[CCM 5.0/perfmon] Adding a counter for a none-existing instance

Hello,
I'm having the following issue with perfmon when adding a counter to a session (with perfmonAddCounter) :
I'm trying to add this counter "\\ccm1\Thread(test)\% Processor Time" BUT the instance "test" does not exist on the server. I would expect to receive an error (like under CCM 4.2) but it's not the same behavior.
And even worse : When I use perfmonCollectSessionData to collect the data, I'm getting an entry for this "gost" counter and its value is 0 and maked as good.
The only way to workaround this is list all instances before adding the counter to check if the instance exists or not.
Have you seen the same behavior ? Is it a bug ?
Thanks
Seb

Try bug - CSCsb01541

Similar Messages

HT5616 I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

I have an apple id; but when I try to sign in to iCloud, I get the msg that the apple id is not an iCloud account. However, apple was able to bill me for my non-existent iCloud account. How does that happen?

If you didn't create an iCloud account on an iOS device or Mac, you don't have one. You can't create an account on a PC. If you were charged for an iCloud storage upgrade without having an account, contact the Apple online store at the bottom of this page for a refund.

PE12: asking "Where is file..." for a non-existent file

When opening a project in Adobe Premiere Elements 12, I'm getting the "Where is file..." pop up window. It's asking ...
"Where is the File 'C:\Program Files\Adobe\Premiere Pro 1.5\Presets\Textures\Business Title_7.tga'?"
Which is odd because I didn't use any such file in the project, I only have Adobe Premiere Elements 12, and this is installed on a MacBookPro. So I'm not sure why it's looking for a tga file in a Premiere Pro folder in a non-existent C:drive.
I only have two video clips in this project. I'm using the cross-fade transition between titles and clips. The title template I'm using is "RedBulbs_Title". I've duplicated it several times and I seem to get that same "Where is.." pop up, one for each time I've used the "RedBulbs_Title" template.
Am I missing something in my installation?

A.T.
I have a new project that I've created in Pe12. I get the message every time I open the file to continue editing. So, I created it, edited for a while, and save. When I open the file again, days later, I get the error.
It does seem to be related to the titles in Pe12. The error seems to occur once for every time the title template is used. I dismiss the error saying the file is Offline so that I can get to the project and continue working. Even though the file is considered "offline", the video doesn't seem to be mising any components.
I'm useing Pe12 for Mac, purchased new from Amazon.com. It was a clean install. There was no previous installation of Premiere Pro or Elements.
I have not imported any jpegs. My source files are .mp4 and the title graphics within Pe12. It's a very simple project.
The strangest part for me is seing a Windows error message on a Mac. I've never even opened the Windows install disk for Pe12, much less used it in the Mac.
Using Finder to search for the missing file returns no results as if the file doesn't exist anywhere on the Mac.
Am I correct in that the Title clips in Pe12 are not on the installation but on the internet? I seem to recall that the Title files had to download the first time I used a particular title in Pe. Could it be a problem with the downloaded files?
I'm re-installing Pe now. I'll let you know how that goes.
Re-installed over previous install hoping to avoid losing anything. Big mistake. Everything just crashes now. Uninstalling everything, preferences and all, and will do a clean install.
more to come.

SAP EP - How to redirect in case of a reqest for a non-existent portal pag

Hello,
I am not 100% sure if this is the right forum to ask my question but I will give it a try anyway.
I would like to customize the error handling of the SAP EP 6.0 in the following way. If a user tries to access a page of the portal that does not exist, the user should receive an error page describing the problem occured and should be redirected to the homepage after a short period of time.
In a portal environment with default configuration the user would immediately be redirected to the homepage. There is no error message displayed.
Does anyone know where to start digging? I think I need a better understanding of SAP EP error handling. I appreciate all answers, hints and suggestions.
Cheers
Martin
Message was edited by: Martin Kellermann
Message was edited by: Martin Kellermann

Hi guys,
I am sorry to start discussion on that topic again. But I definitely need some help. Due to Samuli's help I have been able to modify the error handling of the portal in the following way.
Customization:
User attempts to access a wrong url within the portal (e.g. http://<portal_server>:50000irjportalwrongurl). Instead of the standard "404 the requested resource is not available" error page I see my own error page. That's nice.
What did I do:
I added the following lines to the portal's web.xml (/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-infweb.xml):
<error-page>
<error-code>404</error-code>
<location>/customerrors/404.html</location>
</error-page>
Additionally, I created a the 404.html file and put it in folder (/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/customerrors/.
What else?
Well, I am using KM to make files accessible through the EP platform. If I access a KM file via the portal (http://<portal_server>:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/Public%20Documents/Testfile.txt)an extra window opens and shows me the content of the file. In case I enter a wrong url (e.g. http://<portal_server>:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/Public%20Documents/wrong_file_name.txt)I see the standard "404 The requested resource is not available" error page. But I want to see my customized error page.
How to
I think I have to modify the web.xml of the KM the same way I did for the portal. But I do not know where to find the KM web.xml? Please could someone advise me where to look?
I appreciate all kinds of help!
Martin

Closed Captions - Appalling support - Section 508 for video non-existent.

