CCM - content of customer characteristic not mapped to procurement catalog

Hi experts,
I uploaded a sample CSV-file supplier catalog. Within the supplier catalog I defined a customer characteristic of type /CCM/ATTACHMENT.
The supplier catalog is uploaded without any problems and also the /CCM/ATTACHMENT characteristic is filled correctly with description, mime type and URL.
I mapped now the supplier catalog to the master catalog and then to the procurement catalog.
All the content except the content of the customer characteristic /CCM/ATTACHMNENT is mapped to the master and procurement catalog. The characteristic /CCM/ATTACHMENT is available in the master and procurement catalog and I can even see the characteristic there. But no content is in there.
Are there any additional steps when I try to map customer characteristic? The characteristic is in definitely available in the master and procurement catalog schema and catalog.
Thanks in advance for your help! I will reward points.
Tom

Hi,
Try select both the characteristic in mapping, do "Assign Characteristics" for automatic characteristic assignment, include sub categories and SAVE.
A message will appear for assigning characteristic, then go for MAP CONTENT all items will be mapped and will be obtained in Procurement catalog.
Best Reg.,
Sridhar

Similar Messages

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

SRM - CCM 1.0 - How we can recover deleted procurement catalog

Hi,
We are using CCM1.0.
Is there any method to recover deleted procurement catalog?
Appropriate answer will be rewarded.
Thanks

Hi
Welcome to World of SRM !!!
I don't think it's possible to recover the deleted catalogs. Anyways, will try to find something and come back on this.
Meanwhile, have a word with SAP, by raising a Customer OSS Message on this as well.
Regards
- Atul

CRM Customer could not be mapped to ERP CUstomer

Dear Experts
SOme times when i create Quoatation when i entere Sold to party system gives following warning " CRM Customer could not be mapped to ERP CUstomer "
Kinldy let me know what does this warning means
And how t orectify / correct it
CRM and ecc is connected means data for quotation follows from crm to ecc .all customers are maintained in MDM which is used by ECC n CRM both

Hi,
Please check similar thread:
http://forums.sdn.sap.com/thread.jspa?threadID=1761946
Denis

Custom value handler mapping not instantiated

Hi,
Am using a custom value handler mapping which which gets inserted from a standalone client.
But whn i try to insert using the same in a aplpication server, I get the following error:
kodo.jdo.FatalUserException: Field "keyValue" declared custom mapping strategy "KeyHandler", but this strategy cannot be instantiated.
This error is seen while parsing the package.jdo within the container.
yohannj

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

CCM 2.0 - new characteristic

Hello everybody,
how can I add a characteristic in a CCM 2.0 supplier catalogue? I can't find a button to add or delete a charactaristic in web transaction.
I also tried to add an item while uploading a supplier catalogue with a CSV file. Here is the line:
Characteristic|ZTEST|/CCM/NAME|false|ZTEST
This also does not work. Although I don't get an error in SLG1 log, I can't find the characteristic when I display the supplier catalogue in webbrowser?
For us it is mandatory to add some specific fields for the suppliers in supplier catalogue.
Thanks for you help
AD

Hello AD,
Hope you already know that you can not modify supplier catalog in any way as it's interpretted as supplier content and designed so that it should not be modified.
You can modify the content in Master catalog or procurement catalog to which your this supplier catalog would be mapped wuth many otref catalog.
In master catalog you can find button for your custom charactristic.
BR
Dinesh
reward if helps

Some offerings are missing user input, some are not mapping to activites

Seemingly out of the blue my system has stopped mapping request offering answers to (manual) activities (mapping to the SR itself works), neither OotB properties or custom properties. This only happens when submitting them from the portal (ALL
offerings)
Also, some requests are even missing user input (and obviously no mapping is possible).
This issue seem to affect all users. Even admins
I have tried restarting the web content server and also the website on the sharepoint server. I have also tried creating a brand new template and offering in a brand new MP.
I have been able to track down a ca. point in time this issue arose, but not found anything in logs anywhere (except SMPortalTrace). Checked web content server event log and website log, SQL log, event log on both management servers.
I have checked the SMPortalTrace.log and for every request submitted I get an error (not visible in the portal) - some is in danish, so I have translated at the best of my ability:
Failed to parse the description with links., System.ArgumentNullException: [ArgumentNull_Generic]
Ressourcestrings for troubleshooting is not available. Keys and arguments often contains enough information to start the troubleshooting a problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.30214.00&File=mscorlib.dll&Key=ArgumentNull_Generic
ParameterName: input
At System.Text.RegularExpressions.Regex.Matches (String input)
At Microsoft.Enterprisemanagement.ServiceManager.Portal.RequestOfferingSilverlightModule.UriParser.ParseDescription(string description)
The system is SCSM 2012 R2 UR2 (except the SP part of the portal)
Update:
I found that if the user input is missing even from the SR then the error does not present itself in the SMPortalTrace.log, only if the user input goes through (but is not mapped to activities).
http://codebeaver.blogspot.dk/

