Ccm upgrade from 6.1
Hi;
I want to upgrade his ccm 6,1 to the newest,
what must be have to do this upgrade???
thanks
Hi
Overall you have to do following
1) See if you hardware support the new release or not.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html
If not you will have to purchase new hardware or else you can use old hardware for new CUCM release.
2) Since this is major upgrade you will have to use new licenes also.
3) Direct upgrade from 6.1.4 is allowed till CUCM 9.0. So of you are running 6.1.4, you can upgrade to CUCm 9.x in single step.
You will find exact step in relesae notes of the release which you want to upgrade to.
Regards
Ronak Patel
Rate helpful posts.
Similar Messages
-
CCM Upgrade from 5.1.3 to 6.1.2
I want to know if I can upgare Call Manager from 5.1.3 to 6.1.2. Is this possible or I have to from 5.1.3 to 6.0 and then from 6.2 to 6.1.2.
Please let me know and also if any one know where to down the software from Cisco, please send me the link.
I downloaded the software, but that is from 6.0 to 6.1.2
Thanks!!!Hi Rohan,
Both of these upgrades will require you to order the Media Kits and License via PUT;
Upgrade Paths To Cisco Unified Communications Manager 6.1(2)
You can upgrade directly to Cisco Unified Communications Manager 6.1(2) from:
â¢4.2(3x)
â¢5.1(2x)
â¢5.1(3x)
â¢6.0(1a)
â¢6.1(1x)
Caution: Use the ISO files that are mentioned in the "Upgrading from Cisco Unified Communications Manager Release 6.0.(1a) or higher to Release 6.1(2) by Using the UCSInstall File" section for upgrades from 6.1(1x)only.
Upgrading from Unified CM 4.x and 5.x
If you are upgrading from 4.1.3, 4.2.3, 5.1.1, 5.1.2, or 5.1.3, use the Product Upgrade Tool (PUT) or the PUT that is for registered customers only to obtain a media kit and license or to purchase the upgrade from Cisco Sales.
To use the PUT, youmust enter your Cisco contract number (Smartnet, SASU or ESW) and request the CD/CD set. If you do not have a contract for Cisco Unified Communications Manager, you must purchase the upgrade from Cisco Sales.
For more information about supported Unified CM upgrades, see the Cisco Unified Communications Manager Compatibility Matrix at the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_device_support_tables_list.html
From these good release notes;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_2/cucm-rel_note-612.html#wp396032
Upgrade Paths To Cisco Unified Communications Manager 6.1(1b)
It is possible to upgrade directly to Cisco Unified Communications Manager 6.1(1b) from:
â¢4.1(3x)
â¢4.2(3x)
â¢5.1(1x)
â¢5.1(2x)
â¢5.1(3x)
â¢6.0(1x)
â¢6.1(1x)
Caution: Use the iso files mentioned in the "Upgrading from Cisco Unified Communications Manager Release 6.0(1a) or 6.1(1a) to Release 6.1(1b) Using the UCSInstall File" section for upgrades from 6.0(1a) or 6.1(1a) to 6.1(1b) only.
Upgrading from CUCM 4.x and 5.x
If you are upgrading from 4.1.3, 4.2.3, 5.1.1, 5.1.2, or 5.1.3, use the Product Upgrade Tool (PUT) or the PUT for registered customers only to obtain a media kit and license or purchase the upgrade from Cisco Sales.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_1/cucm-rel_note-611b.html#wp253846
Hope this helps!
Rob -
Consult Transfer problem after CCM upgrade from 3.3.4 to 4.1.3
I upgraded a CCM Cluster installed into a main site. In addition there is a branch office WAN connected by an MPLS Link with the main site; the branch is connected to PSTN using a Voice Gateway H323. The upgrade was perfomed from 3.3.4.sr2 to 4.1.3sr3a.
Now there are problems with consult transfer only on the branch office; main site don't is affected by the problem.
It's really strange because it occurs for 50% of the time, sometimes it works fine ..