Adobe premiere pro has horrific support for closed captions. I find it quite appalling that the page on captions is severely outdated and there is no commitment to nor desire to support, provide, or even assist with captioning beyond the poorly designed and non-intuitive caption editor which takes an Adobe Scientist to use. Adobe should be ashamed. There is no delay adding other functions to Premiere and the other CC products, but no urgency or desire to remotely address accessibility.
Are there any real plans other than the same unfulfilled promise over the past 12 months to provide real functionality, or we will continue to have to use third party applications for this?
Page reference: Adobe Premiere Pro Help | Closed Captioning

Hi WarithNiallah,
First of all, Premiere Pro's closed captioning feature is not intended to be a replacement for closed captioning applications. The feature's intent is to only be able to edit them. I'm sorry that your expectation is that you could do all of your closed captioning work within Premiere Pro. If that is what you really want engineering to focus on, let them know here: http://adobe.ly/feature_request
I don't see any errors on the actual documentation per se, but if you do see any please let us know and we'll fix that.
Thanks,
Kevin

After the OS update I get asked a password for a non existing ICloud account.

Since installing 7.0 i have been asked for the password for an icoud account i dont remember the password of.
when i try the forgot password site i ask to be sent an email to that i have.
BUT I never get that email and I cant reset the ipad.
This is criminal, I have an ipad i bought and i cant use it because i forgot a password.
Can someone help please.
Thanks.

IOS 7
Owner's Apple ID and Password is needed for the following:
1. Turn off Find My iPhone
2. Erase device
3. Reactivate device

Acrobat 8 Pro Installation asks for a non-existent file

I just did a clean install of Windows 7 Ultimate 64-bit on my Alienware laptop, FINALLY replacing the beta version. When I try to run the installation of Acrobat Pro 8 it gets most of the way through then stops, putting up a dialog instructing me to install my Vista DVD and point to AdobePDF.dll which is to be found in C:\Program Files (x86)\Adobe\Acrobat 8.0\Xtras\AdobePDF\i386. This, of course, is absurd, as there is not such folder on any installation disk ... but I happen to have a Vista install disk, so I looked anyway, searching all over the disk with no luck. Then I looked on my Windows 7 disk. No success in finding the errant file there, either. They I checked that folder on my desktop computer, which has the identical operating system. I found an AdobePDF64.dll file and offered it to the installer, but it didn't like it. I even checked an old WinXP 32-bit computer I had laying around, but no such file exists there. I'm stuck. I cancelled out of the dialog demanding the .dll file and the installation proceeded to conclusion. The resulting Acrobat installation reads PDFs fine, but doesn't write them. Any clues?
Thanks,
Lanny T.

Thanks for chiming in, Bill, but it seems like you missed my comment about checking my other computer, same OS, same Acrobat 8, and it installed fine into 64-bits. It didn't ask for any files from other disks, and I've been using it on that system for almost two years in that environment. I am puzzled, though, as to why all files needed for installation of any program would not be included on the installation disk.
Lanny T.

Illy CS6: 'unembed' option for images non existent?

Hello all,
Just wanted to ask a quick question about this much-hyped 'unembed' image option in Illy CS6.
I'm working on a PDF with like 40 or so JPEGs scattered about. Naturally I never embed images when I'm working on stuff like this in Illy - reduce file size, no need for it, makes everything way less clunky. However, I had to change comps so rather than cart around a folder full of linked pics I thought I'd just do a mass embed using the Links window. So far so good.
However, now I'm trying to save it as an (not-intended-to-be-edited) PDF. Before I was getting super clean outputs at like 5meg or so (well, actually they came out at 25meg but I ran them through Acrobat to reduce the file size... anyway). After embedding, they came out at like 60meg or whatever. OK, no big deal, classic problems with saving PDFs.
However, I _can't_ find a way to unembed the images, at all. I'd consider myself a really advanced user of Illy, but it's totally eluding me! I've watched videos of people who are doing the exact same thing - either getting to it through Links or the top tool bar - however in my case, I have a ghosted out 'embed', and that's it. Can't find 'unembed' anywhere... I'm just wondering, is this a feature that didn't make it to CS6 (rather just CC), and it was some sort of typo that means the PR release went out as it being for CS6?
NB: FYI, I of course just made like 6 images of each of the pages, then stuck them together to make a PDF which is like 3meg... all is fine, but I think from a purist's point of view one is better to save 'real' PDFs rather than images...
thanks for any help!
Marko

