CCM and Tomcat 5.5.20

We have Inxight SDX Admin Server already installed and it has it's own Apache. We installed Tomcat 5.5.20 seperately and BOE XI 3.1. It tried to point to the Inxight Apache and the CCM won't start the Tomcat. How can we repoint the CCM Tomcat to the newly installed Tomcat that works?

We have a tried a similar approach with Crystal Reports Server 2008, installing it side by side a previous version of CR. I'm not sure how BOE XI 3.1 works, but is TOMCAT installed and configured within the installer app of BOE XI? In our case it was. I went ahead and uninstalled CRS2008 and reinstalled, making sure on the install setup to have TOMCAT point to a different port than our previous installation did. This allowed CRSXI to access a previous version of TOMCAT configure for port X, and CRS2008 to access the newest version of TOMCAT on port Y.
Hope this helps!

Similar Messages

After BI install SIA and Tomcat could not start with service account.

Hi BO Gurus,
I want to install BO child node (Expand the parent install)
Client IT prepared a system with MS Server 2012 with Windows 8 as OS, and assigned a Service Account for me.
I gave service account following permissions -
Act as a part of operating system
log on as a batch
log on as a service
After this I rebooted the system and logged in with Service Account credentials. Started the installer, performed custom/expand install.
the install was successful.
When I opened CCM, both Tomcat and SIA are running under 'localsystem' account.
I want them to run under service account --> i sopped SIA and changed credentials in 'Log on as' box under SIA properties.--> Click on 'apply' and 'OK'
When I go on and start SIA I get following error -
' The Service did not start due to log on failure'.
The same service account runs services on 3 other BO boxes including parent node of the above install and 2 other DS boxes and everything apart from this machine works exactly fine.
Please help!
Thanks,
Maitreyee

Maitreyee,
BI 4.x Platform will NOT work on Desktop OS like Windows 7 / 8.x / 8.1, it required 64bit Server Operating system. See attached screenshot.
Regards,
Ajay

CCM and CMC suddenly disagree about a specific server's state

Hello,
My version is XI R2 SP1, with 3 windows hosts :
H1 for CMS
H2 for tomcat
H3 for all other servers, like report and job servers
My platform works mainly properly, but from time to time, CMC shows the webi report servers as red.
It becomes impossible to view reports thru infoview ("could not initialize report engine server (Error RWI 00226) (error : INF)")
Yet, CCM and windows service manager on H3 still say that this service is up.
Each time this happen, event viewer on H1 shows this warning : "Unable to contact server H3.Web_IntelligenceReportServer.webiserver to change its enabled status. Please restart it."
I haven't seen any other message at the same time elsewhere.
It looks like as if the CMS suddenly lost the real state of this server.
Starting it again thru CMC is also impossible : it says "service has already the state requested", which is true... But CMC still shows it as red.
The only way to solve this is to stop/start the service thru CCM.
It always works, but it's a manual operation, and I would like to fix this so that user never have "INF" errors...
Has anybody an idea ?
Thanks

Hi Francois,
i saw this behavior also a few times. Mainly on Platforms with an very old SP status like yours (SP1). The latest SP for XIR2 is SP5.
Maybe you try to upgrade to SP5 on your dev. environment first to check if all still works and your Problem is also solved.
Regards
-Seb.

Communication problem between NetBeans and Tomcat

hi!
i got a quite mysterious problem. here is what happens:
- i start NetBeans 5.5.1 (the first time)
- i want to debug my JSF-Project, the Debugger starts
- After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
- Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
okay.
when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
But the story goes on:
When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
thanks,
flo.
some system-info:
- windows vista business 32-bit
- no firewall is running
- AntiVir Personal Edition IS running
- Yahoo Widgets Engine IS running
- no other software is running
and finally the tomcat-log:
Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
Listening for transport dt_shmem at address: tomcat_shared_memory_id
21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1862 ms
21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
21.09.2007 18:27:54 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3626 ms

As i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
I hope this help you

Problem launching a jsp page with eclipse and tomcat

Hi,
I have just started using eclipse and tomcat for creating dynamic web pages. I tried to launch a jsp page after starting the tomcat server with the URL: http://locahost:8080/HelloWorld/, an error page was displayed as below:
HTTP Status 404 -/
type Status report
message /_
description The requested resource (-) is not available
Apache Tomcat/5.5.17
I didn't get any error at the console and when i just typed http://localhost, a pop up menu saying that the connection was refused when attempting to contact localhost.
I'm not sure what is the problem here. Could it be the permssion to the localhost is not granted by the system as the eclipse IDE is running using linux?
Hope someone can help.
Thanks.

