/confluence/display/mc4j/Home] (the tool referenced with "or mc4j" above), VisualVM, and jManage all use the same approach for remote JMX management that you can use ([JSR 160|http://jcp.org/en/jsr/detail?id=160]).
Some useful resources include the [Java Tutorial on JMX Remote Management|http://java.sun.com/docs/books/tutorial/jmx/remote/index.html], [Remote JMX: Connectors and Adapters|http://marxsoftware.blogspot.com/2008/08/remote-jmx-connectors-and-adapters.html], and [Remote JMX: With and Without Spring and Proxies|http://marxsoftware.blogspot.com/2008/06/remote-jmx-with-and-without-spring-and.html] (focus on non-Spring clients with and without proxies).

Monitoring and Management

Is there any software available for Lenovo servers like Dell's OpenManage to monitor fans, power supplies, disks, and RAID controllers? I could find anything on the support site or Google and spent 45 minutes on the phone with a lot of clueless people that just kept transfering me between Lenovo and IBM.
Solved!
Go to Solution.

I have the same question...
I called support and I told the rep that we are jumping the Dell ship and require a monitoring soultion like Open Manage the guy had no clue on what to use to monitor the server.
I found LSI megaRAID app for the onboard RAID but it appears that I need to purchase the advance option for alerts... Really
Jeremy

Tree from XML (JMX monitoring and management application)

I am trying to create a tree structure from XML. I am setting
the below XML as the dataProvider for the tree.
Now I only want to see the "element" labels in the tree
structure. But I also see the operationList and the operations
under it too. Is there any way I can filter these out from the tree
structure ?
The reason why I have the operations is that I have to
display them on the right hand side, i.e whenever someone clicks on
an element the operations corresponding to that have to be
displayed on the right hand side.
If you see the "flex-admin" application under the livecycle
data services ... my applications is exactly similar to that.
If anyone needs more information, I would be happy to
provide.
<?xml version="1.0" encoding="UTF-8"?>
<centralmbeanserver>
<element label = "FMC-DropCopies-QA" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA" >
<element label = "Cache Manager" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Cache Manager"
>
<element label = "SACFixFilterRulesCache" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Cache Manager,DB
Cache=SACFixFilterRulesCache" >
<operationList>
<operation name = "reloadDBCache" returnType =
"java.lang.String">
</operation>
</operationList>
</element>
<element label = "SACFIXExecBrokerMapCache" canonicalName
= "CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Cache
Manager,DB Cache=SACFIXExecBrokerMapCache" >
<operationList>
<operation name = "reloadDBCache" returnType =
"java.lang.String">
</operation>
</operationList>
</element>
</element>
<element label = "Source Manager" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Source Manager"
>
<operationList>
<operation name = "enableAllMsgSources" returnType =
"void">
</operation>
<operation name = "disableAllMsgSources" returnType =
"void">
</operation>
<operation name = "listMsgSourceNames" returnType =
"java.util.List">
</operation>
<operation name = "reloadSources" returnType = "void">
</operation>
</operationList>
<element label = "CS-SACFIX6-SS" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Source
Manager,Msg Source=CS-SACFIX6-SS" >
<operationList>
<operation name = "enableMsgSource" returnType = "class
java.lang.String">
</operation>
<operation name = "disableMsgSource" returnType = "class
java.lang.String">
</operation>
</operationList>
</element>
<element label = "CS-SACFIX1-SS" canonicalName =
"CentralMBeanServer:App=FMC-DropCopies-QA,Componet=Source
Manager,Msg Source=CS-SACFIX1-SS" >
<operationList>
<operation name = "enableMsgSource" returnType = "class
java.lang.String">
</operation>
<operation name = "disableMsgSource" returnType = "class
java.lang.String">
</operation>
</operationList>
</element>
</element>
</element>
</centralmbeanserver>

How is the WebSphere node connected to the cluster? Is it using TCMP? Extend?
Local, Distributed, Replicated, Near, Overflow, External and Optimistic cache statistics appear in the Coherence JMX server. However, near and local caches created on extend nodes do not appear. Therefore the -Dtangosol.coherence.management.remote=true on an Extend client will not register the near or local caches.
Thanks,
Everett

Jconsole - J2SE Monitoring and Management Console

Where is jconsole ?
According to the documentation, the jconsole tool is come installed with J2SE 1.5
Does anyone know how to get jconsole ?

