CCM catalog upload monitoring via XI

Hi ,
we are running SRM 4.0 with CCM 2.0 and we upload supplier catalogs via XI into our CCM (BMEcat format).
In most of the cases the upload works well. But sometimes the content doesn't reach the catalog. The problem is, that the log file (access via the CCM admin page) doesn't tell me what is wrong. Also in SLG1 I get no sufficient information about the problem. I assume that the file got stuck into the XI. Unfortunately I am no XI expert. How can I monitor my catalog uploads in the XI environment? I heard about TA SXMB_MONI. Maybe someone can give me a hint how I can see if there is something wrong on the XI site and how I can re-start a stuck catalog upload on the XI.
Best regards
Tom

Thomas,
You can execute the transaction SXI_MONITOR and look at the errored messages, if you are comfortable with the SAP GUI. Else, you will have look at the run time workbench and look at the error messages.
In both cases there will be reasons give as to why the message has been errored out. And you will also find the options to resend the same message.
Regards,
Ravi
Note : Please reward the helpful posts.

Similar Messages

CCM catalog upload monitoring

Hi SRM experts,
we are running SRM 4.0 with CCM 2.0 and we upload supplier catalogs via XI into our CCM (BMEcat format).
In most of the cases the upload works well. But sometimes the content doesn't reach the catalog. The problem is, that the log file (access via the CCM admin page) doesn't tell me what is wrong. I assume that the file got stuck into the XI, but when I check TA XMB_MONI on the XI site I also do not get sufficient information.
How do you monitor you CCM uploads? Are there some special transactions on the XI or SRM site.
Best regards
Tom

Hi thomas,
You can use : SLG1 = log in CCM admin
ST22 if you get a dump or SM21 (sometimes you get information when receiver isn't correctly customize)
in XI and CCM you can check SXMB_MONI and see log detail in xml log (i can understand that it isn't easy to understand...).
and su53 to check if SAP_XI_APPL_SERV_USER role need one more time a full comparison...
regards,
Bertrand

How to Debug CCM Catalog Upload Process

SRM Gurus,
Can anyone please outline the steps to debug the uploading process of the .CSV file in CCM 2.0?
The upload of my supplier catalog terminated due to an error and I'd like to debug to see what's causing the error.
Any tips would be greatly appreciated.
SN

Hi
Check for logs created in SLG1 Transaction to know, the causes of dump, if any.
Also see reports /CCM/INITALLISE_CME , SRM_EXTRACTED_CTLG.
<b>Please go through the following SAP OSS Notes below -></b>
Note 1043305 SRM_EXTRACTED_CTLG upload terminates with error.
Note 950500 Source Cat.of enriched cat.item missing
Note 858615 Lock problem for many products
Note 852622 "Category not found" termination at publication
Note 844547 Impossible to create characteristics using upload
Note 747454 Data enhancement: Error characteristic-category-relationship
Note 1024002 - Error introduced by CCM SP07
<b>Related links -></b>
Re: Unable to Edit the Charateristic?
Re: problem after uploading user defined characterstic schema in product catalo
Re: CCM 2.0
Re: Unable to run the report /CCM/initialise_cme
Do let me know.
Regards
- Atul

CCM 2.0 automatic catalog upload

Hi, experts
We are using SRM 7.0 and CCM 2.0, we would like to know if there is a FM to make the catalogs upload automatic, or if is possible to develop it, which way we'd proceed.
Thanks in advanced.

Hi,
Please check this old thread.
CCM automatic upload of CSV files
You can also generate XML and path CCM upload interface.
I don't have access to old CCM landscape and not sure the interface name.
Please note CCM support will be expired. It would be nice if you develop a program which can be used for SRM-MDM Catalog.
Regards,
Masa

