CCM 8.6.1- Installation Failed. Restart install to recover from failure
Hi All,
I am installing CCM 8.6.1 on an MCS7835I3 platform. The platform came with CCM 8.6.1 preloaded on the harddrive. During the installation linux detected some compenents like NIC, Raid, and USB.
then after checking some components i face below error
"The installtion has failed and must be restarted to recover from the faliure.
You may dump diagnostic information at this time to a USB storage key. Would you like to dump diagnostic information"
I am try to figure out what is causing this message.
Pls help me!!
Hi
It seems to me that your server did not begin the CUCM installation. If you already have pre-loaded CUCM media in the server hard disk then you should first check the boot sequence on the server. Make sure that the first option is the hard disk.
Once confirmed, restart the server.
If you still face the issue, then i suggest that you install CUCM from CD.
Below is the installation document. Do check the server compatibility and hardware requirements.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html
Regards ,
- Jayant
Similar Messages
-
Illustrator CS6 says "installation failed" when installing.
Illustrator CS6 says "installation failed" when installing. No explanation is given. I don't have any previous versions of AI installed or any trials. Help? I really need to use this product today!
We can't know. You need to provide system information and possibly the install logs:
Troubleshoot with install logs
Mylenium -
Installer fails to install EM on Window XP non English
Hello,
I'm new to Oracle and try to install Oracle 10.1.0g on my Windows XP Professional Czech machine.
Universal installer fails to install Enterprise manager. So I later manually invoke emca.bat -r. However this fails with error - Malformed Encoding.
Could somebody please help me? Many thanks.
Log:
You have specified the following settings
Database ORACLE_HOME ................ C:\usr\oracle\product\10.1.0\Db_1
Enterprise Manager ORACLE_HOME ................ C:\usr\oracle\product\10.1.0\Db_
1
Database host name ................ Informatika-7.nempodlesi.cz
Listener port number ................ 1521
Database SID ................ orcl
Service name ................ orcl
Email address for notification ............... d@x
Email gateway for notification ............... d
Do you wish to continue? [yes/no]: yes
Nov 29, 2004 10:04:32 AM oracle.sysman.emcp.EMConfig updateReposVars
INFO: Updating file C:\usr\oracle\product\10.1.0\Db_1\sysman\emdrep\config\repos
itory.variables ...
Nov 29, 2004 10:04:32 AM oracle.sysman.emcp.util.PortQuery findUsedPorts
INFO: Searching services file for used port
Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig getProperties
WARNING: Error reading file C:\usr\oracle\product\10.1.0\Db_1\sysman\config\emd.
properties
Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig addPortEntries
INFO: Updating file C:\usr\oracle\product\10.1.0\Db_1\install\portlist.ini ...
Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig updateEmdProps
INFO: Updating file C:\usr\oracle\product\10.1.0\Db_1\sysman\config\emd.properti
es ...
Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig updateTargets
SEVERE: Error saving targets list to C:\usr\oracle\product\10.1.0\Db_1\sysman\em
d\targets.xml :: Malformed \uxxxx encoding.
oracle.sysman.emSDK.conf.TargetAdditionException: Error saving targets list to C
:\usr\oracle\product\10.1.0\Db_1\sysman\emd\targets.xml :: Malformed \uxxxx enco
ding.
at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller
.java:1103)
at oracle.sysman.emSDK.conf.TargetInstaller.addTarget(TargetInstaller.ja
va:989)
at oracle.sysman.emSDK.conf.TargetInstaller.addTarget(TargetInstaller.ja
va:943)
at oracle.sysman.emcp.EMConfig.updateTargets(EMConfig.java:2650)
at oracle.sysman.emcp.EMConfig.updateConfigFiles(EMConfig.java:1355)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:407)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.jav
a:678)
at oracle.sysman.emcp.EMConfigAssistant.performSetup(EMConfigAssistant.j
ava:627)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.jav
a:332)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:172)
Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig updateConfigFiles
SEVERE: Error updating targets.xml. Update could not be completed successfully
Nov 29, 2004 10:04:33 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error updating the necessary configuration files.
Could not complete the configuration. Refer to the log file for detailsHello,
you are facing bug 3610052, on Windows platforms you must not install EM into a directory starting with 'u'. This is interpreted as unicode encode and throws 'Malformed encoding' error message. -
The unattended installation failed while installing SQL Server 2008 R2 ????
