CCM 4.2.3 Extension Mobility
Hello,
I'm configuring the Extension Mobility Service but I found a very strange failure.
1) I have configured the Extension Mobility Service ( http://10.10.1.1/emapp/EMAppServlet?device=#DEVICENAME# ) and i did subscribe under every phones.
2) I've created the Device Profiles for every phones.
3) Under Global Directory I did insert the users and they control own device and extension mobility feature
When the user click the "World Button" on the phone it appears not the Extension Mobility Feature but the message: " MAC-ADDRESS NOT AVAILABLE .
I did attach the version and CCM's details.
Someone has had before the same problems ?
hi,
please can you tell me what is configured in the menu :
"System - Enterprise Parameters - URL Services"
http://CallManager-IP-Address/CCMCIP/getservicesmenu.asp
If so look whether IP-Address or DNS-Name of the Call Manager is configured
regards
alex
Similar Messages
-
Ccm 4.1.3 : Extension mobility error [10]
Hello,
CCM is integrated with Active Directory, passwords of CCMadministrator and CCMsysuser are syncronized.
When users try to login into extension mobility service they receive error [10] which is:
Proxy Authentication Not Allowed: the appID that is specified does not have rights to log in or log out other users.
I guess that appID is CCMSysUser here, so where could these right could possibly be turned on? I've tried looking in the attributes of CCMSysuser in Active Directory - no luck, nothing like proxy rights/auth found.No luck.
Tried reinstalling LDAP integration plugin, installation completed OK, but password fields of ccmadministrator and ccmsysuser in the CCM's regisrty became empty.
After putting there encrypted password (passwordutils.exe) and restarting IIS ADMin/TOmcat i receive error [10] again.
Any suggestions please?.. -
Extension mobility redundancy in CUCM 8.5
Hi ,
I have a doubt in cucm 8.5 extension mobility redundancy.
I have 3 call managers in cluster.
1. X.X.X.1 - punlisher
2. X.X.X.2 - sub1
3. X.x.X.3 - sub3
i have configured CUCM X.X.X.2 (sub 1) for extension mobility URL and in exterprise parameter configuration also (service URL). all phones are subscribed this URL and users login.
my schenerio is,
if SUB1 goes down, i change enterprise parameter service URL IP to punblisher. is that enough for users to login to extension mobility?
my doubt is,
in the above schenerio,
users press services button, request will go to enterprise parameter URL> enterprise URL will check for subscribed services> and route the request to the subscribed services for the phones . but here i have subscribed only EM service which has sub1 IP address.
how user can login?
if users can login meas, how that works.
or do i need to create 2 EM service (one for SUB1 IP, another one for PUB IP) and subscribe all the phones with both the services?
so that if subscriber fails user will login another service with has publisher IP?
I have activated EM service in all call managers inthe cluster.
please clarify my doubts.
thanksHi
Yes , the extension mobilty HA is avilable starting from V8 .On earlier verions as v 7 is not supported, Please find the below link:-
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/cmapps.html#wp1189079
I think you have to deploy SLB (server load balancer) to distribute requests through servers . You can use load balancer as (F5 , or DNS round robin).
Note:The problem , is that the "Login" and "Logout" service URLs can really only point to one IP address. Please find the below solution based on DNS:-
- create multiple DNS records for the same name which will point to two CCM servers running the EM service
- point your EM service URL at that hostname which you have created on 1 step.
- ensure your phones have valid DNS servers assigned to resolve the above
Note: the problem on the DNS is the delay between requests.
Thank you
please rate all useful information -
Extension Mobility Failover mode
CCM 4.1(3)
We discovered yesterday during failover testing that Extension Mobility does not function when CCM PUB is down. When pressing the services button on the phone the message "Requesting" displays, and the services menu does not populate. Is this an expected loss of functionality with the PUB down or does this sound like a Configuration problem? EM functions normally with the PUB on line. ThanksThere is no failover for EM in 4.1(3)
There are some features and functions that require access to the master database on the publisher because they make modifications to records and therefore need write access. The publisher is the only server in a Cisco CallManager cluster that has a read and write configuration database. The main features and functions that require access to the publisher for write access include:
?Configuration additions, changes, and deletions
?Extension Mobility
?User speed dials
?Cisco CallManager User page options requiring the database
?Cisco CallManager software upgrades
?Call Forward All changes
?Message Waiting Indicator (MWI) state
Other services or applications might also be affected, and their ability to function without the publisher should be verified when deployed.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a0080447510.html#wp1045103
Regarding the services, the URL may be pointing to the PUB, and HTTP request are sent to PUB.For this you need to create a DNS entry which responds to this request no matter if Primary server is offline.