CCM Catalog Mass upload problem

Dear Experts,
Could you please help me to find an answer to the below issue?
We are doing a mass catalog upload in CCM 2.0 => we are uploading our CSV file as follows:
Supplier ID A => Supplier name A => Item details A
Supplier ID B => Supplier name B => Item details B
etc.
Usually, I give the first Supplier ID when creating the Supplier catalog.
The upload process is working fine, BUT...
When the catalog has been uploaded, from the Procurement Catalog side there is only the first "Supplier ID A" what's beeing uploaded to all of the items instead of all the other respective Supplier IDs.
Therefore we have to change the rest of the Supplier IDs by mass changing the respective Proc Cat.
Do you know how we could keep all the other Supplier IDs?
Thanks a lot - imre
Edited by: Imre Matyas on Feb 8, 2010 11:09 AM

Hi,
In that case my solution will help.
Here is sample schema with custom characteristics. Please look at Z_SUPPLIER_ID and Z_SUPPLIER_NAME.
SAP CATALOG CSV 2.0 <;>
Defaults;EN
Model
Catalog;Master;;Master Catalog
Characteristic;Z_ACTION;/CCM/NAME;false;Action
Characteristic;/CCM/PRODUCT_ID;/CCM/ID;false;Part Number
Characteristic;/CCM/SHORT_DESCRIPTION;/CCM/DESCRIPTION;false;Description
Characteristic;Z_MATERIAL_TYPE;/CCM/ID;false;Material Type
Characteristic;/CCM/MINIMUM_QUANTITY;/CCM/MINIMUM_QUANTITY;false;Order Unit
Characteristic;Z_CONTENT;/CCM/MINIMUM_QUANTITY;false;Content
Characteristic;/CCM/LEAD_TIME;/CCM/LEAD_TIME;false;Lead Time
Characteristic;Z_SUPPLIER_ID;/CCM/ID;false;Supplier Number
Characteristic;Z_SUPPLIER_NAME;/CCM/NAME;false;Sup Name
Characteristic;Z_P_GROUP;/CCM/ID;false;Purchasing Group
Characteristic;Z_P_ORG;/CCM/ID;false;Purchasing Org
Characteristic;/CCM/CONTRACT_ID;/CCM/ID;false;Contract Number
Characteristic;/CCM/CONTRACT_ITEM_ID;/CCM/ID;false;Contract Item
Characteristic;/CCM/PRODUCT_GROUP;/CCM/ID;false;Product Category
Characteristic;/CCM/PRICE;/CCM/PRICE;true;Price
Characteristic;Z_DATE;DATE;false;Date
Characteristic;Z_UPDATE_BY;/CCM/ID;false;Updated By
Characteristic;/CCM/LONG_DESCRIPTION;/CCM/LONG_DESCRIPTION;false;Long Description
Characteristic;/CCM/PICTURE;/CCM/ATTACHMENT;false;Picture
Characteristic;Z_BUYER;/CCM/ID;false;Buyer
Characteristic;Z_BUYER_CONTACT;/CCM/ID;false;Buyer Contact Number
Schema;Master;Z_ACTION;Z_MATERIAL_TYPE;Z_CONTENT;Z_SUPPLIER_ID;Z_SUPPLIER_NAME;Z_P_GROUP;Z_P_ORG;Z_DATE;Z_UPDATE_BY;Z_BUYER;Z_BUYER_CONTACT;Master Schema
Regards,
Masa

Material/service master catalog upload (ECC-CCM)

SRM have 2 possible scenarios to upload the material master data to CCM:
1- Upload material master data from ECC to SRM and, after, from SRM to CCM.
2- Upload material master data directly from ECC to SRM.
Does anybody know the name of the transaction or report in ECC to upload the material/service master catalog directly to CCM?
Best regards,
Cristiano Soares

Hi All-
I have about 3 tricky questions concerning CCM-ECC Integration
1.) Does anybody have any idea on how to upload Material and Service master from ECC 6.0 directly into the CCM 2.0 system. Is there any standard program like we have in SRM called as BBP_CCM_TRANSFER_CATALOG. I
2.) Also are there any complications or is it possble to integrate CCM 2.0 directly from ME51n? I am aware that PM and PS out-of-the-box can be directly integrated to CCM. Is there a similar way to achieve this functionality. If yes can anybody give me some pointers on this.
3.) Are there any complications involved with uploading service masters and interfacing CCM to EBP or ECC and directly using the service master from CCM to create a Shopping cart (CCM-EBP) or a purchase requisition (CCM-ECC).
I hope some one can throw some light on these questions.
Suitable points will be rewarded for helpfull answers !!
Thanks,
Sundeep

How do I get a reliable upload monitor?