You need to have the Creative Cloud version of Illustrator CS6
In case the file is saved with PDF compatibility option turned on, you could open it in Photoshop and extract the images there

JDeveloper capabilities for Reverse Engineering existing instances and data

We are experiencing difficulty obtaining the indexes, synonyms, and triggers via reverse-engineering capture of existing 10g DB's. Does JDeveloper have the capabilities for Reverse Engineering all objects from existing DB's ?
Will 10g JDeveloper handle reverse-engineering large 300 table schemas rich with large quantity of indexes, synonyms, & triggers?
And last, how can a listing of the Data Dictionary be extracted /exported in CSV or excel format for review distribution? Via JDeveloper? We have a large distributed development, test, quality, and integration team which prefers to review various elements of schema updates and changes in excel.
Thanx.

Vicki-
Thanks for the additional info. I was thinking you were most concerned with reverse-engineering existing schemas. I did not realize you were designing new schemas.
When you mention ERDs, are you interested in logical ERDs (as compared to physical tables and foreign keys)? If you are interested in doing pure logical ERD modelling, then Designer is the way to go. It has been years since I worked with Designer, but it has ooodles of capabilities to forward and reverse engineer between databases, physical models, and logical models of schemas. It sounds like you might be using Designer today and are hitting some snags. Is this the case? If so, I suggest you see if Oracle Support or the Designer forum can help you get past the specific Designer issues. The forum for Oracle Designer is here: Designer
Sue mention that JDeveloper does support database modelling. Here is a how-to for JDeveloper 11g that shows how it works:
http://www.oracle.com/technology/obe/obe11jdev/11/db_dev/obe_%20databasedevmt.htm
The how-to is pretty complete showing you forward and reverse engineering capabilities.
A few more minor notes:
1.The JDeveloper schema modelling features work on a physical (not logical) level. In other words, they work on tables not entities.
2.The SQL Developer report features certainly work on "DATA". But, the "DATA" they work on can certainly be the data dictionary data. In other words, I can write a report in SQL Developer that queries all of the column names, column data types for a subset of tables. Then I can export that "DATA" into excel and use it for whatever your downstream needs are. The potential capabilities are practically unlimited.
Cheers,
-dave

How do I restore my iPhone 4s when it asks to put in a password for a non existent iCloud account?

how do I restore my iPhone 4s when it is asking me to sign into a non existant iCloud account?

Do you have a second hand device and the Activation Lock has not been removed by the previous owner?
Check the status of the Activation Lock on your computer by using this link: icloud.com/activationlock
If the Activation Lock is still active and this is not one of your Apple ID's, if you are using more than one, contact the previous owner to have the Activation Lock removed:
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. Learn how to remove a device from a previous owner's account.
copied from Find My iPhone Activation Lock

Table creation Error "Ref Count for this object is higher than 0"

Hi All
I have a problem in creation of table using SDK on a button event. I have a procedure to create tables and fields. If I call this procedure on a menu Event than it works fine but If I call this procedure on a button event than It gives error "Ref count for this object is higher than 0" . I know this error occur When an object does not release after creating a table. but this error occur at when first table is created. My code it given below. plz see and give me your valuable suggestions.
Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
 Try
 oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
 oUserTablesMD.TableName = "AM_OBIN"
 oUserTablesMD.TableDescription = "PutAway Table"
 oUserTablesMD.TableType = BoUTBTableType.bott_Document
 lRetCode = oUserTablesMD.Add
 '// check for errors in the process
 If lRetCode <> 0 Then
 B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
 MsgBox(sErrMsg)
 Else
 B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
 End If
 System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
 oUserTablesMD = Nothing
 GC.Collect()
 oUserTablesMD = B1Connections.diCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
 oUserTablesMD.TableName = "AM_BIN1"
 oUserTablesMD.TableDescription = "PutAway Upper Grid"
 oUserTablesMD.TableType = BoUTBTableType.bott_DocumentLines
 lRetCode = oUserTablesMD.Add
 '// check for errors in the process
 If lRetCode <> 0 Then
 If lRetCode = -1 Then
 Else
 B1Connections.diCompany.GetLastError(lRetCode, sErrMsg)
 MsgBox(sErrMsg)
 End If
 Else
 B1Connections.theAppl.StatusBar.SetText("Table: " & oUserTablesMD.TableName & " was added successfully", BoMessageTime.bmt_Short, BoStatusBarMessageType.smt_Success)
 End If
 System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
 oUserTablesMD = Nothing
 GC.Collect()
 Catch ex As Exception
 MsgBox(ex.Message)
 End Try
Thanks
Regards
Gorge