Does it slow applications down
1) when JConsole is not running/connected to the JVM but the application is still started with -Dcom.sun.management.jmxremote
2) when JConsole is connected to the JVM and traces the resources
?

Monitor and manage small broadband link

Hi all,
Recently my company setup a broadband link external to all enterprise network. This is a simple ISP connection they pay for separate. Business reason justify such installation.
Now they have expanded this link to a small lan. and got it wireless. Because these now accommodates more than 1 user they ask me to look after. But I have no clue how should I manage bandwidth and control who uses the resources...
The design is ISP modem connected to Linksys router connected to Cisco Switch Catalyst 2960 C Series which is connected to 4 cisco Wireless APs. The Cisco Switch also has a port connected to a Cisco 2500 Series Wireless controller.
I have been exploring the capabilities of this wireless controller but I get only general statistics about traffic... I can not see if what each IP is using from the bandwidth and for what is it using..
Because I have no servers or firewalls in the middle I am a bit loss on how to administer this...
Is there any tool that would help me?
Any one with similar experience?
Many thanks

If the switch supports netflow then you can obtain software from many vendors that will analyze the netflow data.
http://www.cisco.com/en/US/prod/iosswrel/ps6537/ps6555/ps6601/networking_solutions_products_genericcontent0900aecd805ff728.html
Sent from Cisco Technical Support iPad App

DB Adapter and jca transport: monitoring and management

Greetings.
We have faced with several issues with DB Adapter and JCA transport proxy. We use pooling DB adapter. As the result - the pooling stop. I would like to know:
1. Is the way to monitor pooling threads of DB Adapter in OSB? I would like to answer the question "does it work?".
2. Is the way to restart pooling in JCA Proxy service? The way we found is re-save OSB configuration in OSB Console, bu it is terrible.
I use:
                    ActivationSpec="oracle.tip.adapter.db.DBActivationSpec"
                    DescriptorName="DescriptorName"
                    QueryName="QueryName"
PollingStrategyName="LogicalDeletePollingStrategy"
                    MarkReadFieldName="IsLoad" MarkReadValue="Y"
                    MarkReservedValue="R${IP[-3]}" MarkUnreadValue="N"
                    SequencingFieldName="ID" MaxRaiseSize="5"
                    MaxTransactionSize="unlimited" PollingInterval="180"
                    NumberOfThreads="1" UseBatchDestroy="false"
                    ReturnSingleResultSet="true"
                    MappingsMetaDataURL="MappingsMetaDataURL.xml" />
Oracle Service Bus Version: [WebLogic Oracle Service Bus 10.3]
Regards,
Boris
Edited by: Boris Ilyushonak on 14-Mar-2011 05:22

1. Is the way to monitor pooling threads of DB Adapter in OSB? I would like to answer the question "does it work?". OSB provides OOB support for monitoring -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/monitoring.html#wp1008658
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/operations/index.html
2. Is the way to restart pooling in JCA Proxy service? The way we found is re-save OSB configuration in OSB Console, bu it is terrible.You may restart/redeploy DBAdapter in Weblogic Admin Console and polling should start. Ideally poller transports does not stop polling. Let us know the complete detail if you experienced such issue.
Regards,
Anuj

Monitor and manage windows firewall on multiple computers.

What im looking for is a tool that will display the off/on status of the firewall and a report that shows what rules are active and preferably a way to aggregate this data.
Does SCCM or SCOM provide anything like this or will i have to script something?

Please post here : https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenter2012configurationmanager
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Monitoring and managing time limits in parental controls

Howdy!
I've a few problems with the time limits in Parental Controls: a) I cannot tell how much time is left on an account, and b) I cannot add additional time to an account at will -- I have to wait for a warning dialog to come up when there's just a few minutes left.
Is there something built into OSX (GUI or CLI) that would allow me to view time remaining? Is there a way to add/modify the time remaining on an account?
Thanks!