http://www-128.ibm.com/developerworks/library/os-ectom/

Right problem with apache and tomcat

Bonjour;
I use a user login "apache" to stop/start Apache and tomcat. Because never launching apache et tomcat as root.
But I have the following problem with apache (file error.log) :
[Tue May 6 17:26:22 2003] [error] Connection "warpConnection" cannot connect
[Tue May 6 17:26:22 2003] [error] Cannot open connection "warpConnection"
[Tue May 6 17:27:01 2003] [error] Re-Trying to deploy connections
As root the error msg does'nt exists (lost)
Best regards;
A+;

Run it from the shell to see whats wrong:
# httpd

Authentication problem with JWS and TOMCAT

Hi everyone !
I have a problem with Java Web Start (1.0.1) and Tomcat (4.0.4).
I'm trying to call my application via Web server Tomcat with restricting access.
My configuration is the following :
The deployment descriptor web.xml is:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<mime-mapping>
<extension>jar</extension>
<mime-type>application/java-archive</mime-type>
</mime-mapping>
<mime-mapping>
<extension>java</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jnlp</extension>
<mime-type>application/x-java-jnlp-file</mime-type>
</mime-mapping>
<mime-mapping>
<extension>JNLP</extension>
<mime-type>application/x-java-jnlp-file</mime-type>
</mime-mapping>

<security-constraint>
<web-resource-collection>
<web-resource-name>Entire Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>

<role-name>standard</role-name>
</auth-constraint>
</security-constraint>

<login-config>
<auth-method>BASIC</auth-method>
<realm-name>MY APPL</realm-name>
</login-config>
</web-app>
And jnlp File is:
<jnlp
spec="1.0+"
codebase="http://host:8080/Official/"
href="Application.jnlp">
<information>
<title>Application release 0.10</title>
<vendor> XXXX </vendor>
<homepage href="/"/>
<description>Application</description>
<description kind="short">My Application</description>
<icon href="Icon.gif"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.3"/>
<jar href="Jar1.jar"/>
<jar href="Jar2.jar"/>
<jar href="Jar3.jar"/>
<jar href="Jar4.jar"/>
<jar href="Jar5.jar"/>
<jar href="Jar6.jar"/>
<jar href="Jar7.jar"/>
<jar href="Jar8.jar"/>
<jar href="Jar9.jar"/>
<jar href="Jar10.jar"/>
<jar href="MyApplication.jar"/>
</resources>
<application-desc main-class="com.xxxx.tool.cm.MyApplication"/>
</jnlp>
With the above configuration the Java Web Start not work.
I'm expecting the message box for insert username and password instead it returns the messagge error :
An error occurred while launching/running the application.
Vendor: XXXX
Category: Download Error
Unable to load resource: http://host:8080/Official/Application.jnlp
The Exception error is:
JNLPException[category: Download Error : Exception: java.lang.NullPointerException : LaunchDesc: null ]
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
     at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I have tried to remove the restrict access in the deployment descriptor (web.xml) and java Web Start WORKS !!!!!!
I'll appreciate any idea or hint!
Thanks in advance

Check this out
http://forum.java.sun.com/thread.jsp?forum=38&thread=456250
Mad Einstein

Why do I need to restart Apache and Tomcat every time a java file is change

If a java file is changed and complied the changes are not reflected if Tomcat is not restarted.
The settings in server.xml are as:

<Context path="/manager" docBase="manager" debug="0" privileged="true"/>
<Context path="/cf" docBase="cf" debug="0" reloadable="false"/>
Here "cf" is my Application folder under webapps. The reloadable property when set to "true" for standalone Tomcat on Windows98 reflects the changes for compiled java files without restarting Tomcat. But on Linux 7.1 with Apache 1.3.19 and Tomcat 4.0.3 this is not working.
Also tried out with Manager Application of tomcat-users.xml with reloadable="false" as well as reloadable="true",
But when I reload the application using the command
http://servername:8080/manager/reload?path=/appli.name
It tells me that the application is reloaded but changes in the java file are still not reflected.
Also when reloaded through Manager Servlet, Only my load-on-startup servlet is reloaded, but other java classes are not.
Is it neccessary to execute this reload command from the server itself. I m executing it from a remote m/c. and have mapped the application with a domain name virtually.
Is it the case with Tomcat on Linux with Apache. Or is something going wrong on my part.
Can someone Help out plz.
Regards,
Rupali

or you can "touch" your web.xml file.
touch web.xmlor that command is for *nix systems, not sure what the Windows command is. But basically, when you edit the web.xml, even if it means updating the last modified time, it will restart only your application and you should see the changes.