The issue seems to be related to a syntactically valid type projection in the Service Request form (customized) - I added a component to the existing projection. As the template that a request offering is based on has a reference to this projection I guess
the code that creates the Service Request submitted from the portal somehow ignores the "unwanted" type projection component, and instead of not submitting the request it continues but is unable to map into child activities. I will try and reproduce
this in more detail.
Solution: Revert to original type projection in the SR form and everything went back to normal.
http://codebeaver.blogspot.dk/

Create custom characteristic

Hi,
Can anyone tell me how to create a mapping between a custom characteristic created in the BW system and the 7.0 datasource containing the master data. I have both of these in my BW system but am not sure how to define the mapping. Please advise!
Thanks,
CM

Have the custom characteristic in your data target and map it using direct mapping in the transformation...? anything specific that has been missed out in your question ?

I can not map field after changing data source location

Hi
I have a small problem that I got a report file and database from my customer, after that I setup database, open the file and change data source to my setting. but some filed can not map. The field mapping widonw does not display all field in the table. Of course I have checked the missing fields are existing in the table.
OS:Windows7
DB:Oracle11
CR:XI Release 2
Does anyone have an idea?

hi,
In Map Fields window, there is an option "Match Type".
Please Unchek that option, so that you will be able to see all the fields from that table.
Also, while mapping please verify the datatypes of source and target fields.
Regards,
Vamsee

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

CCM 2.0: Status of items is not changed in Master Catalog

Hello all,
when I upload the same items in Supplier Catalog in Master Catalog and Procurement Catalog for items status is not changed from "Approved" to "Not Approved".
Funny thing is that items need to be approved to go to Procurement Catalog from Master and to publish Procurement Catalog.
What to do?
Gordan

Hello Gordan,
do you mean that in CAT customizing you have your /ccm/master_catalog with "approved" value and the name of your procurement with "To approve" value?
Best regards
Jorge

FAGLL03, FS10N (Layout), FBL3N Customer No not Pick

Dear All,
when my user go for GL line item level through FAGLL03, FS10N (Layout), FBL3N customer no not picking line layout
In that perticuler GL account Sort key also assign Customer no but line layout cutomer field is there but not pick the customer no
Pl help this issue
Regards
KSP

Hi:
I again assert the same thing..No matter what you maintained in sort key field like PO numbers, vendor or customer numbers can be fetched in reports in FBL3N, FAGLL03 or FS10N line items.. Reason i quoted above..However you have an option to fetch this field using Business transaction event 1650 using FIBF..Your ABAPER will need to modify structures and then modify the contents..Please check it with your ABAPER , i am sure you will get your issue resolved..
Regards

Reference details field in VM - Pmt transactions tab not mapping in idoc

Hello,
We have account numbers that are longer than 18 characters for some vendors & BP and need to enter the remainder characters in the field Reference Details of the vendor master and BP (in the Payment transactions tab). However, these additional characters are not mapping in the PAYEXT idoc. Is there an additional setting that can be done for this value to map in the idoc without making a code change?
thanks,
Paola

/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
it talks about reading a TAB delimited file. You can reference the same to help you with creating a TAB limited file (check the parameter .fieldSeparator that is the key)
you dont have to include any TABs in the mapping.
Some other help for the receiver file adapter is;
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts

