CCM 2.0 Catalogs with Images

When trying to load a catalog using CCM 2.0 the system stops at the colum with the images at the first line. Each of the pictures and or URLs are valid...any suggestions on what may be causing this?? Thanks
Here is what the header in the colum for the images looks like in the data file.
Characteristic 14
Picture#/ccm/url

Hello,
What do you mean by format?
We have the same problem.
Our characteristic 14 is:
PICTURES#/CCM/URL
We also put characteristic 13:
PICTURES#/CCM/DESCRIPTION
Any idea?
Thanks a lot,
regards,
Caroline

Similar Messages

Using a network-stored catalog with Mac OSX

Greetings all.
I am using Photoshop Elements 11 on Mac OSX Mountain Lion and want to store my catalog on a local network drive (FreeNAS). I have encountered many problems while attempting to do this. Then I noticed in the Elements Organizer help, under the section "Repair a catalog", the following: "Note: (Mac OS) You cannot access catalogs present on a network drive."
Is this true. or has someone found a workaround to the problem?
Thanks!
--John

Thanks, for that ( I assume we have to carry on in English due to forum policy even though we are both of German tongue I assume)
You mean the access problems are part of the "no network drive" thing? I suspected that. Took me a whole day in front of my computer to realign the mess. So should one better not use the network drives at all? Quite a pity in times where everybody seems to use network storage.
No, I did not use organizer to use the photos. So there is no way to reconnect them? Should I delete the catalogue and start with the photos from scratch?
Regards
Andibuch
Am 02.01.2013 um 23:35 schrieb Barbara B.:
Re: Using a network-stored catalog with Mac OSX
created by Barbara B. in Photoshop Elements - View the full discussion
Well, yes, these are part of the "no network drive" thing.
As for moving the photos, did you use organizer to move them? You will always have trouble if you move photos outside of organizer, even on the same drive--you have to let it manage your photos or it doesn't have a clue as to what happened.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4963270#4963270
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4963270#4963270
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4963270#4963270. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

As I can sometimes do, I did not read the directions before delving into LR. Now I find my self with image history in LR on 2 or 3 of my HD's. I would like to now consolidate it on one HD but fear in doing so I will lose the images I have created within

As I can sometimes do, I did not read the directions before delving into LR. Now I find my self with image history in LR on 2 or 3 of my HD's. I would like to now consolidate it on one HD but fear in doing so I will lose the images I have created within LR. Is there a tutorio or some other way to get me back on track with this application?

Your image history (if I understand you properly) is stored in your catalog file, and nowhere else, and so it is only on a single drive.
Do you mean you have edited photos on multiple drives? This isn't a problem for Lightroom at all, the software doesn't care, and you can leave things just the way they are. But if it bothers you for some reason, you can move the photos to a single drive if you want. In Lightroom select the desired photos or folders (it's easier to do this using Folders) and drag them to the desired drive.
Alternative if you will be moving lots of folders: Adobe Lightroom - Find moved or missing files and folders

How to get prices from CCM 2.0 catalog

Hi guys,
I configured y populated a Purchasing Catalog in CCM 2.0
Everything seems to work alright when I downloading a material from the catalog in to a Shopping Cart except the price of the material!
The field price: "/ccm/amount" - Importe - is populated with OCI field: NEW_ITEM-PRICE
The field: "/ccm/currency_code" is populated with OCI field:
NEW_ITEM-CURRENCY
Upon transferring the OCI values into the Shopping Cart, in the transaction SLG1 , object string "BBP_OCI", shows only trafficlight in green! It doesnt mention the OCI field NEW_ITEM-PRICE.
What Im I doing wrong? Maybe some configuration missing?
Thanks for any help,
Aart

You mention "product", is this a SAP Product master item? If so the price would come from the product master in commpr01?
If this is not the case your description of the config looks correct. You should be passing the value of the characteristic /ccm/amount to the OCI price field.
This should work easily.
Other things to check - formating of numeric price?
Are you certain "price" is maintained in this characteristic value?
b

Sharing a lightroom catalog - Does housing the catalog and images on an external hard drive work?