NetBeans 5.0 and Tomcat 4.1

Hello,
I'm using NetBeans 5.0 and I have been using the Bundled Tomcat version 5.5.9 for my servlet container and everything's been great. Now that I'm ready to push my application up to a web host, I found that my host (lunarpages) runs with Tomcat 4.1 which uses version 2.3 of the servlet container. Tomcat 5.5 uses servlet container 2.4.
So I downloaded Tomcat 4.1 (which has 2.3) and I don't know how to properly tell Netbeans to use it. When I open Server Manager and select 'Add Server', I can't just tell NetBeans to point to my Tomcat 4.1 directory. It wants me to select from a dropdown list of servers and Tomcat 4.1 isn't in the list.
I tried to fake NetBeans out by selecting the 'Tomcat 5' server and pointing to my Tomcat 4.1 directory but I'm getting the following message when I try to run:
FAIL - Unknown command /deploy
C:\workspace\myApp\nbproject\build-impl.xml:425: Deployment error:
Can anyone point me in the right direction on how to get Tomcat 4.1 running with NetBeans 5.0?
Thanks,
Eric

I found that my host (lunarpages) runs with Tomcat 4.1 which uses version 2.3 of the servlet containerPlease read the post before answering, the reasoning is crystal clear.
I don't have a concrete answer to this problem, but I do have a suggestion.
1) You can add your own tomcat server to netbeans. Under the runtime tab you will find servers, if you right click this you can add a server. Use this to manually configure your own server
2) as for the servlet spec problem, when creating a web project setting the java EE version to 1.3 might solve the problem... I can't tell this for sure because I've never done it.

How to install Java and Tomcat on my VPS

Hello,
I am new in Java.
I would like to install Java and Tomcat on my VPS server.
Do you know which doc or info i should read?
Thanks a lot.
Gil

The free Perian will do it for you automatically.
Additional free new machine setup stuff:
Install and update your Flash here
http://get.adobe.com/flashplayer/
Install Perian (addiitonal Quicktime codecs)
http://perian.org/
Install the Unarchiver (uncompress software)
http://wakaba.c3.cx/s/apps/unarchiver.html
Flip for Mac (for Windows media in Quicktime)
http://www.telestream.net/flip4mac-wmv/overview.htm
VLC (plays anything just about)
http://www.videolan.org/
Easy Find (finds everything on a Mac)
http://www.devon-technologies.com/download/index.html
OnyX (maintenance, cleanup, repair utility)
http://www.titanium.free.fr/

Regd: CCMS and Alert ?

Hi @,
I have some doubts regd CCMS and Alert :
1.Whether CCMS config is mandatory to use alerts ?I havefound in some places tht it is not required then where will be alert available if i trigger
2.Steps to configure CCMS to include XI as it is not configured in my system?
REgards

1.Whether CCMS config is mandatory to use alerts ?I havefound in some places tht it is not required then where will be alert available if i trigger: AlertInbox
2.Steps to configure CCMS to include XI as it is not configured in my system?
Follow these guidelines:
Alerts
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
CCMS ALERTS
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3

Preinstalled apache, apache2 and tomcat

Hello,
I'm setting up a Sun Fire V490 running solaris 10 for use as a web server. I need to have Apache httpd version 2 and tomcat version 4.x to run.
So I found that the machine comes with apache httpd 2 preinstalled and also apache httpd 1 with fully integrated tomcat engine.
But as stated I need to have apache httpd 2 with tomcat running!
Apart from configuring the system to run httpd version 2 instead of version 1 by use of svcadm, I'm wondering how to get a solid solution to also have tomcat running. Ok I could simply install a tomcat version from apache.org, but I would like to ensure that this is the right solution for e.g. future upgrades.
So if anybody has got some more knowledge but this issue, I would be happy about letting me know!
Thanks, Raimund

Hey, I came into the same question while configuring tomact on Sun server.
So, what did you finally do...........?
any help will be great....
Thanks,

Setting up eclipse and tomcat

Does anyone here have any expertise configuring these two products?(eclipse and tomcat)
I have my tomcat server running and it process them jsp pages just fine. I have also installed the plugin to get tomcat configured with eclispe.
I am just having problems running a jsp file directly from tomcat. it always points to a file on the hd and not to the webapps area like it's supposed to......

