Ccm microsoft Ad integration, IP phone asking username password

Hi,
We've CCM 3.5 recently integrated with Microsoft AD. When any change is made in AD, it is reflected on CCM as well. I believe integration is fine.
Now, whenever any IP phone user presses Directory / Services button, it is asking for username password. I am not sure what to punch in to get access. This is started after integration only.
Anyone has any clue what and where to look at?
Thanks for your time.
Thanks,
inner_silence

HI,
Please find below replies:
When you say Directory / Services button do you mean both buttons?
[inner_silence] Yes. Both buttons.
Have you ever modified any of the web pages on the CallManager server?
[inner_silence] No. All URL's are pointing to CCM IP.
What are the URL's defined for Services and Directory buttons in your Enterprise Parameters...? Have these been changed from the defaults?
[inner_silence] NO. They are on default.
When CallManager was using the inbuilt DC Directory.. what was the UserID field? Now that it is integrated to AD, what is it? Is it the same?
[inner_silence] AD server user name/password is in use now. Previously CCM Admin username password was in use.
If it is different, then your phone services for everybody will be out of sync, i.e. you would have to change the UserID in all of these.
Finally, you didnt upgrade CallManager at the same time? :)
[inner_silence] NO.
Additional info: IP Phone asks for username/password and not username/PIN. Tried combinations of username/password/PIN but no success.
Thanks,
inner_silence

Similar Messages

  • Cisco aironet access-point keep asking username/password

    Hi all,
    Some of my access-points (Light Weight) just keep asking username/passwords when accessed through web and clicked on any option available there. Any idea why that happens?
    Thanks in advance!
    Gaurav

    Some of my access-points (Light Weight) just keep asking username/passwords when accessed through web and clicked on any option available there.You sure it's LWAP?  The reason why I'm asking because you would NOT be able to access an LWAP over HTML because it's LWAP.

  • Locked out of phone, asking for "password." How to get around this without factory reset/destroying data?

    My Galaxy S4 decided to password protect itself... no idea why. I usually use the Lock Screen pattern, when I screw that up enough it prompts me for a PIN. I guess that's what happened, but after I got in after doing entering the PIN, I didn't reset my PIN or pattern, so now it's asking me for a password to get into the phone.
    I've tried using Android Device Manager to send the phone a new password... it doesn't work. When I send an integer only password the phone prompts for a PIN, but it doesn't accept the PIN I send, and when I send it a alpha-numeric password, it prompts for a password, but doesn't accept that either. Clearly the phone is acknowledging the receipt of new protocol.... but it's not adhering to the new directions.
    Anyone know how get around this? Or another method that doesn't require me destroying all of my data? Or a way for me to retrieve my data without having to manually select "Use as Media Device" (can't do this since I can't access the drop down menu).

        Thanks for trying all those steps already, Salos. We don't have a way to retrieve any passwords set up on your phone for the lock codes or accounts. Based on your description, it sounds as if it may be asking for your Google account password. It's the fallback for many Android-based devices when a lock passcode/pattern/PIN is entered incorrectly too many times. Try logging into Google.com with the Gmail email address you set up as your main account for the phone to ensure you have the correct username and password combination. Then try entering that same information on the phone when prompted. It's important to also make sure the phone is in an area with a good data signal (WiFi or 3G /4G LTE). If you are unable to access the phone using any passwords or PIN that you created, then the reset would be the final step but will result in the loss of the data on your phone.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • HI sir, i  got a problem while using oracle 11g,where it is asking username

    I installed Oracle11g R1 DB version 11.1.0.6 and upgraded it to 11.1.0.7 using patch set 6890831 .After that i wantd to use SQL * plus,but it is asking username & passwords. But while installing it didn't ask for any usernames ,so i tried all default usernames but didnt work. Can any one help me.