I will be managing a small portion of a client's overall image workflow by updating their web prescence on a regular basis with new work and retagging/uploading old work. I believe this requires the catalog and the image library to be housed on an external hard drive that can travel between the two of us. We are both working on PC's with LR 5.3.
The workflow would look something like this:
Client downloads new images onto external hard drive and imports into LR
"ClientCatalog" is created
Flags Picks and Creates a Collection from those Picks
Hard drive is handed off to me where I open "ClientCatalog"
Make suggested edits to images
add detailed tags and metadata
upload to various social media sites and websites
return hard drive to client
Is there potential problem with this workflow? My assumption is that if everything is housed on the external hard drive then there are no worries about the catalog containing all the latest updates. Can anyone fill me in on potential problems I might have overlooked? Are there any "safety protocols" you would add in to this workflow (besides mirroring everythign on another hard drive) that you would suggest?

Photwell wrote:
I ran into this problem with my own catalog a few weeks ago. I plugged my external hard drive into a different USB and everything was gone.
Not gone, just mis-addressed. It can be re-addressed as necessary. I believe it is enough on MacOs, to name the drive. On Windows, the details vary by OS version (Google for instructions) but this is for Win7:
http://pcsupport.about.com/od/windows7/ht/change-drive-letters-windows-7.htm
and it is a good idea to assign a drive letter quite a bit later in the alphabet, to restrict the chance of ever finding that letter already taken. For example, it could be X: for external drive, or P: for plug-in drive, or whatever makes sense to you...
After doing this, on re-starting Lightroom and opening the Catalog, the images will at first go offline (previously used location not found). To get them back online, it will be necessary to re-browse the parent folder for all your image folders, to reflect its new location under the new drive reference. That done, the Catalog location info for all the images and subfolders located under that parent folder, will be updated automatically. If this parent is not currently showing in the LR Folders list, you can right-click and choose "Show Parent". LR's display then reorganises to reflect this actual hierarchy.
regards, RP

Export Resized Photos as New Catalog with Keyword Hierarchy

I want a new catalog with small jpgs and the hierarchical keywords. But I seem to be able to get each part of that individually but I can't seem to get them all at the same time.
If I select images and export them with "Write Keywords as Lightroom Hierarchy" checked, then import those new jpgs into a new catalog, my keywords are a flat list without the hierarchy. I tried exporting my keyword hierarchy as *.txt then importing it into an empty catalog so the hierarchy already existed. When I imported the new jpgs into that catalog, the keywords still came in as a flat list appended to the hierarchical keyword list.
I tried selecting the images and importing as a new catalog, which gives me a new catalog, but the new catalog has the original raw images.
Any suggestions?
Thanks for any help with this.

Thanks, I thought I might be missing something. I had thought of doing what you suggested, but was worried about the potential for messing up my "real" catalog. If this is the only option, I think I'll just live with the flat keyword list for this project.
To answer your question about why I want to do this: I am exporting photos that I'm putting into a ZenPhoto gallery on my website. I'm resizing the images for the web, and I don't want the resized jpgs in my main catalog. The web jpgs will have something in the Rights Usage IPTC data that I don't want in my main catalog, so I wanted the web jpgs in a catalog to change the IPTC data, although I could do that in Bridge.

2 SATA drives - Where should I place my ACRcache, catalog, and images?

Two drives
Application is on the boot drive.
Where/how should I split up the ACRcache, catalog, and images?
Should I have the catalog on a different drive then the cache?
Should the catalog and cache be on the same drive?
thanks