Hi Gorge,
The "Ref count error..." usually occurs in case of Meta Data objects not being properly cleared. And yes, you have got the error in the right place, generally while creating tables / fields / UDOs. For this, you just need to clear the Meta Data object (At times even DI objects like Record Set) once they are used.
Eg: Release these objects in the below way in a Finally Block.
System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
Hope this helps.
Regards,
Satish

Message retry count for the message has been exhausted

Hi,
I am using 'Custom Document Over Internet' with HTTPS as transport protocol. I have set the acknowledgement mode to Sync in order to receive the synchronous response. B2B is able to post the HTTP request successfully and in turn it receives a synchronous response and a MDN message. At the initial stage, after posting the request it shows the state as 'WaitForAck' for request message and for response and MDN messages, the state is completed.
After some time when we check the state of request it is changed to 'Error' with the error message as 'Message retry count for the message has been exhausted'. We have not set the retry count and retry interval and so after retrying for 3 times with an interval of 120 minutes it is showing error state as it is not able to correlate the incoming response to the corresspoding request. We have tried the option of setting the Message id of the request in 'replyToMsgID' parameter of response header and tested the flow. But still I am facing te same issue. Please help me to resolve this issue.

Hi Anuj,
The property mentioned by NandaGopal has already been added in tip.properties file. I sent the B2B logs in debug mode and tip.properties file to your mail id. Please have a look into that. The result of opatch lsinventory command is
Result:
Installed Patch List:
=====================
1) Patch 9234704 applied on Fri Jan 15 16:41:12 GMT 2010
[ Bug fixes: 8870866 9143036 ]
[ This patch overlays patches " 8703410 " ]
[ This patch needs patches " 8703410 " as prerequisites ]
2) Patch 8703410 applied on Thu Jan 07 17:56:08 GMT 2010
Unique Patch ID: 11901808
[ Bug fixes: 7652646 7497854 7664370 8708445 7661101 7007789 6352814 6802446 7665607 7641078 6496457 6013963 8330151 7305413 8619657 7460584 7529893 7458954 7020996 8393885 8210401 6329207 6740403 7126458 6511970 8783577 7379065 7230993 8704965 6774631 7198642 8309511 8392729 7661769 7605518 7479148 6733262 8349002 6736026 7322333 7242500 7239355 8746561 8344645 8451004 7645440 6747966 6369424 6737334 8339176 6774134 7046561 6412124 7210461 7506319 8630406 8235175 7258882 7184318 6453359 7456866 7673646 6043277 7457597 6769895 7193710 8239170 7668247 8404955 8612841 7261965 7132740 7485790 6518386 7305363 6852370 6433256 7673431 6764239 8360048 7501748 7379153 8281019 7498031 8216457 7046574 6875312 6754906 6656289 6417367 7658271 7556011 7000190 6979467 8594506 8691820 6852308 8475848 8518443 7600385 7211208 6732051 8524862 7461051 8263026 7609467 7379161 7672714 6353293 7157229 7594997 7211287 7034069 7563311 6822375 6640935 7359202 6769261 6919593 8601869 6029507 6974391 7139013 7518641 8605719 6817264 7501903 7496014 7576785 8666761 7130151 7322581 5523563 7680097 8508905 7241737 7660780 8480395 7660781 7191994 6924921 7672723 8432093 6800745 8703404 8540335 8507242 8608121 8217566 7481317 6639030 6200414 7529795 7354853 8475867 7376270 7303860 7016005 7678901 7368610 8992520 6881977 6016128 7033061 6397084 7672730 8703410 7709562 6449656 7045589 8508054 6491068 7378745 7643811 7435853 7615836 8707416 6447557 7379042 6940476 7670634 6950383 6764273 6962327 7478322 8546454 7157324 8871403 8862082 7184219 7672744 7164618 7672745 7230184 7576730 7590301 8746541 7261863 8327427 6769430 8295683 7526186 8298731 6414280 6139955 6646997 7692853 8233048 6794296 7457066 8552373 8225241 7706387 7204022 ]
3) Patch 4601861 applied on Fri Nov 14 04:24:08 GMT 2008
[ Bug fixes: 4601861 ]