|Error SQL: ORA-14400: inserted partition key does not map to any partition

I have an installation of ECC6 with BI7 in which consolidated through SEM-BCS OBCS_C10 with the cube, which I have version 100 for fiscal data, 101 data for IFRS and IFRS Copying a 301 version.
The client will ask me the empty version of the 301 in the cube OBCS_C10.
Before switching to empty the cube "Target Real-Time Data Can Be Loaded With Data; Planning Not Allowed."
To empty the cube using transaction RSA1 / manage / contents / Delete Selection.
However, the data is not erased and revise the job gives me the error:
Resumen log job para job BI_INDXD51A1NTCIYWU06OKZZESN1R94 / 07520600
Log job
Hora
Txt.mje.no codificado
04.02.2009
07:52:06
El job ha sido lanzado.
04.02.2009
07:52:06
Paso 001 iniciado (programa RSINDEX1, variante &0000000000108, usuario ACHUY)
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:10
AND INDEXNAME = ' ' AND TABNAME =
04.02.2009
07:52:10
'/BI0/D0BCS_C101
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:10
AND INDEXNAME = ' ' AND TABNAME =
04.02.2009
07:52:10
'/BI0/D0BCS_C101
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:10
SQL: 04.02.2009 07:52:10 ACHUY
04.02.2009
07:52:10
CREATE TABLE "/BI0/0100000076" PCTFREE 00
04.02.2009
07:52:10
PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
04.02.2009
07:52:10
STORAGE (INITIAL     0000000016 K NEXT
04.02.2009
07:52:10
0000000016 K MINEXTENTS 0000000001 MAXEXTENTS
04.02.2009
07:52:10
UNLIMITED PCTINCREASE 0000 FREELISTS   001
04.02.2009
07:52:10
FREELIST GROUPS 01) AS SELECT DISTINCT DIMID FROM
04.02.2009
07:52:10
"/BI0/D0BCS_C101" "DIM" , "/BI0/SCS_VERSION"
04.02.2009
07:52:10
"MD1" WHERE "DIM"."SID_0CS_VERSION" = "MD1"."SID"
04.02.2009
07:52:10
AND ( "MD1"."CS_VERSION" BETWEEN '301' AND '301'
04.02.2009
07:52:10
SQL-END: 04.02.2009 07:52:10 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:25
AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
04.02.2009
07:52:25
SQL-END: 04.02.2009 07:52:25 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
DELETE FROM DDSTORAGE WHERE DBSYSABBR = 'ORA'
04.02.2009
07:52:25
AND INDEXNAME = ' ' AND TABNAME = '/BI0/F0BCS_C10
04.02.2009
07:52:25
SQL-END: 04.02.2009 07:52:25 00:00:00
04.02.2009
07:52:25
SQL: 04.02.2009 07:52:25 ACHUY
04.02.2009
07:52:25
CREATE TABLE "/BI0/0100000030" PCTFREE 10
04.02.2009
07:52:25
PCTUSED 00 INITRANS 001 TABLESPACE PSAPSR3
04.02.2009
07:52:25
STORAGE (INITIAL     0000000016 K NEXT
04.02.2009
07:52:25
0000000000 K MINEXTENTS 0000000001 MAXEXTENTS
04.02.2009
07:52:25
2147483645 PCTINCREASE 0000 FREELISTS   001
04.02.2009
07:52:25
FREELIST GROUPS 01) PARTITION BY RANGE
04.02.2009
07:52:25
("KEY_0BCS_C10P") ( PARTITION "/BI0/F0BCS_C100"
04.02.2009
07:52:25
VALUES LESS THAN (0) TABLESPACE "PSAPSR3",
04.02.2009
07:52:25
PARTITION "/BI0/F0BCS_C100000000019" VALUES LESS
04.02.2009
07:52:25
THAN (0000000019) TABLESPACE "PSAPSR3", PARTITION
              |
04.02.2009
07:52:25
"/BI0/F0BCS_C100000000276" VALUES LESS THAN
04.02.2009
07:52:25
(0000000276) TABLESPACE "PSAPSR3", PARTITION
04.02.2009
07:52:25
"/BI0/F0BCS_C100000000277" VALUES LESS THAN
04.02.2009
07:52:25
(0000000277) TABLESPACE "PSAPSR3") AS SELECT *
04.02.2009
07:52:25
FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT
04.02.2009
07:52:25
IN ( SELECT "DIMID" FROM "/BI0/0100000076"
04.02.2009
07:52:29
SQL-END: 04.02.2009 07:52:29 00:00:04
04.02.2009
07:52:29
Error SQL: ORA-14400: inserted partition key does not map to any partition
04.02.2009
07:52:29
Error de sistema: CREATE_TABLE_AS_SELECT/RSDU_EXEC_SQL /BI0/0100000030 14400
04.02.2009
07:52:29
El job ha sido cancelado tras excepción de sistema ERROR_MESSAGE.
Someone has an idea how to fix this?

This is the SQL of the insert
The partition condition of the table is the column ("KEY_0BCS_C10P")
SELECT * FROM "/BI0/F0BCS_C10" WHERE "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM "/BI0/0100000076" )
This is the info of the /BIO/0100000076 TABLE
SQL> SELECT "DIMID" FROM sapsr3."/BI0/0100000076";
     DIMID
         6
SQL>
And this are the rows that I think are not included in the partitions of the table
1 SELECT DISTINCT KEY_0BCS_C10P, KEY_0BCS_C101 FROM SAPSR3."/BI0/F0BCS_C10"
2 WHERE KEY_0BCS_C10P > 277
3* AND "KEY_0BCS_C101" NOT IN ( SELECT "DIMID" FROM SAPSR3."/BI0/0100000076" )
SQL> /
KEY_0BCS_C10P KEY_0BCS_C101
          284             4
          285             4
          293             3
          292             4
          293             4
          293             5
          285             3
          290             4
          292             5
          283             4
          285             5
KEY_0BCS_C10P KEY_0BCS_C101
          291             5
          292             3
          291             4
14 rows selected.
SQL>

How to get content of custom fields that were created via the EEWB for CIC?

Hi
Can anyone tell me how to get the content of custom fields that were created via the EEWB for CIC? This is required at a time when the data has not been written to the database.
I would like to know how to read this data in the CRM_APPOINTMENT_MERGE method of CRM_APPOINTMENT_BADI.
Thanks

Hi Michael,
I have a requirement to replicate custom setype data created for CRM sales order to R/3 sales order.These fields have been created at item level.
Do you know the set of steps to achieve the same.
Any help would be appreciated.
Thanks,
Chamu

CCM - content of customer characteristic not mapped to procurement catalog

Similar Messages

Maybe you are looking for