Louie Sherwin wrote:
dorin_nicolaescu wrote:
I would put my catalog and images on one drive and have my system, applications and ACR cache on the other.
Why?
Hi Dorin,
Well basically there are four areas where disk I/O can impact performance. The catalog, previews, images and ACR cache. So with only two drives how do you minimize disk contention during typical LR editing?
Of the four the ACR cache activity is going to be both frequent and be writing large blocks data. Splitting it off first is makes the most sense. Putting it the system disk also makes sense since while running Lightroom that is going to be mostly idle since hopefully you are presumably just running LR.
The catalog is clearly going to have the highest update frequency but data sizes of each will be very small. So keeping it separate from the cache is a good idea.
The previews by default get stored with the catalog and since they are generated in the back ground with lower priority it is best to leave them where they are.
The image files clearly are best on the second disk. So practically it makes more sense to keep the catalog and images together if for no other reason than backup is simpler. Just clone you image disk every couple of days and you have a complete usable catalog.
-louie
Louie,
So, based on your experience, how would you go about it with a portable (I have a Macbook Pro). I have the application, catalog and previews on the boot drive, images on an eSATA 2TB RAID 0, ALRCache on another eSATA just straight 1TB - (all 7200 RPM / 32MB cache) via Expresscard 34 (which operates at 1.5)..
Jay S.

Export catalog with deleted items

Hi,
I would like to export catalog with deleted items on contracts.
I am actually using the class : /CCM/CL_CATALOG_EXPORT
But i don't have in result items deleted in contracts.
Can you help me?
Mathieu

Thank Atul for your answer.
>Which CCM version are you using ?
Version 2.0 ( CCM 200_640 0004 SAPK-26404INCCM CCM 200_640 : Add-On Delta Upgrade)
I read these notes, it is yet implemented.
I read the forum too and I am actually using the class /CCM/CL_CATALOG_EXPORT.
I made some changes :
Method GET_EXPORT
CALL METHOD gr_catalog_manager->get_catalog_data
 EXPORTING
 is_req_data = ls_req_catalog
 iv_with_deleted = ABAP_TRUE
 RECEIVING
 result = ls_catalog_header.
In GET_CATALOG_DATA
* read the header data
 result-component = gr_catalog_header_manager->get_header( iv_guid = gs_curr_catalog-guid
 is_req_data = is_req_data-component
 is_locale = is_locale ).
Parameter iv_with_deleted is not used !! Do you know why?
As well, I changed inside method DO_CONTENT_ITEMVAL two calls method :
(get_all_items, get_item_data) with parameter iv_with_deleted = true.
With these changes I have the deleted items from the procurment catalog in my export.
But if I delete an item in my contract following a generation of my contract catalog and my procurment catalog. This deleted item doesn't appear in my CC et PC. At the end, I don't have this item deleted in my export.
Maybe it is an mapping error, and I should map this deleted item to my procurment catalog... (It was in place before I came in this project, and I don't really know how it is done actually)
Or there is a solution to export deleted item in the contrat when I am exporting the PC.
Do you have an idea?
Regards and sorry for my english
Mathieu

Merging Lr2 legacy catalog with LR3 beta into LR3

My Lr3 beta catalog opened without a problem in Lr3 and was established as the default catalog .   My Lr2 legacy catalog was selected thru the by specifying the Lr2 catalog and it was updated successfully to work in LR3. So either catalog can be used in LR3 just by calling for it when launching the application.
But I would like to have a merged catalog so that I can use LR to do multiyear collections ...like my selects from Paris. So I created a new MERGED CATALOG and imported the LR3 beta catalog which worked . Then I repeated the effort with the Lr2 legacy catalog and it bombed after about 10 minutes with no error.
The MERGED CATALOG contained my LR3 .lrcat and I was adding the Lr2 legacy   .lrcat .   I believe I read that if you have any items in both catalogs it will create an conflict ...like two folders with the same name.
Looking for a way to get around this or at least to easily find the conflict?

I am using a similar process and getting a duplicate photo message and then the process aborts(so you have to watch it happen).   I first create new MERGED folder with one of the catalogs..by (1)creating a new catalog and (2)importing from an existing catalog (images are referenced in place) .   I can do this with either catalog and get a usable new MERGED catalog.
When I try to import the 2nd catalog ..I get a duplicate photograph message . Unfortunately I don t get a clean way of dealing with it as in your example.
So I believe we have the cause .but the strategy to clean this up looks wicked as I have 50K images in Lr2 and 10K in Lr3 beta.   If I can find them I can remove them from LR2 before I attempt to merge.   I could also have a problem with duplicate file numbers as I use the original camera generated file number (normally not a problem but a new body will start over so duplicates can occur).    Since I can create a new catalog with either LR legacy or Lr3 beta it has to be a conflict between the two.