To better explain the problem:
when a user receive a call from PSTN or from another phone (into same region or remote) and want to transfer to another collegue he press "transfer softkey", talk with the collegue and when he try to transfer the call "transfer softkey" appear disabled. If he transfer the call without consult the call is transferred correctly.
Later I have unistalled the 4.1.3 sr3a and installed 4.1.3 sr2 but nothing is changed
Someone can help me ?Hi Brent,
Do you perhaps have "on hook" transfer enabled? With this enabled you don't need to press the Transfer key a second time to complete the transfer.Have a look:
When on-hook transfer is enabled, you can either hang up or press Trnsfer, then hang up.
If on-hook transfer is not enabled on your phone, be aware that hanging up instead of pressing Trnsfer cancels the transfer action and places the party to be transferred on hold.
Onhook Call Transfer
Modifications to the Call Transfer feature add the onhook (hangup) action as a possible last step to complete a call transfer. The Transfer On-hook Enabled service parameter, which enables onhook call transfer, must be set to True for onhook call transfer to succeed. If the service parameter is set to False, the onhook action ends the secondary call to the third party.
In the existing implementation, if user B has an active call on a particular line (from user A) and user B has not reached the maximum number of calls on this line, the Cisco IP Phone provides a Transfer softkey to user B. If user B presses the Transfer softkey (or Transfer button, if available) once, user B receives dial tone and can make a secondary call: user B dials the number of a third party (user C). Cisco CallManager provides a Transfer softkey to user B again. If user B presses the Transfer softkey again (or Transfer button, if available), the transfer operation completes.
With the new onhook call transfer implementation, user B can hang up after dialing user C's number, and the transfer completes. Both the existing and new implementations work in both the case of a blind transfer (user B disconnects before user C answers) and also in the case of a consult transfer (user B waits for user C to answer and announces the call from user A).
The previous implementation remains unchanged: user B can press the Transfer softkey twice to complete the transfer.
From this doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edb46.html#wp1088627
Hope this helps!
Rob
Please remember to rate helpful posts........... -
Problem in upgrading from CUCM 8.5.1 to CUCM 8.6.2
Unable to upgarde cucm 8.5 to 8.6 ,
installed referesh upgrade cop file . tried on SFTP and using local DVD same below error displayed . Any one have any solution please share .
Installation Status
File
UCSInstall_UCOS_8.6.2.21900-5.sgn.iso
Start Time
Mon Dec 10 14:31:47 GST 2013
Status
Error encountered: An unknown error occurred while accessing the upgrade file.
12/10/2013 13:44:37 file_list.sh|Starting file_list.sh|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument dest_file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Calling SFTP command with metering off|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|SFTP command complete (0)|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|List file (pre-filtered):|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) ciscocm.refresh_upgrade_v1.1.cop.sgn|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|/opt/cisco/install/bin/filter file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|Parse argument file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|No patch type specified. Optional.|<LVL::Debug>
12/10/2013 13:44:38 filter|No upgrade mode specifed. Optional.|<LVL::Debug>
12/10/2013 13:44:43 filter|Processing filter candidate names|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "UCSInstall_UCOS_8.6.2.21900-5.sgn.iso"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|INorOUT=IN UCSInstall_UCOS_8.6.2.21900-5.sgn.iso: Filter passed.|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "ciscocm.refresh_upgrade_v1.1.cop.sgn"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern Signed Standard upgrade patch file (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop\.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter|INorOUT=IN ciscocm.refresh_upgrade_v1.1.cop.sgn: Filter passed.|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|List file (post-filtered):|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <?xml version="1.0" encoding="UTF-8"?>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="patch" secure-file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" version="8.6.2.21900-5" file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="cop" secure-file="ciscocm.refresh_upgrade_v1.1.cop.sgn" version="0.0.0.0-0" file="ciscocm.refresh_upgrade_v1.1.cop" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) </InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|success|<LVL::Info>
12/10/2013 13:44:45 file_list.sh|file_list.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Starting upgrade_validate_file.sh|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Get //UCSInstall_UCOS_8.6.2.21900-5.sgn.iso size via sftp|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Size of file obtained from sftp is 4793341952|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Total space needed is 9586683904|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Check free space|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|There is enough space on device to proceed.|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Free space : 25916985344|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Space needed : 19827077120|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Remote SFTP request complete (0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|success|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|upgrade_validate_file.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|Unmount DVD|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Starting upgrade_get_file.sh|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:45:08 upgrade_get_file.sh|source_dir=/, dest_file=/common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Starting SFTP|<LVL::Debug>