    Hi,
    After applying patch did u create Listener(using netca command) and created a database(using dbca command) ?
    I guess u have not created the database where u would be providing the username and password to login to sqlplus.
    If u have any other queries let me know.
    Thanks,
    Edwin

  • Cisco 1921 no username password commad

    Hi,
    I  ahve countered an issue today. I was working on 1921 which is used as  test router in ISP. I have loaded a router with test config with  username & password in running config. After a while i have removed  the username & password with no username---password---- command,  then i logged out of router. But now its not allowing me to login as its  asking username & password while its not taking any  username/password not even cisco/cisco, admin/administrator.
    Is  this a behaviour of 1921 as i have not copied the runn to start but i  disconneced from secure putty session when router was in running config  mode. Kindly help.
    Regards,
    Vishal

    You have the router configured to use the local user database, but you have removed all the accounts. Doing that will not disable the configuration for using the local database. What you are experiencing is "normal". Menaing that the router is configured for authentication but there are no valid accounts. Like Reza stated, reboot the router and you'll get the startup config. If the config was saved, you'll have to do a password recovery on it.

  • Windows 8.1 - data card asking administrator password while connecting.

    Dear Microsoft team,
    My data card asking administrator password while connecting.
    I am using win 8.1 64 bit and i have already changed UAC settings.
    Note : it is working fine in administrator login.
    Any help  appreciated in advance !

    Hi,
    Based on your description, this happens to a standard domain account, you don’t necessarily disable the UAC, instead, you can add the domain account to the local administrator group, in this way, you grant permission to this account, then log on with the
    domain account again to check the result.
    You can follow the referenct below for details about it, this link is for Windows 7, but apply for Wndows 8, too:
    http://windows.microsoft.com/en-us/windows/add-user-account-to-group#1TC=windows-7
    Regards
    Wade Liu
    TechNet Community Support

  • Is there a way to make the portal doesn't ask username and password

    Hello everyone,
    i wonder that is there a way to make the portal doesn't ask username and password.
    I mean when you open url :
    http://<portal_address>:50000/irj/portal
    the user is granted according to his/her windows domain username.

    Hi Ali,
    You can configure the Kerberos authentication for using integrated Windows authentication.
    The Kerberos protocol is an integral part of the Windows 2000 operating system and enables Windows Integrated Authentication in a Windows Domain without an intermediary Web server.  <a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/4bd58c6c5e5f34e10000000a1553f6/frameset.htm">See the Link</a>
    Hope it helps.
    Thanks,
    Ami
    PS: consider rewarding points if its helpful

  • How do I setup Forms not to ask RAD username/password when opening a form

    Good day
    I have setup oid and sso and they work I can sign on to database with an oid user using sqlplus.
    If I set SsoDynamicResourceCreate=true and enter the user id and password in at the popup it works correct and won’t even ask it again
    What I want to know how can set portal to use a RAD/DAS without prompting for a username password.
    We need to do this for all +/- 30000 users and if so how do we do it pragmatically.
    I think because I don’t have much APPS experience I basically don’t know where this must be set globally
    APPS is version 10.1.2
    Regards
    Cliff
    Message was edited by:
    cliffnel

    Got solution in metalink note 262686.1
    Goto <infrastructure :port>/oiddas
    Click Configuration Tab
    Click Preference Tab
    Create Default RAD for database

  • How do I use my WET54g with a wireless system that asks for username & password

    Hotels and other systems let you use theiur wireless for a fee.  You go onto your wireless laptop, and it automatically goes to a page where you pay and sign up (or it asks for a username and password), once that is done, you can use the network.
    How do I allow my WET54g to know this password information, and work on the network?
    thanks
    Michael

    The WET54g allows you to accept a wireless signal and connect it to a wired hub.  I want to intercept the wireless signal and use it on my hub.
    I know I can use one computer if I connect to the signal using my laptop's wireless card, but I want the WET54g to accept the signal.
    For example, currently at my office, I use the WET54g to intercept a wireless signal from the front of my building, to the back of my building about 300ft away (this way I didnt have to run wires).  The WET54g then is hooked up to a hub/switch where I have a bunch of other computers/servers.  Everything from the front of my building and back of the building are joined using this WET54g.  The WET54g is set up to find the signal from the front of my building, and therefore it works fine.
    I want to use the hotel signal, the same way, except there is no way to enter in the username/password into the WET54g, or maybe there is..  Does this make sense to you? 