I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv. I've been unable to locate an app that will do this.

I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.
I've been unable to locate an app that will do this. The Photos app that comes with the phone or iPad has extremely limited duration controls. PhotoStream seems to load everything from my phone or iPad not allowing me to just load up a set group of images.
iPhoto for iPad is getting some terrible recent reviews. I tried a couple other free apps but they don't use Airplay.
I can do something like this with iPhoto and my MB Air, but it's kind of ugly to have the computer open in order to connect by Airplay to my Apple TV. I've thought the iPad or iPhone would be a lower profile controller.
Am I out of luck?

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

WYSIWYG editor upload with images

Hello, friends!
I need help solving following problem:
I need to create WYSIWYG editor, which just to enter text and image. Other options (like font-size, font-weight...) not need. Then when submit the form with richedit, all data in form with images must sent to server.
1) images must upload
2) text must content following: text <img="src=../image1.png"> text <img="src=../image2.png"> text
or maybe all images must save as a blob data
Help me, people!

Is this an Oracle question?

Online banking site now shows login page as text-only; on different computer it still shows page with images and clickables -- is there a fix?

Previously when I logged in to my INGdirect online bank account, the login window came up showing images and clickable hotspots. Recently, the login window changed to a text-only version. On two different computers running Firefox, the login comes up in the previous version, with images and clickable hotspots. I'm unaware of having done anything to change my settings either in Firefox or on the banking website. Because it seems to be localized on this computer, I've tried downloading latest version of Firefox, but got no change, login still comes up in text-only format.

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Exception while Exporting Datagridview data with Images to Excel...

Hi Everyone,
I have datagridview in that 17 columns are text columns and 5 columns are Image columns,when I'm trying to export whole gridview data's along with images to EXCEL,getting "HRESULT:
0x800A03EC" Error..While debugging the code I'm getting the error on image column not able to export..
Can anybody help us to resolve this issue..
Here is my code which i used:
private void btnexportexcel_Click(object sender, EventArgs e)
try
SaveFileDialog savefile = new SaveFileDialog();
savefile.Filter = "Excel (*.xls)|*.xls";
if (savefile.ShowDialog() == DialogResult.OK)
if (!savefile.FileName.Equals(string.Empty))
FileInfo finfo = new FileInfo(savefile.FileName);
if (finfo.Extension.Equals(".xls"))
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
object misValue = System.Reflection.Missing.Value;
xlApp = new Excel.Application();
xlWorkBook = xlApp.Workbooks.Add(misValue);
xlWorkSheet = (Excel.Worksheet)xlWorkBook.Worksheets.get_Item(2) ;
int i = 0;
int j = 0;
for (i = 0; i <= dataGridView1.RowCount - 1; i++)
for (j = 0; j <= dataGridView1.ColumnCount - 1; j++)
DataGridViewCell cell = dataGridView1[j, i];
xlWorkSheet.Cells.Borders.LineStyle = Excel.XlLineStyle.xlContinuous;
xlWorkSheet.Columns.AutoFit();
if (cell.Value.GetType() == typeof(Bitmap))
string image =Convert.ToString(dataGridView1.CurrentRow.Cells[i].Value);
Excel.Range oRange = (Excel.Range)xlWorkSheet.Cells[i + 1, j + 1];
float Left = (float)((double)oRange.Left);
float Top = (float)((double)oRange.Top);
const float ImageSize = 32;
xlWorkSheet.Shapes.AddPicture(image, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoCTrue, Left, Top, ImageSize, ImageSize);
oRange.RowHeight = ImageSize + 2;
else
xlWorkSheet.Cells[i + 1, j + 1] = cell.Value;
xlWorkBook.SaveAs(savefile.FileName, Excel.XlFileFormat.xlWorkbookNormal, misValue, misValue, misValue, misValue,
Excel.XlSaveAsAccessMode.xlExclusive, misValue, misValue, misValue, misValue, misValue);
xlWorkBook.Close(true, misValue, misValue);
xlApp.Quit();
releaseObject(xlWorkSheet);
releaseObject(xlWorkBook);
releaseObject(xlApp);
MessageBox.Show("Excel file created , you can find the file " + savefile.FileName);
else
MessageBox.Show("Invalid file type");
else
MessageBox.Show("You did pick a location " + "to save file to");
catch (Exception ex)
MessageBox.Show("Exception Occured", ex.Message);
Thanks & Regards RAJENDRAN M

