CCM category links in SRM

I have published items from CCM into SRM and they have populated new catalog categories in the schema. So, the number of links displayed to the end user has gone up. Now, I would like to remove the items and republish. However, after the items are gone from the categories, the links are still there. Is there a CCM cleanup process to remove the empty catalog categories from SRM?

Greg: we're experiencing the same issue. You can try re-publishing using the "Entire Catalog" method, instead of "Publish Changes", and see if it cures it.
As a side note, in the search engine, your users can go into the index display of categories. In this view, only populated categories are shown, in contrast to the hierarchical view.
Cheers,
Serguei

Similar Messages

  • How to Change text of link in SRM

    Hi All,
    How to Change text of link in SRM . The Link is in leftside of the screen in webportal.
    I needs to change the text of link ' Shop' , 'Check Status'  and 'Confirm Goods / Services.
    Kindly helpout me.

    Hi Rob,
    Thanks a lot for reply.
    You are right i am suppose to change in BBPGLOBAL.
    But i am not getting where should i change.I am unable to find the parameter in BPGLOBAL.
    Kindly advise me.
    Regards,
    Vasu

  • CCM 2.0 to SRM MDM 3.0 Migration

    Hi,
    Currently we are using CCM 2.0 in SRM 5.0.
    Now we are moving to SRM 7.0 along with SRM MDM 3.0.
    IN CCM 2.0 , we have country wise catalogs.
    SO we have aorund 30 catalogs for each country.
    US user can see only US related catalogs.
    Can we acheive same thing in SRM MDM 3.0 ? If so, please explain.
    Thanks in advance.
    Regards
    Venkatesh P

    Hi Venkatesh.
    Yes. you can achieve this through various channels in SRM-MDM Catalog 3.0.
    1. Named Search: MDM provides a feature called named search which filters the records based on the specific search criteria.
    In your case you can create a anamed search in the datamanager for each country and in the webservice definition you can pass the named search so that once the catalog is launched it will display the items corresponding to the country
    2. Additional Paramter: Let say you have the country names as a lookup in the repository. you can pass the country name as a additional parameter to the webservice definition to launch catalog for specific records.
    Refer Note: 1389625. Also refer thread: SRM MDM Catalog 3.0 --- UI Search --- Filters
    Best Regards
    Bala

  • Upgrade from CCM 1.0 to SRM-MDM 3.0

    At present  we are using CCM 1.0  with  SRM 4.0 and in the process of upgrading it to SRM-MDM 3.0  catalogs. All the internal catalogs needs to upgraded to MDM 3.0 from CCM 1.0.
    Could somebody explain the steps to follow to achieve this.
    Thanks for your help.

    Hi,
    It is not upgrading the system. It is new installation and contents migration.
    1. install SRM-MDM Catalog
    2. import contents
    3. define views (namedsearch/mask in MDM)
    Please check the SRM-MDM Catalog installation guide.
    http://service.sap.com/srm-inst -> SRM Server 7.0
    Regards,
    Masa

  • DMS Object Link for SRM

    Dear All,
    Can you please provide me the object link for SRM( Inbound Delivery).
    Our team requirenment we should need to integrate with SRM through DMS (object link)
    So provide me the solution?
    Thanks
    Edited by: RS on Aug 26, 2010 1:14 PM

    Hi RS,
    Kindly follow following steps. Add the new object in DMS object link and DMS screen on new object screen with help of Abap'r.
    This can be achived with help of Abap'r and following steps:
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
    Prerequisites
    In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
    Process
    1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    Regards,
    Ravindra

  • Link between SRM and ECC invoice

    Dear gurus,
    I need to find the link between SRM and ECC invoice number, can you please provide me the related tables?
    Thank you in advance for your collaboration.
    Regards,
    Fuffo

    i don't have access to the system now but i guess will be table BBP_PDBEI.
    or you can go tcode BBP_PD, check in item level.
    cheers.

  • ESW: No link for SRM / EU5 in the  ES Workplace Homepage?

    Hello ,
    I have registered into ES Worplace some time back and accesssed the SRM 7.0 then.
    I have re-registered today and find that access information to EU5 is not provided and also the access link to SRM backend is not in home page.
    Is the SRM access from ES workplace removed? Kindly advice.
    Regards
    Prasuna

    Hi,
    > So if I have imported the implemention into the ERP, do I need to map those implementations to the service definitions in ESR
    Not really, ESR is just definition and if your services are available in ERP then it is enough to use them.
    >Could you recommend me a way to consume/test the service?
    You can goto transaction "SPROXY" on ERP and search for your service then execute it from there, read documentation for field information and type of data supplied, as it could be very frustating to understand GDT.
    >in a way of proxy and PI combination
    If you are on ABAP system then you can call this service internally as you can call any class. See the underlying implementation class of this service in SPROXY.
    PI is useful for A2A communication, if you have third party program and want to communicate with ERP services (sepcially async) then you can create mappings in PI and allow thirdparty to communicate with ERP.
    Typical usage scenario is: Legacy->PI->Proxy(ERP)
    PI will play role of translator (if your legacy application send message in different style) and postman (to transfer message from one location to another).
    Async services are useful when there is bulk transaction and NO realtime response required.
    Regards,
    Gourav.