G -
Extension Mobility doesn't work
Hello,
I want to implement Extension Mobility service. I have followed the setup step by step. But when I select my login/logout service, I receive an error "Login Insuccessful" Error: [6].
The IP Phone doesn't prompt me to enter my UserID and PIN.
In the EM Traces I have:
%EMApp-3-UNK:Error while getting dir handle: DirUser.OperationError
%EMApp-3-UNK:Unable to establish dir connection :DirUser.OperationError
For information the CCM are not yet registered to the DNS and I used the LMHOST file.
Thanks you for your help,
Regards,
JPBIts very likely the CCMSysUser user account password has not been updated on Callmanager and AD server and you may be having authentication problems between the ip phones services on Callmanager to Active Directory.
-
Problems With Extension Mobility
I have made each step to configure "EXTENTION MOBILITY" in the Call Manager 4.3 (Guide: Cisco Unified CallManager Features and Services Guide, Release 4.2(3) [Cisco Unified Communications Manager (CallManager)]), but my configuration in the CCM fall :(, when I try to accede to the service on the telephony IP and I ingress the username and the PIN configureds en el CALL MANAGER, and the display in the phone show "Authentication Unsucessfull", and the username and password are correct, I don't understand :( ....
do you have the users associated with the device profile? (option extension mobility in the users option)
-
CUCM 8.6.2 - SURL Buttons Issue related to Extension Mobility
Hello Guys,
we are running a CUCM 8.6.2.22900-2 with the extension mobility service. One the user device profiles we have applied several third application services via SURL buttons. Actually I though it does not matter, what device type I choose during the UDP Creation. The Buttons should appear on every model, which support SURL.
When I log into a 8945 with a 9971 user device profile, the SURL buttons do not show. It only works, if I create a dedicate UDP Profile with the 8945 type as base. The same for other models of the 89er/99er Series.
Can you help? Is this a bug?
Thanks.Chris:
Thanks for the input. We do have the LDAP configured, we are using LDAPS. It is looking like port 636 form the CUP server is trying to reach out to the AD server so we are opening up that port to test if that is out issue. 636 is open from CUCM to AD but not CUP to AD.
TD -
Extension mobility logout issues UCM v 6.1
Hi, I am using UCM v6.1, with a Pub and Sub. I have deployed handsets out using auto-reg. I have created user device profiles and associated those the users. I have subscribed the services to the autoregistered phones by using BAT to bulk update , using bulk admin->phones->update phones->phones query.
The users press the services key and have the extension mobility and logout options. They can login to their Device profiles ok but when I attempt to log them out i receive an error on the lcd "logout unsuccessful [6] database error".
I have attempted to locate the actual device and log the user out manually using the CCMadmin GUI, however i receive a message ,
"Error occurred while retrieving information from database. No LOGOUT device profile".
According to the documentation, wgen selecting a log out device profile you choose "use current device settings". I left this as default when bulk updating the phones.
I have restarted the extension mobility service on Publisher and Subscriber, and have also shutdown the servers and rebooted - but to no avail.
I am doing something fundamentally wrong or could this be a bug? I have found a few in v6.0, which is why i upgraded to 6.1. thanks.Hi Stuart,
It does sound like this bug (somewhat);
CSCsj33055 Bug Details
bulk insert phone or UDP does not add phone service if no svc parameters
Symptom:
Insert UDP fails to insert IP Phone Service if there are no parameters to all
Device Profiles.
Conditions:
'Insert UDP' in Bulk Administration Tool [BAT] doesn't insert IP Phone Service
for all the Device Profiles if no parameter is defined on the Phone Service.
This also happens when the UDP template is not subscribed to the Phone Service.
And this Insert UDP works fine in inserting the IP Phone Service to all DPs if
you are doing one record at a time, it fails if you do it in a BULK.
Workaround:
For Device Profiles:
1. Using a template
- Add a dummy parameter to the EM service. Save it and click on Update
Subscriptions.
- Subscribe EM service on the UDP template. Ignore if already done.
- Upload the Insert file for specific details transaction.
- Submit a job with the uploaded file and the UDP template on which EM is
subscribed.