  • TS2529 I recently got a new iphone and some of my apps don't work anymore. When I try to open them they either crash immediately or my phone asks for my iTunes Store password and then the app crashes. Any ideas? Help!

    I've tried to uninstall and reinstall the app but nothing happens. When I try to open the app, it either crashes immediately or asks me for my iTunes password and the the app does nothing or crashes. Has anyone else had this problem? Any suggestions? Also, it seems that my phone asks me for my iTunes password randomly, when I'm not trying to open apps.
    The app that I have the most problem with is the Simpsons game. I've tried to contact EA as well as apple and gotten nowhere.
    Please help if you have knowledge of what to do
    Thanks!

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • I use master password & if I change passwords on a site, it doesn't ask to "change" Also doesn't ask to "remember" with new usernames/passwords. Does anyone know how to fix this or add usernames & passwords to saved password page on Firefox.

    Firefox (I think version 5, maybe 4) does not ask to "remember" passwords anymore nor does it ask to "change" a password when I've done that. It didn't ask when I changed my Facebook password & I have to log in each time so I removed my username & password for FB on Firefox's "saved password" page. When I've don't that before, it asks to "remember" but doesn't anymore. I use a master password.

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.com/kb/Private+Browsing
    To see all History and Cookie settings, choose:
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"
    The website may be using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • When I try to download a free app my phone ask for my cc number and says its incorrect?? Why and how do I fix it?

    Why is my Phone asking for this information? How do I fix it?

    Did you try to contact account support to get expert help with regaining and restoring access to your account ?

  • HT5622 hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    The iPhone has a feature called "Activation Lock" described here:
    http://support.apple.com/kb/PH13695
    Without that Apple ID, you will not be able to use that iPhone.

  • I got my ipod, and my wife, her iphone. I downloaded an app and use it in my itouch, but when my wife download it in her iphone, and the phone ask her to update it, it asks for my apple ID, but she has her own apple ID, how do we avoid this?

    I got my ipod, and my wife, her iphone. I downloaded an app and use it in my itouch, but when my wife download it in her iphone, and the phone ask her to update it, it asks for my apple ID, but she has her own apple ID, how do we avoid this?

    Hi peacemakerco,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to sign in on the iPhone with the right Apple ID:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Best,
    Jeremy

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

Maybe you are looking for

  • Box inside another box in SMARTFORM for hierarchical item data printing

    Hi All, I need to put a <b>box inside another box</b> and <b>both the boxes need to be bordered</b>. There are 2 levels of main data to be printed in the 2 boxes. Header data will be printed in the outer box and corresponding to each header row a num

  • Excel file size

    Not sure if this is the right forum. Please excuse me if this is the wrong forum. I have Excel for Mac, version 14.3.9 I have IMac OS X Mavericks 10.9 I'd like to know the file size (how many MBs or KBs ) of each of my Excel workbooks or charts. I'd

  • How to implents a DataSource interface

    I'd like to implements the DataSource Interface.Actually I don't know if it's yet implemented by MS Access driver.how I could know that?

  • Restoration for Compaq mini CQ10-112nr

    My HP Compaq mini CQ10+12nr has crashed  I was trying to restore it to factory default and now it will not let me even go to the safe mode screen it will not even sign on,  It will go to the screen that will give you the option of safe mode and etc.

  • Copies from my all-in-one are pages of solid black streaks

    The copies from my all-in-one are completely streaked with black ink.  I have attempted all the trouble shooting suggestions with no success. Is there something else I should be aware about?