/ccm/minimum_quantity

Hai All,
when I try to upload /ccm/minimum_quantity characteristic via CSV file to supplier catalog, the system gives error message. However when I entered it manually in procurement catalog, it is fine.
How to upload this characteristic via CSV file to supplier catalog?
Curently we using
- SRM 5.0
- CCM 2.0
- CSV 2.0
Regards,
Feri.

Hi Feri
Can you please post your CSV file content? Just the beginning of it till the 1st content line (e.g. till where your MAT0000001 item is specified) should be sufficient... not to blow up the forum.
Do you upload a schema file first followed by a content file or do you upload your schema and content using one single file?
Does the error happen only for this item or for all?
Were you ever able to upload catalog content before or is it the first time you try it?
/CCM/MINIMUM_QUANTITY is a standard chara. It is also valid for supplier catalogs and automatically available. It has not to be specified separately in your schema file. As all other standard chara you can just use it in your content valuation line of your CVS file.
Did you already run report /CCM/INITIALIZE_CME in your CCM system / client? This is required once at the end of customizing / setup of CCM but before beginning with uploads or content creation.
Sorry for asking you so much questions but I need a bit more information around your issue to help you.
Kind regards,
Renaud

Similar Messages

  • /CCM/MINIMUM_QUANTITY[1]#/CCM/QUANTITY_VALUE

    Dear all,
    we try to upload a csv 2.0 file.
    Everything works fine when we don´t use "/CCM/MINIMUM_QUANTITY[1]#/CCM/QUANTITY_VALUE" and "/CCM/MINIMUM_QUANTITY[1]#/CCM/UNIT_CODE"
    But we need the fields.
    Which value is expected from CCM in this field? "/CCM/MINIMUM_QUANTITY[1]#/CCM/QUANTITY_VALUE"
    We tried 1, 0,1, 0.1 nothing worked.
    Data Type is "exponent"
    Thanks in advance
    Ralf

    Hey.
    we solved it.
    The one [1] was the problem
    /CCM/MINIMUM_QUANTITY[1]#/CCM/QUANTITY_VALUE -> wrong
    /CCM/MINIMUM_QUANTITY#/CCM/QUANTITY_VALUE -> correct

  • Upload material and contract data from file in CCM 2.0

    Hi guys,
    This might be a difficult one!
    We have the following situation in a Client:
    We are upgrading a Requisitite catalog (working with BBP 2.0)
    to a CCM 2.0 catalog.
    In Requisite, one can upload material- and contract data from a file (it is standard funcionality) into the database.
    We need to have the same kind of funcionality in CCM 2.0 because our client does not prefer to work with XI (which is the standard SAP solution in these cases).
    How can we accomplish this? maybe with some additional ABAP coding!
    Our client is not working with Vendor Catalogs but I´m trying to see if we can use a dummy vendor catalog to accomplish material upload in CCM2 form a CSV file.
    Anyone had to face this situation before?
    If so, please provide some clues how to do it?
    Thanks in advance,
    Aart

    SAP CATALOG CSV 2.0 <;>
    Defaults;EN
    Model
    Catalog;All;;All Catalog
    DataType;DATE;DATE;Date
    Characteristic;Z_ACTION;/CCM/NAME;false;Action
    Characteristic;/CCM/PRODUCT_ID;/CCM/ID;false;Part Number
    Characteristic;/CCM/SHORT_DESCRIPTION;/CCM/DESCRIPTION;false;Description
    Characteristic;Z_MATERIAL_TYPE;/CCM/ID;false;Material Type
    Characteristic;/CCM/MINIMUM_QUANTITY;/CCM/MINIMUM_QUANTITY;false;Order Unit
    Characteristic;Z_CONTENT;/CCM/MINIMUM_QUANTITY;false;Content
    Characteristic;/CCM/LEAD_TIME;/CCM/LEAD_TIME;false;Lead Time
    Characteristic;Z_SUPPLIER_ID;/CCM/ID;false;Supplier Number
    Characteristic;Z_SUPPLIER_NAME;/CCM/NAME;false;Sup Name
    Characteristic;Z_P_GROUP;/CCM/ID;false;Purchasing Group
    Characteristic;Z_P_ORG;/CCM/ID;false;Purchasing Org
    Characteristic;/CCM/CONTRACT_ID;/CCM/ID;false;Contract Number
    Characteristic;/CCM/CONTRACT_ITEM_ID;/CCM/ID;false;Contract Item
    Characteristic;/CCM/PRODUCT_GROUP;/CCM/ID;false;Product Category
    Characteristic;/CCM/PRICE;/CCM/PRICE;true;Price
    Characteristic;Z_DATE;DATE;false;Date
    Characteristic;/CCM/LONG_DESCRIPTION;/CCM/LONG_DESCRIPTION;false;Long Description
    Characteristic;/CCM/PICTURE;/CCM/ATTACHMENT;false;Picture
    Schema;All;Z_ACTION;Z_MATERIAL_TYPE;Z_CONTENT;Z_SUPPLIER_ID;Z_SUPPLIER_NAME;Z_P_GROUP;Z_P_ORG;Z_DATE;All Schema
    Category;10000300;;;ABC
    Category;10000400;;;DEF

