CCM.CONFIG file overwritten

Hi,
We have a problem in starting the RAS service earlier and then decided to configure the CMS using the CMSDBSETUP.SH script. Apparently, when we setup using the correct CMS name, CLUSTER, and AUDIT DB, the servers (input server, output server, report server, etc) are gone. I checked the CCM.CONFIG file and it is somehow overwritten. The values are gone. Is there a way to configure this file? how can I setup the services?
Thanks.

Yes, thats normal, unfortunately.
For some reason, sun has never developed a clue and realised that people might have a problem with their mail suddenly stopping working.
You will need to regenerate your sendmail.cf from the mc.

Similar Messages

Sendmail patch (config file overwritten)

Hello.
The 122857-04 patch unconditionally overwrote my /etc/mail/sendmail.cf config.
Is this normal behavior ?
M.C>
I was redirected from patch forum ( http://forum.sun.com/jive/thread.jspa?threadID=109284 ).

Yes, thats normal, unfortunately.
For some reason, sun has never developed a clue and realised that people might have a problem with their mail suddenly stopping working.
You will need to regenerate your sendmail.cf from the mc.

Ccm.config issue - cluster

<pre>Hi there,
XI 3.1 , Linux
We have a very strange situation.
We built a cluster for two servers bo1 and bo2 - they had SIA nodes called SIA1 and SIA2 respectively
A week or two ago, the BO repository became corrupted and we had to re-initalise it
This meant re-building the cluster. This necessitated the creatiion of a new SIA node for bo2 called SIAII (not my idea!!)
We did this using cmsdbsetup
This appeared to work and we appeared to have a working cluster
We noticed yesterday that a scheduled webi doc created on bo1 that was to run every 15 minutes was intermittently failing - about 3 out of 10 instances failed.
When we dug deeper, we were able to establish that the webi doc failed when the request was passed to bo2 - indeed it appeared to bring down the wireportserver.exe (both of them)
We re-checked the cluster via cmsdbsetup and everything looked fine.
Then we checked the ccm.config for bo1 and bo2 and things look a little strange. I believe a colleague may edited ccm.config incorrectly - there were 2 sets of entries in ccm.config for bo2 - one for SIA2 and another for SIAII. Perhaps the wrong one was removed/edited
Below is the comparsion of the 2 ccm.config files (bo2 on the left; bo1 on the right)
Neither have anything ins CLUSTER_NAMESERVER="" - is this correct
MYSQLHOSTNAME is incorrect on both
CMSCLUSTER="no" ?
On bo2 the node name is SIANODENAME="SIA2"
We looked at the registry entries and we can see entries for the old SIA...
Real question here is whether the ccm.config is accessed when one member of the cluster passed a report request to the other cluster member - would this be our issue?
SERVICENAME_AUDIT="BOE120_AUDIT"                                SERVICENAME_AUDIT="BOE120_AUDIT"
NAMESERVER="bo2"                                              | NAMESERVER="bo1"
DBTYPE="MySQL"                                                  DBTYPE="MySQL"
INSTALLTYPE="new"                                               INSTALLTYPE="new"
REINIT="yes"                                                    REINIT="yes"
BOBJEVERSION="12.0"                                             BOBJEVERSION="12.0"
SHUTDOWNPORT="8005"                                             SHUTDOWNPORT="8005"
REGFILE="/home/BOXI/bobje/data/.bobj"                           REGFILE="/home/BOXI/bobje/data/.bobj"
DBTYPE_AUDIT="MySQL"                                            DBTYPE_AUDIT="MySQL"
CLUSTER_NAMESERVER=""                                           CLUSTER_NAMESERVER=""
CONNECTORPORT="8080"                                            CONNECTORPORT="8080"
SIAPORTNUMBER="6410"                                            SIAPORTNUMBER="6410"
BOBJELANG="en"                                                  BOBJELANG="en"
BOBJELICENSEKEY="XXXX-xxxxxx-xxxxxxxxx-xxxx"                    BOBJELICENSEKEY="XXXX-xxxxxx-xxxxxxxxx-xxxx"
MYSQLHOSTNAME="127.0.0.1"                                       MYSQLHOSTNAME="127.0.0.1"
PRODUCTID_NAME="BusinessObjects"                                PRODUCTID_NAME="BusinessObjects"
PRODUCTID_VER="12.1"                                            PRODUCTID_VER="12.1"
LOCALNAMESERVER="bo2"                                         | LOCALNAMESERVER="bo1"
PIDDIR="/home/BOXI/bobje/serverpids"                            PIDDIR="/home/BOXI/bobje/serverpids"
CMSCLUSTER="no"                                                 CMSCLUSTER="no"
REDIRECTPORT="8443"                                             REDIRECTPORT="8443"
SIANODENAME="SIA2"                                            | SIANODENAME="SIA"
DEFAULT_NAMESERVER="bo2"                                      | DEFAULT_NAMESERVER="bo1"
INSTALL_DIR="/home/BOXI/bobje/"                                 INSTALL_DIR="/home/BOXI/bobje/"
BOBJEUSERNAME="toronto1"                                        BOBJEUSERNAME="toronto1"
CMSNAMESERVER="bo2"                                           | CMSNAMESERVER="bo1"
DATABASEUID="toronto1"                                          DATABASEUID="toronto1"
INSTALLMYSQL="yes"                                              INSTALLMYSQL="yes"
BOBJEDIR="/home/BOXI/bobje/"                                    BOBJEDIR="/home/BOXI/bobje/"
BOBJEINSTALLLOCAL="system"                                      BOBJEINSTALLLOCAL="system"
SERVICENAME="BOE120"                                            SERVICENAME="BOE120"
CMSPORTNUMBER="6400"                                            CMSPORTNUMBER="6400"
CLUSTERPORTNUMBER="6400"                                        CLUSTERPORTNUMBER="6400"
SERVICEPORT="3306"                                              SERVICEPORT="3306"
SERVICEPORT_AUDIT="3306"                                        SERVICEPORT_AUDIT="3306"
MYSQLHOSTNAME_AUDIT="127.0.0.1"                                 MYSQLHOSTNAME_AUDIT="127.0.0.1"
SIAIILAUNCH='"/home/BOXI/bobje/enterprise120/generic/bobjrest | SIALAUNCH='"/home/BOXI/bobje/enterprise120/generic/bobjrestar
</pre>
Edited by: jemstar on Jun 25, 2009 12:42 PM

