CCM CAC Problem

         hi everyone ,I have one problem as follow:
        Site A ,Site C and Site B ,three sites. CCM CLUSTER at Site B. A,B and C connect each other use 1M bandwidth. but our customer want to site A phone call site C pass B when bandwidth insufficient. how to implement this requirement ?
          I get stuck here .Please help me ! thanks a lot !

Hi,
I believe you can not do it by CUCM configuration. It is more of any routing the VOIP packets which has to taken care by routing protocol.
AAR will come in to play when CAC restrict the call due to low BW and AAR do not decide on which WAN path the VOIP packet goes.
Regards
Ronak patel
Rate helpful posts.

Similar Messages

CCMS Configuration Problem

Hi Experts,
I have a problem. Since I havenu2019t done this before I have very little clue about it.
I have a testing server ABAP + JAVA. I have created 2 nodes in ccms:- Monitor Database and Monitor Spool using RZ20. When I am looking in Monitor spool its showing green status. MTEs are working.
But in case of database its showing grey. All the Mte's are also showing grey. When I am looking into the properties its showing No method assigned.
   Database monitor
          Db monitor
              KEM\Database\...\Backup\...
                  BackupData
                  BackupLogs
                  Recovery
                  Restore
              KEM\Database\...\DBSystemCheck\...
                  DBConsistency
                  DBLogfile
                  DBProfile
                  Environment
                  OtherDBSystemCheckTask
                  Security
All the above are grey. Can anyone please help.
Thanks,
Santanu

Hi,
Please refer the following link:
http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm
Hope this helps.

CCM performance problems table info needed!!

Hello,
We have iimpemented SRM50 wit hCCM 200_700 level 6. We have serious performance problems when uploading content and publishing the catalogs. Does anybody know, as we have 29 procurement catalogs, if for all catalogs the entres are entered in the table /CCM/D_ITM.
We have 29 catalogs but only 4000 items so we think the entries are double. How many items and catalogs should CCM be able to handle ?
Thanks of course i will reward points
Kind regards,
Antoinette Stork

Hi,
See this related thread/notes:
Re: items in catalog not flagged as "approved"
Note 919725 - BBP_CCM_TRANSFER_CATALOG - Performance Improvement
BR,
Disha.
Do reward points for useful answers.

CCMS performance problem

Hi!
We use SAP Solution Manager 4.0, SPS 13 for System Monitoring of almost 100 systems.
We configured SOLMAN as CEN system and activated the CCMSPING with push option.
For almost the 2/3 of the systems we configured SAPCCM4X agents.
Our current problem is a performance issue in tcode DSWP. When we try to enter into one of the solutions there (by pressing on it) we get the following warning:
Determining warning messages from CCMS
It tooks a while and then it is possible to enter into the solution.
My important question is of course:
How can this issue be solved?
Is there some techniques to analyse and change the problem
As I know there are two ways of sending/retrieving the data:
via RFC (pull)
via CCMS (push)
Which method is faster?
Is there some changes in CCMSPING possible? (interval for sending/retrieving the data)?
Is there some other settings (like profile parameters e.g. rdisp/...) that could be performed to solve the problem?
Thank you very much for any helpful information
Regards
Thom

Hi Markus!
>Determining warning messages from CCMS
>It tooks a while and then it is possible to enter into the solution.
The SOLMAN asks for monitoring data alls the solutions to get this data in tcode DSWP.
>The interesting question is: What is the system doing? What do you see in SM50/SM66 when you try to >get into a solution and the system displays that message?
The two involving dialog processes are:
1) DIAG, status: on hold, Report: SAPLSALC, user: <my_user>
2) DIAG, staus: running, Report: SAPMSSY0, user: CSMREG
Do you have enough information to give some suggestions?
Thank you
regards
Thom

CCM login problem

Hi
I am having problem with login to CCM through URL.
I have created user with Catalog_manager and Content_approver roles assigned in CCM.
When tried to login CCM URL it says UID/Pwd not correct.
Where should we create user for CCM login. In SRM or CCM.
Do we need to have RFC connection from SRM to CCM?
If you have steps how to connect CCM with SRM please share with me.
Secondly can you tell me what is Standalone scenario in CCM?
Thanks
Jagdish

Hi Jagdish,
For working in CCM to maintain catalog or to manage content you have to create dialog user in CCM. However user who has to create SC in EBP thru catalog may be created as service user in CCM.
You have to maintain RFC connection for both CCM and EBP in both system by SM59 . Pls. do maintain logical system also.
In case of Standalone deployment scenario you may have SRM(EBP) , CCM , CSE and CAT in one single deployment.
In this deployment use of XI is optional.
For more details go to following site:
https://websmp106.sap-ag.de/ibc-srm
Path>Integrated Business Content>......mySAP SRM> Catalog and Content mnagement> Business Scenario Configuration Guide
Good Luck