Hi gurus,
I got an error while installing SQL Server 2008 R2 in Windows 2008 R2 standard 64 bit operating system.
LOG file*
Customized installation of SQL Server 2008R2 for SAP *
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlWriter_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_common_core_Cpu64_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SqlBrowser_Cpu32_1.log
MSI error description:
MSI status: Failed: see details below
MSI error code: 0x1639
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\sql_tools_Cpu64_1.log
MSI error description:
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120116_221104\SystemConfigurationCheck_Report.htm
1/16/2012 10:13:34 PM
Message Box "Installation failed"
The unattended installation failed.
Installation Step: The unattended installation failed.
Return Code: -2068052377
Log File: C:\Windows\SQL4SAP.log
Check the log file above.
See SAP note 1144459 for known issues.
Result: vbOK
Registry settings (2/2):
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}
WRITE(REG_DWORD): 4
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2b9034f3-b661-4d36-a5ef-60ab5a711ace}
WRITE(REG_DWORD): 4
1/16/2012 10:37:32 PM
Quit script with return code 1
Please help me out with this issue.
REGARDS,
RajHello Raj,
MS SQL DB installation specific steps for SAP system is clearly documented in SAP Installation guide. Please download from SMP, read it carefully and install as mentioned in the guide.
Hope it helps.
Thanks,
Siva Kumar -
Every PATCH installation fails after installing Windows Updates
Hello,
I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
Here is the test case:
1. install a fresh copy of Windows on a test machine
2. install all available Windows Updates (so the system is up to date)
3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
4. install the MSI from the online location using a command line like this:
msiexec /i http://server/share/package.msi
5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
6. install the v1.0.1 patch
RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
NOTES:
1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
2. the issue is not replicated on a fresh installation of Windows without Updates applied
Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
Thx,
DanielHello,
I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
Here is the test case:
1. install a fresh copy of Windows on a test machine
2. install all available Windows Updates (so the system is up to date)
3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
4. install the MSI from the online location using a command line like this:
msiexec /i http://server/share/package.msi
5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
6. install the v1.0.1 patch
RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
NOTES:
1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
2. the issue is not replicated on a fresh installation of Windows without Updates applied
Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
Thx,
Daniel -
LR 5 installation failed when installing from cloud
Error message:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80} -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1Hi dsharpechevychase,
Please refer the kb: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html .
Regards,
Romit Sinha -
Exchange Server 2013: Installation failed while installing Mailbox role.
Hi,
Mailbox role installation failed. I tried to remove and reinstall so many times but it still fails. (but the uninstall is complete)
Below is log from the lastest installation. Could you please help to veify the problem.
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog -Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox.".
Error:
The following error was generated when "$error.Clear();
if ($RoleIsDatacenter -ne $true)
if (Test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
$sysMbx = $null;
$name = "SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c}";
$dispName = "Microsoft Exchange";
Write-ExchangeSetupLog -Info ("Retrieving mailboxes with Name=$name.");
$mbxs = @(Get-Mailbox -Arbitration -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1 );
if ($mbxs.Length -eq 0)
Write-ExchangeSetupLog
-Info ("Retrieving mailbox databases on Server=$RoleFqdnOrName.");
$dbs = @(Get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
if ($dbs.Length -ne 0)
Write-ExchangeSetupLog -Info ("Retrieving users with Name=$name.");
$arbUsers = @(Get-User -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
if ($arbUsers.Length -ne 0)
Write-ExchangeSetupLog -Info ("Enabling mailbox $name.");
$sysMbx = Enable-Mailbox -Arbitration -Identity $arbUsers[0] -DisplayName $dispName -database $dbs[0].Identity;
else
if ($mbxs[0].DisplayName -ne $dispName )
Write-ExchangeSetupLog -Info ("Setting DisplayName=$dispName.");
Set-Mailbox -Arbitration -Identity $mbxs[0] -DisplayName $dispName -Force;
$sysMbx = $mbxs[0];
# Set the Organization Capabilities needed for this mailbox
if ($sysMbx -ne $null)
# We need 1 GB for uploading large OAB files to the organization mailbox
Write-ExchangeSetupLog -Info ("Setting mailbox properties.");
set-mailbox -Arbitration -identity $sysMbx -UMGrammar:$true -OABGen:$true -GMGen:$true -ClientExtensions:$true -MailRouting:$true -MaxSendSize 1GB -Force;
else
Write-ExchangeSetupLog -Info ("Cannot find arbitration mailbox with name=$name.");
else
Write-ExchangeSetupLog -Info "Skipping creating E15 System Mailbox because of insufficient permission."