Hi,
I'm a freelance television editor for several networks and corporate clients.
I regularly upload .wmv and Quicktime movies of my work to my iDisk for my clients to review.
Question: Is there any reliable upload monitor that shows me the progress AS it is happening? Before you answer that, please read on. There are two things I've tried that have not worked.
THE PROGRESS BAR is just not doing the trick. Unless I miss my guess, Apple really dropped the bar on this one. When I upload to my iDisk via the finder, the progress bar zooms all the way through to the end in five seconds or less - THEN it holds in that spinning barbershop pole for the rest of the upload. I'm sorry, but that is simply NOT a reliable way to tell how far your upload has gone, how far you have to go, whether or not your network connection has dropped, etc. Is there something in my settings somewhere to control how this progress bar acts?
THE ACTIVITY MONITOR has a Network Pane ... and there is an indication there of "Data Sent". However ... data sent SINCE WHEN? Midnight? The last hour? This last download? I have no idea, and I can't find anything in any manual or help document that explains "data sent" more fully.
Keep in mind, I rarely have problems uploading. It's very reliable, and eventually the progress bar goes away, indicating that the upload is complete.
However, when a client is on the phone wondering when the upload will be done so they can see it --- I have nothing to tell them! I don't know how far the upload's gone, when it will be done - my Mac is simply not providing me that information.
Does anyone know of a setting to change in my Mac to get this information when I upload? Or at te very least, a more reliable upload monitor that can give me an accurate progress report?
Thanks in advance for any help you can give.

Klaus!
You get the bonus points without knowing it.
I know you said you missed the "iDisk" in my original post --- but based on what you came up with, I did some digging and it solved my problem. Incredibly easy, too.
Solution: Transmit DOES integrate seamless with iDisk. Here's how.
Download and install Transmit.
The go into your System preferences, go to .Mac, then the Sync pane. Click the "Synchronize with .Mac button.
Scroll down. You'll see the option to synchronize your .Mac with Transmit favorites.
Click that button and then "Synchronize Now".
That's it. No need to enter confusing addresses or anything. Your iDisk now appears in the Favorites bar of Transmit.
From there it's just drag and drop into the Transmit window ... and my original progress monitor problem is solved!
Thank you so very much, Klaus! This is a problem that has frustrated me for more than a year!

How to change an existing line item in CCM catalog using CSV file?

Dear All,
We are using SRM5.0 and CCM 2.0
We have uploaded the material and service master to CCM as supplier catalog from R/3.
The initial Upload was doen successfully.
My query is how to reflect the delta changes in CCM happening in R/3?
If I can generate a CSV file with all those items wich has been changed (Changes can be in description, Plant, status etc) and upload the same file in CCM, will it update the existing line in CCM or create a new line item?
How do i update an existing line item in CCM catalog using a CSV file?
Thanks
Abhishek

Hi Atul,
I am using CCM 2.0 and SRM 5.0 (EBP5.5).
We are not using XI, so i guess we cant use the program "/ccm/file_upload".
we have migrated the product master data from R/3.
We have developed a report which takes product category as input and gives out flat file in csv format containg all the items in that prod category.
Then we upload the file in CCM by logging thro the brpwser.
Similarly, i can develop another program which will give me a CSV file foll all those items changed in R/3 in a day.
Then we can upload that file in CCM.
But i have doubt if it will update the existing items in catalog.
Hope I could make myself clear.
Thanks
Abhishek

Is it possible to add new characteristic to CCM catalog SRM_EXTRACTED_CTLG?