<pre>The logs are attached below - might be a registry related issue??
ceserver.cpp:968:virtual bool CDZServer::onInitialize(): TraceLog message 1
2009/06/25 10:40:42.468|>>|E| |16511|1137466256| |||||||||||||||**ERROR:ceserver:invalid entry General\Directories\Config in registry [ceserver.cpp;968]
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 2
2009/06/25 10:41:40.613|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 3
2009/06/25 10:41:40.613|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 4
2009/06/25 10:41:40.850|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 5
2009/06/25 10:41:40.850|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 6
2009/06/25 10:47:06.844|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 7
2009/06/25 10:47:06.844|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 8
2009/06/25 10:47:39.350|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 9
2009/06/25 10:47:39.350|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 10
2009/06/25 10:48:30.154|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 11
2009/06/25 10:48:30.154|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 12
2009/06/25 10:51:39.548|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 13
2009/06/25 10:51:39.548|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 14
2009/06/25 10:54:22.550|>>|E| |16511|1198218128| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 15
2009/06/25 10:54:22.550|>>|E| |16511|1198218128| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 16
2009/06/25 10:55:55.728|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 17
2009/06/25 10:55:55.728|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 18
2009/06/25 10:56:44.085|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 19
2009/06/25 10:56:44.085|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 20
2009/06/25 10:59:11.076|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 21
2009/06/25 10:59:11.076|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 22
2009/06/25 11:01:11.492|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 23
2009/06/25 11:01:11.492|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 24
2009/06/25 11:06:19.005|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 25
2009/06/25 11:06:19.005|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 26
2009/06/25 11:11:12.031|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 27
2009/06/25 11:11:12.031|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
kc3xmlGenericParser.cpp:389:bool Cube::XmlTools::ValueTypedConstant::Validate(const Cube::XmlTools::ic3TokenTranslator*): TraceLog message 28
2009/06/25 11:14:01.242|>>|E| |16511|1170385808| |||||||||||||||**ERROR:C3_GenericParser:ValueTypedConstant::Validate - Client - Invalid value : B95ED5004B624ADF927180432D8E2018 [kc3xmlGenericParser.cpp;389]
kc3cdbdataprovider.cpp:3641:virtual BOResult cdbDataProvider::SetQuerySpec(const ibo_ptr<iboUnknown>&): TraceLog message 29
2009/06/25 11:14:01.250|>>|E| |16511|1170385808| |||||||||||||||**ERROR:C3_Dataprovider:QuerySpec Validate failed ! [kc3cdbdataprovider.cpp;3641]
kdgDocument.cpp:10587:void dgDocument::Check(bool, const char*, bool) const: TraceLog message 30
2009/06/25 11:14:01.250|>>|E| |16511|1170385808| |||||||||||||||**ERROR:dgDocument:An internal error occured while dgDocument is calling pDataProvider->SetQuerySpec(pQuerySpec) [kdgDocument.cpp;10587]
kdgDocumentEx.cpp:1589:virtual BOResult dgDocument::SetQueryMDP(const bo_wstring&, const ibo_ptr<iboUnknown>&, std::ostream&, std::ostream*): TraceLog message 31
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocumentEx:SetQueryMDP: 0.009
kdgDocument.cpp:4342:BOResult dgDocument::SetQueryMDP(const dgCommandParser::DPCOMMAND&, std::ostream&): TraceLog message 32
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:SetQueryMDP: 0.009
kdgDocument.cpp:4020:void dgDocument::UpdateQueryMDP(const dgCommandParser::DPCOMMAND&, std::ostream&): TraceLog message 33
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:UpdateQueryMDP: 0.009
kdgDocument.cpp:1649:virtual BOResult dgDocument::ProcessDPCommands(std::istream&, bool, std::ostream&): TraceLog message 34
2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:ProcessDPCommands: 0.01
SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 35
2009/06/25 11:32:27.546|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 36
2009/06/25 11:32:27.547|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
</pre>