2. Using a CSV file
- Add a dummy parameter to the EM service
- Specify this dummy parameter with blank values in the CSV. Sample file below
- Upload the Insert file for specific details transaction and submit a job
Once you have inserted DPs, you can go to IP phone service page, select the EM
service. Delete the dummy parameter and click update subscriptions.
sample:
DEVICE PROFILE NAME,DESCRIPTION,DIRECTORY NUMBER 1,SERVICE NAME 1,SUBSCRIBED
SERVICE NAME 1,SUBSCRIBED SERVICE NAME ASCII 1,PARAMETER NAME 1,PARAMETER VALUE 1
DP-1,DP1,2001,Extension Mobility,Extension Mobility,Extension Mobility,dummy,
DP-2,DP2,2002,Extension Mobility,Extension Mobility,Extension Mobility,dummy,
For phone devices:
1. create bat phone template and subscribed it to the EM service
2. define an update phones job:
enable extension mobility
log out profile: use current device settings
add services from this teamplate: run immediatelyMake sure to check the box to the left of the line item in the BAT job definition. That signifies to BAT that wish to synchronize all selected phones to the value specified.
I would open a TAC Case.
Hope this helps!
Rob -
Extension Mobility in CUCM 7.1: How to send Userid and Pin with Service Par
Hi at all
is it possible to configure the IP Phone Service (CUCM 7.1)for Extension mobility so that when a user login in EM they dont need to insert the UserID and UserPin???
I think it could work with the Service Parameter but I dont know how.
Have somebody an idea?
Thanks.
kind regards
JoséHi!
As far as I know that's not possible and it will defeat the purpose of using Extension Mobility as anyone could login from a phone with no credentials. Porbably you could configure a script or something that allows you to accomplish this, but it won't be supported.
Regards,
Teresa.
If you find this post helpful, please rate! :) -
Multi forest LDAP and Extension mobility
hello,
We want to support the following configuration:
MultiForest LDAP integration with CUCM 10.5.
So we want to set the "LDAP Attribute for User ID" on UserPrincipalName (UPN). > [email protected]
We also want to support Extension Mobility.
Is there a way to make te login proces easier than logging in with [email protected] and the PIN code?Unfortunately no, the EM process uses whatever you chose for userID for the login.
-
extension mobility - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone? thanks
Yes, or simply configure 1 UDP and default device profile for the other one.
EDIT: and actually with those models, you should be able to use just one
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_011000.html#CUCM_RF_EDCB3C30_00 -
CME Extension Mobility, SIP configuration
Hi,
Need help with CME Extension Mobility with SIP Phones (7841). I'm using CME 10.5 and I configured the parameters below for extension mobility but the phones won't register right after I put the logout profile in the voice register pool.
They work normally when not in Extension Mobility though. Please help I need to deploy this to my customer soon.
hostname Router
boot-start-marker
boot system flash:c3900-universalk9-mz.SPA.154-3.M2.bin
boot-end-marker
no aaa new-model
no authentication logging verbose
ip dhcp excluded-address 192.168.1.1 192.168.1.20
ip dhcp excluded-address 192.168.1.254
ip dhcp pool Phones
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
option 150 ip 192.168.1.254
no ip domain lookup
ip cef
no ipv6 cef
multilink bundle-name authenticated
cts logging verbose
voice-card 0
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/1.10
bind media source-interface GigabitEthernet0/1.10
registrar server expires max 600 min 60
voice register global
mode cme
source-address 192.168.1.254 port 5060
max-dn 110
max-pool 110
load 7841 sip78xx.10-1-1SR1-4
time-format 24
date-format D/M/Y
service https
url authentication http://192.168.1.254/CCMCIP/authenticate.asp
tftp-path flash:
create profile sync 0002641841434163
voice register dn 1
number 6001
name Poh Huat - 6001
label Poh Huat - 6001
voice register dn 4
number 6005
name Coordinator - 6005
label Coordinator - 6005
voice register pool 1
logout-profile 100
busy-trigger-per-button 2
id mac 547C.69D6.1AB6
type 7841
voice register pool 4
logout-profile 100
busy-trigger-per-button 2
id mac 547C.69D6.1A2F
type 7841
voice logout-profile 100
pin 1234
user 6000 password 12345
number 6000 type normal
speed-dial 1 999 label "EMERGENCY"
voice user-profile 1
pin 12345
user richard password richard
number 6001 type normal
speed-dial 1 996506901 label "Richard"
voice user-profile 2
pin 12345
user 6005 password 12345
number 6005 type normal
license udi pid C3900-SPE100/K9 sn FOC16145MQA
license boot module c3900 technology-package uck9
username xtra privilege 15 secret 5 $1$STRs$Qsuesm8dF23Okof.vRyf5.