Hi Everyone,
I have datagridview in that 17 columns are text columns and 5 columns are Image columns,when I'm trying to export whole gridview data's along with images to EXCEL,getting "HRESULT:
0x800A03EC" Error..While debugging the code I'm getting the error on image column not able to export..
Can anybody help us to resolve this issue..
Here is my code which i used:
private void btnexportexcel_Click(object sender, EventArgs e)
try
SaveFileDialog savefile = new SaveFileDialog();
savefile.Filter = "Excel (*.xls)|*.xls";
if (savefile.ShowDialog() == DialogResult.OK)
if (!savefile.FileName.Equals(string.Empty))
FileInfo finfo = new FileInfo(savefile.FileName);
if (finfo.Extension.Equals(".xls"))
Excel.Application xlApp;
Excel.Workbook xlWorkBook;
Excel.Worksheet xlWorkSheet;
object misValue = System.Reflection.Missing.Value;
xlApp = new Excel.Application();
xlWorkBook = xlApp.Workbooks.Add(misValue);
xlWorkSheet = (Excel.Worksheet)xlWorkBook.Worksheets.get_Item(2) ;
int i = 0;
int j = 0;
for (i = 0; i <= dataGridView1.RowCount - 1; i++)
for (j = 0; j <= dataGridView1.ColumnCount - 1; j++)
DataGridViewCell cell = dataGridView1[j, i];
xlWorkSheet.Cells.Borders.LineStyle = Excel.XlLineStyle.xlContinuous;
xlWorkSheet.Columns.AutoFit();
if (cell.Value.GetType() == typeof(Bitmap))
string image =Convert.ToString(dataGridView1.CurrentRow.Cells[i].Value);
Excel.Range oRange = (Excel.Range)xlWorkSheet.Cells[i + 1, j + 1];
float Left = (float)((double)oRange.Left);
float Top = (float)((double)oRange.Top);
const float ImageSize = 32;
xlWorkSheet.Shapes.AddPicture(image, Microsoft.Office.Core.MsoTriState.msoFalse, Microsoft.Office.Core.MsoTriState.msoCTrue, Left, Top, ImageSize, ImageSize);
oRange.RowHeight = ImageSize + 2;
else
xlWorkSheet.Cells[i + 1, j + 1] = cell.Value;
xlWorkBook.SaveAs(savefile.FileName, Excel.XlFileFormat.xlWorkbookNormal, misValue, misValue, misValue, misValue,
Excel.XlSaveAsAccessMode.xlExclusive, misValue, misValue, misValue, misValue, misValue);
xlWorkBook.Close(true, misValue, misValue);
xlApp.Quit();
releaseObject(xlWorkSheet);
releaseObject(xlWorkBook);
releaseObject(xlApp);
MessageBox.Show("Excel file created , you can find the file " + savefile.FileName);
else
MessageBox.Show("Invalid file type");
else
MessageBox.Show("You did pick a location " + "to save file to");
catch (Exception ex)
MessageBox.Show("Exception Occured", ex.Message);
Thanks & Regards RAJENDRAN M

Problem in creating client side PDF with image using flex and AlivePD

I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
Atishay

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

CCM 2.0 Catalogs with Images

Similar Messages

Maybe you are looking for