Hi Experts,
Any idea if I can transfer new extra data from the SRM product master into CCM? (via program BBP_CCM_TRANSFER_CATALOG)
So I want to add a new characteristic (e.g. ZVALUEPRICE) to the catalog SRM_EXTRACTED_CTLG and fill it with the valuation price.
According to BAdI BBP_CCM_CHAR_MAINT it should be possible:
"When you transfer SRM product data to SAP Catalog Content Management (SAP CCM), this BAdI enables you to also transfer additional item characteristics contained in the product master data in SAP Enterprise Buyer. These characteristics are then available in the SRM product catalog in SAP CCM."
But I'm getting errors like: "Value assigned to ZVALPRICE is not valid-locale NL/ is not possible".
Any idea how I should set this up? Or if I'm doing anything wrong?
I know the valuation price is also filled in /CCM/PRICE, but I want to map the content into a different field. And change the mapping of original created field is not possible.
Thanks in advance.
Kind regards,
Marius Hartman
Edited by: Marius Hartman on Mar 4, 2009 1:39 PM

Hi All,
Turns out that when we don't add a language code to the code, the problem is resolved. So currently I'm able to add the information to a new field in CCM catalog SRM_EXTRACTED_CTLG
Marius Hartman

Catalog upload

I all,
I'm managing CCM Catalog. I wanted to add a new characteristic into a catalog...
I created a Purchase Catalog and uploaded the following file csv:
SAP CATALOG CSV 2.0 <;> full
Defaults     IT
Model
#Catalogo     Id Catalogo     Codice Tipo Catalogo 1Acquisti 2Fornitore     Descrizione
Catalog     TERNA S.P.A.           Catalogo Terna S.p.A.
#CHARACTERISTIC     Id Caratteristica     Tipo Dato     Multi-valore     Descrizione Caratteristica
CHARACTERISTIC     Z_VAL_MIN     price_type     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/PRODUCT_ID     /CCM/ID     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/SHORT_DESCRIPTION     /CCM/DESCRIPTION     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/PRICE     /CCM/PRICE     TRUE     Valore Minimo
CHARACTERISTIC     /CCM/HAS_DAILY_PRICE     /CCM/FLAG     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/PRODUCT_GROUP     /CCM/ID     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/BASE_UOM     /CCM/UNIT_CODE     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/ORDER_UNIT     /CCM/UNIT_CODE     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/PRICE_BASIS_QUANTITY     /CCM/PRICE_BASIS_QUANTITY     FALSE     Valore Minimo
CHARACTERISTIC     Z_VAL_MIN     /CCM/PRICE     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/LEAD_TIME     /CCM/LEAD_TIME     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/SUPPLIER_ID     /CCM/ID     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/SUPPLIER_NAME     /CCM/NAME     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/CONTRACT_ID     /CCM/ID     FALSE     Valore Minimo
CHARACTERISTIC     /CCM/CONTRACT_ITEM_ID     /CCM/ID     FALSE     Valore Minimo
#SCHEMA     SCHEMA ID     Characteristic     DESCRIPTION TEXT
SCHEMA     GRUPPI MERCI     Z_VAL_MIN     GRUPPI MERCI
CATEGORY     A001001               CANCELLERIA
CATEGORY     201A               MORSETTI E VARIE AT
CATEGORY     301A               ISOLATORI BT VETRO
CATEGORY     204A               MORSETTIERE COMPONIB
CATEGORY     A101               TRASPORTO
....When I cretated the supplier catalog and uploded the following csv file...there is a mistake...
SAP CATALOG CSV 2.0 <;> full
Defaults     IT
CONTENT
#Item Valuation     Category ID     CHARACTERISTIC 1     CHARACTERISTIC 2     CHARACTERISTIC 3     CHARACTERISTIC 4     CHARACTERISTIC 5     CHARACTERISTIC 6     CHARACTERISTIC 7     CHARACTERISTIC 8     CHARACTERISTIC 9     CHARACTERISTIC 10     CHARACTERISTIC 11     CHARACTERISTIC 12     CHARACTERISTIC 13     CHARACTERISTIC 14     CHARACTERISTIC 15     CHARACTERISTIC 16     CHARACTERISTIC 17
Item Valuation     Category ID     /CCM/PRODUCT_ID     /CCM/SHORT_DESCRIPTION     /ccm/price[1]#/ccm/amount     /ccm/price[1]#/ccm/currency_code     /CCM/HAS_DAILY_PRICE     /CCM/PRODUCT_GROUP     /CCM/BASE_UOM     /CCM/ORDER_UNIT     /CCM/PRICE_BASIS_QUANTITY#/CCM/QUANTITY_VALUE     /CCM/PRICE_BASIS_QUANTITY#/CCM/UNIT_CODE     Z_VAL_MIN#/ccm/amount     Z_VAL_MIN]#/ccm/currency_code     /CCM/LEAD_TIME     /CCM/SUPPLIER_ID     /CCM/SUPPLIER_NAME     /CCM/CONTRACT_ID     /CCM/CONTRACT_ITEM_ID
1     A001001     27     Stampante Da Tavolo     30     EUR     FALSE     CANCELLERIA     AE     AE     1     AE     10     EUR     30     408     NOVA TIPOROM S.r.l     4400000113     1
...Does someone can explai me what is the problem...is it related to my new field(Z_VAL_MIN)...this field must be created also in Supplier catalog?...
Thank very much, Best Regards,
Maria