Need to count number of non-empty (not null) occurrences for an element in XML

Hello,
 I have some XML data stored in a CLOB, there is a fragment shown below:
<ADDR>
<AutoNameOfOrganisation>2nd Image</AutoNameOfOrganisation>
<AutoLine1>105 Risbygate Street</AutoLine1>
<AutoLine2> </AutoLine2>
<AutoLine3> </AutoLine3>
<AutoU40.16>BURY ST. EDMUNDS</AutoU40.16>
<AutoStateOrCounty>Suffolk</AutoStateOrCounty>
<AutoU40.13>IP33 3AA</AutoU40.13>
<AutoU40.14>UNITED KINGDOM</AutoU40.14>
</ADDR>
<ADDR>
<AutoNameOfOrganisation></AutoNameOfOrganisation>
<AutoLine1>2 2nd Avenue</AutoLine1>
<AutoLine2> </AutoLine2>
<AutoLine3> </AutoLine3>
<AutoU40.16>HULL</AutoU40.16>
<AutoStateOrCounty>East Riding of Yorkshire</AutoStateOrCounty>
<AutoU40.13>HU6 9NT</AutoU40.13>
<AutoU40.14>UNITED KINGDOM</AutoU40.14>
</ADDR>
 What I would like to do is to be able to look at the whole of the xml and derive a count for a particular element where there is data .
 In the above case <AutoNameOfOrganisation> is not null in the first record and null in the second whilst <AutoLine3> is null in both records, so I'd like the counts to be 1 for <AutoNameOfOrganisation> and 0 for <AutoLine3>.
 The reason for this is so that I can avoid showing a column in a report if there is no data for that particular column in the results.
 I'm using Oracle 11G.
Thanks for any help,
Chris

Here's one way :
select count(AutoNameOfOrganisation)
 , count(AutoLine3)
from my_table t
 , xmltable(
 '/root/ADDR'
 passing xmlparse(document my_clob)
 columns AutoNameOfOrganisation varchar2(30) path 'normalize-space(AutoNameOfOrganisation)'
 , AutoLine3 varchar2(30) path 'normalize-space(AutoLine3)'
 ) x ;
In your sample fragment there's no root element so I've added one to test the query (though it's also possible to work with real XML fragments).
You may also omit normalize-space() calls if empty nodes are really empty. In your sample, there's a whitespace so I've added the function to strip it off.

Display count for each category in sharePoint 2013 blog site

Hi,
I have added category list in the left side as web part in SharePoint 2013 blog site.
Here i want to show the count for each category. And on clicking on the category, it should show the blog posts related to that category.
Is there any way to do this.
Please help.
Thank you.

Hi Aditi,
To show item counts on a list, you might need to query the list by title in the navigation menu and retrieve item count in the list, then use CSS to add the number to navigation menu. You need to use Client Object Model and JQuery.
Here are similar issues:
http://sharepoint.stackexchange.com/questions/5477/getting-a-count-of-list-items-in-a-list-via-ecmascript
http://sharepoint.stackexchange.com/questions/18050/how-do-i-get-the-number-of-items-in-a-list
Regards,
Rebecca Tu
TechNet Community Support

How to solve the error "Ref Count for this object is greater then 0"

Hi,
I'm trying to add UDF at runtime to an already created UDT which is of No Object Type.
my code is as follows:
dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
oUserFieldsMD = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
oUserFieldsMD.TableName = "@TI_ADDCODES"
oUserFieldsMD.Name = codetoinsert
oUserFieldsMD.Description = desctoinsert
'Add the field to the table
 lRetCode = oUserFieldsMD.Add
 If lRetCode <> 0 Then
 ocompany.GetLastError(lErrCode, sErrMsg)
 MsgBox(sErrMsg)
 Else
 MsgBox("Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table")
 End If
I got error msg as "Ref Count for this object is greater then 0" and error code is -1120
how to rectify it?
Thanks in advance!!!

Hi,
Have you searched the forum? You may check this first: error -1120 when adding UserTableMD.
Thanks,
Gordon

[CCM 5.0/perfmon] Adding a counter for a none-existing instance

Similar Messages

Maybe you are looking for