  • How to disable category link in content area

    Hi,
    I have a lots of categories in a content area. As u all know, a link appears for all categories in the category header.
    Clicking that will take you to that particular category.
    I do not want to have that link. I have tried what was mentioned in earlier question to disable portlet header link.
    <a font color=white></font>
    Bue that's not working for category links.
    Please help.
    Murthy

    Hi,
    http://help.sap.com/saphelp_nw70/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm you find the relevant guidelines.
    You can filter the PCD object setting the Search Layout Set of your Searc Iview.
    In System Admin > System Configuration > Content Management > User Interface > Settings > Layout Set and duplicate the "SearchResultLayoutSet" layout set.
    Then you have to duplicate its Collection Renderer "StandardSearchResultRenderer".
    In its property "Resource Types to be Filtered" set as value "-http://sap.com/xmlns/pcd/app/iview".
    Then assign the new Collection Renderer to the new Layout Set and that's it!
    Now if yuor Search Iview uses this new Layout Set, when you search a PCD object the iviews will not be shown!
    (or)
    In the entry "Predefined Properties" of the search options set, you will need to enter "resourcetype(value=http://sap.com/xmlns/pcd/app/page/default)" if you want the search to be limited to resources defined as pages. Leave out /default if you dont want the end user to be able to change the filter.
    If you want the parameter reflected in the URL, you can find information about how to do it here: /message/280371#280371 [original link is broken]
    Check and try either ways.
    Regards,
    Ponneswari A.

  • How to disable Help link in SRM

    Does anyone know how to disable the Help link in SRM?
    We are displaying SRM transactions through the SAP Portal, and have decided to use the Portal's help links for context-sensitive help.  Therefore, the Help link in SRM is redundant.

    Hi,
    You can either remove the HELP link completely by modifying the template as suggested by Andy OR you can modify the  template in the service BBPHELP in SE80.
    Go to BBPHELP service ,template BBPHELP_1000.
    Comment the foll line :
    <!-- var helpURL="`FRONTEND_URL`"; -->
    BR,
    Disha.
    Pls  reward points for useful answers.

  • Product Category Error in SRM

    Hello Gurus,
    I tried to replicate Material Group from ECC to SRM using R3AS tcode.
    When I checked the status in R3AM1 it was showing running status but by mistake I clicked on cancel button and the status is "abort"
    Even after setting filter in Product category I tried to load but the system is throwing same error message as "abort"
    Please help me how to do fresh load.
    Thanks,
    Vish

    Hi Vishvas
    I assume that you have correctly maintained the relationship of BP and org unit in PPOSA_BBP ?
    You can see that they are linked in the org structure .
    Follow these and see if it helps ?
    1. Now try to click on repair
    2. Fill the email ID here ..
    3. Click on relationship and then display there also edit the Email Address ..
    Regards
    Vinita

  • Confirmation Link in SRM to Goods Recipt Link in R/3

    Hi All-
    We are on SRM 5.0, Classic scenario. Currently, we have problems with the Confirmation extract from SRM, so we want to implement a change, where we only use the GR Extract from R/3, but we still want to include the SRM Confirmation Number.  In order to do this, we have two approaches we can take:
    1) Do a call from R/3 to SRM to get it (but we need to know how they are linked, and I am told that the link is from SRM to R/3)
    2) Change the Conf to R/3 process to pass the Conf number from SRM to R/3
    <b>Question:
    1.) How are the confirmation number in SRM and Goods Receipt number in R/3 linked?
    2.) How does the information of a Goods receipt in R/3 brought back to SRM? (I know the BBP_GET_STATUS_2 Job does it, but i am trying to understand what tables this complete link of S/C->PR->PO->Conf->GR->INv are stored in?</b>
    Any ideas would be appreciated !
    Sundeep