SQL Agent job step - SSIS package - adding a config file - will it override the one that the package specifies?

If I setup a job step to run a package and set the config file location on the "Configurations" tab, will that override the config file that the SSIS package is configured to use? Or is this a "cumulative" type configuration option?
I typically have my config file mixed in with my project files, but that path wont exist on the server.

Hi Shiftbit,
ETL vs ELT is right.
In SSIS 2005, the DTExec utility loads and runs the package, events occur in the following order:
The package file is loaded.
The configurations specified in the package at design time are applied in the order specified in the package (except for Parent Package Variables).
Any options specified from the command line are applied. Any configurations specified on the command line overwrite the current values; however, they do not trigger a reload of the configurations if a changed value impacts a configuration dependency. For
example, if the connection string used for SQL Server configurations is updated from the command line at run time, the package will still retain any other values from the design-time SQL Server configuration database.
Parent Package Variable Configurations are applied.
The package is run.
In SSIS 2008 and higher, utility loads and runs the package, events occur in the following order:
The dtexec utility loads the package.
The utility applies the configurations that were specified in the package at design time and in the order that is specified in the package. (The one exception to this is the Parent Package Variables configurations. The utility applies these configurations
only once and later in the process.)
The utility then applies any options that you specified on the command line.
The utility then reloads the configurations that were specified in the package at design time and in the order specified in the package. (Again, the exception to this rule is the Parent Package Variables configurations). The utility uses any command-line
options that were specified to reload the configurations. Therefore, different values might be reloaded from a different location.
The utility applies the Parent Package Variable configurations.
The utility runs the package.
So, we can see that no matter we use SSIS 2005 which applies the Configurations once or use SSIS 2008 (or higher) which applies the configurations twice, the configurations specified in the command line will affect and not be overwritten by the configurations
specified at design-time.
Reference:
http://technet.microsoft.com/en-us/library/ms141682(v=sql.110).aspx.
Regards,
Mike Yin
TechNet Community Support