12/10/2013 14:29:34 upgrade_get_file.sh|Mount /common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso on /mnt/source|<LVL::Info>
12/10/2013 14:29:34 upgrade_get_file.sh|Download of iso file RTMTStart|<LVL::Notice>
12/10/2013 14:29:34 upgrade_get_file.sh|Create md5 "/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso.md5"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|MD5(/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso)= e8:da:df:9a:3a:61:ee:27:4d:c5:4f:7b:77:78:bc:f1|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Create md5 complete|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|Authenticate file "/common/download/8.6.2.21900-5/checksum_file.sgn"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|File authentication complete|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|authenticating ISO name, filename=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, isoname=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Download of iso file RTMTFinish|<LVL::Notice>
12/10/2013 14:30:49 upgrade_get_file.sh|Checking for preflight script|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Executing preflight script: /mnt/source/Cisco/install/bin/preflight isolocation=/mnt/source|<LVL::Info>
12/10/2013 14:30:49 preflight|Starting preflight|<LVL::Info>
12/10/2013 14:30:49 preflight|Validate preflight data|<LVL::Info>
12/10/2013 14:30:49 preflight|Preflight data validation complete|<LVL::Info>
12/10/2013 14:30:49 preflight|Determine upgrade type|<LVL::Info>
12/10/2013 14:30:50 preflight|Active RH version = 4AS|<LVL::Debug>
12/10/2013 14:30:50 preflight|New os version(xml) = 5Server|<LVL::Debug>
12/10/2013 14:30:50 preflight|HW model = VMware|<LVL::Debug>
12/10/2013 14:30:50 preflight|Upgrade type = RU|<LVL::Debug>
12/10/2013 14:30:50 preflight|Obtain product type|<LVL::Info>
12/10/2013 14:30:53 preflight|Obtained product type CallManager|<LVL::Info>
12/10/2013 14:30:53 preflight|Processing preflight install mode|<LVL::Info>
12/10/2013 14:30:53 preflight|Set preflight cancel utility|<LVL::Info>
12/10/2013 14:30:53 preflight|Execute install preflight commands for CallManager:RU from /mnt/source/Cisco/install/preflight.xml|<LVL::Info>
12/10/2013 14:30:53 preflight|Found 10 preflight commands to execute|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (1/10): mkdir -p /common/preflight/CM/RU|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (2/10): cp -f /usr/local/platform/conf/dynamicConfig.xml /common/preflight/CM/RU/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/platform/conf/dynamicConfig.xml': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (3/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp /common/preflight/CM/RU/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (4/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp /common/preflight/CM/RU/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (5/10): cp -f /mnt/source/Cisco/install/dynamicConfig_RU.xml /usr/local/platform/conf/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (6/10): mkdir -p /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (7/10): cp -f /mnt/source/Cisco/install/dynamic_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (8/10): cp -f /mnt/source/Cisco/install/install-confirm-content_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (9/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/dynamic_RU.jsp dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Source dir/file = /mnt/source/Cisco/install/dynamic_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Destination file name = dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Execute preflight command (10/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/install-confirm-content_RU.jsp install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Source dir/file = /mnt/source/Cisco/install/install-confirm-content_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Destination file name = install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Exiting with result 0|<LVL::Info>
12/10/2013 14:30:54 upgrade_get_file.sh|preflight rc=0|<LVL::Debug>
12/10/2013 14:30:54 upgrade_get_file.sh|Preflight completed successfully|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|success|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|upgrade_get_file.sh complete (rc=0)|<LVL::Info>
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes done
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling inactive side processes
12/30/2014 14:31:50 sd_cancelInstall.sh|Canceling inactive side processes done
12/10/2013 14:31:55 upgrade_install.sh|Starting Upgrade -- upgrade_install.sh|<LVL::Info>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/usr/local/platform/bin/startcsa status|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|(CAPTURE) Cisco Security Agent is running with pid 23124|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/etc/init.d/ciscosec stop|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|(CAPTURE) Stopping ciscosec: [ OK ]|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|Upgrade the system|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Start upgrade manager|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|/common/download/8.6.2.21900-5/upgrade_manager.sh type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Cleanup data from a prior upgrade attempt|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /grub/boot/grub/grub.conf.recovery|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate upgrade partition|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Clean up rpm any stale __db. files in rpmdb on the to side|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any master RPM from /partB|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /partB/etc/opt/cisco/install.conf|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate any product configuration file|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|upgrade_type="upgrade"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|L2 upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Calling "source /mnt/source/Cisco/install/bin/install_func"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check for Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check if /mnt/source/upgradeConfig.xml exists|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Checking RedHat release version (4AS, 5Server)|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initiate Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Copy /mnt/source/Cisco/install/bin/refresh_upgrade to /common/download/8.6.2.21900-5/refresh_upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Check that /common/download/8.6.2.21900-5/refresh_upgrade exists and is executable|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Calling exec /common/download/8.6.2.21900-5/refresh_upgrade type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|No 'to' version specified. Extracting it from base path.