CCM 2.0: Status of items is not changed in Master Catalog

Hello all,
when I upload the same items in Supplier Catalog in Master Catalog and Procurement Catalog for items status is not changed from "Approved" to "Not Approved".
Funny thing is that items need to be approved to go to Procurement Catalog from Master and to publish Procurement Catalog.
What to do?
Gordan

Hello Gordan,
do you mean that in CAT customizing you have your /ccm/master_catalog with "approved" value and the name of your procurement with "To approve" value?
Best regards
Jorge

Similar Messages

  • STMS problem ( import status - import runnig does not change)

    I have the same problem like this:
    While Transporting request in our production server the status of request from import running (truck sign) does not change.
    But the effect of the request is seen in the production but status does not change.
    see :Re: STMS problem ( import status - import runnig does not change)
    I did se14 as experts suggested, the history truck sign go away,seem work fine,
    but when new request need STMS to trans, the truck sign happened again,
    I need you help,thank you!

    thanks for all reply,
    the last two answers are the same,I think this is the right key,
    I'm a ABAPer actually,yesterday I asked our headquarters  basis to help,
    and I don't know what he did,now this problem is be solved,
    PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
    thanks again!

  • Sharepoint Designer - Two step List Workflow task item is not changing the status from not started to Complete

    Hi 
    Using SPD i am creating list workflow.
    Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected".
    Problem is "Assign a to do item" is assigning the task to manager. But after manager approves the status in the task list not changed to "Completed". Still it is showing "Not started". I dont want to manually complete the task.
    Please help me for automatic process. 
    What i should do to change the status to "Complete" automatically after manager approval
    Regards
    Jhanani
    Janani.R

    Hi Janani,
    From your description, you would like to create an approval workflow for a list. When an employee submit a request to the list, an approval task should be assigned to manager, then manager could approve or reject the request. From the request list,
    we should be able to see the Approval task’s status.
    Not understand the reason of designing the workflow to two steps, an approval action should be enough from my understanding. For producing, I create a list named Request list, then customize it in InfoPath form to add a Request field for stating request
    content. Then add a workflow to list named Approval task, add the action of Start an approval process with administrator and make the workflow automatically start when item is added.
    The image below shows the status of Adding items, Approving and Rejecting. Please check if it could meet your requirement.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • Status of Sales Order not changing

    Dear Gurus,
    Our client's document generation process is that they make a Sales Order for say 100pcs to their Dealer and then the Dealer wants the client to send them 20pcs on a perticular day. To inform the Plant to dispatch 20pcs to the Dealer on that day, client makes another Sales Order (referencing the first Sales Order) for 20pcs on the day of requirement, which the Plant accordingly dispatches after VL01n and VF01.
    Now the issue is since we are referencing OR doc type with another OR doc type, system is not changing the status of the first OR even after complete reference, but the second OR is changing to 'Completed' after full referencing to an OBD.
    I checked all the combinations but it is not changing. I tried many combination in VTAA for OR to OR and also in VOV7 for diff combinations of Completion Rule.
    What else can I do? Kindly help me out here, for which I will ever be greatful.
    Thanks and regards
    Venkat - Hyd

    wrt: your requirement, have tested & found source doc OR- status is not updating.
    But it seems  its std behaviour of SAP
    eg:
    As we know,-Sales Order status will be update based on std customization @ Copy Control / Source doc item category level.
    Where as in Std OR - once we create the delivery wrt:OR, then based on copy control maintained as said by the other mates, Order status will get updated accordingly.
    Here, OR is created ( updated in delivery due list, status is open).
    Now you created another OR wrt: first OR, then there is conflict, in order status updation, because here source document is same in both the cases ( creating subsequent document of Source doc & second OR).
    But as per system, first OR status is getting udpated once delivery is created, until then it is in "OPEN" status only, though you create one more OR wrt:first OR.
    NOTE: if it is your client requirement you have to go for new documen type ( in std: its given as Contract / Quotation etc..,)
    Small observation is, in VTAA Copy control from OR-OR,
    status will not get update & the document flow is left blank. Which means, this flow can be used to just create a copy of the actual document  w/o updating the status, assumes it can be used to send an order confirmation for a single material , where in actual document contains multi materials.( its just an eg: may not be for single material, could be for any reason)