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

Jabber for windows 9.2.1 - InitialPhoneSelection doesn't work if configuration is in custom config file

Hi,
my customer wanted set InitialPhoneSelection to deskphone mode, when users firs run Jabber for Windows (ver. 9.2.1).
I created custom config (configurationfile=jabber-config-deskphone.xml) but it doesn't work.
Policies>
<InitialPhoneSelection>deskphone</InitialPhoneSelection>
</Policies>
I tested it couple times and at the end I tried put configuration to default jabber-config.xml and ... this functionality start working...
Could you check guys if you have same problem with custom config file? I think that it is bug. Maybe other option don't work in custom config file.
Thanks a lot
Pavel

Hi Pavel,
This setting is only when the client is installed and started by the user for the first time. After that the client will save the user preference (what was the phone selection when the user exited the client) and use it in subsequent logins.
Having said that, can you please specify in details how exactly you did your tests or maybe test again taking the above into consideration ?
Thanks,
Christos

SQL Agent Job failing - not using credentials in the config file for Data source

Hi
We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
file.
Why the job is not using the credentials in the config file and try to use the proxy account and failing.
Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
Thank you!
VR

Please take a look at these URLs:
Schedule a Package by using SQL Server Agent
SSIS package does not run when called from a SQL Server Agent job step
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

HttpBinding not working when HttpHandler tag is present in web.config file

Hi,
I tried to add a WCF service in WCF Test Client using HttpBinding. But I couldn't add the service. I got the below error.
There was an error downloading 'http://localhost/Services/PostOffice.svc/_vti_bin/ListData.svc/$metadata'.
The request failed with an empty response.
Metadata contains a reference that cannot be resolved: 'http://localhost/Services/PostOffice.svc'.
The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error.
If the service is defined in the current solution, try building the solution and adding the service reference again.
I removed the below code in the Web.Config, later I was able to add the WCF service to the WCF test client.
<httpHandlers>
<add type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" path="Telerik.ReportViewer.axd" verb="*" validate="true" />
</httpHandlers>
I'm not sure with the above code. Could you please let me what is the reason behind it and what is the use of above code and if I remove it how does it affect my application.
Thanks in advance.
Sandeep

Hi Sandeep Pinniti,
Please try to add the following config in your config file:
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
The validateIntegratedModeConfiguration="false" will allow us to keep our httpHandlers section populated without throwing an error. And I have tested in my side,
it works fine.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Changing the Crystal Report dependency from 10.2 to 11.5 using config file

Hi,
We have an windows application in .net 2.0, which refers to Crystal Report 10.2 version. Now the dependency was being upgraded to 11.5. But we do not have the exact source code for the executable to change the dependency from 10.2 to 11.5.
I have installed the CR 11.5 to the testing machine and tried to open the appilcation. it failed saying CR 10.2 dlls were missing
Then I changed the .net config files to change the dependency assembly as follows
<runtime>
     <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" culture="neutral" />
         <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
      </assemblyBinding>
</runtime>
Now the application launched with out any issues. I thought the problem was sorted out.
But when I tried to generate the report, there comes the problem
During the report generation, I am getting the following error
Crystal Reports
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
OK
I do not want to install the 10.2 redistributable in teh machine also do not want to re-compile the sources changing the dependency
Is there any way to achieve this ?
Any help is much appreciated.
Thanks
Edited by: Balaji Narasimhan on Aug 3, 2009 5:28 PM

No way that I know of. I believe once you change the dependency, you will have to recompile the project. Installing CR 10.2, may get this to work, but the app will most likely use the 10.2 references. Let's see if anyone else has any ideas.
Ludek

XML file in the form of .config file how to convert it to class and store it in single object