  • CCM Catalog Mass upload problem

    Dear Experts,
    Could you please help me to find an answer to the below issue?
    We are doing a mass catalog upload in CCM 2.0 => we are uploading our CSV file as follows:
    Supplier ID A => Supplier name A =>  Item details A
    Supplier ID B => Supplier name B =>  Item details B
    etc.
    Usually, I give the first Supplier ID when creating the Supplier catalog.
    The upload process is working fine, BUT...
    When the catalog has been uploaded, from the Procurement Catalog side there is only the first "Supplier ID A" what's beeing uploaded to all of the items instead of all the other respective Supplier IDs.
    Therefore we have to change the rest of the Supplier IDs by mass changing the respective Proc Cat.
    Do you know how we could keep all the other Supplier IDs?
    Thanks a lot - imre
    Edited by: Imre Matyas on Feb 8, 2010 11:09 AM

    Hi,
    In that case my solution will help.
    Here is sample schema with custom characteristics. Please look at Z_SUPPLIER_ID and Z_SUPPLIER_NAME.
    SAP CATALOG CSV 2.0 <;>
    Defaults;EN
    Model
    Catalog;Master;;Master Catalog
    Characteristic;Z_ACTION;/CCM/NAME;false;Action
    Characteristic;/CCM/PRODUCT_ID;/CCM/ID;false;Part Number
    Characteristic;/CCM/SHORT_DESCRIPTION;/CCM/DESCRIPTION;false;Description
    Characteristic;Z_MATERIAL_TYPE;/CCM/ID;false;Material Type
    Characteristic;/CCM/MINIMUM_QUANTITY;/CCM/MINIMUM_QUANTITY;false;Order Unit
    Characteristic;Z_CONTENT;/CCM/MINIMUM_QUANTITY;false;Content
    Characteristic;/CCM/LEAD_TIME;/CCM/LEAD_TIME;false;Lead Time
    Characteristic;Z_SUPPLIER_ID;/CCM/ID;false;Supplier Number
    Characteristic;Z_SUPPLIER_NAME;/CCM/NAME;false;Sup Name
    Characteristic;Z_P_GROUP;/CCM/ID;false;Purchasing Group
    Characteristic;Z_P_ORG;/CCM/ID;false;Purchasing Org
    Characteristic;/CCM/CONTRACT_ID;/CCM/ID;false;Contract Number
    Characteristic;/CCM/CONTRACT_ITEM_ID;/CCM/ID;false;Contract Item
    Characteristic;/CCM/PRODUCT_GROUP;/CCM/ID;false;Product Category
    Characteristic;/CCM/PRICE;/CCM/PRICE;true;Price
    Characteristic;Z_DATE;DATE;false;Date
    Characteristic;Z_UPDATE_BY;/CCM/ID;false;Updated By
    Characteristic;/CCM/LONG_DESCRIPTION;/CCM/LONG_DESCRIPTION;false;Long Description
    Characteristic;/CCM/PICTURE;/CCM/ATTACHMENT;false;Picture
    Characteristic;Z_BUYER;/CCM/ID;false;Buyer
    Characteristic;Z_BUYER_CONTACT;/CCM/ID;false;Buyer Contact Number
    Schema;Master;Z_ACTION;Z_MATERIAL_TYPE;Z_CONTENT;Z_SUPPLIER_ID;Z_SUPPLIER_NAME;Z_P_GROUP;Z_P_ORG;Z_DATE;Z_UPDATE_BY;Z_BUYER;Z_BUYER_CONTACT;Master Schema
    Regards,
    Masa

  • CCM 2.0 upgrade problem..