Sure - we use that combo for development all the time.
What's the problem specifically? Did you create a new Tomcat project in Eclipse? If you did, then it will automatically add the project's web path as a context to Tomcat, and you can browse directly to it using your browser.
FYI - note that the context that is created is going to point to the eclipse workspace directory - NOT the default webapps directory that you might have configured for Tomcat. That's OK.
- K

Eclipse and Tomcat questions

Hi everyone,
Lastnight I setup Eclipse to work with Tomcat, which works very good, but there are something I don't understand.
1. My files are put in my workspace in (C:\Documents and Settings\...etc)
How does Tomcat (which is installed in C:\Tomcat) know that it should get the files from my workspace directory?
Because in the C:\Tomcat directory I can't find any .XML file that refers to my workspace directory.
2. How I developed my servlets till now, I had some other free editor, I needed to compile my servlets then restart Tomcat and then test it.
With Eclipse + Tomcat plugin, all I need to do save the servlet and apparently the source code is compiled automatically. All I need to do is refresh the servlet in my browsers (very handy and easy to develop like this). But my question is, does Eclipse compile the servlet automatically after saving? And why doesn't tomcat have to be restarted?
Just a few questions to understand it a bit better, I'm really happy with this setup as it makes everything a lot easier.
Regards,
Steven.

I believe you will need to become familiar with and install:
http://www.eclipse.org/webtools/
HTH
Darins
"raul" <[email protected]> wrote in message
news:b894c367f9750f367a2e8336f8fe93b1$[email protected]..
> Hi, I downloaded the latest version of eclipse 3.1 and I've installed
> apache tomcat in mi PC.
> Eclipse has a plugin : org.eclipse.tomcat_4.1.30.1
> My problem is that I don't know how to use the tomcat server with eclipse.
> I readed some tutorials and they say that I have to configure using menu
> Window > Preferences and then I will see the tomcat option. But that
> option doesn't appears or I couldn't see it.
> Another tutorial say that I have to activate a plugin in the following
> menu location: Window > Customize Perspective > Commands and select the
> checkbox for tomcat , but that option doesn't appears either.
> What can I do, I want to use eclipse and tomcat together...
> Can someone help me with this questions?
>
> Thanks so much.
> Raul Torres
>
>
>

Jsp import package error after upgrading to jdk1.4.2_08 and tomcat 5.0

I am trying to upgrade the jdk and tomcat from 1.3/3.3 to 1.4/5.0.
My jsp imports worked fine prior to the upgrade, but now I get the following:
Jun 6, 2005 10:01:17 AM org.apache.jasper.compiler.Compiler generateClass
SEVERE: Error compiling file: /C:/Tomcat/work/Catalina/localhost/Print//org/apac
he/jsp\BillingPrompt_jsp.java [javac] Compiling 1 source file
C:\Tomcat\work\Catalina\localhost\Print\org\apache\jsp\BillingPrompt_jsp.java:11
: package com.adware.print.database.inquire does not exist
import com.adware.print.database.inquire.*;
^
1 error
A fatal error has occured for user: Unable to compile class for JSP
Generated servlet error:
C:\Tomcat\work\Catalina\localhost\Print\org\apache\jsp\BillingPrompt_jsp.java:11
: package com.adware.print.database.inquire does not exist
import com.adware.print.database.inquire.*;
The package in the import statement "import com.adware.print.database.inquire.*" actually has no classes in it. The classes are contained in "import com.adware.print.database.inquire.controller.*". If I change the import statement everything works. The problem is that I have 100s of jsps. If there is a work-around outside of changing the import statements, that would be best.
Can anyone help? Thanks.

do you know what url is being looked up? the message is complaining that the url is starting with the string "an]", which seems pretty bogus.

CCM and Tomcat 5.5.20

Similar Messages

Maybe you are looking for