|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|NEW_VERSION updated to 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Refresh Upgrade Starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|IOWAIT monitor starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Checksum the upgrade source on /mnt/source|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Calling sha1sum -c /common/download/8.6.2.21900-5/checksum_file|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Checksum complete|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize staging area|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize globals for hard drive|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Calling rm -rf /common/refresh_upgrade /common/component|<LVL::Debug>
12/10/2013 14:34:23 refresh_upgrade|Copy /mnt/source to /common/refresh_upgrade|<LVL::Info>
12/10/2013 14:34:23 refresh_upgrade|Execute find /mnt/source and cpio to /common/refresh_upgrade. This may take several minutes.|<LVL::Debug>
12/10/2013 14:37:31 refresh_upgrade|Copy source files to staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Initialize staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Prepare Refresh Upgrade support directory|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Make /common/mnt/product_img mount point|<LVL::Info>
12/10/2013 14:37:32 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup support directories|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling mkdir -p /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Create /common/cisco link to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/download/8.6.2.21900-5/Cisco /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Copy files from /common/refresh_upgrade/images/product.img to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling mount /common/refresh_upgrade/images/product.img /common/mnt/product_img -o loop|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/iproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/iproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihardware.sh /common/download/8.6.2.21900-5/Cisco/bin/ihardware.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihistory.sh /common/download/8.6.2.21900-5/Cisco/bin/ihistory.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/xproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xcomponent.sh /common/download/8.6.2.21900-5/Cisco/bin/xcomponent.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xplatformconfig.sh /common/download/8.6.2.21900-5/Cisco/bin/xplatformconfig.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/install_emailer /common/download/8.6.2.21900-5/Cisco/bin/install_emailer|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/component_install /common/download/8.6.2.21900-5/Cisco/bin/component_install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup install information in /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/refresh_upgrade/Cisco/install /common/download/8.6.2.21900-5/Cisco/install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Setting up cisco specific enviroment|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|PATH=/common/download/8.6.2.21900-5/Cisco/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/home/sftpuser:/root/.security|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|LD_LIBRARY_PATH=/common/download/8.6.2.21900-5/Cisco/lib:/opt/cisco/install/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|PYTHONPATH=/common/download/8.6.2.21900-5/Cisco/python:/usr/local/cm/lib:/usr/local/cm/lib:/usr/local/cm/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_CONF_PATH=/common/download/8.6.2.21900-5/Cisco/install/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_BIN_PATH=/common/download/8.6.2.21900-5/Cisco/bin /opt/cisco/install/bin /usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_PLATFORMCONF_PATH=/common/cisco /usr/local/platform/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_LIB_PATH=/usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Set logging globals for upgrade|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Before: ILOG_CONTEXT="Upgrade", ILOG_FILE="/var/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/var/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|After: ILOG_CONTEXT="Upgrade", ILOG_FILE="/common/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/common/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Initialize APIs|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Initializing the product API|<LVL::Info>
12/10/2013 14:37:37 refresh_upgrade|Initializing the hardware API|<LVL::Info>
12/10/2013 14:37:38 ServerApiManager|INITIALIZE: sam_legacy_mode_init=1|<LVL::Debug>
12/10/2013 14:37:46 ServerApiManager|INITIALIZE: sam_hssi_mode_init=0|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initializing the history log API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xplatformconfig API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xproduct API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "source /common/download/8.6.2.21900-5/Cisco/install/setup/utils.sh"|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions complete|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Getting deployment ID from active side|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Copy /usr/local/platform/conf/platformConfig.xml to /common/cisco/platformConfig.xml|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "cp /usr/local/platform/conf/platformConfig.xml /common/cisco/platformConfig.xml"|<LVL::Debug>