    Hi all,
    I have upgrad CCM 1.0 to CCM 2.0. After upgrade while go to Edit catalog: Following Error was coming:
    "Error when reading catalogs; error when reading master catalog".
    So i ran the report: /CCM/INITIALIZE_CME. After that i am facing problem.. in performance..
    It is taking long time and in SLG1 i am able to find out the log as below for each catalog:
    Start the catalog conversion for catalog <Catalog name>
    Reference updated in component /CCM/QUANTITY_VALUE of data type /CCM/PRICE_BASIS_QUANTITY
    Reference updated in component /CCM/AMOUNT of data type /CCM/PRICE
    Reference updated in component /CCM/QUANTITY_VALUE of data type /CCM/MINIMUM_QUANTITY
    Characteristic /CCM/MAN_ACCEPTANCE was created
    Characteristic /CCM/ORIG_CATALOG_ID was created
    Characteristic /CCM/PICTURE was created
    Catalog <catalog name> converted successfully.
    The current version is as below:
    Component version - SRM 5.00
    SRM_SERVER - Release 550, Support pack level SAPKIBKT07
    SAP_ABA - Release 700, Support pack level SAPKA70010
    CCM - Release 200_700, Support pack level SAPK-27007INCCM
    Kernel release - 700
    Please help. Need solution as soon as possible.
    Thanks

    Hi,
    Have you followed the SNOTE 843867:
    The report /CCM/INITIALIZE_CME should be ran once.
    Please consider the given note above.
    with regards,
    mahesh

  • Error while uploading supplier catalog

    Hi,
    We have CCM release 200_700 with support package SAPK-27004INCCM.  While uploading supplier catalog, we get the following errors. Any suggestions please.
    Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORIG_CATALOG_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PARTNER_GUID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PICTURE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRICE_BASIS_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_GROUP - char. was not assigned 
      Value assignment not valid for characteristic /CCM/PRODUCT_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SHORT_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_NAME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/SUPPLIER_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/BASE_UOM - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LEAD_TIME - char. was not assigned 
      Value assignment not valid for characteristic /CCM/LONG_DESCRIPTION - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MINIMUM_QUANTITY - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_ID - char. was not assigned 
      Value assignment not valid for characteristic /CCM/MNFCTR_PART_NO - char. was not assigned 
      Value assignment not valid for characteristic /CCM/ORDER_UNIT - char. was not assigned
    From Support team

    Hi,
    Any suggestions for this thread?
    Regards,
    Support Team

  • Can we setup two sets different 7912 logos in one CCM cluster?

    Hi,
    CCM 4.1(3) cluster within head office. We created the 7912 logo for system default image. However, the remote site 7912 phones, need to use a different logo other than the head office.
    as per http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc5d3d/0#selected_message
    We can create the 7912 logo, but how can we setup two or more different 7912 logos for different sites?
    We noticed on CCM4.1(3), there is idle URL for 7912 phone, what is the callmanager default link for this URL? I am thinking to use different logo file names, and put the related URL on this parameters for remote site 7912 phones.
    Could someone let me know or any other better way to do?
    Thanks,
    JJ

    Hi JJ,
    This should work just the way you have described. Have a look;
    Idle
    Enter the URL that displays on the Cisco IP Phone display when the phone has not been used for the time that is specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.
    Leave this field blank to accept the default setting.
    Idle Timer (seconds)
    Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.
    Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecfc7.html#1121361
    Here how on CCM;
    Method 1:
    Choose System > Enterprise Parameters so that the change is propagated to all of the phones from the Cisco CallManager Administration page.
    In the URL Idle field, enter http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the URL Idle Time field, enter any positive value in seconds.
    Method 2:
    Choose Device > Phone under the Cisco IP Phone configuration so that only this phone displays the graphics from the Cisco CallManager Administrator page.
    Choose the phone/phones on which you want to put the display.
    In the Idle field, enter the path http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the Idle Timer field, enter any positive value in seconds.
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml#topic4
    Hope this helps!
    Rob