  • Import status- import running does not change during the mass import of TR

    Dear All,
    I have successfully imported single requests in my newly installed SAP ECC EHP4 PRD system but when I have tried to import 8 transport requests(Mass Import) then the Import status is not changing from import running (Truck button still appears).
    But the effect of the request is seen in the production system but the status does not change.
    I have checked the logs and found that all the requests have been imported successfully but the Truck status does not change.
    I have restated the system but no use still the same.
    Thanks in Advance...
    Latha

    Import Running for a long time on ECC 6.0
    The background job RDDIMPDP is running on client 000 as well as the relevant client.
    Below is the TP System Log:
    WARNING: System CC6. Warning. 20090914042136 :
    WARNING: Background job not running properly. Function: G Jobcount: 04512801 Status: S.
    Please check the system. Use transactions SM21, SM37, SM50.
    WARNING: (This warning is harmless if no further warnings follow.)
    As per NOTE: 26966, it could be b'cause the background job process slots are occupied,
    Regards
    Vikas Nagar

  • Why some items can not change issue method in Production Order?

    Hi,
    I have a Production Order which had been released.
    As some reason, I need to change issue method on some items in this Production Order, but I found that some items can be changed with a dropdown list, and some items can not be changed without dropdown list.
    Why they are different?
    What should I do to meet my users' request?
    Thanks.

    Hai wilson,
    sorry i visits forum after long time .. item category means , when create item group there are two option Service / Material if u select service , inventory come under that group only in "Back flush" other wise u can select "Manual / Back flush"
    Regards
    Janeesh

  • Incomplete status of scorm file not changed

    Hi,
    We are having the following problem, which I hope you can
    help me with to solve.
    We have created a E-Learning training which is SCORM
    compliant into our LMS. When we start the training and exit it with
    the exit button in the control bar, before the movie is ended, the
    LMS report the training status as incomplete, which is working
    correct.
    The problem starts when we restart the same training. At the
    end of the training there is an option, which should be chose,
    which give a score of 10, after which the training is automatically
    closed. The LMS registers the score of 10 but the movie keeps the
    status of imcomplete. We had a thorough look at the report send to
    the LMS after the second attempt and it looks like, although the
    score is now part of the feedback, the status is still incomplete.
    This problem does not occur when we start the training for
    the first time and let it run until the end. Then the feedback to
    the LMS has a score of 10 and the status us completed.
    FYI, we set the pass/fail setting in the scorm file reporting
    to value 10. Which should work correctly.
    We could also put a complete of incomplete value in the LMS
    but that functionality is not available in our current LMS.
    Is there anybody that has a solution for this because this
    problem is currently forcing us to postpone the go live of the LMS.
    Kind regards
    Erik

    Hello Gordan,
    do you mean that in CAT customizing you have your /ccm/master_catalog with "approved" value and the name of your procurement with "To approve" value?
    Best regards
    Jorge

  • Items are not displaying in internal catalog after Linux and COA change

    Navigate to iProcurement Responsibility
    1.Select "ITAM" catalog and enter % to serach ITAM field and click on "Go" button.
    2.And it is returing "No results found. " messgae.
    Recently Moved from HP-UX to Linux x86-64. also changed the COA segments
    Can you please help

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • Item category not change able after saving

    Hi guys,
    I have a problem (ECC 6.0).
    After saving a sales order, I'm not able to change the item category for the added item after saving the document. It's some kind of service material (DIEN) to charge labour to the customer.
    I found that if I maintain the MRP3 view with the strategy group 10, I'm able to change the category after saving. But as the MRP views are disabled for service materials (DIEN) and there's no need for MRP for service materials, I don't get rid of the problem.
    Please help me to solve that problem.
    Best Regards,
    Florian

    Normally If it is open sales order then you can able to change the item category provided manual item categories available in T Code - VOV4, if there are any subsequent documents are there then you are no longer to change the same.