Elements 11 is installed on the computer with about 9000 images in monthly files cataloged in 30 odd categories etc. My only thought at the moment is that if I load in each months file the key words etc will probably be detected if not the full 3d structure.
John

CCMS - File Content Monitoring

Hi @ll,
I stuck during the creation of a file monitoring via CCMS - Monitoring the file content
I visited the following help.sap.com site http://help.sap.com/SAPHELP_NW04S/helpdata/en/47/4daa79abc16d18e10000000a421138/content.htm ...and many more - but it doesn't work
history
1) under usr\sap\<SID>\DVEBMGS00\log\logmon I've created a file template which contains
   LOGFILE_TEMPLATE
   DIRECTORY="G:\temp\"
   FILENAME="test.log"
   MTE_CLASS="CcmsFileTest"
   PATTERN_0="Text1"
   PATTERN_1="Text2"
   VALUE_0=RED
2) Update of file sapccmsr.ini
Format of entries for logfile monitoring:
LogFile <full path of logfile template>
F:\usr\sap\prfclog\logmon\<SID>_ABAP_00_Test_logmon.ini
3) Restart of sapccm4x service
... after that I should be able to get information about the file => RZ20 => "SAP CCMS Monitors for Optional Components" => "Logfile Monitoring" => "Logfile Monitoring" => "Logfile Monitoring" => Files_of_SAPSERVER_SID_00 ...
but the monitored file does not exists?!
So, whats wrong?
I'm searching for hours but I can't find a solution for my problem
best regards

to get information about a file you have to install the ccmsr agent.

What is the diff bet CCM catalog and MDM catalog?

Hi Friends
What is the diff bet CCM catalog and MDM catalog?
Thanks & Regards
Kanni

Hello,
CCM & SRM-MDM are SAP Catalog Content Management solutions.
In basic terms, MDM is latest solution & will be replacing CCM. All new features like service hierarchies are included in MDM 3.0.
CCM: upload, manage, and search in procurement catalogs.
http://help.sap.com/saphelp_ccm20/helpdata/en/index.htm
MDM: Search, compare, and procure products from suppliers.
It provides:
Catalog content management functions, such as the import of catalog structures or data, the transfer of catalog items to a procurement application, and search functions
Procurement catalogs
Supplier catalogs in a Web-based environment
The SRM-MDM Catalog is based on functions provided by SAP NetWeaver Master Data Management (SAP NetWeaver MDM) and bundles together in one specific application those SAP NetWeaver MDM functions required for catalog content management.
http://help.sap.com/saphelp_srm70/helpdata/en/45/ddd04f8c6e2e97e10000000a155369/frameset.htm
Hope this helps.
Thanks
Ashutosh

Problem with T61 and DVI External Monitor (via Advanced Mini-Dock)