I too find this annoying with parental controls. There should be a prominent countdown timer in the menu bar, in my opinion, that lets your kids know how much time is remaining on their login session. But to my knowledge there is no way to do this.
However, I have an additional problem: If my child's account logs out when all of his time is used, and then I try to add a few minutes to his time limit, I am unable to. At the login screen, there will be a red circle with a bar through it next to his account, and the phrase "can log in at 12:00 am". I click on his login icon, and at the login prompt I am asked if I want to add additional time. I choose the amount of time from the drop down menu, enter my admin user and password, and click enter. The desktop background rotates to briefly reveal my son's user account desktop, and then rotates back within a few seconds and logs him out. No amount of time can be added to the account. Rebooting does not fix the problem.
Anyone have a similar issue?

Monitoring and management screencast questions / discussion

i have just watched this screencast ....
http://developers.sun.com/docs/javacaps/tutorials/demos/management_monitoring_2/launch.html
does anyone know which "open management console" that is developed in public is meant in the screencast?
regards chris

Hi Chris,
Its probably referring to this:
http://esb-console.dev.java.net/
rgds
Jason

How to monitor and manage apps_undots1?

Hi
Our Production ERP single node instance (Apps: 12.0.6,DB: 10.2.0.3 & OS: AIX 5.3.7) is running since 4 (almost) years. The database was behaving perfectly. Since last week i am observing that 'apps_undots1' is growing rapidly. It has 2 datafiles of size 7Gb each. Day before yesterday, i have added one datafile of 7GB but today it shows as full. What causing the apps_undots1 to grow so rapidly? What precaution to be taken?
Please shed some light?
Regards
Arizuddin

Hi Ariz,
arizuddin wrote:
Hi
Our Production ERP single node instance (Apps: 12.0.6,DB: 10.2.0.3 & OS: AIX 5.3.7) is running since 4 (almost) years. The database was behaving perfectly. Since last week i am observing that 'apps_undots1' is growing rapidly. It has 2 datafiles of size 7Gb each. Day before yesterday, i have added one datafile of 7GB but today it shows as full. What causing the apps_undots1 to grow so rapidly? What precaution to be taken?AFAIK since 10gR2 onwards, undo tablespace will always be full what ever size it may be .
MOS Doc 413732.1 - Full UNDO Tablespace In 10gR2
this is normal behavior.
Correct me if Im wrong
Do you see any error in the alert log file ?
AppsmAsti
Sharing is Caring

Monitoring and Managenent in IPVPN's

Hi,
Could do with a bit of advice on monitoring and management of circuits and CPE's in L3IPVPNs
Graphing of circuits seems straight forward as I can just add PE's to Cacti and graph all customer circuits.
My thoughts when looking at Monitoring CPE is that I could use Central Services where I have a monitoring VRF with a NMS server sat on it, this monitoring vrf would import all the CPE loopbacks from all customer IPVPN's and then all customer IPVPN's would import the ip address of the NMS server, is this common?
The only issue or complexity I can see in this is the management of IP addressing as I would have to make sure all CPE's loopbacks across all IPVPN's have unique IP addresses that do not conflict with the customer IP addressing scheme and do not conflict with the monitoriong IP addressing scheme. This is because the monitoring VRF will hold the all CPE loopbacks routes and the monitoring subnet and then the customer overlap is a consideration as the CPE will be configured with that /32 and therefore it can't overlap with their IP addressing.
Any way to simplify this or work around this?
To make this easier is anyone utilising the 169.254.0.0/16 subnet for Central Services as we have a better chance of the customers not wanting to use this, can anyone see a potential issues using this?
For management I could just stick another server (maybe a terminal server or just use the NMS server) on the same monitoring subnet and again use the CPE loopbacks to ssh to them, although I worked at a previous (much larger ISP) and we had some sort of system that you could ssh to and choose what IPVPN/vrf you want to be in and then you were in that vrf - it was a long time ago that I worked there and didn't put much thought into how that worked at the time (wish I had now) but the only way I can see this working is something that could run MPBGP - all I am asking here is whether anyone has any suggestions/links/software or nice tricks of the trade etc for managemnet- I know it is a high level question and I don't expect anyone to spend a load of time walking me thorugh this.
Any input on this would help a lot, thanks in advance
BTW, my PE's are ASR 9001's