    Hi
    1) Please see the following SAP OSS Notes ...
    Note 720819
    Note 309734
    Also Check SRM tables BBP_PDBEH (header) and BBP_PD_BEI (item). Also go through the golden transaction in SRM - BBP_PD.
    You can find these values using transaction BBP_PD for object type BUS2203 (confirmations).
    2) SRM related tables involved are ... as follows..
    Using SRM function modules -
    BBP_PD_CONF_GETDETAIL
    BBP_PD_CONF_GETLIST
    <b>Other related links to go through as well -></b>
    Comparison of R/3 purchasing and SRM
    Re: Confirmation-Related Invoice Verification
    Re: Integration Between SRM and R/3 MM - Tables used for PO's and Requisitions
    Re: step by step process to transfer materials from R/3 to SRM
    Integration between SRM-Confirmation and MM-FI Closing in R/3
    Re: Link between in SRM and R3
    Do let me know..
    Regards
    - Atul

  • Time out calling CCM 2.0 from SRM

    Hi All,
    I have a CCM 2.0 (CSE & CAT) system on the same box as SRM 5.0. I've set up the integrated call structure and entered a user in the SICF service but when I try to access the catalog via SRM, I'm getting a message saying "Your session has timed out - call up SAP Catalog Search Engine again in SRM."
    Does anyone have any ideas as to why I may be getting this?
    Thanks,
    Paula.

    Hi Paula
    We had faced the same problem.
    Actually when we click on the Catalog URL and on next screen it gave an error "Error Time out Session ......"
    The message was same as you are receivng.
    Solution -
    1 We had gone to Internet Explorer >tools> Internet  options --> Security tab
    Click on the custom level button choose the option "Low"
    for Reset  button
    2 Click on trusted sites (In security tab)
    Click on the sites button add the URL (Domain name and the server name )Add that as a trusted site.
    3 Go to Advance tab and click on restore defaults and click on apply button
    After this check the URL for Catalog in SRM web browser the error should disappear,
    Rgards,
    Nimish Sheth

  • DMS object links to SRM

    Hi,
    You can used this method to create object links between DMS different ECC objects (See below) Is there anybody who can tell me if you can use the same method to create object links between DMS and SRM objects? It should be very helpful for me.
    Thanks in advance
    //Håkan
    Adding Other Objects
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard
    SAP System.
    Prerequisites
    In Customizing for the Do
    cument Management ,SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
    Process
    Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    Create the function moduleOBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see:
    Object Links).

    Hey Manghes,
    The business scenarie is that poeple working in only SRM not in ECC system at all and they want easyly reach or link some document in DMS to SRM objects by using object links.
    BR
    //Håkan

  • Link to SRM 550 Contract from ABAP WebDynpro Application

    Hello,
    I developed an ABAP web dynpro application in our SRM system that display a contract list.
    How can I do a link from the contract number in the displayed List to the contract screen of the SRM system
    ( The contract Transaction in the SRM with the contract No )
    Thank You in Advanced
    Bella

    go to window
    create suspend outbound plug and resume inbound type
    when create an outbound plug of Suspend type a parameter Url is automatically created,
    fire the outbuond plug with the Url to a BSP page where you have JavaScript.
    and fromt he BSP navigate back to WDA again which you can do using by reading the url parameter sap-wd-resumeurl, which contains the WDA URL
    Abhi

  • Product Category Hierarchy in SRM

    Hi,
    Is any one has experienced in Creating product category hierarchy in SRM7.0?
    Also how we can replicate the material group hierarchy from ECC to SRM7.0?
    Vasu

    Hi all,
    How are you?
    I´ve seen some scenarios where clients have product category maintained in R/3 (SPRO / Logistics - General / Material master / Settings for key fields / Define Material groups).
    You can use LSMW to create product categories.
    Then you have to replicate those categories / Material groups to SRM. You can do this by Midleware (transaction R3AS). You can see hierarchys in srm at transaction comm_hierarchy.
    Hope this helps,
    Regards,
    http://www.sap4all.eu

Maybe you are looking for

  • Can't Password Protect Configuration Menu

    hi i recently reset my base station and reconfigured everything i can access the net fine and have no problems i created a hidden network and now want to password protect my base station settings in the admin utility since i live in an apartment comp

  • Different calculation on each column in table in obiee 11g report??

    Hi , I have to display values in a table for measures in obiee 11g report which should hold different calculation on each column. For ex: Result 1: Flag  Display   Transaction  Amount   C      'A'                 2              3   C      'B'        

  • IPM and Process Injector

    Hi All, We have just started using IPM and are busy configuring the Process Injector. We have created a application/process/template and can add documents to to the system from the filer and manually add those filed documents to a process. We want to

  • Control sound in timeline

    Hy, I've some mc called, one a time, with attachMovie named mcTarget, each of this has one speaker track sincronized with the animation on the stage. For this reason sound is put directly in timeline in stream mode (proprieties>>Sincr: stream). But n

  • Move files between folders

    I can not drag and drop files between folders within LR5.  Can only move files using OS then finding them LR5  Permissions are OK, using Mac latest updated OS.  Any suggestions?