12/10/2013 14:37:48 refresh_upgrade|Check if the upgrade is allowed|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Validate hardware for the upgrade|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Hardware is supported for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate hardware for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Hardware is supported for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate from version 8.5.1.10000-26|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Upgrade from 8.5.1.10000-26 allowed|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate free space for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|(CAPTURE) Free space: 26040668160, Needed space: 15014745300|<LVL::Debug>
12/10/2013 14:37:50 refresh_upgrade|Free space validation complete|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Run component export scripts|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xproduct.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xcomponent.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xplatformconfig.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument export|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument mode=refresh-upgrade|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument install_root=/common/refresh_upgrade/Cisco|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument data_root=/common|<LVL::Debug>
12/10/2013 14:37:50 component_install|Run component export scripts, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "to" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "to" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "from" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "from" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize ucos "to" side version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucos available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucos|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucos export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucos export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Building the command list for ucos is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTStart|<LVL::Notice>
12/10/2013 14:37:51 component_install|Execute commands in the command list for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|No commands to execute for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:51 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucplatform available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucplatform|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucplatform export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Add "security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Building the command list for ucplatform is complete|<LVL::Info>
12/10/2013 14:37:52 component_install|Command execution for ucplatform component RTMTStart|<LVL::Notice>
12/10/2013 14:37:52 component_install|Execute commands in the command list for ucplatform component|<LVL::Info>
12/10/2013 14:37:52 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:52 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare|<LVL::Debug>
12/10/2013 14:37:52 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Parse arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Validate arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Initialize global variables|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Handle Security Information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export security information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export /etc/shadow file|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export login warning message|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export SFTP data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export DRF data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export CCM Service Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export IPSec Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|get_fips_status returning partB fips_cnf as 0|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Racoon Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Tomcat Data|<LVL::Debug>
12/10/2013 14:37:53 security_prepare|security information prepare successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Handle password information|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Export password information|<LVL::Info>
12/10/2013 14:37:53 password_migrate|Calling mkdir -p /common/component/ucplatform/etc/pam.d|<LVL::Info>
12/10/2013 14:37:53 password_migrate|password information migrate successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 platform_certs_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export platform certificates|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|exporting certmon config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform/config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|copy /usr/local/platform/conf/certMonitorConfig.xml /common/component/ucplatform/conf/|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export bulk sftp config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|sftp config not available|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|platform certificates migrate successful|<LVL::Info>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 servm_export|Start servm Export processing|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/activate.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/services.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|SUCCESS: servm Export processing completed|<LVL::Info>
12/10/2013 14:37:56 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:56 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate|<LVL::Debug>