" was run: "Database is mandatory on UserMailbox. Property Name: Database".Hi,
See if deleting the account SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c} in ADUC (you should find it in the Users Container) and then rerun
setup.exe /preparead helps you solve your problem.
Martina Miskovic -
Installation failed while Installing 10g SOA_Suite
Hi,
I am installing 10g soa_suite, but its failed at middle with below mentioned error.
"Unable to locate a valid OC4J URI. The server is probably down."
any suggestion pls.
Thanks,
Santosh M ESolution: when this error accures do not stop the installation and Start the OC4j manually and resume the installation.
-
Turned on my computer one night its says finder quit unexpectedly so I ask around and general consensus is to fix it back up files and do a system restore which is no problem right? Wrong...I went in and tried just installing the os onto the HD, when that didn't work I went through the disk utility and tried cleaningand repairing the HD and retrying installation. When that failed I double checked backup then while booted from the disk I word the HDand attempted installation once more. Once again to no avail, so here I'm my files on an external my HD is empty and my OS won't install. Any assistance is very much appreciated.
TarahCurrie Sep 10, 2014 3:48 PM
Restore From Time Machine Backup
Reinstall OS X
Get Help Online
Disk Utility
MacBook Pro, Mac OS X (10.5.8)
You are running 10.5.8
Did you try booting off your Install disk holding the c key down. From here you can get to the drop down menu just a few clicks in (you are not going to install) and run the Disk Utility>Repair Disk. See if it will let you do this. -
Grub from arch installer fails to install
Using the pre-release core (i686) iso 2011.03.23 because the standard iso doesn't have the drivers to support my wireless device (though neither seems to have a driver for the wired interface, interestingly)
When at the 'Install Bootloader' step, it attempts to build the GRUB device map, then the arch installer quits, printing this at the bottom along with a console prompt:
ERROR: device_is_raid needs a blockdevice as $1 ( given)
Attempted to then run 'grub-install' from said console as follows:
[root@archiso ~]# grub-install /dev/sda --root-directory=/mnt
Probing devices to guess BIOS drives. This may take a long time.
The file /mnt/boot/grub/stage1 not read correctly/
[root@archiso ~]#
I found I had to pass the root-directory argument, as otherwise it couldn't find the stage1 file.
This hard disk is not using raid in any way, and for reference has a partition layout as follows
/dev/sda1 ntfs as PQSERVICE
/dev/sda2 ntfs as SYSTEM RESERVED
/dev/sda3 ntfs as Acer
/dev/sda4 extended partition containing:
/dev/sda5 ext3 as /
/dev/sda6 swap
The first three were already present on the disk with Windows 7, which incidentally continues to boot without issue. The only modification made was to shrink the Acer (aka C:\) partiton with GParted to make room for Arch.
Would rather use GRUB than other bootloaders unless unavoidable.
Thanks for any help offered.Gremnon wrote:Out of habit, I always use the Beginners Guide, and always use GParted to prepare the partitions in advance. Bad blood between me and Parted Magic writes it out of the book entirely.
Will try again with a boot partition included, but I don't see why it would make any difference.
Any particular reason for ext3 over ext2 for /boot?
I don't see why it would make a difference either, but my install failed until I did it. Ext3 is more robust than Ext2, so if your system crashes there's a better chance of it not being hosed. I don't think it's a big deal either way, but I feel safer with Ext3. -
Adobe Installer fails to install CS4 11.0.2 update
Hi,
I have a problem with updating photoshop CS4 to 11.0.2 under Windows 7. The installer seems to do the installation but the version number on the splash screen stays at 11.0.1 AND the Adobe updater keeps telling me that I need to install 11.0.2.
I have tried downloading the update directly and installing it with no success. I have tried to run the updater exe as administrator and all I get is a report that the upgrade has already been installed, but the version number reported by photoshop is still 11.0.1.