Hi,
I have a config file in which i have to convert it to class and get an object.
example:
<?xml version="1.0" encoding="utf-8" ?>
<xyz xmlns="">
<Container name ="Basic">
<Connectivity user="" server="" protocol="udp"/>
<Connectivity user="" server="" protocol="udp"/>
</Container>
<Container name ="Cp">
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
<domain name="audio">
<section name="headset">
<setting name="audio_in_agc_enabled " value="1"/>
</section>
<section name="incoming">
<setting name="use_agc" value="1"/>
</section>
<section name="vad">
</section>
</domain>
<domain name="system">
<section name="qos">
<setting name="audio" value="tos 46"/>
</section>
<section name="dtmf">
<setting name="force_send_in_band" value="0"/>
<setting name="minimum_rfc2833_play_time" value="40"/>
</section>
<section name="network">
<setting name="dtx_enabled" value="0"/>
</section>
<section name="diagnostics">
<setting name="enable_logging" value="1"/>
<setting name="log_level" value="Error"/>
</section>
<section name="general">
<setting name="add_OS_version_to_user_agent_header" value="1"/>
</section>
<section name="indialog_notify">
<setting name="enable_indialognotify" value="1"/>
</section>
</domain>
<domain name="rtp">
<section name="2833">
<setting name="enabled" value="1"/>
<setting name="packet_time_in_ms" value="60"/>
<setting name="payload_number" value="101"/>
</section>
<section name="inactivity">
<setting name="timer_enabled" value="0"/>
</section>
</domain>
<domain name="proxies">
<section name="proxy0">
</section>
<section name="proxy1">
</section>
</domain>
<domain name="ggg">
<section name="device">
<setting name="use_headset" value="1"/>
<setting name="rrr" value="1"/>
<setting name="eee" value="480"/>
<setting name="eme" value="hhh"/>
<setting name="headset_name" value="vvv"/>
<setting name="manual_audio_devices_configure" value="0"/>
<setting name="audio_in_device" value=""/>
<setting name="audio_out_device" value=""/>
<setting name="ringer_device" value=""/>
</section>
<section name="system">
<setting name="export_settings" value="EndpointSettings.xml"/>
<setting name="enable_export_settings" value="0"/>
<setting name="log_level_AbstractPhone" value="0"/>
<setting name="log_level_Audio" value="0"/>
<setting name="log_level_Auto Configuration" value="0"/>
<setting name="log_level_CCM" value="0"/>
<setting name="log_level_Conferencing" value="0"/>
<setting name="log_level_Contacts" value="0"/>
<setting name="log_level_DNS" value="0"/>
<setting name="log_level_GUI" value="0"/>
<setting name="log_level_Jitter" value="0"/>
<setting name="log_level_Licensing" value="0"/>
<setting name="log_level_Media" value="0"/>
<setting name="log_level_Privacy" value="0"/>
<setting name="log_level_RTP" value="0"/>
<setting name="log_level_STUN" value="0"/>
<setting name="log_level_Security" value="0"/>
<setting name="log_level_Storage" value="0"/>
<setting name="log_level_Transport" value="0"/>
<setting name="log_level_USB Devices" value="Info"/>
<setting name="log_level_Utilities" value="0"/>
<setting name="log_level_Video" value="0"/>
<setting name="log_level_Voice Quality" value="0"/>
<setting name="log_level_XMPP" value="0"/>
<setting name="log_level_Endpoint" value="6"/>
</section>
<section name="beeptone">
<setting name="play_locally" value="0"/>
<setting name="enable_beeptone" value="1"/>
<setting name="beeptone_file" value="beep.wav"/>
<setting name="beeptone_timeout" value="30000"/>
</section>
<section name="dtmf">
<setting name="play_locally" value="1"/>
<setting name="pause_start_stop_dtmf" value="100"/>
</section>
<section name="control">
<setting name="auto_answer" value="0"/>
</section>
<section name="ctrol">
<setting name="auto_ans" value="0"/>
</section>
</domain>
</settings>
</Container>
</xyz>
Please help me out in creating an object from it.
Thanks,
Hiranmayee

It's one of those things you usually start from the other end.
IE with a class and then serialise / deserialize to xml.
Because you have a namespace in there:
<settings version="1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.counterpath.com/cps">
I think you will find linq to xml will have issues with that.
You could still use xpath to pick data out of there and there's been a thread on the c# forum recently which is relevent:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2dc0581e-f2fd-4fd3-89ee-e59280c398e6/read-xml?forum=csharpgeneral
Why do you want to turn that into an object?
By the way.
This isn't a wpf question and you should probably have posted it on the c# forum.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support

How can I use my log4j config file of my web project in ias?