12/10/2013 14:37:56 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Export network configuration files to /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/common|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copy network configuration files|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network-scripts/ifcfg-eth0 to /common/component/ucplatform/etc/sysconfig/network-scripts/ifcfg-eth0|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network to /common/component/ucplatform/etc/sysconfig/network|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/hosts to /common/component/ucplatform/etc/hosts|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying /etc/resolv.conf to /common/component/ucplatform/etc/resolv.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying //etc/nsswitch.conf to /common/component/ucplatform/etc/nsswitch.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copy network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 network_files_migrate|Export network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:57 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Component ucplatform_cluster available on active side|<LVL::Debug>
12/10/2013 14:37:57 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Build the command list for ucplatform_cluster|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Build ucplatform_cluster export phase commands|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster export element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster script element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Add "platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Building the command list for ucplatform_cluster is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform_cluster component RTMTStart|<LVL::Notice>
12/10/2013 14:37:57 component_install|Execute commands in the command list for ucplatform_cluster component|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:58 platform_sso_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component thirdparty available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for thirdparty|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build thirdparty export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing thirdparty export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for thirdparty is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component serviceability_core available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for serviceability_core|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build serviceability_core export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing serviceability_core export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for serviceability_core is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component database available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>hi gupta ,
admin:run sql car select * from tbl_event_log
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDr iver;)
admin:run sql car select * from tbl_system_preferences
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDriver;)
restarted the below sevices
Cisco CDR Agent
Cisco Database Layer Monitor
Cisco CDR Repository Manager
Cisco CAR Scheduler
Cisco SOAP - CDRonDemand Service
Cisco CAR Web Service
while accessing cdr reporting showing below error .
------------------------------------------WARNING-----------------------------------------
* Cluster wide parameter 'Call Diagnostics Enabled flag' is set to false. Hence no QoS information will be generated on calls. If required, please configure the same from service parameter page for Call Manager service.
* Problem in determining 2M/HWM breach status. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Tbl_System_Preferences table is corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Problem in determining Loader Configuration. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
-------------------------------------------NOTICE------------------------------------------
* Problem in determining Billing Tables status. Please check the CAR DB for tables Tbl_Billing_Data and Tbl_Billing_Error.
* Problem in getting the Mail parameters. It might result in mails/alerts/notifications not been sent to CAR Administrators. Please configure this at CAR->System->System Parameters->Mail Parameters.
* Mail id for 'ccmadmin' is not available. CAR Reports/Notifications/Alert Emails might not be able to sent to this user properly. Please configure a mail id in end user configuration page.
if we apllied Restore Defaults ,geting below error
Error Code
Error Description
30029
Direct access to this screen is not allowed.
and try to access system and data base , getting below error
Error Code
Error Description
10012
Database Error. Contact System Administrator.
Does any other way to avoid cdr and do the istallation . -
Upgrading from EBP 3.1 to EBP 5.0
We are running EBP 3.1 and plan to upgrade to EBP 5.0.
Current EBP details:
EBP 3.1 SR1 BBPCRM Support package 14
ITS 610
Requisite Bugseye 3.5
Backend R/3 version: 4.7 SR1 extension set 2
Backend PI version: 2004_1_470
Using blended-codepage: eurojapan
Target release:
EBP 5.0 on WAS 640
Requisite Bugseye 4.0
Questions:
1- Can Requisite Bugseye 4.0 be installed on WAS 640 (on the same server as the EBP 5.0)?
2- What codepage is recommended for EBP when the backend R/3 is using eurojapan blended code page setting?
I am looking for lesson learned and problems encountered during implementation and upgrade from an infrastructure point of view.
Thanks,
AsifAsif,
You must be using Ebp 3.0 or Ebp 3.5.
Requisite products will not be supported by SAP after December 2006. You should consider migrating to SAP CCM.
You will see several discussions on CCM on how to get more information in this forum. You can also look in the service marketplace under SRM 4.0
CCM can be installed as an "add-on" on the same SRM Server as a low TCO option. Can reside on a separate Server for production system for performance reasons (if you have lot of items)
Hope this helps.
Kind Regards, Suresh. -
Upgrade from EBP 4.0 to SRM 5.0
Hi y'all,
We are thinking about upgrading from our current EBP 4.0 to SRM 5.0. We are only using EBP for the self-service procurement scenario - with a classic integration towards two different R/3 4.6C systems. We have no internal catalogs and it is very much a standard set-up
Has anyone had some <b>experiences to share?</b>
Will it be a "large" or a "small" upgrade?
