CCM 9.1 dial plan with 11 digits Pros and Con

all I came into a new setup where they have the following:
DN: 11 digits (1XXXXXXXXXX) which matches the DID's
all LDAP users has +1 dialing in telephone field
I guest this was mainly used for + dialing
used across 5 locations
Now they want to add site codes (CCC+last4) 7 digits for internal dialing
-- plan on adding 20 more sites.
this would not be so bad if the site had DID's in a con't range. I am hoping this does not turn into a nightmare
plan:
leave the DN at 11 digits
change the display to show CCC+last4
create translation for the site code (CCC)
CCC.XXXX -- predot, prefix 1678507 = 16785075555
has anyone done this type of dial plan before? Pros and Con

Hello!
Please, explain a little bit more "this would not be so bad if the site had DID's in a con't range"..
Can u put some examples may be?
Regards,
Kirill

Similar Messages

Panasonic AG-HPX500 workflow with FC - pros and cons?

We are now shooting on Betacam SP, capturing to DV using a DSR-45P DVCAM deck.
We edit in FCP 5.
Now we are about to first upgrade our computers to MacBook Pro and Mac Pro and FCS 6.
Next step is a new camcorder.
We have been recommended to take a look at Panasonic AG-HPX500, which uses the P2 card.
Have anyone of you excellent forum members started working with this camcorder?
I understand that FCS 6 does have native support for the P2 card and if you have a MacBook Pro, you can plug the P2 card into the computer and copy the footage you want to use to a hard drive (or even edit directly on the P2 card).
I'd be very glad if you'd share your opinions.
We have this idea to start shooting and editing in HD and then downconvert to SD when creating the MPEG-2 for a SD DVD as output format. This would hopefully give the best quality to our MPEG-2 encoder.

I've been using the P2 system for about 7 months and have to say it's great!
I'm not sure what you mean about it not having native support in FCP. FCP 6 has all you need to get your material in and work with it using the Log and Transfer system within the app.
I use a P2 reader to get the material in, and yes you can use a laptop but only the Powerbok type, the newer MacBook Pro's have the smaller PCMCIA slot so you can't transfer without a P2 viewer or reader. The good thing about the reader is it has 6 slots so you can just setup your transfers and then go away for a bite, come back and it's all done, rather than swapping cards etc.
All in all a great workflow. The only problem I have experienced is a couple of cards I had became corrupted, although they played fine in the camera. I was able to record off the material via HD SDI and save it, it just wouldn't show up in the reader/viewer.
The flexibility of the P2 system in terms of shooting formats, under and over cranking etc is fantastic, very much another step towards achieving filmic quality with digital equipment.
I don't know if there are any real benefits to be had by shooting in HD and resolving down to SD. You'll end up just loosing a lot of frame info in the transfer and you'd be hard pushed to see any discernable difference between good quality SD and the route you propose.
Having said that, investing in HD is a good move as will only get more widespread and lets hope that the formats calm down a bit!

SAP TAO pro and cons

Hi all,
I was wondering if anyone can help me with the pros and cons of considering getting SAP TAO.
Thank you.

Hi,
There are sevaral post about the documents of SAP TAO. Why dont you consider that?
SAP TAO (Test Accelerator & Optimizer)
SAP TAO
sap tao
Rajeev

Pros and cons Demand Planning in APO or ECC

Hello,
is there a paper/pdf out there describing the pros and cons of DP in APO and ECC. We are planning to implement demand planning and are in an evaluation face whether to go with an APO solution or not. The financial aspect is not an issue. We already have the licensing in place for APO and ECC.
Which solution provides better flexibility and usability? Have any of you guys got experience with implementing demand planning in a non-manufacturing orgnisation. That is we are looking for a tool to forecast/plan external and internal procurement.
Any suggestions are welcome.

Hi ,
Definitely APO DP have many advantage over ECC.
=> More Flexibility than ECC demand management
=> Complex statistical tool can be used for forecasting
=> Complex macros can be build as per the business need
=> Easy visilbility & maintenance of the data
=> Advance Demand planning functionalities like Promotional planning, LCM, Management decisions, etc can be incorporated easily.
Also refer the details provided in the below thread for more details:
General Discussion - Why to choose APO over R/3 for planning?
Re: General Discussion - Why to choose APO over R/3 for planning?
Hope this helps,
Nawanit

I need to reinstall my computer, how do I deal with Premiere pro and After effects?

Hello,
As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
I have Creative suit production premium, I also have the free Creative cloud.
It is only Premiere pro and After effects that I am using and am worried about.
Thank you for any help.
-Lisa Kajupank
(and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
Message was edited by: umustbejoking

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(84620)

Pros and Cons of using JBDC Adapter with XI

Hi Experts,
Can somebody help me understand pros and cons in using different JDBC adapters with XI?
I would be really greatful to you.
Thanks & Regards
Gopal

Hai,
Go through the links:
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
Regarding JDBC Adapter in SAP XI
Configuring File and JDBC adapters
Thanks,
Rajani.