redundancy
ip ftp username xtra
ip ftp password xtra2006admin
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address dhcp
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1.10
encapsulation dot1Q 10 native
ip address 192.168.1.254 255.255.255.0
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
no ip http secure-server
ip http path flash:
nls resp-timeout 1
cpd cr-id 1
tftp-server flash:PHONES/sip78xx.10-1-1SR1-4.loads alias sip78xx.10-1-1SR1-4.loads
control-plane
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
mgcp profile default
gatekeeper
shutdown
telephony-service
authentication credential 6000 12345
em keep-history
max-ephones 110
max-dn 110
service phone webAccess 0
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Mar 05 2015 15:50:52
I have turned on debug ip http all and debug voice em-profile on and right after I entered the logout profile 100 under pool i get the following logs.
Router(config-register-pool)#
Mar 5 16:15:28.299: Thu, 05 Mar 2015 16:15:28 GMT 192.168.1.21 /CMEserverForPhone/serviceurl ok
Protocol = HTTP/1.1 Method = GET Query = locale=English_United_States&name=SEP547C69D61A2F
Mar 5 16:15:28.299:
Mar 5 16:15:28.299: Getting SIP phone index by IP address 192.168.1.21
Mar 5 16:15:28.299: SIP phone 4 found with contact IP address 192.168.1.21
Mar 5 16:15:33.363: Thu, 05 Mar 2015 16:15:33 GMT 192.168.1.21 /CMEserverForPhone/serviceurl ok
Protocol = HTTP/1.1 Method = GET Query = locale=English_United_States&name=SEP547C69D61A2F
Mar 5 16:15:33.363:
Mar 5 16:15:33.363: Getting SIP phone index by IP address 192.168.1.21
Mar 5 16:15:33.363: SIP phone 4 found with contact IP address 192.168.1.21
Mar 5 16:15:37.539: Thu, 05 Mar 2015 16:15:37 GMT 192.168.1.21 /CMEserverForPhone/extensionmobility ok
Protocol = HTTP/1.1 Method = GET
Mar 5 16:15:37.539:
Mar 5 16:15:37.539: Getting SIP phone index by IP address 192.168.1.21
Mar 5 16:15:37.539: SIP phone 4 found with contact IP address 192.168.1.21
After this the phones are still not registering, I'm suspecting it is the url authentication command, as i can't put the application-name and password after the command, any suggestions would be appreciated. THanks in advance.
-richardTry adding:
voice register global
url authentication http://192.168.1.254/CCMCIP/authenticate.asp secretname psswrd
if still doesn't work try to compare your config with the reference guide here:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmemobl.html#pgfId-1163414
-Terry
Please rate all helpful posts -
How to Configure Extension Mobility
Hello friends,
I am presently at crossroad on getting Extension Mobility to work on a CUCM 7(1)2. I have exhausted as many cisco docs on doing this. Please can someone who has not got just the book knowledge but with experience(s) should please give me a detailed step by step way in getting it configured and working!
Thanks!If you're following this doc:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsgd-712-cm/fsem.html
And still can't make it work, you're doing something wrong, that's the doc everyone who has configured EM (and 90% is the same no matter the version) has followed to configure this.
Read the doc, digest the info, then carefully go step by step thru the config. -
Strange problem with Extension Mobility and Click to Call
Can anyone explain how is it possible ? Any ideas, guys?
CUCM 7.1.3
PC1 with IP comm. and user1 is logged in to Extension Mobility + Click to Call. User1 can make a call using Click to Call.
PC2 with IP comm. and user2 is logged in to Extension Mobility + Click to Call. User2 can't make a call using Click to Call.