  • Remote system CCMS segment not in local segments

    Hi,
    I have configured CCMS agents before but this one is puzzling.
    - downloaded latest CCMS agents sar file for PI systems
    - I have created the csmconf file and placed in the right locations.
    - i started the CCMS agent for PI systems from Visual Admin and it found the csmconf file, i provided the passwords and it  started but the segment name is not in "local segments" in RZ21 in SOlMan (Monitoring: Display technical topology) and therefore i am limited to what i can see in RZ20.
    - i unregistered the agent and started it at OS level with the -j2ee option and gave the passwords and it still did not come under "local segments".
    - the PI systems have remote Databases from which i started the CCMS agents and they do appear under "local segments" and can see them in RZ20.
    - their respective CCMS agent are visible under the PI system's RZ21 "local segments" but as far as i remember from the OS level i did not configure it to register itself with PI itself but only with the CEN which is SolMan.
    in my other solman systems the remote PI CCMS agents and amongst others are all under "local segments" and they all visible in RZ20.
    I want to register the agents for the PI systems so that they appear under the "local segments" tab in solman and i can carry out my monitoring but they do not.
    has anyone else had this problem?
    Thanks,
    Mani

    Hi,
    Please see if these threads help.
    API to load images for
    API to load images for
    Employee Photo Upload in HRMS
    Employee Photo Upload in HRMS
    Dispay employee pictures in Employee Self Service screen
    Dispay employee pictures in Employee Self Service  screen
    Regards,
    Hussein

  • Not able to view catalogs in CCM after clicking on "edit catalog"

    Hi all,
    I am not able to view a single catalog (supplier, procurement or master) in CCM after clicking on edit catalog.
    After clicking on "start" pushbutton, it is giving warning message "Error while editing Master catalog"
    Could anybody tell me, what would be the problem ??
    Thanks in advance.
    Regards,
    Vivek !!
    Edited by: vivek kulkarni on May 26, 2009 12:18 PM

    Hi Jason,
    Thanks for reply and solution.....
    but this problem is only for my user ID and not for all other user ID.
    when we tried with other user IDs, all the catalogs are in green state and working fine. For my ID I am not able to view any catalog into edit catalog screen. When I am trying to search any catalog it is giving me warning message "Error in master catalog". When checked in SLG1 I got error as "catalog (catalog name) not found".
    Is it related to any user setting or like that... as this is the issue with my individual ID.
    Please suggest.
    Thanks !
    Vivek

  • Installation problem CCM 4.0(1)

    I install ccm 4.0(1) on my pc with wins 2000 server plus sql 2000sp3a while install I got error about RPC connection fail duration installation cisco directory.
    please help and ref
    Thank in advance

    This problem is addressed in Cisco bug ID CSCed88931

  • How to add pictures in CCM for items in SRM_EXTRAXTED_CATLG

    Hi guys (and girls of course),
    Best wishes for 2007 for all of you.
    I've got following issue I've been struggling with: I'm trying to add a picture to items in CCM, but for items coming from R3 (replicated to SRM). I want to use the standard PICTURE/URL field for this ('complex' data type)
    (procedure for uploading R/3-materials is currently already working)
    I've been checking out following BADI's:
    <u>/CCM/IF_EX_CTLG_ENRICHMENT~ENRICH_ITEM</u>
    I have found an example for implementing this in another thread and this seems to work for 'simple' characteristics, eg /CCM/CONTRACT_ID as mentioned in the example)
    <u>IF_EX_BBP_CCM_CHAR_MAINT~VALUATE_PRODUCT</u>
    for additional customer-characteristics this works fine, also for simple standard characteristics (eg /CCM/MPN) this works fine.
    But in both cases i seem to be unable to fill the complex characteristic /CCM/PICTURE (subfield /CCM/URL). I tried to use the same syntax as in the CSV-load file (ie /CCM/PICTURE#/CCM/URL) but it's not working as i expect.
    When i add this info manually to the field, the picture shows as expected. (But adding this info manually is not an option of course.)
    Any thoughts or hints would be greatly appreciated.
    Some additional information
    SAP_ABA     700     0009     SAPKA70009
    SAP_BASIS     700     0009     SAPKB70009
    PI_BASIS     2005_1_700     0009     SAPKIPYJ79
    ST-PI     2005_1_700     0001     SAPKITLQI1
    SAP_BW     700     0009     SAPKW70009
    SAP_AP     700     0006     SAPKNA7006
    CCM     200_700     0005     SAPK-27005INCCM
    SRM_PLUS     550     0006     SAPKIBK006
    SRM_SERVER     550     0006     SAPKIBKT06