Also - I have tried running the update from within photoshop with administrator rights and it still does not work. There is no instance of bridge running in background (I have checked the processes list).
I have searched the threads here but there does not seem to be an answer.
Any suggestions anyone?Okay, so my next question is: Do you have write access to the Photoshop installation folder tree(s)?
Even though you may be an administrator on your computer, Windows 7 does not normally grant you administrative privileges. Through the feature called UAC (User Access Control) your privileges can be temporarily elevated. It is possible that this process was not invoked properly during the initial Photoshop installation, and thus the installation area and/or registry protections have not been updated so that the latest Photoshop installer can change things successfully.
You can try temporarily lowering the UAC level and see if the updater can complete its task.
1. Click Start, and type UAC into the search box.
2. When Change user account control settings comes up, click it.
3. Make note of the current setting, then lower the setting to "Never notify". At the "Never notify" setting you are granted administrator privileges full time.
4. This normally requires a reboot. Do so.
5. Try the Photoshop 11.0.2 update again.
6. Return UAC settings to default (recommended).
-Noel -
Receiving the error Installation Failed when installing After Effects
I tried several times to download AE both through a trial of Creative Cloud and the "Download Now" button under the product. One time the download got to 99% and then abruptly quit. I'm on a Mac using OS 10.6. I have used PS, Illustrator and Indesign rather heavily for several years but have never tried AE. I wanted to try it and also the Creative Cloud at the same time.
It doesn't look very promising to me. Hope you get yours working.I have branched this out to a new discussion. I would recommend you start with downloading and attempting the installation of the trial of After Effects. You can locate the trial at http://www.adobe.com/cfusion/tdrc/index.cfm?product=after_effects. If you are able to successfully install the software then please choose the option to License this Software after it is installed as a trial. You will then want to enter your Adobe ID tied to your Creative Cloud subscription.
If you continue to experience difficulties then you will want to utilize the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ to automatically review your installation logs. Alternatly, or if you do not receive an actionable result, you may want to review the installation logs manually to determine the source of your difficulties. You can locate steps on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html. -
Installation Fails ( SILENT Install)
I am using following syntax to install Oracle 10g using response file and silent option.
/home/oracle/database/runInstaller -silent -responseFile=enterprise.rsp
This fails with:
Unexpected Signal : 11 occurred at PC=0xF7D807CE
Function=(null)
Library=/tmp/OraInstall2011-11-15_06-13-22AM/jre/1.4.2/lib/i386/client/libjvm.so
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Native Method)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(OiipgBootstrap.java:1206)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(OiipgBootstrap.java:900)
at oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(OiipgBootstrap.java:408)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(OiicSessionInterfaceManager.java:400)
at oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(OiicSilentInterfaceManager.java:679)
at oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(OiicInvSetupWCCE.java:217)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.
0007000 08:03 176980436 /tmp/OraInstall2011-11-15_06-17-32AM/jre/1.4.2/lib/i386/native_threads/libhpi.so
ffc2a000-ffc3f000 rwxp 7ffffffe9000 00:00 0 [stack]
Heap at VM Abort:
Heap
def new generation total 576K, used 271K [0xe65f0000, 0xe6690000, 0xe7170000)
eden space 512K, 51% used [0xe65f0000, 0xe6632828, 0xe6670000)
from space 64K, 8% used [0xe6680000, 0xe66816b0, 0xe6690000)
to space 64K, 0% used [0xe6670000, 0xe6670000, 0xe6680000)
tenured generation total 1408K, used 1074K [0xe7170000, 0xe72d0000, 0xefbf0000)
the space 1408K, 76% used [0xe7170000, 0xe727ca18, 0xe727cc00, 0xe72d0000)
compacting perm gen total 4864K, used 4645K [0xefbf0000, 0xf00b0000, 0xf3bf0000)
the space 4864K, 95% used [0xefbf0000, 0xf0079468, 0xf0079600, 0xf00b0000)
Local Time = Tue Nov 15 06:17:34 2011
Elapsed Time = 0
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002EF
Heap at VM Abort:
Heap
def new generation total 576K, used 271K [0xe66e0000, 0xe6780000, 0xe7260000)
eden space 512K, 51% used [0xe66e0000, 0xe6722828, 0xe6760000)
from space 64K, 8% used [0xe6770000, 0xe67716b0, 0xe6780000)
to space 64K, 0% used [0xe6760000, 0xe6760000, 0xe6770000)
tenured generation total 1408K, used 1074K [0xe7260000, 0xe73c0000, 0xefce0000)
the space 1408K, 76% used [0xe7260000, 0xe736ca18, 0xe736cc00, 0xe73c0000)
compacting perm gen total 4864K, used 4645K [0xefce0000, 0xf01a0000, 0xf3ce0000)
the space 4864K, 95% used [0xefce0000, 0xf0169458, 0xf0169600, 0xf01a0000)
Local Time = Tue Nov 15 06:13:23 2011
Elapsed Time = 0
# HotSpot Virtual Machine Error : 11
# Error ID : 4F530E43505002EF
# Please report this error at
is the above a space issue??? Not clear on the error messages..