What are the pros and cons re using an intel iMac vs MacPro with LP8?

I'm considering getting a new intel Mac in the near future (presuming a new MacPro will be released in the near future - maybe at the same time as Leopard). I compose largely for film and television and I am composing largely using a combination of loops, software instruments and some recorded live performance. I usually sync to a low res quicktime movie.
I do like the idea of a simple and uncluttered work environment with an iMac, added to which there's also a degree of portability with the iMac however the MacPro is obviously more powerful. I'm not sure how much the difference in power between the two computers would affect me.
Would I be compromising myself much if I went for the iMac over the MacPro? What are the pros and cons of the iMac vs the MacPro in relation to Logic Pro 8?

In the world large-scale music composition using samples, loops, etc (especially for film) your two biggest needs are RAM and HD speed/access. The imac looses big time in this department (as a single computer at least) as it can only be upgraded to 4gb ram, and only holds one internal HD, and also lacks any PCI expansion for DSP cards, audio interfaces, etc.
In generalyou want to separate your data vs applications as much as possible, to ensure both can be accessed quickly and easily by the computer. So its best to have your system software / applications on one internal HD, and your logic data (samples, audio recordings, loops) on another drive(s). You can do this with an iMac via USB, FW800, & FW400, but depending on how big your projects get, how many USB and FW drives / interfaces you use, and how much data you need to stream, you could overload the buss on the imac (not sure if it has multiple busses or not). Plus speed wise, internal SATA are much faster than external drives, and the mac pro with its 4 internal slots seems like a great choice for speed and flexibility.
However, if you dont find yourself doing large scale projects, then you might be better off going with an imac. We just purchased one for my father and it runs great! It blows the socks off of my Dual 2.5 G5 tower in terms of CPU speed! If you run into problems running things from the imac, you could always add a mac-mini down the road to stream sample libs, as a Logic node, etc, which seems to be a much more cost effective solution.
I hope this was helpful, but I probably just made the decision harder . In fact, if I were to start over today, I dont know if I'd go with a MacPro, or an iMac / mac mini combination. they both seem to have their advantages / disadvantages.
Best of luck!

Pros and cons of creating a table with key

Hi Folks
I have some tables where there is no key defined in the source system. What is the best way to build such tables. In my case the source system is Teradata.
I have 25-30 columns in dimension and what is the best way to load this data where there is no.
What will be the Pros and Cons if I have a table without a key or if I create a table with 25-30 keys.
regards
Poonam

I recently purchased a Mac Mini and am using it with my TV. Here's what I found:
Using the HDMI connection on the Mac Mini, the image on the TV is very harsh. It's very bright, high contrast and garish colors. I did a lot of testing and am convinced this is due to the HDMI Display Profile in OS X Yosemite. I could not find any way to change the display profile in the Mac Mini as long as HDMI was the connection.
Using the miniDisplayport/Thunderbolt connection on the Mac Mini, with the Apple miniDisplayPort-DVI adapter and a DVI-HDMI cable the picture is perfect. (Note, however, that this connection only carries video; if you want audio you will have to use a separate cable to connect the Mac Mini audio line out port to your TV's audio line in port.)
That said, the larger the TV the less quality you will have displaying text. I suggest using a 21" or smaller TV as a monitor if you will be doing text work.
My setup is with a 40" Sony Bravia 1080p HDTV and the primary use is for video (concerts, movies, Skype, etc), not office apps. As I said earlier, the picture is perfect - brightness, contrast, colors, resolution are as nice as I could ask for.

What are the pros and cons of running iTunes from an SD card with a Retina MBP?

Hello,
I'm thinking about getting a Retina MBP, but I think the default storage of 256GB is way to small to be used as a main computer and the upgrade to 512GB is very expensive. I was thinking of ways to reduce bulky files and was considering running iTunes from an SD card. Does anybody have any experience with doing this, what pros and cons did you discover?

I wouldn't even try storing multiple iTunes libraries on SD cards. Better idea - what I do - is store the majority of my music on an external hard drive and just my 'must have' tunes on my internal SSD. I have a 512GB SSD and use around 170GB for iTunes. On my external drive, I had about 440GB in tunes (last time I checked).
You can 'switch' libraries by holding down the option key when you launch iTunes. It's the best of both worlds - storage for on-the-go, must-haves, and an entire library of "all" of my music.
256GB should be plenty of space - I just store so much music on my internal SSD because I can!
Clinton

What are the pros and cons of using people keywords, given that my catalogue is already uptodate with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

What are the pros and cons of using people keywords, given that my catalog is already up to date with regular keywording of all subjects? e.g., will the people keyword transfer to other programs?, can I use the same name for a people keyword and regular keyword in the same photo?