CCM Mapping problem

Hello CCM Gurus,
We are using CCM 2.0 and SRM 5.0. I made some new heading characteristics (the same level like the default characteristics, not schema, not category characteristic), but when I made the mapping (category-category) these data not mapped to the target catalog except the data of the default characteristics. I can't understand what is the problem. Any idea???
Thanks and regards
Almos
Message was edited by: Álmos Paksi
Message was edited by: Álmos Paksi

Almos: as I understand, you added some custom characteristics at catalog level - where all /ccm/* characteristics are maintained. Now these characteristics are not "taken" by the assignment/mapping. Hmm...
One solution is to map these characteristics manually, one by one. Another solution - assign them to schema level, instead of catalog level, and then do the automatic mapping. Yet another option is to open an OSS message (if you REALLY need those chara's at catalog level, and feel that the mapping issue is a bug).
The reason for your issue could be that standard /ccm/* characteristics (that reside at catalog level) are pre-mapped by default, and maybe SAP never bothered to process any other catalog-level characteristics during automatic mapping.
I've always tried following an unspoken rule to assign custom characteristics at schema and category levels only. Having said that, the distinction between assignment at schema and catalog levels has never been clear to me, nor did anyone I asked, including SAP guys, know the difference.
Cheers,
Serguei

CCM Backup problem

Dear Networkers,
I am facing a problem when I try to backup our CCM, software version is 5.1.2.1000-11, it seems that the Host key verification.
I upgrade the CCM, and the problem still occurs.
on the other hand , we have another cluster and I can take the backup. Therefore ,there is no problem with the SFTP server.
Please find attached log file.
Kindly your advice

Dear All,
I am also using a standalone backup server and I have installed SFTP server on it, however I still cannot complete the network location step as I always receive this error " cannot retrieve details from destination".
Do you prefer a specific SFTP software ?
Regards,
Mo

CCMS Long Description

Dear Experts,
We have a requirement. The alerts that are raised in a PI System to be transferred to CCMS with long Desciprtion.
The function module that populates details into CCMS is SXMB_MON_ALERT_MSG_ANALYZE from SXMB_MONI(Runtime Workbench)
The Tables parameter for this FM is of type ALTLEXDESC.
We may need to extend this ALTLEXDESC to accomodate the long description.
Our concern is how to get the long description. We could see long desciption in RWB.
The long description will look similar to
Error found in the MAPPING.EXCEPTION_DURING_EXECUTE for the MAPPING Category in a message ID 7E8E03CCD98D43271412FFE59F820080 for the Interface MI_SUMI_FlatFile_ABS from the Sender Party <Name of sender Party>.
We also figured out that we can populate them from Container expressions.
Also there is an background job running for the flow from RWB->CCMS for every 5 mins.This also needs to be debugged.
Job Name : SAP_BC:PRPGT.XI.ALERTS.TO.CCMS
Function Module: SXMB_MON_ALERT_MSG_ALERTCAT
Report : SXMSALERT_ACTIVE_ALERTS
Need to find out how the flow of messages from RWB->CCMS
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
--Ragu
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 10:41 AM

Hi,
In CCM the problem the problem you have can be easily solved. There is a BAdI
BBP_CCM_CHAR_MAINT where you can implement the transport of additional
characteristic values. In your case you simply have to implement the
method valuate_product to fill the valuation of the Detailed Description
from product master to /CCM/LONG_DESCRIPTION.
I assume for SRM-MDM this Badi is still valid, maybe someone with expertise in the SRM-MDM area can calrify this.
Regards,
Jason

Alert is finished, but ccms is still red

Hallo,
we had some alerts in the ccms. Problems are corrected and all open alerts finished, but the ccms still red.
How to restore to green status?

Hi,
You must complete the alerts in CCMS. Completing them in the Alert Inbox has no influence on the status of CCMS.
Perhaps this is your issue? If this is the case then remember to complete all alerts of the relevant type. This should get your status back to green again for the chosen alert type.
- remember that for any given date you will only see 1 alert at a time in CCMS. So that when u complete that alert more could be present. Using standard configuration CCMS is updated every 5 minutes...
Hope it helps.
Best Regards,
Daniel
Edited by: Daniel Engsig-Karup on Oct 30, 2008 8:44 PM

CCM in same client. advantages & drawbacks.