Are there any watchouts or learnings?
Many thanks in advance
Thygehello Thyge,
you are running on EBP 4.0, i.e. SRM 3.0: Extension of mainstream maintenance was extended from end of June 2006 to end of December 2006, at no extra fee.
Requisite 4.0 will be supported to end of December 2006 (refer to SAP Note 485884 for detailed information on Requisite).
That means that, excpet if you go in a custom support contract with SAP, your system will not be supported at end of 2006.
So you must "be prepared" and do this upgrade in 2006 !!!
If you don't use new features, have only 20 users, and a nearly standard SRM, you upgrade efforts will be really light:
- technical upgrade (attention: new Oracle version required) Unicode version ?
- nearly no custom dev alignement
- light re-training
The main workload would be the migration from Requisite to SAP CCM 2.0 (if you choose this option), depending on your actual content management strategy.
I think a 3 months upgrade project will be the correct duration for you.
Rgds
Christophe -
Problems Upgrading from BO XI to BO XI 3.0
I attempted an upgrade from Business Objext XI (Crystal Enterprise Server) to XI 3.0. The install went fine until it got to the registering modules, which took hours and hours. It errored out that the CMS service was not running and could not continue. I looked at all the services and they are all disabled. The onlything running is the upgraded Tomcat Server.
Looking in the Central Configuration Manager for XI 3.0 Tomcat is the only thing listed. No other services....where do I go from here?
I reran the install and chose Repair, it ran through like it ran and got to Finish, but still nothing.
Help, what do I do?
Thanks,
Mark W.That's XIR1, there is no upgrade option.
The SIA in XI 3.0 replaced the other services and now runs everything as child propcesses so in the CCM you only see the SIA (Server Intelligence Agent)
If it's missing you should be able to add it, and it should create the other processes for you when you do.
There's questions as to whether or not 3.0 and XIR1 can be installed side by side, is that what you have done? or is it on another server?
Since you are XIR1 you should install 3.0 on a clean server and then migrate via import wizard (in the program files BO group). If you get stuck then open an incident with support.
Regards,
Tim -
I am looking at upgrading from 4.0 sp4 patch 9 to 4.1
if download and run anything like SBOP BI Platform Servers 4.1 SP02 Patch5 - Update i get an error that i don't have the correct version of bi platform installed. What do i have to download to update from 4.0 to 4.1.
should i download and install
SAP BusinessObjects BI Platform Servers 4.1 SP02 - Update (just the Update without a patch)
and then add patches?
also:
I am assuming that as long as i don't need the added functionality provided I can skip the steps below correct?
http://scn.sap.com/docs/DOC-48364
the main feature we are looking to add is smart view from BI4.0 SP05 and i just want to make sure that will be avialable without having to remove the origional install.Hi,
When you are going from 4.0 to 4.1 you need to download the "patch" update to the Support Pack (SP) you are going to in 4.1
That is to say, the downloads are broken into Full Installs and Patches / updates. Additionally we have Patches to those SPs.
So if you are going from BI 4.0 SP 04 Patch 4.9 to BI 4.1 SP 02 Patch 2.5 then you have to first install the 4.1 SP02 patch update to 4.0 and then apply Patch 2.5 update to the platform.
One thing to note - what DB are you currently using? If it's the one provided with the product, this DB has changed between these versions. 4.0 pre SP05 had DB2 on Unix and MSSQL on Windows. As of SP05 we've moved the SAP SQLAnywhere.
This can cause problems if you "repair" the installation - something support will recommend for a lot of different reasons and when it does this, it will remove the DB2 or MSSQL installation. The repair basically un-installs and re-installs the application. During the install part of the repair it will install SQLAnywhere once again, but the repository will be in your old DB (which isn't installed anymore) and that can give problems.