thanks
OS is: CentOS release 5.7
thanksPl identify exact version of "10g" being installed. CentOS is not a supported distro, so things may or may not work as expected. Search this forum for others who have tried to install on CentOS.
http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/pre_install.htm#sthref111
HTH
Srini -
Installer fails to install DB Config Assistant
This is a beginner question.
At the very end of the installation of Oracle 8.1.5 on Suse 6.2
the installation of ORACLE DATABASE CONFIGURATION ASSISTANT fails
with the message:
"Unable to initialize threads. cannot find JAVA/LANG/THREAD.
Could not create Java VM."
What did I miss/not do correct - how can I solve this problem ??
K
null: the installation of ORACLE DATABASE CONFIGURATION ASSISTANT
fails
: with the message:
: "Unable to initialize threads. cannot find JAVA/LANG/THREAD.
: Could not create Java VM."
I had the same problem with 8i on RedHat 6.0.
: What did I miss/not do correct - how can I solve this problem
The solution I found was a bit of a hack -- I hope someone else
can offer a better answer.
The dbassist (and probably others) shell script plays around
with the CLASSPATH environment variable and the problem is that
it sets it to the lib directory (/usr/local/jdk/lib on my box at
home) rather than the zip file (/usr/local/jdk/lib/classes.zip).
I ended up editing the shell script to force it to use the zip
file which is not terribly elegant but it does work.
HTH,
--> Steve
null -
Installer fails to install .pkg files
Just purchased Adobe Lightroom, and the .pkg file will not install. I get a console log message like so: "2007-08-09 16:20:58.530 Installer[416] Unable to load nib file: PagedInstaller, exiting"
I tried a safe boot, llogging in as root, but this did no good...
It installs just fine on my laptop, so it's not the disk...
Any ideas short of a OSX reinstall?
Message was edited by: ChucklaHello and Welcome to Apple Discussions!
This is a shot in the dark but it can't hurt anything. Locate this file:
com.apple.installer.plist It's here: /Home/Library/Preferences
Open the Preferences folder, locate that file and drag it to the Trash. Reboot.
Try the Adobe LIghtroom installer.
Also, if you haven't already tried it, run Disk Utility and Repair Disk Permissions. That can fix a myriad of weird problems.
Carolyn
Maybe you are looking for
-
Macbook No Longer Recognizes External Hard Drive
Recently I bought an external hard drive (Toshiba Automatic Backup Portable Hard Drive) to backup my Macbook (Mac OS X 10.6.8). I found that in order to have my Mac recognize the hard drive, I needed to partition it by formating it to MS-DOS (FAT). I
-
Powerbook monitor died...how do i recover files?
I have a powerbook titanium and the monitor has died. It would cost like 400$ to replace the monitor so i bought a new macbook. how would i go about getting my data in the harddrive out? I was thinking two solutions 1) remove hardrdive put it in a id
-
Overwrite material BOM component
Hi, I am trying to over-write the component of a material BOM with another component in the same position. I am using FM CSAP_MAT_BOM_MAINTAIN for this. I am passing values to the the below parameters. MATERIAL H.1013.2476
-
Help! I can preview the presentation in Finder however, when I click on "Open with Keynote" it says, "presentation can't be open". How can i get it to open?
-
Creating a view to cast the field type
Hi All, I had a table test with 2 fields key and time. time is of type timestamp. i want to create a view on the table but cast the cast the time field from timestamp to datetime or date which can accomodiate the date and time. I dont need the milli