Hi everybody,
I am in a new implementation with CCM 2 as purchasing catalog, and I have a doubt. I have read the landscape options document and I understand when I should use CAT & CSE in different systems. But I don't know which are the reasons for deciding to work with SRM and CCM in the same or in differents clients. Some clear thinkings about this?
thanks

Hi
It is generally optional and depends on the complexity of your system landscape - Incase it is working fine in a one single client, then you don't need to go for multiple clients landscape.
Please refer to these links.
<b>CCM cross-client ?
https://forums.sdn.sap.com/click.jspa?searchID=1939151
How to access CCM Data from external applications?
<u>Other links of interest -></u>
CCM Document
Transferring SRM Materials to CCM - SRM_EXTRACTED_CTLG
Problem with CCM view assignement
Catalog search (TREX)
I cannot access "Supplier Catalogue no" in BBP_DOC_CHANGE_BADI
Catalogue link disappaered.
CCM; Mapping problem between supplier and master catalog
Item deletion from procurement catalog in CCM?
Master Catalog in CCM
Characteristic /CCM/PICTURE not found
CCM 2.0 Simple search on CSE does not show any result
CCM Create catalog link
Material master decriptions using CCM 2.0
Uploading in CCM
CCM 2.0 - Upload
Distribute contract SRM to CCM
BBP_CATALOG_TRANSFER want to change the VENDOR TEXT to Internal Note
Regards
- Atul

Set BAPITID in JCO.Structure

hello all,
i'm using JCO to monitoring CCMS architecture; i need to read properties of each MTE of CCMS.
my problem is:
i have a TID set of value for an MTE and i want to get results from the bapi:
BAPI_SYSTEM_MTE_GETPERFCURVAL
my code:
nodes = table "TREE_NODES" resulting from BAPI_SYSTEM_MON_GETTREE call;
// set BAPITID structure as import param for bapi
IMetaData metaTid      = myJCORepository.getStructureDefinition("BAPITID");
JCO.Structure struTid = new JCO.Structure(metaTid);
struTid.setValue(nodes.getString("MTSYSID"),          "MTSYSID");
struTid.setValue(nodes.getString("MTCLASS"),          "MTCLASS");
struTid.setValue(nodes.getString("MTNUMRANGE"),"MTNUMRANGE");
struTid.setValue(nodes.getString("MTMCNAME"),      "MTNUMRANGE");
struTid.setValue(nodes.getString("MTUID"),           "MTUID");
struTid.setValue(nodes.getString("MTINDEX"),          "MTINDEX");
struTid.setValue(nodes.getString("EXTINDEX"),      "EXTINDEX");
JCO.Function getPerfData = createFunction("BAPI_SYSTEM_MTE_GETPERFPROP");
if (getPerfData != null)
JCO.ParameterList input6     = getPerfData.getImportParameterList();
// input param:
input6.setValue(struTid, "TID") ;
input6.setValue(user, "EXTERNAL_USER_NAME");
super.mConnection.execute(getPerfData);
// leggo eventuali errori derivati dalla chiamata alla BAPI
returnStructure = null;
returnStructure = getPerfData.getExportParameterList ().getStructure("RETURN");
System.out.println( "BAPI_SYSTEM_MTE_GETPERFPROP RETURN : " + returnStructure.getString("TYPE") + " " +
returnStructure.getString("ID") + " " + returnStructure.getString("NUMBER") + " " +returnStructure.getString("MESSAGE"));
JCO.Structure propertiesStructure = getPerfData.getExportParameterList ().getStructure("PROPERTIES");
// at this point my code return:
(error type 'E')
RA 341 No additional information available (function BAPI_SYSTEM_MTE_GETPERFCURVAL)
XAL 1.0 documentation write:
RA 341 : An unknown problem occurred during the execution of the method.
any idea?