Hi,
Could do with a bit of advice on monitoring and management of circuits and CPE's in L3IPVPNs
Graphing of circuits seems straight forward as I can just add PE's to Cacti and graph all customer circuits.
My thoughts when looking at Monitoring CPE is that I could use Central Services where I have a monitoring VRF with a NMS server sat on it, this monitoring vrf would import all the CPE loopbacks from all customer IPVPN's and then all customer IPVPN's would import the ip address of the NMS server, is this common?
The only issue or complexity I can see in this is the management of IP addressing as I would have to make sure all CPE's loopbacks across all IPVPN's have unique IP addresses that do not conflict with the customer IP addressing scheme and do not conflict with the monitoriong IP addressing scheme. This is because the monitoring VRF will hold the all CPE loopbacks routes and the monitoring subnet and then the customer overlap is a consideration as the CPE will be configured with that /32 and therefore it can't overlap with their IP addressing.
Any way to simplify this or work around this?
To make this easier is anyone utilising the 169.254.0.0/16 subnet for Central Services as we have a better chance of the customers not wanting to use this, can anyone see a potential issues using this?
For management I could just stick another server (maybe a terminal server or just use the NMS server) on the same monitoring subnet and again use the CPE loopbacks to ssh to them, although I worked at a previous (much larger ISP) and we had some sort of system that you could ssh to and choose what IPVPN/vrf you want to be in and then you were in that vrf - it was a long time ago that I worked there and didn't put much thought into how that worked at the time (wish I had now) but the only way I can see this working is something that could run MPBGP - all I am asking here is whether anyone has any suggestions/links/software or nice tricks of the trade etc for managemnet- I know it is a high level question and I don't expect anyone to spend a load of time walking me thorugh this.
Any input on this would help a lot, thanks in advance
BTW, my PE's are ASR 9001's

Battery management system design for EV to monitor and to balance the Li-Ion cells' voltages using LabView, NI myRIO-1900 and LTC6804-2 IC

Hello,
I have NI myRIO-1900 and LabView 2014. I need to design a Bettary management system to monitor and balance the rechargable Lithium-Ion battery packs' voltages and charges using LTC6804-2 IC. I am facing some problems to program the IC for monitoring and balancing the cells' voltages and charges using LabView via NI myRIO. Can anyone help me to design this by giving some references and technques.
Thanks in advance.
Mohammad Hoque
[email protected]

Hi Mohammad,
I believe with EPS you can monitor the cells' voldates and charging. I'm not sure what you mean by balancing, though. Can you elaborate a bit more?
Thanks.

Color Management - How get monitor and printer to match?

We have not been able to get what we see on our monitor and what we get out of our printer to reasonably match - the prints are always significantly darker than the monitor. It makes working on Photoshop Elements (both 5 and Trial 7) virtually worthless, as we can't rely on getting out what we see after making adjustments to our photos. We bought a Colormunki to calibrate the monitor and create paper profiles, but that didn't solve the problem. We have worked with the Colormunki people for weeks and haven't made any progress. We are sure that we are using the correct settings in both Elements and the Printer to have Elements control color and apply the ICC profile. We have an Epson Stylus Photo R2400 printer and a Samsung SyncMaster 2253BW monitor. We think, at this point, that the monitor maybe the problem. Apparently it is known for its excessive brightness - as even with the calibration set for very low brightness, the problem remains. Anyway, our question is whether anyone can think of a solution or, if not, can recommend a monitor more likely to give us a reliable match to the printer - what photographers/photoshop users use?? alternatively, any ideas where we can contact people who might be able to help???? Thanks in advance for your help.

I'm having the same problem with a Syncmaster 226CW Elements 7 and a Spyder3. I've cal'd the monitor to 6500 K and 90 cd/SQM but the prints are still very dark on my Canon MP520. I've also tried letting Elements manage the color and selected one of the Canon profiles -- again no luck. Several emails to Canon just gave me advice to clean nozzles and ck patterns -- no help from Canon so far. Pondering what to try next....

CCE Monitoring and Management

Similar Messages

Maybe you are looking for