Pros and cons in setting AD domain trust into my AD domain for more than 10+ AD domain and some with same FQDN or label ?

Hi,
Can someone please share what is the pros and Cons of trusting AD domain for more than 10 different AD sites into my existing single domain forest let say ParentCompany.com ?
At the moment I only have one single forest AD domain with the Domain and Forest functionality Windows Server 2003. The main domain controller FSMO role holder is in the Data Center spread across three different VMs running on Windows Server 2008 R2.
The main/parent company has acquired smaller business chain of 15+ offices in which they have their own Domain Controller and also their own domain, sometimes they also got the same AD domain between them (no trust or whatsoever in those 15+ AD domain).
Sounds crazy but yes, there is no standardization in them or whoever manage their IT infrastructure previously.
I'm now considering what are the benefits of creating the AD domain and trust versus importing those AD objects into my domain and then decommission them.
No need to worry about Exchange Server since all of the user in those sites connecting to the RDS to my ParentCompany.com terminal servers.
My requirements or goal are as follows:
1. Simplify the AD domain structure & maintenance
2. Try to avoid the disruptions of the user in terms of downtime and selecting multiple different domain everytime they login to their PC or SharePoint sites.
any kind of help and suggestion would be greatly appreciated.
Thanks.
/* Server Support Specialist */

Can someone please share what is the pros and Cons of trusting AD domain for more than 10 different
AD sites into my existing single domain forest let say ParentCompany.com ?
I think you mean 10 AD domains.
Managing multiple domains can be difficult for administration. I usually recommend using a single domain in a single forest with OUs to separate resources whenever it is possible.
However, if you can't do that then you can simply create trust relationships between your domains. The advantage is that you can enable access to resources to different domains. I do not see cons here.
The main/parent company has acquired smaller business chain of 15+ offices in which they have
their own Domain Controller and also their own domain, sometimes they also got the same AD domain between them (no trust or whatsoever in those 15+ AD domain). Sounds crazy but yes, there is no standardization in them or whoever manage their IT infrastructure
previously.
I'm now considering what are the benefits of creating the AD domain and trust versus importing those
AD objects into my domain and then decommission them.
I would recommend consolidating your domains into a single one. ADMT is a migration tool that you can use. The advantage would be the ease of administration. Also, by having multiple DCs for the same domain across sites, you will take benefit of High Availability
of your and DRP.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Problem with Adobe Pro and Reader on terminal server

Hi,
We have have a Terminal Server environment with Adobe Pro and Reader. We have security for Adobe Pro, so only certain user has access to Adobe Pro and all users has access to Adobe Reader.
Some users receive many email with pdf's attachments in Outlook and need to print these attachments. They use the Outlook function to print email and attachment automatically. The users who has access to Adobe Pro can print attachment automatically with no problem.
The problem is user who only have access to Adobe Reader. The user can't print attachment automatically with the email, only the email is printed. But, they can open attachment and print with Adobe Reader. But, it's impossible to open each attachment because there are so many.
Thanks for your help.
Jonathan

Hi,
So if I understand correctly,
1. You have installed Acrobat Pro & Reader on a Terminal server.
2. You have created a security group in your Active Directory Users & Computers for users having access to Acrobat
3. You have set permissions on C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe and C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrotray.exe on the terminal server and provided access only to the security group created above.
4. Users are accessing the Terminal server through RDWeb or connecting remotely through MSTSC (RDP) or using a .RDP file
5. Users get emails with PDF attachments and print the mail directly without opening the PDF in Reader.
Users check the box to print the attachments with the mail (see snapshot below):
Some questions:
1. What is the OS and platform (x86 or x64) of the terminal server?
2. What are the versions of Acrobat & Reader on the terminal server?
Thanks,
Vinod

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

Hi ..
Shift key boots into Safe Mode, not Recovery.
This only works on a Mac running v10.7 Lion or later.
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
If you can't boot into Recovery Mode, help here > Mac OS X: Gray screen appears during startup

Hearing conflicting reports. What camcorders work best with macbook pro and imovie

I am looking to purchase a new HD Camcorder, but Im told some of them dont work well with macbook pro and Imovie.
Im in the process of buying a new iMac and want to make sure I will be able to load the movies direrct to imovie.
Thanks.

This forum is for mobile iMovie (iPads & iPhones).
you may need the iMovie Mac forum:
https://discussions.apple.com/community/ilife/imovie

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

CCM 9.1 dial plan with 11 digits Pros and Con

Similar Messages

Maybe you are looking for