    Hi ,
    I was not active on SDN for some time hence did not see yr thread.
    We had used SRM_EXTRACTED_CATALOG in our earlier project and managed to get pictures for all the items in shopping.
    The path we took:
    with the report BBP_CCM_TRANSFER_CATALOG get the SRM_EXTRACTED_CATALOG in CAT
    map the relevant categories in SRM_EXTARCTED_CATALOG to /CCM/MASTER_CATALOG.
    import all the picture JPEG files for all the items in the MIME of server
    SE80->MIME repository -> drill down to BSP/SAP/BC/CCM (sorry i don't remember the exact path and I don' t have the system now) -> create yr own folder-> import all the JPEG files to this folder.
    now derive a URL for each item in a format: http:
    server name.domain name\services (sap\bc\bsp\cat\yr folder name\file name)
    validate this URL in IE
    it should derive the picture from the MIME of yr server and show you on screen
    now go to mastrer catalog ->open the chara "image" for each item -> paste this url and type (JPEG) -> and save the item
    this should give picture of each item when you are shopping in EBP as preview and in detail also
    it's somewhat cubersome to paster those URLs but it's one time activity.
    Helpful?
    BR
    Dinesh
    reward if helps

  • Jabber registration issue on CCM 7.1.5

    Hi Guys, I'd like to ask your valuable advice on the following:
    - we're running CCM 7.1.5(b)SU5
    - we installed the following .cop files for Android support (we tried one after the other hoping to get around the problem):
         cmterm-android_8.6.2v17.cop.sgn
         cmterm-android_8.6.2v17b.cop.sgn
         cmterm-android_9.0.1v24.cop.sgn
    - we forced the phone (Samsung Galaxy S GTi9000) to install the following Jabber client (found on CCO together with the above device files for which it should be compatible):
         Release 8.6(5) - Optimus-MR3-aligned.apk
    Unfortunately we had no luck and the phone gets always the 'timeout/check network config' error.
    This is what you see on CCM side:
    12/07/2012 10:51:44.332 CCM|SIPStationD(7,100,169,47), BOTTEST, 10.40.251.125:40916, primaryDN=5011, Registration profile error: Error: DB Config, sending registration reject and closing station|<CLID::CCMSG-Cluster><NID::10.40.11.23><CT::0,0,0,0.0><IP::><DEV::><LVL::Error><MASK::0020>
    ... we followed all the Cisco guidelines to create a suitable device configuration (the same worked like a charm on CCM 8.5).
    I'll attach a CCM trace showing the above error (as you may have guesses, the phone name is 'BOTTEST')
    Thanks a lot !
    - Andrea

    I've been having a real fun time trying to get Jabber for Android working as well.  CUCM version 8.6.2 and Jabber 9.0.
    The trick was to check the box for 'Use Fully Qualified Domain Name in SIP Requests' in the SIP profile you created for Android phones.
    I was connecting to the CUCM, but then it would time out.
    Thanks,
    Richard