I used log4j in my web project. So I put a config file "log4j.properties" in my project WEB-INF/classes/.
It works well in tomcat. But when I deploy it to ias parent by orabpel project, It didn't work know!
I can only see my log in "$ORACLE_HOME/opmn/logs", and some message I nedd is losed, such as the class name, line,datetime, Thread and so on.
I think the config file of my project is't work, maybe log4j use some config file of ias but me.thx
So where is the log4j config file of ias, can i modify it ?
Or how can I let my project use my config file not ias? Any one can help me, thx!

If you are wondering if/how to control the log messages coming from bpel, here is the corresponding log4j config file that it uses:
$ORACLE_HOME/bpel/domains/<DOMAIN_NAME>/config/log4j-config.xml

How to add shortcuts to user Start Menu and Taskbar or Desktop with using Microsoft Office 2013 Config file.

Hello,
How can i add the shortcuts for Office 2013 feature (Word, excel, ext) to the users taskbar or desktop with using config.xml file while installing the Microsoft Office 2013 from SCCM?
I know how to do that with OCT, but i have another problem if i use OCT. So i have to do it with Config.file, but i don't know which code can i write on config.xml file to create shortcut on desktop or taskbar...
Regards,

Hi
There is a known issue about
changing the shortcut location for an Office 2013 application:
When you try to change the shortcut locations for Office 2013 applications in the Office Customization Tool (OCT), you receive the following error message:
Invalid start in folder. Please try again.
Then, you add the Start in location for Office 2013 and run a customized installation. When you double-click the shortcuts that are displayed on the desktop, Configure shortcuts does
not work and you receive the following error message:
Sorry, we couldn’t find your file. Is it possible it was moved, renamed or deleted?
To work around this issue, type a single open bracket ([) in the Start in
field.
In addition, refer to the link below on "Configure shortcuts" in OCT:
http://technet.microsoft.com/en-us/library/cc179097.aspx#Configure_shortcuts
Regards
Tylor Wang
TechNet Community Support

Replacing Time Capsule - can I save my old config file to use with new one?

I have a Time Capsule backing up 3 of my Macs. A couple of nights ago, I started receiving the following: "sparsebundle” could not be created error 22
on all 3 Macs.Time Machine application fails due to this error and if I access the Time Machine in Finder, I can see the 3 volumes but cannot go any deeper. I get the same sparsebundle error.
A few minutes ago, my wife called me stating that her MBP gave her a backup error stating that the backup Volume name changed, continue or don't backup. Something weird is obviously going on. I also noticed that the TM fan was kicked up into high gear. I'm suspecting a hardware failure of some sort.
Thoughts?
If I do need to replace my TC, is there a way to save the config file from my old one and import/use it on a new TC if I have to purchase one? Would save me from entering a lot of wireless access devices since I use MAC filtering.

Yes you can easily import/export settings ( I have 6 base stations so do this quite a lot - in fact I always export the configs as a backup anyway)
As to your TC can you connect it locally and run Disk Utils to see if it need some repairs?
Regards,
Shawn

Unable to view the contents in NQS Config file

Hi Forum,
After I successfully install the OBI EE 10.1.3 Application, I am unable to view the contents in NQS Config file. It is opening in Notepad with error showing as "The filename, directory name or volume label syntax is incorrect."
So please guide me in resolving this issue.
Regards
Cool j

You probably have restricted access to the file. Check if the drive is ntfs. If the os user is in administrator group, you can give permissions in file properties.

CCM.CONFIG file overwritten

Similar Messages

Maybe you are looking for