  • Dunning block on Line item but not in customer master data

    Hi,
    What is the procedure to block a customer for the dunning process?
    I have following example:
    1. A dunning block was entered in an invoice line item (there was no dunning block in the customer master data)
    2. A dunning run was made
    3. A dunning letter was printed for the customer
    Is the block in the master data required for preventing a dunning for a customer?
    Thank you for your feedback.
    Kind regards,
    Linda

    Hi Linda,
    You can block the items of a customer without blocking his account completely by allowing his account for dunning program.
    1. Allow the customer account for dunning
    2.Edit the dunning proposal and block the items individually to the customer and save.
    3.Now you can see the dunning notices for only unblocked items of the customer.
    Thank you,
    Ramesh.

  • Detail Table Not Changing When Master Table Selection Changes

    Using JDev 11.1.1.6.
    I am working through some Oracle tutorials (Storefront Demos).
    I am accessing the Fusion Order Demo (FOD) schema.
    I have created VOs based on BCs for Categories, Subcategories and Products.
    I have added all to my data model and tested functionality using the AppModule.  This works as expected.
    When I drag the Subcategories onto my jsf page as Master-Detail (Table-Table), the initial list is based on the first index of the BrowseCategory data control.
    When I click on another row in the master table, the detail table refreshes but the same data appears.
    I confirmed that the selection changes on the master table.
    I added a button on the page and checked the BrowseCategoryIterator using some backing bean code and the iterator remains on the first record.
    I checked the SelectionListener on the table and it is set correctly as   "#{bindings.BrowseCategory1.collectionModel.makecurrent}"
    Does anyone have any idea why the detail table is not getting updated based on a relationship to the master table?
    Thanks,
    Raymond

    Hi,
    From what you are saying:
         1. it's working in application module tester
         2. you verified the current row of the iterator and you found that it is stuck on the first row
    The problem is then that the selection in the table is not setting the current row in the iterator.
    Try to add a custom selection listener where you just execute the "#{bindings.BrowseCategory1.collectionModel.makecurrent}" expression. this is just to make sure that the listener is being called.
    Also, the problem might be that the current row is correctly set by the table selection, but later in the life cycle it is being reset. so maybe you can also overwite the methods that set the current row in your VOimpl (again by jsut calling the supper) to check if and when these methods are called.
    Regards,
    Elias.

  • AS - all page items, access not allowed

    I am upgrading an AppleScript from working with InDesign CS5.5 to CS6.    When I recompile I get the syntax error:
    "Can't set <<constant dpvtdppv>> to <<class aPgi>>.
    Access not allowed."
    My statement is a simple
    "set pList to get all page items" within a tell myDoc section.
    In reviewing the AS guide for InDesign CS6, the notes say that Chapter 4, covering all page items,  was not changed in CS6.  Page 113 of the guide phrases the statement without a "get", so my statement would be
    "set pList to all page items".  This fails with the same error.  As my code gets plenty of use under CS5 and CS5.5, I suspect a dictionary error from Adobe.
    Anyone with ideas?

    G'day
    try :
    set pList to every page item
    m.

  • Exporting catalog, making changes, then importing catalog does not update file movements and deletions

    I export part of my master catalog to a laptop.  I include the image files so I can edit the files at full res.  After managing and editing files I import the catalog back into the master catalog. When importing I check to replace metadata, develop settings and negative files. I have been running some tests to be sure all my work is being captured in the master catalog by this process.  I find that if I change develop settings or photo ratings this is detected when the file is imported and the data in the master catalog is updated properly.  The surprise is that if I delete files or move files among folders in the exported catalog these changes are not detected and these changes are not updated inthe master catalog.  It seems bizarre to me that such changes are not detected but I do not see how to get LR to recognize these changes and include them in the catalog update.  Without this capability I don't see how to use catalogs to move part of a catalog to another computer for edits and file management and then move back to the master catalog.

    There are various reasons why Lightroom works this way, but you'll need use pick flags to indicate photos to be deleted, and other metadata like colours or collections.

  • Facing the error : Status and active flag in one item do not match

    Hi Experts,
    I am getting error : Status and active flag in one item do not match in GOA distribution and while adding item in the item data , following are the relative information :
    I am using SRM 4.0 and Item is free text.
    Please help if you have faced such an error.
    Thanks,
    Atul

    question not clear. you have activate one line item and the same not in ECC contract.
    for ex
    4600001000 - GOA
    item 1 - active
    ecc
    4600001000 - contract
    item - inactivate
    -locked
    muthu

Maybe you are looking for