Ever since I upgraded to Vista SP1 on my ThinkPad T61 (with an Intel integrated 965 series graphics card), I've been having problems when I try to use an external monitor via the DVI port in my Advanced Mini-dock. I'm curious if other people have experienced this problem.
The problems surfaces when I first boot up, or sometimes after my ThinkPad has been running for awhile (particularly when I do something graphics related, such as right-clicking to open display properties). The picture starts to flicker (or disappear and reappear, like the screen does when changing graphics resolutions). I also hear the "ba-bum" sound that you hear when disconnecting a piece of hardware, followed by the "bum-ba" reconnection sound - these two sounds happen repeatedly (sometimes as fast as once per second). If I don't do anything, sometimes I'll get a bluescreen.
Not long ago, I found a fix of sorts: to stop the flickering/reconnecting, I just open Task Manager and stop the process called "igfxpers" (an Intel driver problem). The problem always disappears after I do this, although I have to remember to do it every time I reboot or else the problem comes back. So it's not an ideal fix.
This problem doesn't happen when I connect an external monitor using the analog VGA port, or when I'm just using the notebook LCD. It's limited to just the DVI connection. I've tried two different digital monitors (one LG, the other BenQ) as well as two DVI cables - the problem is still the same. So it seems like a driver problem of some sort - unfortunately, the Intel drivers haven't been updated since last February.
I should also note that I've tried reinstalling my OS two or three times, and the problem always comes back. Has anyone else had this problem, and is a fix on the way?

Error Message:
Input signal out of range. Translation:
You will see this on an otherwise blank screen. Assuming that the data cable is plugged in correctly, the video card is feeding the monitor a signal stream in excess of what the monitor can accommodate. The two main causes for this are that the user has set either the resolution or the vertical frequency rate too high. For example, you might set a new graphics card to display at 1,280 x 1,024, but if the monitor is only capable of 1,024 x 768 resolution, you’ll get a Sync Out of Range error. This is especially common in 14-inch monitors.
Solution:
Because you obviously can’t make settings changes from within regular Windows, you’ll need to reboot into Windows Safe Mode. When you restart the system, there is a point during boot up when the system switches from reporting diagnostics and detected components to loading Windows. This point is usually accompanied by a beep and the screen going black. Just before this point, you want to start repeatedly pressing the F8 key. This should bring up a menu of Windows boot options. The one you want to pick is Safe Mode.
From Safe Mode right-click the Desktop and select Properties. Go to the Settings tab and use the slider to drop your resolution a notch or two. Reboot and let Windows try to go into Normal mode. If this still doesn’t work, go back into Safe Mode and get to the Settings tab of Display Properties. Click the Advanced button, go to the Monitor tab, and check your refresh rate. The lowest advisable rate is usually 60Hz, although this works better for LCDs (liquid-crystal displays) than CRTs (cathode ray tubes). Apply the change and reboot.

MacBook Air no longer connecting to monitor via HDMI after recent update.

Hi all,
My MacBook air typically has no issues connecting to my external ASUS monitor via Thunderbol-HDMI port. However, after the recent Mavericks OSX update that was pushed a couple days ago, my monitor says that there is no signal. My MacBook air screen flickers slightly once connected (typical behavior, as it begins to mirror the screen on a scaled resolution shortly there after) but then nothing happens.
How can I fix this?
Thank you!

Welcome to Apple Discussions
Try System Preferences->Energy Saver:Automatic graphics switching (Deselect the checkbox).
If that doesn't work you might try changing the resolution and refresh rate for the monitor in System Preferences->Displays, or downloading an app called SwitchResX (shareware) and lowered the resolution just slightly .
One other solution if possible - restore to time before update from backup.
Added restore from backup advice
Message was edited by: themachead

Is it possible to add a second monitor via mac mini with iMac

Hi
is it possible to add a second monitor via mac mini with iMac
or is there another solution?
all i want to know is if i can run a second monitor or link a mac mini for more speed like i heard you can with the G5 Towers.

The iMac will allow you to connect a second monitor but that monitor will show the same thing as the iMac's built-in screen.
You can network a Mac mini and iMac via Ethernet or Firewire.
Software load sharing like Xgrid can allow you to share work between the Macs.

CCM catalog upload monitoring via XI

Similar Messages

Maybe you are looking for