My recommendation IF you are running the provided DB is that AFTER you install the upgrade you migrate the data and connection of the CMS Repository from the old CMS repository database, to the new database provided. You can do this with the CCM DB copy functionality. Once you do this you will be on the SQLAnywhere DB and you won't run into the issue with the repair.
if you are running any OTHER DB - that is to say, you are not using the one installed with the product and you have a separate installation of the DB then you will NOT be affected by this issue. So if you're running DB2, Oracle, SQLAnywhere, HANA, MSSQL, etc from a separate source of installation, you are not going to be affected by running a repair.
Patrick -
CallManager upgrade from 3.3(5)es23 to 4.2(3) fails
Not having a lot of luck over on the Unified Communications Applications forum so thought I would post this here as well.
The CallManager upgrade from 3.3(5)es23 to 4.2(3) fails at installing SQL2000 SP4.
On the Publisher :
OS Image 2000.2.4
OS Service rel : 2000.4.3aSR9
OS Upgrade : 2000.4.3a
On the Subscriber :
OS Image 2000.2.4
OS Service rel : 2000.4.3aSR9
OS Upgrade : 2000.4.3a
SQL2K SP : SP3a(1.0.6)
The SQL version is too high to allow the Publisher to be patched to SQL2k
SP3a(1.0.6).
I have also donwloaded the SQL200 SP4 upgrade and tried installing that on the
Publisher but this fails also.
I did try upgrading the OS on both the Pub and Sub to 2000.4.4a with
2000.4.4aSR6 but the CallManager upgrade still failed at the SQL2000 SP4
upgrade phase of the installation.
Has anyone seen this happen before and know a solution? All suggestions very welcome.
Keith.SQL SP4 should be installed AFTER CallManager4.2(3) upgrading finished.
( Please refer to SQL SP4 readme.file from cisco , not from Microsoft)
Here is the basic task order:
OS upgrade->CCM upgrade->SQL SP4 upgrade.
My suggestion:
Restore your system to CCM3.3(5) ( find your backup data)
Then upgrade again.
Hope this help.
Howard
Please rate if this helps.
( I attached part of SQL SP4 readme file as follows:
SQL Server 2000 Service Pack 4 - (SQL2K-ServicePack4.1-0-3.exe)
Note: If you install SQL2K SP4 on a Cisco CallManager 3.3(5), or 4.0(2a) server,
you will not be able to upgrade the server to Cisco CallManager 4.1(2) later. If such an upgrade is required, you must upgrade the server to Cisco CallManager 4.1(2) before you install SQL2K SP4 -
I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
-
Is it really possible to upgrade from a Treo 650 to a Treo 750?
I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T) -
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
Can't print from IE 8 after upgrading from Vista to Windows 7
My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff -
Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0
Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
ShubhadaSAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH
Maybe you are looking for
-
How to delete the old schedule line release in apo
How to delete the old schedule line release (from current date) in apo which is having schedule firmed? Please suugest. Sunil
-
Clarification for the parser to be used in wls6.1
Hi, Let me confirm whether my underdstanding is correct becuase it was misleading on reading the FAQ of xml.Weblogic6.1 has two parsers xerces1.3.1 and weblogic fast parser and one cannot use any other version of xerces and xalan and can use any othe
-
ESYU: R12 - OM 화면에서 Item LOV를 control 하는 parameter나 Profile?
Purpose R12의 Sales Order find 화면의 Item LOV를 control 하는 parameter나 Profile은 무엇인지 알아본다. Solution R12에서는 System Parameter에 있는 'Item Validation Org' 값이 Item LOV 값을 control 한다. Navigation: 1. Using Order Management Super User responsibility 2. Setup > Sys
-
Hi all, We have three BSP applications running on Production Environment, but after applying Support Patches only two are running , and the third one is not running. But all three applications are running fine in Development, and Consolidation. Here
-
Why does my computer freeze on MAC OS X Lion?
Since my friend insalled MAC OS X Lion on his iMac Desktop Computer we have been having a lot of freezing and sometimes running slowly! Does anyone know what is going on with this or is it the iMac problem! My friend Jacob owns the 2 iMac Desktops th