hello i have found a solution, i hope this will be helpful for anyone.
this is an example using html auto generated template.
1. method call
            this.debugBAPI_SYSTEM_MTE_GETPERFCURVAL(
                 nodes.getString("MTSYSID")
                 ,nodes.getString("MTCLASS")
                 ,nodes.getString("MTNUMRANGE")
                 ,nodes.getString("MTMCNAME")
                 ,nodes.getString("MTUID")
                 ,nodes.getString("MTINDEX")
                 ,nodes.getString("EXTINDEX")) ;
2. method definition:
public void debugBAPI_SYSTEM_MTE_GETPERFCURVAL(String MTSYSID, String MTCLASS, String MTNUMRANGE, String MTMCNAME, String MTUID, String MTINDEX, String EXTINDEX)
System.out.println("debugBAPI_SYSTEM_MTE_GETPERFCURVAL") ;
JCO.Function function = mRepository.getFunctionTemplate("BAPI_SYSTEM_MTE_GETPERFCURVAL").     getFunction();
System.out.println("function : " + function) ;
JCO.ParameterList input2 = function.getImportParameterList();
JCO.Structure st = input2.getStructure("TID") ;
    st.setValue(MTSYSID,     "MTSYSID");
    st.setValue(MTCLASS,     "MTCLASS");
    st.setValue(MTNUMRANGE,      "MTNUMRANGE");
    st.setValue(MTMCNAME,     "MTMCNAME");
    st.setValue(MTUID,     "MTUID");
    st.setValue(MTINDEX,     "MTINDEX");
    st.setValue(EXTINDEX,     "EXTINDEX");
input2.setValue(<myR3user>, "EXTERNAL_USER_NAME");
mConnection.execute(function);
JCO.Structure currValStructure = function.getExportParameterList ().getStructure("CURRENT_VALUE");
System.out.println("currValStructure : " + currValStructure) ;
String oldMaxRows = JCO.getProperty("jco.html.table_max_rows");
JCO.setProperty("jco.html.table_max_rows", "99999");
currValStructure.writeHTML("c:
BAPI_SYSTEM_MTE_GETPERFCURVAL.html");
JCO.setProperty("jco.html.table_max_rows", oldMaxRows);
JCO.Structure returnStructure = function.getExportParameterList ().getStructure("RETURN");
System.out.println( "BAPI_SYSTEM_MTE_GETPERFCURVAL RETURN : " + returnStructure.getString("TYPE") + " " +
returnStructure.getString("ID") + " " +
returnStructure.getString("NUMBER") + " " +     returnStructure.getString("MESSAGE"));
open c:\BAPI_SYSTEM_MTE_GETPERFCURVAL.html and then check the result.

Using Contract with SRM-MDM using several Web Service ID's

Dear Experts,
ALL of our Contracts were created and still being created by adopting products from CCM, meaning BBP_PDIGP-CATALOGID holds the Web Service ID and BBP_PDIGP-CATALOGITEM holds the Catalog Item GUID.
When trying to create a Shopping Cart by selecting a Product from CCM and adopting it to the SC the system will assign the contract as a source of supply for this Product (of course if this product was
assigned to only one contact, alternatively if it was assigned to several contracts, all of those contracts will appear as available sources of supplies).
When trying to create a Shopping Cart by selecting a Product from the Internal Goods/Services and adopting it to the SC the system will assign the contract as a source of supply for this Product.
All the above is an acceptable system behavior.
Now we start testing the use of SRM-MDM in order to replace CCM, the problems weu2019ve notice are:
1. A product B1 that was assigned to a Contract using CCM is add to a SC from SRM-MDM catalog (a different Web Service ID), the result was that no Source of Supply was assigned to the Product B1 in the SC although only one released Contract exist in the system for the selected product B1.
2. The Central Purchasing department created a NEW contract by selecting a product A1 from SRM-MDM catalog; the Web Service ID is MDM1 assigned to a Named Search MDM_NS_1 allowing the user to see all items in the catalog. Now an end user, who is restricted to view only a part of the items in the catalog, is creating a SC by selecting the product A1 from SRM-MDM catalog; the Web Service ID is RESTRICT_MDM1 assigned to a Named Search RESTRICT_MDM_NS_1 allowing the user to see only a
part of the items in the catalog, the result was that no Source of Supply was assigned to the Product A1 in the SC although only one released Contract exist in the system for the selected product A1.
I found that the problem is in FM BBP_PD_INDEX_FIND in form FUND_ITEMS_ANALYZE where there is a determination for a valid entries according to search criteria that one of those is the Catalog ID.
Please share your thoughts about this problem and how i can overcame it.
Kind Regards,
Raz
Edited by: Raz Golan on Feb 26, 2009 11:57 AM

Hi,
Use this also
SAP Note- 0000927215 Contract is not proposed as valid source of supply
Regards,
Sachin

RZ20 Monitoring of MaxDB

Hi,
On some of my newer system eg Solution Manager with SPS 15 I have the ability to monitor MaxDB in RZ20 for various things but in our "not yet updated" systems running ERP 6.0 SPS 10 I only get an option under Database for "SAP DB" which is inactive. It seems that these slightly older systems have a problem with the method definition used in data collection for MaxDB. I have tried to assign the methods the same as they are assigned to my updated Solution Manager system but it doesn't allow me to assign a method for data collection(only analyze) for some reason.
What requirements are there to get MaxDB monitoring correctly in RZ20 ?
Many thanks.
Nelis
ps. Monitoring is turned on in DB59 and connection made!
More Info: Running MaxDB(64bit) 7.6.03.014 in systems not working(Soon to be upgraded to 7.6.04.008)