The following error appears on the PC2 screen:
"The call failed. Please ensure you are logged into your Extension Mobility device. If the problem persists contact your phone administrator"
Here is the log from PC2:
2010-02-03 12:49:46,781 [16] INFO - 1 devices returned from ParseDevices
2010-02-03 12:49:46,781 [16] DEBUG - 0) MY IPC - Cisco IP Communicator - SEP0022680B43E9
2010-02-03 12:49:48,703 [1] DEBUG - entering FindCallRecord - 26468949
2010-02-03 12:49:48,703 [1] INFO - matched tag with call record - 26468949
2010-02-03 12:49:48,703 [1] INFO - action - new call: ct:Click to Call;rt:20100203-12494870;pn:26468949;pt:;cn:desk phone ct:;desk phone rt:;desk phone pn:;desk phone pt:;soft Phone cn:soft Phone ct:;soft Phone rt:;soft Phone pn:;soft Phone pt:;soft Phone cn:
2010-02-03 12:49:48,734 [1] DEBUG - ClickToCallDialer server and port10.100.3.1:8443
2010-02-03 12:49:48,734 [1] INFO - make call through WD - 26468949
2010-02-03 12:49:48,734 [1] INFO - MakeCall: user(a.koltalo) to(26468949) with profile(a.koltalo;Extension Mobility Phone;;True)
2010-02-03 12:49:51,859 [1] ERROR - make call failure through WD - CALL_FAILURE_ERROR
2010-02-03 12:49:51,859 [1] DEBUG - entering WriteRecord - 26468949
2010-02-03 12:49:51,859 [1] INFO - record already exists, go through records to remove matched record - C:\Documents and Settings\Jevgenij\Application Data\Cisco\Click to Call\Data\Outbound\26468949.xml
2010-02-03 12:49:51,859 [1] DEBUG - entering ReadRecord - C:\Documents and Settings\Jevgenij\Application Data\Cisco\Click to Call\Data\Outbound\26468949.xml
2010-02-03 12:49:51,875 [1] DEBUG - push call record into stack
2010-02-03 12:49:51,875 [1] DEBUG - write record into file
2010-02-03 12:49:51,875 [1] INFO - outbound call record changed, fire event to notify
2010-02-03 12:52:08,484 [17] DEBUG - ClickToCallDialer server and port10.100.3.1:8443
2010-02-03 12:52:08,593 [17] DEBUG - entering QueryDevices - 10.100.3.1 - a.koltalo
2010-02-03 12:52:08,656 [17] INFO - return success from GetDevices -
User2 moves from PC2 to PC1 - run IP comm. do loggin to Extension Mobility and run Click to Call with his credentials. User2 can make a call using Click to Call
User1 moves from PC1 to PC2 - run IP comm. do loggin to Extension Mobility and run Click to Call with his credentials. User1 can't make a call using Click to Call
PC2 and PC1 - have the same configuration and software installed, both PCs are on the same LAN subnet. There are no any firewalls between PCs and CUCM server.Sounds like a possible permissions issue on the workstation to me. Have you tried configuring one of your test users as the local admin on the workstation?
-
Extension Mobility not working properly
Dear All,
I would like to ask about extension mobility on my Cisco Unified Call manager 8.5. The problem is when I press services button then Extension Mobility the put the User ID and Pin, the login was successfull but after that there's no change on IP Phone screen.
After I check on Cisco Unified Call Manager -> Devices -> Phone -> Actively Logged In Device Report I was found that my ID already login on IP Phone, but like I say before there's no change on IP Phone, my Directory Number, Name also not appear.
Did anyone experiencing same issue above? Or anyone know how to fix issue above?
Please let me know, I'm very appreciate to all of you that help and contribute on this discussion
Best Regards,
Nanda NurhadyanNanda,
Have you created a Specific Device Profile with your DN and name? You will need to do that, and then you will need to go in to your end user account and make it a controlled profile.
If you do not have a device profile specific for you, you are probably getting the default device profile that doesn't have any DN associated with it.
Let me know if this helps.
Dallan
Maybe you are looking for
-
Can't download i06 to my ipod touch, why?
I own an ipod touch 4th gen. Why can't I download io6?
-
Filevault and PowerPoint 2008, Excel 2008
Hi, Since I got no answer from Microsoft, I thought I try my fellow Mac Users. My Company requires FileVault be activated on all Mac laptops. With 10.5.x and Filevault enabled, we can not save Excel 2008 or PowerPoint 2008 documents. Word 2008 docume
-
I am going to Fiji and the only internet access that I will have will be a USB stick connected to my MacBook pro through ISP provider over there vodafone. Can I use that Internet connection to create a wifi network so I can use my iPad and iPhone?
-
For the life of me, I would think the ability to give a user their W2 would be standard delivered in the business package for ESS. We're using Netweaver 7.0 enhancement pack 1. I cannot find the iview for W2. Where is it? Do I need to activate som
-
Add third level submenu to spry menu bar
I want to add a third level submenu to my Horizontal Spry Menu Bar. I have read that I cannot do this in design mode but rather have to program it in using the code view. Does anyone know how to accomplish this? Thanks so much!