  • CUCM 8.6(2) - High CPU utilization - CCM process

    Hello,
    Process name ccm is peacking 91% of CPU utilization in one of Subscribers.
    On cluster there are 1 Pub, 2 Subs, and 2 TFTP.
    CCM service was already restart, and Subs reload, but problem remain.
    We have checked and removed association with phones not registered, but problem remain.
    Proc,PID,CPU,Status,SharedMem,Nice(Level)VmRSS,VMSize,VMData,ThreadCount,DataStackSize,PageFault
    ccm,32687,90,SLEEPING,87380,0,426792,605276,468544,47,418345,744
    VMware Installation:
            1 vCPU: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
            Disk 1: 80GB
            4096 Mbytes RAM
    admin:show process name ccm
      PID  PPID   TID %CPU S COMMAND
    32687     1 32687  0.0 S ccm
    32687     1 19549  0.0 S ccm
    32687     1 19570  0.0 S ccm
    32687     1 19639  0.0 S ccm
    32687     1 20057  0.0 S ccm
    32687     1 20331  0.0 S ccm
    32687     1 20332  0.0 S ccm
    32687     1 20333  0.0 S ccm
    32687     1 20354  0.0 S ccm
    32687     1 20360  0.0 S ccm
    32687     1 20361  0.0 S ccm
    32687     1 23336  0.0 S ccm
    32687     1 23337  0.0 S ccm
    32687     1 23338  0.0 S ccm
    32687     1 23339  1.0 S ccm
    32687     1 23340  0.1 S ccm
    32687     1 23341  0.2 S ccm
    32687     1 23342  0.0 S ccm
    32687     1 23349  0.0 S ccm
    32687     1 23988  0.0 S ccm
    32687     1 23989 21.6 S ccm
    32687     1 23990  0.7 S ccm
    32687     1 24013  0.0 S ccm
    32687     1 24043  0.0 R ccm
    32687     1 24044  0.0 S ccm
    32687     1 24045  0.0 S ccm
    32687     1 24046  0.0 S ccm
    32687     1 24047  0.0 S ccm
    32687     1 24048  0.7 R ccm
    32687     1 24049  0.2 S ccm
    32687     1 24050  0.1 R ccm
    32687     1 24051  0.0 S ccm
    32687     1 24052  0.0 S ccm
    32687     1 24053  0.0 S ccm
    32687     1 24054  0.0 S ccm
    32687     1 24091  0.0 S ccm
    32687     1 24092  0.0 S ccm
    32687     1 24093  0.0 S ccm
    32687     1 24181  0.0 S ccm
    32687     1 24182  0.0 S ccm
    32687     1 24192  0.0 S ccm
    32687     1 24277  0.1 S ccm
    32687     1 24278  0.0 S ccm
    32687     1 24279  0.0 S ccm
    32687     1 24280  0.0 S ccm
    32687     1 24281  0.0 S ccm
    32687     1 24282  0.0 S ccm
    admin:
    Are there any specific tests, or logs prior to isolate this issue?

    Hi,
    A few points:
    > Use one of the recommended OVA templates
    > Check if the spike is random or occurs at a specific time. If it occurs at a specific time it could be coinciding with something like DRS backup, CDR load, busy hours etc.
    > Minimum set of logs needed for one such high CPU spike instance are:
    Detailed ccm traces from all nodes
    RisDC Perfmon logs
    Proglogs
    Also, capture the output of the following:
    utils diagnose test
    utils core active list
    show process load
    HTH
    Manish

  • CME, Call forward to CUE from CCM IP phone

    I want to call forward the call from CCM IP phone to CME ephone's voicemail which setup in CUE. works okay between CME ephones. configured voice service as follows but no luck. what did I missing to implement?
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    no supplementary-service h450.2
    no supplementary-service h450.3
    -CCM4.1.3, configured H225 trunk. leave uncheck the MTP on the trunk device
    -gatekeeper to connect between CCM and CME
    -CME3.3, h323 to gatekeeper and sip to CUE
    -CUE2.1
    Thanks in advance,

    It works by restart the CME router and have a question the sip-ua output. I have two media streams but the 2nd shows "STREAM_IDLE". I think this is for g729 connected to CCM via h323 gk. Can I get an explanation why?
    CME#sh sip-ua calls
    SIP UAC CALL INFO
    Call 1
    SIP Call ID : [email protected]
    State of the call : STATE_ACTIVE (7)
    Substate of the call : SUBSTATE_NONE (0)
    Calling Number : 4083132006
    Called Number : 4211
    Bit Flags : 0x101A0030 0x100000 0x500
    CC Call ID : 95
    Source IP Address (Sig ): 10.253.66.254
    Destn SIP Req Addr:Port : 10.253.66.2:5060
    Destn SIP Resp Addr:Port: 10.253.66.2:5060
    Destination Name :
    Number of Media Streams : 2
    Number of Active Streams: 1
    RTP Fork Object : 0x0
    Media Stream 1
    State of the stream : STREAM_ACTIVE
    Stream Call ID : 95
    Stream Type : voice-only (0)
    Negotiated Codec : g711ulaw (160 bytes)
    Codec Payload Type : 0
    Negotiated Dtmf-relay : inband-voice
    Dtmf-relay Payload Type : 0
    Media Source IP Addr:Port: 10.253.66.254:16998
    Media Dest IP Addr:Port : 10.253.66.2:16904
    Orig Media Dest IP Addr:Port : 0.0.0.0:0
    Media Stream 2
    State of the stream : STREAM_IDLE
    Stream Call ID : -1
    Stream Type : voice+dtmf (1)
    Negotiated Codec : No Codec (0 bytes)
    Codec Payload Type : 255 (None)
    Negotiated Dtmf-relay : inband-voice
    Dtmf-relay Payload Type : 0
    Media Source IP Addr:Port: 10.253.66.254:17120
    Media Dest IP Addr:Port : 0.0.0.0:0
    Orig Media Dest IP Addr:Port : 0.0.0.0:0
    Number of SIP User Agent Client(UAC) calls: 1
    SIP UAS CALL INFO
    Number of SIP User Agent Server(UAS) calls: 0
    CME#sh sccp connections
    sess_id conn_id stype mode codec ripaddr rport sport
    1 2 xcode sendrecv g711u 10.253.66.254 2000 16518
    1 1 xcode sendrecv g729 10.253.66.254 2000 17620
    Total number of active session(s) 1, and connection(s) 2