Hello Nelis,
-> "What requirements are there to get MaxDB monitoring correctly in RZ20 ?"
     Please provide additional information from but our "not yet updated" systems running ERP 6.0 SPS 10::
       What is the SAP Basis SP on those systems?
       What is the MAXDB version on those systems?
SAP Note 545030 contains the prerequisites that need to be met so that you can use the MaxDB or liveCache monitor.
    Please review the SAP notes to find the solution on the reported issue::
            1050153     DB Analyzer and alert monitor startup after system launch
              990602     FAQ: CCMS for MaxDB/SAP liveCache technology
            1128989     "command timeout exceeded" with DBMRFC session mode
-> As SAP customer you have the option to create the OSS ticket, therefore we could
    logon to your system via OSS and take a look closer on the reported issue.
    Component ::
    BC-DB-SDB-CCM:        For problems with the MaxDB transactions
                                            DB12,DB13,DB50 ,DB59 RZ20,RZ21,ST04
-> "More Info: Running MaxDB(64bit) 7.6.03.014 in systems not working(Soon to be upgraded to 7.6.04.008)"
     Why running MaxDB(64bit) 7.6.03.014 in systems not working? What is not working?
     What the problems/database errors did you get to run the database version 7.6.03.014 in your systems?
Thank you and best regards, Natalia Khlopina

Installation problem CCM 4.0(1)

I install ccm 4.0(1) on my pc with wins 2000 server plus sql 2000sp3a while install I got error about RPC connection fail duration installation cisco directory.
please help and ref
Thank in advance

This problem is addressed in Cisco bug ID CSCed88931

Windows 8.1, Military CAC, Dual Persona PIV Cert, DEE-mail Access Problem

I am not able to access the military e-mail system, Defense Enterprise E-mail (DEE) from my new computer. My new computer is a Dell Venue 11 Pro Tablet that runs Windows 8.1 with the latest updates. In addition, hardware wise,
I have a CAC (Common Access Card) reader, model SCR3310. Using my old personal computer and several other government computers, I am able to access DEE with no problems because they are all able to access the PIV (Personal Identity Verification)
Certificate on my CAC card.
I am not able to access DEE. The reason is that I cannot see the fourth PIV certificate on the CAC card, even though it is there. This certificate is called a PIV certificate. The PIV certificate on the CAC has been properly activated.
Using other computers that have a middleware software called ActivClient loaded, I am able to log onto DEE without any problems. However, I have read that Windows 8.1 does not need ActivClient in order to access the CAC.
On my old computer, I am able to view all four certificates using ActivClient. And I am able to publish all four certs so that Internet Explorer 11 can have access to them when I log onto DEE and other websites.
On my new computer, I am able to view three of the four certificates using certmgr.msc. I run this by right mouse clicking on the Start button and then clicking on either Search or Run and then typing in certmgr.msc.
Within the Cert Manager window, the left pane shows, "Certificates - Curent User" > "Personal" > "Certificates". When the Certificates folder is clicked, only three certificates are shown. That's the problem.
How do I get the fourth certificate to show up? The PIV cert is definitely on the CAC. The PIV cert has been properly activated on the DMDC website and shows up on all of the computers that use ActivClient.
I have also tried installing ActivClient 7.0.2.XXX with the latest hotfix and made all other adjustments specified on MilitaryCAC.com (which usually works and worked on a very similar ASUS T-100 machine). When I install ActivClient, I can "see"
all four certs and I can log on through web.mail.mil, get the cert prompt, select PIV, enter PIN, and move on to the warning banner, and then the expected redirect to the OWA link...but when I click on the final link I get the IE error 500.
I have tried reinstalling windows, Chrome and Firefox and I have even purchased the Windows 8.1 Pro upgrade with the same results. Any help would be greatly appreciated!

RESOLVED:
For those experiencing this issue, after a call to the Army Enterprise Help Desk, I tried using the DOD Cross Cert Removal Tool and after reboot that fixed my issue.
The newer DOD CA Root Cert installation package supposedly has the Cross Cert Removal Tool packaged together, however this additional step resolved my error 500 issue.

CCM CAC Problem

Similar Messages

Maybe you are looking for