  • Having a few issues with several programs (tor / mpd / ccm..)

    Hey everybody,
    I'll arrange this post in 3 parts since I have 3 different kinds of "major" problems or questions .
    1st ( tor - privoxy - polipo - iptables )
    I somehow found this article in your wiki and therefore tried to get tor and privoxy up and running on my desktop machine, as this didn't work as I hoped it would I searched farther in the wiki and installed and configured (as far as I've thought of) polipo and iptables.
    Now I've put all 4 of them in my rc.conf, but somehow some of my http connections don't seem to work in chromium while iptables is running (https works fine though [e.g. archwiki works, youtube doesn't]).
    I did everything as suggested in the polipo wiki entry, meaning I changed my /etc/iptables/iptables.rules to
    *nat
    :PREROUTING ACCEPT [0:0]
    :POSTROUTING ACCEPT [0:0]
    :OUTPUT ACCEPT [0:0]
    -A OUTPUT -p tcp --dport 80 -m owner --uid-owner polipo -j ACCEPT
    -A OUTPUT -p tcp --dport 80 -j REDIRECT --to-ports 8123
    COMMIT
    and removed all proxy settings from my browser - meaning all corresponding flags in the startcommand. I also added "forward / localhost:8123" to the privoxy config and changed the polipo configuration according to the wiki in order to work with tor (the socksParentProxy, socksProxyType part).
    now the next problem - that might probably be related to the first - is that my privoxy doesn't load in daemon mode anymore.
    I think it's since I've installed polipo that privoxy began to refuse starting together with the other daemons
    [usR@machine ~]$ privoxy
    Apr 23 00:20:56.459 b75086c0 Fatal error: can't check configuration file '/home/usR/config': No such file or directory
    this is the output I get when I try to start privoxy in normal user mode from the terminal, when I try starting the daemon manually (/etc/rc.d/privoxy start) it says
    touch: cannot touch `/var/log/privoxy/logfile': Permission denied
    chgrp: cannot access `/var/log/privoxy/logfile': Permission denied
    chmod: cannot access `/var/log/privoxy/logfile': Permission denied
    touch: cannot touch `/var/log/privoxy/jarfile': Permission denied
    chgrp: cannot access `/var/log/privoxy/jarfile': Permission denied
    chmod: cannot access `/var/log/privoxy/jarfile': Permission denied
    Apr 23 00:22:34.490 b76396c0 Fatal error: Cannot setgid(): Insufficient permissions.
    [/var/log/privoxy belongs to privoxy:adm]
    when I do the same in sudo mode it just fails without displaying an error message..
    I added this code to the /etc/rc.d/privoxy executable but I still get this owner conflict error and I have no idea what might be causing it.
    if [ ! -d /var/log/privoxy ]
    then
    mkdir /var/log/privoxy
    touch /var/log/privoxy/errorfile
    touch /var/log/privoxy/logfile
    chown -R privoxy:adm /var/log/privoxy
    fi
    If the order of the daemons in rc.conf is of any real importance here a copy of my setup
    ( @polipo @privoxy @syslog-ng !set-hw-addr !iptables @network netfs hddtemp @crond hal dbus @alsa @slim @tor )
    2nd ( mpd & mpc )
    I'm just wondering if there's a way to output the position of a track in the current playlist combined with a search. since mpc search <type> <query> only prints out full file path and name, but not the position in the playlist so that you could play it with mpc play. I thought of a method to print out the whole list with mpc playlist and pipe this output into a listing program, than grep out the song I'm looking for all that in a little bash script, to replace mpc search.
    Is there an integrated mpc search function that works the way I imageine it and my idea therefore redundant, or if not, is it realizable the way I picture it; does such a listing program exist?
    3rd ( cairo-compmgr )
    Since I'm already posting here I thought I'd mention my older problem which I  still couldn't solve.
    1st) I need to start cairo-compmgr(-git) in sudo mode to be able to edit any settings or activate the gui in any way. how do I automatically start the program on startup in sudo mode? I tried editing ~/.fluxbox/startup & ~/.fluxbox/init, even tried adding it in /etc/rc.d/ and /etc/rc.conf in order to start it as a daemon (lol, noob) but none of that worked properly obviously Any ideas? I don't want to start it manually and "waste" a terminal window for that every time I boot.
    2nd) I can change opacity (transparency) in both versions only per hotkey, and when I do so the settings don't get saved, they even get reset to normal opacity as soon as another window gets selected. does anybody know if there's a config file or any way to save opacity settings for certain windows & programs, so that they automatically get loaded when cairo starts and stay applied until it gets closed?
    [or generally: how do I configure the Plugins? ]
    the last "problem" which occurs only with cairo-compmgr-git:
    When I rightclick the ccm icon in the task bar and disable the composite desktop, the whole program kills itself oO
    In the old version the option "Composite desktop"'s box just got un-checked and I could easily restart ccm by rightclicking the logo again and re-enabling the "Composite desktop" option.
    Any clues on that by any chance?
    I'm using Fluxbox by the way, if that's of any importance for any of the problems. hope I didn't forget any important information if so please remind me
    Would be thankful for any kind of help
    have a nice weekend
    deF
    //edit:
    concernig the tor / privoxy problem, I managed getting all the daemons to start up at bootup again, my iptables situation remains the same though.
    I went through all the config files again and played around with chown and chmod a little and for now the system is stable, everytime I reboot all the daemons start without any problems.
    but when i start chromium with --proxy-server=localhost:8118 now, I get the following error message
    The following error occurred while trying to access http://torcheck.xenobite.eu/index.php?:
    504 Connect to torcheck.xenobite.eu:80 failed: SOCKS error: network unreachable
    Generated Sat, 23 Apr 2011 04:49:08 CEST by Polipo on archzor.localdomain:8118.
    notably with all programs running now, tor, polipo, privoxy (and by now dansguardian as well)..
    I'm tired so I'll go asleep now, maybe I'll find something tomorrow in the logfiles or whatever, so far:
    every kind of help is still very appreciated
    ²
    /var/log/polipo/polipo.log
    Disabling disk cache: No such file or directory
    Couldn't bind: Address already in use
    Couldn't establish listening socket: Address already in use
    Couldn't bind: Address already in use
    Last edited by deF291 (2011-04-23 03:13:48)

    okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
    anyway, problem 2 and 3 are still to be solved.
    and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
    //e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
    Last edited by deF291 (2011-04-23 16:16:31)

Maybe you are looking for

  • Setting up a second ipod on same computer

    I have a fifth gen ipod and when I connect to the computer itunes comes up and any new stuff I've downloaded is syched to my ipod. Now, a family member got her own ipod shuffle. When we go to set it up on the computer, is there a way to do it so she

  • Is there a way I can have more than one tab of the same website open?

    It seems kind of silly that I'm not allowed to turn off the feature where it switches to the tab that is already open of that site, even if it is in a different window. Sometimes I need to have duplicates of a site open, like alarm clocks, or certain

  • Solution for Windows users who repeatedly get "iPod in Recovery Mode".

    If you are repeatedly receiving this message using iTunes 7 on Windows when connecting your Nano (it may be with other models, I can't test that), Windows may be assigning a drive letter that is already in use. This is particularly common for network

  • Correct Data is not shown while opening Input Schedule

    Hi I am facing this issue almost in every template i create After saving data in a particular template in an input schedule, i reopen the template from the dynamic templates library(etools -> open dynamic template) But the data saved previously does

  • Information regarding Adobe forms

    Dear Gurus, I need some basic information regarding adobe forms to be used in ESS MSS portal for doing some basic actions by managers like hiring/maintenance of data for his subordinates. Are there any specific system requirements so that adobe forms